AE CC does not quit after rendering to Apple Pro Res

Hi
It already started in AE CC when it came out and I thought it would be solved in version 2014.
But the problem remains. When I render a 90 minutes film (Apple Prores 444) with some corrections again to Apple Prores 444 (3 hours)
and I then want to quit AE it does not quit. I have to force quit all the time. It does not happen with short clips only with long rendering.
Regards,
Uli
AE CC 2014
Mac Pro
12-core
32 GB RAM
OSX Mountain Lion 10.8.5
Sonnet Raid DX800

Try Memory Diag - a free app that shows you what your memory is doing and allows you to purge the memory. I'm guessing you are just running out of memory and there's not enough to run the quit routines.
Rocky Sand Studio - Handmade Apps for Mac OS X
You might also want to hold down the shift key when you open the After Effects preferences and go to the bottom of the List to the Secret tab. You can set up a purge every x frames there that may help.

Similar Messages

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Ms updates does not work after recovery win 7 pro on dv4-2167sb

info on problems with MS updates right after a new install of win 7 pro: does not install updates and will not install SP1 from down load . I used recovery disks I made. The OS [win 7 pro] recovered great but MS updates did not work from the get-go.. {Personal Information Removed} HP NEEDS TO GET ME OS RECOVERY THAT WORKER I HAVE 4 OF THIS DV4-2167SB 'S
Been on the phone with hp [not US] for more than hr. talked to two svr. hungup on 3 times, HP needs some New VP's.

Hi VP_IA_DOT,
I saw your post and forwarded it to the right people for their review. You should hear back from someone shortly via private message on this Forum.
Thanks,
NicNac - HP Support Forums Moderator
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Render engine does not stop after reaching 100%

It looks like to me that the render engine does not stop after reaching 100%. It does not affect the rendered file which is fine and complete
-the Pause and Stop buttons are displayed but have no effect on pausing or stoping the render
-when I want to quit SG, it locks up and have to Force Quit to get out of it.
I really like the program though and hope you are going to fine tune the UI and make it look like After Effect and Premiere.
I would encourage you to instaure round tripping between these two apps and SG.
It would be nice to have curves as well.
Thanks guys
Brice

Could you open the defaultTrace.X.trc files and check for the errors?
Good from my point of view is to make a search if those files for some stack traces with the string ".dsr."
Regards,
Aleksandar

Access DB (& .ldb file) does not close after crystal reports

Post Author: mgold
CA Forum: Crystal Reports
Access DB (& .ldb file) does not close after crystal reports
Hi! We have a VB application using Crystal Reports 6 that has worked successfully on hundreds of systems for over 10 years. Now, on one network, the application and access database does not close. It seems to hang on the [.Close] command.
When we open the application an peruse the screens without opening up a report (using crystal reports), the application and access db closes fine. But as soon as we run a report and then close the report and try to close the application, the access db does not close. Many of the screens open the db and grab data from the access db, but it's only after running crystal reports that we have this problem. (Please see more information below.)
Setup: Application and data (access 97 db) reside on a server in the same folder, but application shortcut is kicked off on client PC. Kicking off the shortcut on the client PC means that the image/process runs on the client PC (not on the server). In this problem case, the application shortcut is on a Windows XP Pro Version 2002 SP2 PC with the app & data on a Windows 2003 server. Users are local Admins on their PCs with "Full Control"over the directory and files on the server where the data (access 97 db) resides. This type of setup is typical and has worked without any problems for clients.
The application is written in Visual Basic, using Crystal Reports 6 (using DAO). We close the recordset, set it to zero and then it hangs on closing the db (.Close command).
A few key pieces of information:
- The application closes fine if the app & data (access 97 db) are on a local PC. This includes closing fine if the application is run directly on the Windows 2003 server where the data is stored.
- It worked on this client's network until sometime in the last few weeks.
- One thing that changed is that the company is using VMWare on its servers. Not sure if they started using VMWare at the same time as it started failing. This may be unrelated. Possibly other things changed, but can't get any more information ... yet.
- It works fine running the application from a Windows Vista PC with a user who is a domain admin.
- The access db and application hang for about 10-20 minutes and then eventually closes. It appears that somehow
Crystal Reports is keeping the db open, but I'm not sure why.The application doesn't quit and the database doesn't close even if I try to end the task with the Task Manager.
- The Crystl32.ocx version being used is 8.0.0.4 (if that matters).
- I copied 6 month old program files and database files to a test folder on the Windows 2003 server. It fails using these files that worked fine 6 months ago.
Any ideas or help would be greatly appreciated! If you know of another good place to post this, please let me know.
Thanks!
- Mark

Crystal doesn't support tables in HTML interpretation.
You can probably work your way around this by doing Replace() calls on the relevant tags.
See:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033383334%7D.do
The supported HTML tags are:
" html
" body
" div (causes a paragraph break)
" tr (causes only a paragraph break; does not
preserve column structure of a table)
" span
" font
" p (causes a paragraph break)
" br (causes a paragraph break)
" h1 (causes a paragraph break, makes the font bold
& twice default size)
" h2 (causes a paragraph break, makes the font bold
& 1.5 times default size)
" h3 (causes a paragraph break, makes the font bold
& 9/8 default size)
" h4 (causes a paragraph break, makes the font bold)
" h5 (causes a paragraph break, makes the font bold
& 5/6 default size)
" h6 (causes a paragraph break, makes the font bold
& 5/8 default size)
" center
" big (increases font size by 2 points)
" small (decreases font size by 2 points if it's 8
points or larger)
" b
" i
" s
" strike
" u
The supported HTML attributes are:
" align
" face
" size
" color
" style
" font-family
" font-size
" font-style
" font-weight

10.2.8 Finder does not load after getting into OS X

I am pretty sure this happened to a lot of people, as I have read many many messages on this issue.
My computer is a Powerbook 867 with 128built in DDR and 512 added.
40Gb internal HDD and a 40GB firewire 3G ipod (the old 3G).
Here's the problem:
Last night just when I finishsed watching some divx on VLC running on 10.2.8, I quitted VLC using apple+Q, then closed the finder window i opened with apple+W. They both closed, but then the finder just did not respond (or have quitted). There isn't a little triangle below my finder icon on the dock. Everything else on the dock works perfectly fine. Desktop icons have disappeared.
Now I have restarted, nothing helps; went on apple discussion and found some "HELPFUL" solutions - deleting the finder preferences. First how was I suppose to delete it? ok... I installed a 10.2.3 on my ipod and boot it through there, also did a repair permission on my internal HDD. Finally deleted the com.apple.finder.plist.. So I booted up using my internal again. But still... finder DOES NOT LOAD after I got into my OS X.
Please if anyone can give me a solution to this problem!
P.S. the finder on my ipod is working fine. AND I do not want to reinstall OS X on my interal because I only did it last week after it went to service after a HDD fail (it has been replaced).
Powerbook 867Mhz 128+512MbDDR Mac OS X (10.2.x) 10.2.8

Check System Preferences - Accounts
Choose you account - login items: If iTunesHelper
shows up - remove it it will prevent re-installation.
It did not have iTunes in the list, just mail and iCal alarm. Deadlines and emails are vital in my home office.
Now that I think about it, adding Mail to the list was the only thing that I had changed to the computer when this happened, but I can't imagine how that would alter permission to install on the OS.
Eric
Note: I saw a G5 1.2 for $1,500 CAN. I was tempted.

Card slot does not work after update (14/10/2011)

Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
MacBook Pro 13 OS ver. 10.6.8

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Itunes does not work after Update any more

Itunes does not start after the uodate and cannot be reinstalled.
Seems not only a problem to me
Any solutions yet ?

Hello Wizzie71,
It sounds like you updated iTunes and now it will not open. Try the steps outlined in the following article. You may need to re install iTunes but your library will remain intact if you do.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Regards,
Sterling

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

Click to activate does not work after update

Click to activate plugin does not work after updating to version 23.0.1

hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

AE CC does not quit after rendering to Apple Pro Res

Similar Messages

Maybe you are looking for