AET field creation Error

Hi ,
I am getting an error "Field is zzXXX is already in use" while creating Field via AET.
It is not referencing to any enhancement ID.
Could any body tell What might be the issue behind this error.
Thanks in advance
Regards,
Anil

Hi sylvain,
Thanks for your response,
Its not showing any enhancement id in error message.
yes.I can able to create field with other names.
Is there any way to find enhancement id related to this field.
I checked in AXTSHOW but its is say no field exists.
Do have nay idea why only for this field it is showing error?
Regards,
Anil

Similar Messages

ABAP Query - Local field creation error

Hi,
In SQ01, I created a query. when i try to create local field EDIT>LOCAL FIELD>CREATE. Its throwing error 'Reference field does not exist' Message no. AQ273.Can anyone please tell me how to create local field then?
useful answers will be rewarded.
Thanks
Shameem.

Hi,
When creating a local field in a query, you need to define the type of data it will hold. There is a radio button to select a "reference field" or you can specify the type of data directly. I believe you got this error message because you selected reference field but specified no other field in the query to use as reference.
RaulV

Problem in database fields creation using default class of B1DE Wizard

Hi Experts
In an AddOn I am creating database fields in default class "Project_DB'. It does not give any message weather it creates fields or not. My code for database creation is given below
Namespace FormARE
    Public Class FormARE_Db
        Inherits B1Db
        Public Sub New()
            MyBase.New
            B1Connections.theAppl.StatusBar.SetText("Please wait. AddOn is updating database", BoMessageTime.bmt_Long, BoStatusBarMessageType.smt_None)
            Columns = New B1DbColumn() {New B1DbColumn("OCRD", "BondNo", "Bond No.", BoFieldTypes.db_Alpha, BoFldSubTypes.st_None, 20, New B1WizardBase.B1DbValidValue(-1) {}, -1), New B1DbColumn("OCRD", "BFrDate", "Bond From Date", BoFieldTypes.db_Date, BoFldSubTypes.st_None, 10, New B1WizardBase.B1DbValidValue(-1) {}, -1), New B1DbColumn("OCRD", "BTDate", "Bond To Date", BoFieldTypes.db_Date, BoFldSubTypes.st_None, 10, New B1WizardBase.B1DbValidValue(-1) {}, -1), New B1DbColumn("OINV", "Cntner_no", "Container No.", BoFieldTypes.db_Alpha, BoFldSubTypes.st_None, 20, New B1WizardBase.B1DbValidValue(-1) {}, -1), New B1DbColumn("OINV", "Cntnr_Seal", "Container Seal No.", BoFieldTypes.db_Alpha, BoFldSubTypes.st_None, 20, New B1WizardBase.B1DbValidValue(-1) {}, -1), New B1DbColumn("OINV", "Cust_Seal", "Custom Seal No.", BoFieldTypes.db_Alpha, BoFldSubTypes.st_None, 20, New B1WizardBase.B1DbValidValue(-1) {}, -1), New B1DbColumn("OINV", "ctryOrgn", "Country of Origin", BoFieldTypes.db_Alpha, BoFldSubTypes.st_None, 20, New B1WizardBase.B1DbValidValue(-1) {}, -1)}
            GC.Collect()
            B1Connections.theAppl.StatusBar.SetText("Successfully updated database", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
        End Sub
    End Class
End Namespace
It does not give first message. and second message come properly and immediately when I start the AddOn. I checked it makes all fields accuratly. But when I open the related form it gives error message "Data Source not found". I checked fields name are same as used in form and database .What can the reason? Should I use a simple function for creation of database fields which will run when a button is pressed? Is it fine to using default class for database fields creation?
Thanks
Best Regards
Jitender

I solved the problem.
Procedure I followed :
UNINSTALL ORACLE WRAEHOUSE BUILDER SOFTAWARE.
'GLOBAL_NAMES = FALSE' in init.ora file.
RESTARTED MY MACHINE.
INSTALL THE ORACLE WRAEHOUSE BUILDER SOFTAWARE.

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

Field Selection error for movement type and G/L account

I am currently experiencing a field selection error between movement type 601 and G/L account 7140000. The problem field is 'Segment'. This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
Many Thanks

Hi,
On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
Regards
Chandra Shekhar

How to delete custom AET fields in CRM 7.0 Web UI

Hello gurus,
When I want to delete a custom AET field created by a mistake or for exercising purposes only, the UI Config tool markes it for deletion by changing a status to "Marked for Deletion" (a garbage bucket icon). My question is how to proceed further, i.e. eliminate the field completely. Do I need to manually delete the fields from the "Append" structures in the corresponding CRMS_xxxx Attribute structure, or do something like this?

Hi,
note: please do not delete the field manually from SAP GUI.
AET is able to create and delete custom field. The deletion process happens always in 2 steps.
1. you select which field you want to delete and press on delete icon. This will mark the field to be deleted.
As long, you do not "Save and Generate". This deletion mark will not be persisted and the complete deletion of the field will not be executed. Having this mechanism, you are always able to cancel the deletion.
2. If you really want to delete the field. Press on "Save and Generate". "Save" will persist the deletion mark for the field.
And "Generate" will do the "Delete" generation.
Please don't forget to remove the field from the UI configuration, when you configured the field in any UI Config before.
Regards,
Steve

Service Contracts Billing Schedule Creation Error

Hi,
I have a requirement of creating service contracts from back-end for which I am using the oks_contracts_pub.create_contract_header, create_service_line, and create_bill_schedule. I am creating my contracts with active status and renewal type of EVN (Header level), FUL(Line Level). My contract is of type subscription. The contract header and line are creating fine but the Bill schedule API is throwing an UNEXPECTED ERROR. The billing schedules need to be created based on accounting rule which can be quarterly or monthly. I have included the bill schedule code (hard coded values) for review. Any help is greatly appreciated.
Also the version I am working on is R12
________________________________________________CODE___________________________________________________________________
CREATE OR REPLACE PROCEDURE BILLING_SCHEDULE AS
l_strm_level_tbl OKS_BILL_SCH.STREAMLVL_TBL;
v_bill_qtrs NUMBER := 0;
v_bill_mths NUMBER := 0;
v_bill_days NUMBER := 0;
v_net_amount NUMBER := 468;
v_acct_rule_name VARCHAR2(50) := 'QUARTERLY';
v_amt_per_day NUMBER;
x_error_locator VARCHAR2(2000);
v_start_date DATE := '04-MAY-2010';
v_end_date DATE := '25-MAY-2010';
x_return_status VARCHAr2(3);
x_msg_count NUMBER;
x_msg_data VARCHAR2(2000);
v_billing_sequence NUMBER;
x_chr_id NUMBER := 17000;
x_line_id NUMBER := 223248604345353294444923586786456728480;
g_day_uom VARCHAR2(10) := 'DAY';
g_month_uom VARCHAR2(10) := 'MTH';
g_quarter_uom VARCHAR2(10) := 'QTR';
v_amt NUMBER;
v_invoicing_rule_id NUMBER := -2;
BEGIN
--Create Billing Schedule based on accounting rule
okc_context.set_okc_org_context;
MO_GLOBAL.INIT('OKS');
MO_GLOBAL.SET_POLICY_CONTEXT('S', 83);
v_bill_qtrs := 0;
v_bill_days := 0;
v_bill_mths := 0;
SELECT NVL(v_net_amount, 0)/(v_end_date - v_start_date)
INTO v_amt_per_day
FROM dual;
dbms_output.put_line('Calculated amt per day ' || v_amt_per_day);
IF v_acct_rule_name LIKE '%QUARTERLY%' THEN
--Quarterly billing schedule
SELECT FLOOR(MONTHS_BETWEEN( v_end_date,
v_start_date)/3),
v_end_date - ADD_MONTHS(v_start_date, (FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)/3)*3))
INTO v_bill_qtrs,
v_bill_days
FROM dual;
dbms_output.put_line('Calculated the qtrs and days');
IF v_bill_qtrs > 0 THEN
SELECT (ADD_MONTHS(v_start_date, (FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)/3)*3)) - v_start_date)*v_amt_per_day
INTO v_amt
FROM dual;
dbms_output.put_line('Calculated qtr amt');
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
-- l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_quarter_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := 1;
l_strm_level_tbl(v_billing_sequence).level_periods := v_bill_qtrs;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_amt/v_bill_qtrs;
l_strm_level_tbl(v_billing_sequence).level_amount := v_amt/v_bill_qtrs;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for QTR');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for QTR');
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Quarterly schedule creation error ' || x_msg_data);
---DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
-- RETURN;
END IF;
END IF;
IF v_bill_days > 0 THEN
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
dbms_output.put_line('sequence '||v_billing_sequence);
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
--l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_day_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_periods := 1;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_net_amount;--v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_amount := v_net_amount;--v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for QTR days');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for QTR days ' || v_bill_days || ' ' || x_return_status);
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Day schedule, for quarterly accounting rule, creation error ' || x_msg_data);
--DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
--RETURN;
END IF;
END IF;
ELSE
--Monthly billing schedule
SELECT FLOOR(MONTHS_BETWEEN( v_end_date,
v_start_date)),
v_end_date - ADD_MONTHS(v_start_date, FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)))
INTO v_bill_mths,
v_bill_days
FROM dual;
dbms_output.put_line('Calculated the mths and days');
IF v_bill_mths > 0 THEN
SELECT (ADD_MONTHS(v_start_date,FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date))) - v_start_date)*v_amt_per_day
INTO v_amt
FROM dual;
dbms_output.put_line('Calculated the mths amt');
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
--l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_month_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := 1;
l_strm_level_tbl(v_billing_sequence).level_periods := v_bill_mths;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_amt/v_bill_mths;
l_strm_level_tbl(v_billing_sequence).level_amount := v_amt/v_bill_mths;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for MTHS');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for MTHS');
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Monthly schedule creation error ' || x_msg_data);
--DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
--RETURN;
END IF;
END IF;
IF v_bill_days > 0 THEN
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
--l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_day_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_periods := 1;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_amount := v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for MTH days');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for MTH days');
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Day schedule, for monthly accounting rule, creation error ' || x_msg_data);
--DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
--RETURN;
END IF;
END IF;
END IF;
COMMIT;
EXCEPTION
when others then
dbms_output.put_line('Error ' || sqlerrm);
END;
Thanks,
Yash.

Hi There,
I have a similar requirement to create rental service contracts and create billing schedules.
Can you please pass on your functional docs so that i can refer to them.
Thanks,
Raidu

How to Make Field "Creation Date" Mandatory (in EP Selection Screen)

Dear experts,
I am on SRM 7.0.
In Shopping Cart, i'd like to set Field "Creation Date" as Mandatory Field in EP Selection Screen / Criteria Maintenance.
Is there BADI or SPRO need to be maintained?
Thanks & regards,
Jack
Edited by: Jack4ever on Aug 9, 2011 7:42 AM
Edited by: Jack4ever on Aug 9, 2011 7:43 AM

Hi Jack,
Not sure if it possible in standard with any customizing but it might be able to achieve this through webdynpro enhancements.
Regards,
Prasanna

Request creation error for mitigation control workflow

Dear Expert,
         I had activiate the workflow from RAR to CUP on Mitigated User assignment, I had completed following customizing:
1)RAR->configaration->Workflow
2)CUP->configaration->initiator, stage, path.
but when I created mitigated user assignments in RAR, after click "Submit", error popup: "Request creation error"
can some one help?
thanks!

Dear,
     the log is below:
ERROR       service 'SAPGW00' unknown
TIME        Thu May 20 13:33:16 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      niuxi.c
LINE        1732
DETAIL      NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER     375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR       service 'SAPGW00' unknown
TIME        Thu May 20 13:33:16 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      niuxi.c
LINE        1732
DETAIL      NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER     375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR       service 'SAPGW00' unknown
TIME        Thu May 20 13:33:16 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      niuxi.c
LINE        1732
DETAIL      NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER     375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR       service 'SAPGW00' unknown
TIME        Thu May 20 13:33:16 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      niuxi.c
LINE        1732
DETAIL      NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER     375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR       service 'SAPGW00' unknown
TIME        Thu May 20 13:33:16 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      niuxi.c
LINE        1732
DETAIL      NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER     375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR       service 'SAPGW00' unknown
TIME        Thu May 20 13:33:16 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      niuxi.c
LINE        1732
DETAIL      NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER     375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR       service 'SAPGW00' unknown
TIME        Thu May 20 13:33:16 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      niuxi.c
LINE        1732
DETAIL      NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER     375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR       service 'SAPGW00' unknown
TIME        Thu May 20 13:33:16 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      niuxi.c
LINE        1732
DETAIL      NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER     375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR       service 'SAPGW00' unknown
TIME        Thu May 20 13:33:16 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      niuxi.c
LINE        1732
DETAIL      NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER     375
May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
INFO: Exception in Server YYY:
com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
ERROR       service 'SAPGW00' unknown
TIME        Thu May 20 13:33:16 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      niuxi.c
LINE        1732
DETAIL      NiPGetServByName2: service 'SAPGW00' not found
SYSTEM CALL getservbyname_r
COUNTER     375
May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
INFO: END POOINT URL: http://9.186.143.129:50100/AEWFRequestSubmissionService_5_2/Config1?style=document
May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
INFO: before submit:
May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
INFO: wftype: MITIOBJ reqid: GRC01
May 20, 2010 2:10:50 PM com.virsa.cc.rulearchitect.dao.dto.MitObjDTO getObjContext
FINEST: validfrom: 2010-05-20 validto: 2011-05-20
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: MITREFNO
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: MOMITREFNO
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: CT01
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: RISKID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: MORISKID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: ZC02
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: LANG
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: LANG
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: EN
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: MONITORID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: MONITORID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: GRC01
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: Integer
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: STATUS
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: MOSTATUS
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: 0
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: DATE
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: VALIDFROM
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: VALIDFROM
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: 05/20/2010
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: DATE
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: VALIDTO
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: VALIDTO
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: 05/20/2011
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: BU ID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: BUID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: null
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: Approver ID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: MOAPPROVERID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: null
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: OBJTYPE
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: OBJTYPE
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: U
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Data Type: String
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Descripton: OBJID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Name: OBJID
May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
INFO: Value: 207471
May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
INFO: Return code: 2010 Message: com.virsa.ae.core.ObjectNotFoundException: Invalid Priority Value : MO_HIGH workflow id: null Status: null
May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
WARNING: 2010: null

How to fix the field level Error(Invalid Date)

Hi All,
Error: 1 (Field level error)
  SegmentID: ACK
  Position in TS: 5
  Data Element ID: ACK05
  Position in Segment: 5
  Data Value: 162014
  8: Invalid Date
can anyone help me out, How to fix above error? i searched about this but only information about the error is given and no where it is mentioned how to fix it and how is it generated please help me out.
Thanks,
Nitish

Are you sending or receiving the EDI?
Either way, "162014" is simply not a valid EDI data format. Dates in x12 are expressed as CCYYMMDD so December 30, 2013 would appear as 20131230.
If you are receiving, you need to contact the sender and have them correct the output.
If you are sending, you need to property format that date value. For example:
myDateVar.ToString("yyyyMMdd");

How can I resolve Exception : "Count Field Incorrect" error

Hi all,
I am experiencing with "Count Field incorrect" error. What's wrong with it? How can I resolve it?
This error is occured at UPDATE function of SQL. My JSP page is to update the old record.
Sometimes, "Update statement error" message appear. These two problems I always confusing.
What are the possible point of these error in my Java file and JSP page? I use package import to JSP Page.
Pls help me.
With thanks,

Thanks,
Your URLs help me exectly. But after I have changed my code, the error is changed to "Too Few Parameters : Expected 35". What's wrong with it? The following is my code.
try {
String DRIVER = ("sun.jdbc.odbc.JdbcOdbcDriver");
String URL = "jdbc:odbc:Industrial_One_DSN";
String sql = "UPDATE BusinessRegistration " +
"SET [Date] = ?, ISIC = ?, BizName = ?, BizAddress = ?, " +
"OwnerName = ?, OwnerNRC = ?, Investment = ?, EstablishedYear = ?, " +
"L_Male = ?, L_Female = ?, F_Male = ?, F_Female = ?, " +
"OwnershipType = ?, Remarks = ?, IndustialZoneName = ?, Unit = ?, " +
"Fuel = ?, FactoryType = ?, FactoryName = ?, Township = ? " +
"MainProductName = ?, MainProductCountType = ?, " +
"MainProductQuantity = ?, MainProductValue = ?, RMName = ?, " +
"RMCountType = ?, RMQuantity = ?, RMValue = ?, EnergyName = ?, " +
"MachinePower = ?, AmountGallon = ?, StateDiv = ?, BizSize = ? " +
"WHERE RegistrationID = ?";
Class.forName(DRIVER);
Connection con = DriverManager.getConnection(URL);
PreparedStatement pstmt = con.prepareStatement(sql);
int ilmale = Integer.parseInt(lmale);
int ilfemale = Integer.parseInt(lfemale);
int ifmale = Integer.parseInt(fmale);
int iffemale = Integer.parseInt(ffemale);
int impq = Integer.parseInt(mpq);
int impv = Integer.parseInt(mpv);
int irmq = Integer.parseInt(rmq);
int irmv = Integer.parseInt(rmv);
int iamountgallon = Integer.parseInt(amountgallon);
pstmt.setString(1, date);
pstmt.setString(2, isic);
pstmt.setString(3, bizname);
pstmt.setString(4, bizaddress);
pstmt.setString(5, ownername);
pstmt.setString(6, ownernrc);
pstmt.setString(7, investment);
pstmt.setString(8, eyear);
pstmt.setInt(9, ilmale);
pstmt.setInt(10, ilfemale);
pstmt.setInt(11, ifmale);
pstmt.setInt(12, iffemale);
pstmt.setString(13, ownershiptype);
pstmt.setString(14, remark);
pstmt.setString(15, izn);
pstmt.setString(16, unit);
pstmt.setString(17, fuel);
pstmt.setString(18, ft);
pstmt.setString(19, fname);
pstmt.setString(20, township);
pstmt.setString(21, mpn);
pstmt.setString(22, mpct);
pstmt.setInt(23, impq);
pstmt.setInt(24, impv);
pstmt.setString(25, rmname);
pstmt.setString(26, rmct);
pstmt.setInt(27, irmq);
pstmt.setInt(28, irmv);
pstmt.setString(29, ename);
pstmt.setString(30, mpower);
pstmt.setInt(31, iamountgallon);
pstmt.setString(32, statediv);
pstmt.setString(33, bizsize);
pstmt.setInt(34, Integer.parseInt(rid));
pstmt.executeUpdate();
}I have got 35 fields in my db. But i wanna edit 34 fields only. I have no primary key in my table. Is't alright?
pls keep on helping me.
With thanks,
WTDAHL

Delivery Note to Subcontract creation error "Essential transfer parameters

Hi
I am facing issue in return delivey
Delivery Note to Subcontract creation error "Essential transfer parameters are missing in record:000001".
Could you please let me know the casue of this error and where exactly i can see error.
Regards
vikcy

Hi Vicky,
Check If the Customer number(Plant) has been maintained in the vendor master record control data and the vendor should also be maintained in the customer master data. Once you maintain this system determines the shipping point based on the customer master and the shipping data missing. Kindly try delivering after maintaining these and let me know If you need any more information on this.
Regards
Ram Pedarla

* is missing for required field in error message

Hi all,
I am using JDeveloper 11.1.1.2 with ADF BC. I have a simple form in a jspx with some fields for user to input.
The page contains 3 mandatory fields (simply set required=true): Surname, Name and Title. Where Surename and Name are inputText, and Title is a Select One Choice with List Of Value defined in VO.
If user submit data without anything in the required fields, an error message will popup. But the content of the error message is not quite correct!
All the required inputText has a prefix: *, but Select One Choice do not have a leading *.
Error
Messages for this page are listed below.
* Surname You must enter a value!
* Name You must enter a value!
Title You must enter a value! is there anyway to add a * to the error message for Select One Choice? or remove all the *? It looks very confusing.
Thanks in advanced,
Samson Fu

not sure,
but try to set the ShowRequired for this LOV in property inspector to true

Field Attribute Error

Hi All,
i am working on a upgrade project from 46c to ECC 6.
we are facing field attribute error "No write access to reference CONTROL takes place".
the error is been pointed in data declaration ' DATA: CONTROL TYPE REF TO I_OI_OLE_CONTAINER_CONTROL."
can anyone suggest solution for this?

Hi,
I am using table element, I would like to explain my problem with an example.
now suppose there are 5 rows and 3 columns in my table element with all the fields mandatory, and at runtime i fill up the table columns while keeping any fields empty. Now my requirement is to highlight those perticular cells which are empty.
I have written my validation code in one of the component controller method.
Pls suggest.
I am pasting teh code snippet.
* get all declared attributes
node_t_bknvi->get_static_attributes_table(
    IMPORTING
      table = tabl_t_bknvi ).
LOOP AT tabl_t_bknvi INTO stru_t_bknvi.
    IF stru_t_bknvi-taxkd IS INITIAL.
*     report message
      CALL METHOD l_message_manager->report_attribute_error_message
        EXPORTING
          message_text   = 'Input Required Fields'
          element        = elem_t_bknvi
          attribute_name = 'TAXKD'
*        PARAMS         =
*        MSG_USER_DATA =
    ENDIF.
ENDLOOP.

Child creation Error on vms HELP

Hi,
Iam trying to execute a file from withing a java program on VMS This is my code
public class BAMBOE {
public static void main(String[] args) {
    BamboeRunner boe = new BamboeRunner();
    boe.start();
import java.io.*;
public class BamboeRunner extends Thread implements Runnable {
public void run() {
    try {
      Process process = Runtime.getRuntime().exec("@SIMPEL");
      process.waitFor();
      return ;
    catch (Exception e) {
      e.printStackTrace();
      return ;
}But I keep getting the following error:
java.io.IOException: Child creation error: error 100052
VMS error code: error 100052
        at java.lang.UNIXProcess.<init>(Compiled Code)
        at java.lang.Runtime.exec(Compiled Code)
        at java.lang.Runtime.exec(Compiled Code)
        at BamboeRunner.run(Compiled Code)Anybody that can help me fix this problem please??

I've managed to get somewhere with this...
I've got it to work by having the system command I want to run in a com file and specifying the full path to that file in the exec method without the '@'...
e.g.
Process proc = Runtime.getRuntime.exec("ppoi_dev:[user.dba_ppoi.matt.proc]proc.com");
where the file
ppoi_dev:[user.dba_ppoi.matt.proc]proc.com
contains
$ dir
When I run this I can get the output from the dir command by reading from the InputStream of the Process object.
Have fun.

AET field creation Error

Similar Messages

Maybe you are looking for