AE CS4, not getting option to render to mp4 from the format option?
I had CS3 and I was able to do it but now with CS4 I only get options like FLV, Quicktime, Windows Media, Media Player but I don't see that option of H24 as I had on CS3. Do you guys know how to fix that issue please?
I am at work other wise I will post a picture of what I am trying to ask for help
Thank you guys!
Xeneize480, are you using the trial version of After Effects CS4? Some formats are not available for export in the trial. I'm not sure if MPEG4 and H.264 are among them, but they probably are.
When exporting to QuickTime with MPEG4 or H.264 codecs, keep in mind that you will be getting a QuickTime file that uses those codecs. Not a nativel MPEG4 file (.mp4 or .m4v). Outside of an app that can read .mov files, the file will require the QuickTime Player.
I'd like to emphasize that the MPEG export options from After Effects are capable of high-quality export. It uses the same export libraries used in Premiere Pro and Adobe Media Encoder. Dave LaRonde is correct that AE does not feature 2-pass VBR encoding, which you may need for some purposes. The quote of his above implies that AE is incapable of compressing a file of any quality, which is wrong. AE can compress video at high or low quality, you just need to tweak the settings to suit your purpose. If you do need 2-pass VBR encoding, After Effects CS4 includes Adobe Media Encoder, or as Dave mentions there are other tools you can use (but none of them can load your AE comp directly like AME does). The bottom line: know your tools, and use the right tool for the needs of the job. I don't think Dave LaRonde would disagree with that.
Here is the base page in After Effect Help regarding export settings. This section may be useful in helping you decide what format and settings to choose:
http://help.adobe.com/en_US/AfterEffects/9.0/WS3878526689cb91655866c1103a4f2dff7-79d0a.htm l
Similar Messages
-
JPA Error:Could not get a value to be injected from the factory
HI friends ,
I am trying to replicate the example JPAEXample01 using JPA in CE1 from the blogs written by
Sabine Heider/Adrian Görler.
During the testing of the method create employee i am getting the following error.
"Could not get a value to be injected from the factory."
I tried couple of examples using the above process, still held up with same error.
Any pointers to trouble shoot this ?
Thanks in advance
Chandra DasariHI Isaias Cristiano Barroso,
There are lot of enries most of them pertaining to properties set to yes or no.
out of which therre are tow errors. the log is as follows
Message Info: Failed (javax.management.MBeanPermission,#[:j2eeType=trace,name=EndToEndCentralMBean,],isActive,getGuidByName,getTraceLevelByName,getTraceLevelByName,importTrace,isFileExistsLocally,removeTraceFile)java.lang.reflect.InvocationTargetException
Failed (javax.management.MBeanPermission,*,DISPLAY)java.lang.reflect.InvocationTargetException
category: com.sap.security.core.role.PermissionData
Location:com.sap.security.core.role.PermissionData.get(ClassLoader)
Frankly the above log is above my understanding ,Prob it may help to you undertand my the issue
Thanks once again -
I can not get any app to finish loading from the app store. Anyone else having this problem?
Why has nothing been done on this? I still have this problem today on Chrome and on the latest OSX.
-
Hi friends,
Please provide some valuable inputs for the following scenario:
When a sales order line item is created(VA01) or changed(VA02) with reference to a Contract the open quantity is deducted in the contract which is a standard functionality. If the referenced line item is copied (custom enhancement to copy line item), then for the copied line item the open quantity is not getting deducted instead ATP quantity i.e. Available-to-promise is deducted.
Any inputs on how we can fix this functionality i.e. deduct the open quantity from the contract for the copied line item?
P.S. : Custom enhancement to copy line item is working fine, but open quantity is not getting deducted if the copied line item was referenced to a contract.
Thanks,
Sandeep
Message was edited by: sandeepSandeep,
Yes, that was my original interpretation. I was having a hard time believing that someone would ask such a question.
I guess, then, that you already know that you will have to add this logic to your enhancement. You should create your specifications and hand them off to a developer; ideally the one who created this enhanced solution in the first place.
I do not provide advice in these forums about details of enhanced solutions. Perhaps one of the other members will be more willing to do your work for you.
Best Regards,
DB49 -
my ipod says it is updated to most current 6.1.6, i use the rdio app and it worked but now with the update it needs 7.0 but i do not get option to update to this what do i do?
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.1.x
iPhone 4S iOS 8.x.x
iPhone 5 iOS 8.x.x
iPhone 5c iOS 8.x.x
iPhone 5s iOS 8.x.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 8.x.x
iPad 1 iOS 5.1.1
iPad 2 iOS 8.x.x
iPad 3 iOS 8.x.x
iPad 4 iOS 8.x.x
iPad Mini & Mini Retina iOS 8.x.x
iPad Air iOS 8.x.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
While calling i am not getting option to select sim1 or sim2
while calling i am not getting option to select either sim1 or sim2, suggest step wise process to follow.
Hi sanatankumarsahu,
You can select which SIM will be used for outgoing calls and outgoing messages by going into '''Settings''' > '''SIM Manager''' and then selecting your desired preferences for '''Outgoing calls''' and '''Outgoing messages'''.
Please let us know if you gave any other questions about your Firefox OS device.
Thanks,
- Ralph -
Profit Center is not getting captured in Vendor line item from MIRO.
Dear Friends,
Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
Looking forward for your kind cooperation in this matter
Thanks & Regards,
Naveen Kumar.Hello Naveen,
I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
- 826357 Profit Center Accounting and new general ledger in
I hope this helps. If not, please provide an example of your requirement.
Thanks and regards,
Suresh Jayanthi. -
Is there a way to stop the OS from switching to a newly opened app? I would like to be able to continue what I'm doing while I wait for an app to launch and not get interrupted by a forced entry into the app.
As an example, I'm going to my email in safari, while I wait for it to load, I open an excel document, and the OS decides excel should be the front app, so I go back to safari so I can enter my login info, but halfway through my password the OS decides that excel is where I should finish typing my password.
VERY ANNOYING. Can I open apps in the background?Thank you everyone for the suggestions. J D, I'm not a terminal fan, but I'm sure it works. I found a solution that I can use in the dock from another post.
Annoyed by Mac OS
Works great and allows me to maximize those multitasking minutes. -
I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?
I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck! -
Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server
Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...
-
I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month old?
I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month old?
-
The option "tell websites I do not want to be tracked" is missing from the Options Window/Advance/General/Browsing. How can I use and find the feature: I do no want to be tracked by websites? I am using Windows Vista, Firefox 8.0.1
That option has been moved to the Privacy tab in Options (first item).
*See --> https://support.mozilla.com/en-US/kb/how-do-i-turn-do-not-track-feature
*Do Not Track is voluntary; the site you are visiting must honor your request to not be tracked --> https://www.eff.org/deeplinks/2011/02/what-does-track-do-not-track-mean
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
Hey guys,
I am trying to charge my Iphone 4s and suddenly i can not get it to charge, what might be the problem?BrianAre you using a original USB cable? if not, than it could be the cable. If you are charging the iPhone with your computer, sometimes the USB port where you plugged in the cable stops working. plug it into a different USB port.
-
I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported."
Where is the Library? It needs to be on a disk formatted Mac OS Extended (Journaled)
-
After entering "Country or Region" United States, I do not get a next button to advance through the process. What might be the cause?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Maybe you are looking for
-
What are the difference in transaction codes in 4.6 C and ECC 6.0 HCM syste
Hi What are the difference in transaction codes in 4.6 C and ECC 6.0 in HCM SAP. Regards, Sanjay
-
How do I extract audio from a QT movie?
Hi all, I have a QT movie that I would like to extract the audio out of. Any ideas on the best way to accomplish this? Thanks, Ed
-
Panasonic BD87 WiFi Connection...
Greetings! We just recently purchased a Panasonic Viera plasma TV with a Panasonic BD87 BlueRay player. The Geek Squad set it up, and everything works fine except... The Blue Ray player won't maintain a connection to the internet. The connection
-
Is code generated for target "1.5" faster than for "1.1"?
Hi there! I am just interrested if it helps the JIT to compile classes with "-target 1.5", so that there are some metadatas in the classfiles or such stuff. Any numbers out there? Thanks in advance, lg Clemens
-
Hi Experts, Can anyone help me know about Decommision of bex query? What exactly is this?How is this done? and what could be the possible requirements behind decommisiong of a Bex Query? Thanks in advance, Vidya