Af:panelTabbed get currently displayed tab

Hello
I'm using JDeveloper 11.1.1.0.2. I have a af:panelTabbed in my application and I want to be able to call a method in my backing bean when the current tab is switch to another.
Or can I at some point programatically get the currently displayed tab ?
Thank you!
Angel

Hi,
you may need to give us more information on this usecase. What is contained on the tabs? If you can, what is the display in FF ? Note that tabs work fine for me so moe information is needed
Frank

Similar Messages

How to get current displayed position of an item in listcontrol ?

Hi,
can anyone please help me to get current displayed position of an item in a listbox control in vc++ mfc. I am using CListCtrl class to manipulate.
Thanks,
saffiuddin

On 4/11/2015 3:45 AM, "David Lowndes [MVP]" wrote:
can anyone please help me to get current displayed position of an item in a listbox control in vc++ mfc. I am using CListCtrl class to manipulate.
Have you tried GetItemPosition?
... or GetItemRect (a bit more information).
Igor Tandetnik

How to get current active tab (Detailitem)

Hello,
i have searched everywhere and still can't find a solution for such simple task. I want to get the current active Detailitem value (af:showDetailitem) from a panelTabbed (using java class)
Working on Jdeveloper 11.1.2.4.0,
can you help me please?

Was hoping something more abstract solution, like getting the current instances of active tabs and find out what is the active at that running moment. Ah well, its 2013 and still disappointed by Java.
Thanks a lot for your help Subramanina, i used something similar to your suggestion:
1) i have change my main function, and set it to accept a string (that will be the tab's id) for my purpose
2) on each tab, i add a disclosure event function. Inside that, i just simply save the tab's id on a private variable. So when ever
i want the current active tab id, i just get that variable's value.
3) PartialTrigger the panel with tabs
Almost the same solution with yours, just mine is less professional since i lost you there

Adobe DPS Reading SDK: how to get currently displaying page orientation?

Hi All,
I've been trying to extract page/article information using the Adobe DPS Reading SDK.
There is a tutorial (New APIs and features in r30, including folio navigation, article metadata and calendar events | Adobe Developer Connect…) which i've heavily reused but there is on last thing in the puzzle that I need to extract.
I need to extract the page layout / orientation when displayed on a device.
adobeDPS.folioDataService only extract article metadata and those methods do not contain any reference to orientation or layout.
Interesting enough, i was able to locate a "ApplicationState" object which is produced from the ConfigurationService.( Adobe DPS - Reading SDK 2.30 : adobeDPS-ConfigurationService : JsDoc Reference )
I haven't try this the "orientation" field description is not exactly what i want: "The orientations this view supports."
I need the: orientation which i'm currently displaying this page.
Any thoughts? Should i be using a different SDK?
Your help is very appreciated.
Regards

You can use the javascript native attribute "window.orientation".
Something like this should work:
    function currentOrientation(){
          switch(Math.abs(window.orientation)){
               case 90:
                     alert('landscape');
                     break;
               default:
                    alert('portrait');
                    break;
window.addEventListener('orientationchange' , function(){ currentOrientation() });
//Call it first if needed
currentOrientation();

Do Controls/Indicators in all display tabs get updated even if not visible?

I have a pretty simple Labview VI that I need to run at a 10 ms loop. Currently, I can only get it to run at 17 ms. It has a RS422 that has to send and receive a message every 10 ms. I have a lot of troubleshooting indicators on a Debug Tab. I am wondering if these indicators are being updated even though they are not on the currently displayed tab. If so, will changing the "visible" property node of all these indicators speed up execution?
Thanks,
Solved!
Go to Solution.

Hello tootalled,
Do you happen to have synchronous display enabled? In most applications, having asynchronous display enabled significantly speed up execution without affecting what the user sees. For example, you can update a Boolean value hundreds of times in a second, which is more updates than the human eye can discern. Asynchronous displays permit the execution system to spend more time executing VIs, with updates automatically reduced to a slower rate by the user interface thread.
If you want asynchronous displays, right-click the control or indicator and select Advanced»Synchronous Display from the shortcut menu to uncheck the menu item.
Please see this document regarding VI execution speed: http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/vi_execution_speed/
Like crossrulz said, I also recommend using the Producer/consumer architecture. This way, you can process your data in one loop, pass the data via a queue, and update your indicators in a separate loop that does not affect the speed of your processing vi.
K. Anderson
Applications Engineer
National Instruments

How to get current tab name or tab id or related info?

Hi ,
I would like to hide/show tabs according to users' page privileges list. So I need get current tab ID or tab Name in runtime environment to know if show/hide it for current user. :APP_USER
Could you please provide any info about this requirement? Or do you have alternative method to control tabs' hide/show?
thanks
Ruiping

最爱用中文 wrote:
Hi Jari,
Thanks for your info. Even if set authorize schema to tabs, I still need to get the relationship between "current tab" and "privilege&users". So I think evrm's hard-code method above is avaliable.I agree with Jari: APEX provides Authorization schemes specifically for this purpose. You need to reverse your thinking on how to implement this.
For more information consult the documentation on APEX security, specifically using authorization schemes to restrict access to pages and control rendering of components.
Tutorial: Adding Security to your Database Application (APEX 4.0)
Use Authorization Schemes to control access/rendering for security ("only managers see/access this page and it's associated tab"); and Conditions to control rendering for functional reasons ("region only displayed if account is in arrears").
Authorization Schemes have the benefits of being reusable, performing better, and allowing central maintenance of security-related code. This makes it easier to change the implementation—say moving from role information held in database tables to groups defined in LDAP.
I worked for a number of years with an application where authorization schemes are not properly used (decisions made before my involvement) and all security and business logic relating to rendering and processing is wrapped up in spaghetti code in conditions. It's impossible to maintain.
It is of course advisable to make both authorization scheme and business logic condition code more reusable and maintainable by locating it in API packages.

How do i get the acrobat tab to display in Word 2013?

how do i get the acrobat tab to display in Word 2013?
i have Adobe Acrobat 11 Pro for Windows. In Word, it's in the Add-Ins area, and set to display at startup, but it doesn't.

Are you running at least version 11.0.1 of Acrobat? Have you checked to make sure the add-on isn't on the disabled list for Word 2013? This is done under the Word Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Disabled Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click Disabled Items, and then click Go.
Select the add-in and click Enable.
Click Close.

How to get and display current year

hi,
how to get and display current year
and need it to convert numeric format if it is orginally
in character format.

Hi,
chk this FM.
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    BUKRS         = '1000'     " Company Code
    DATE          = SY-DATUM   " Date to find fiscal year for
IMPORTING
    CURRM         = w_currm    " Current Fiscal Month
    CURRY         = w_curry    " Current Fiscal Year
    PREVM         = w_prevm    " Previous Fiscal Month
    PREVY         = w_prevy.   " Previous Fiscal Year
rgds
anver
if hlped pls mark points

Get the name of the jsp currently displayed

Hi,
how can i get the name of the jsp currently displayed?
Thanks.

Yep
I thought about
UIViewRoot viewRoot = FacesContext.getCurrentInstance().getViewRoot();
String name = viewRoot.getViewId(); Message was edited by:
nereidahoxhaj

What type of form need to be using to get Display tab on the Section Properties of my Optional Section?

What type of form need to be using to get Display tab on the Section Properties of my Optional Section?
CRISTINA&amp MICROSOFT Forum

Hi perezco,
Are you using SharePoint?
Please provide more information and screenshots about this issue.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

After the currently active tab is closed, can the previously acitve tab be automatically displayed?

After the currently active tab is closed, I don't want to see the tab on its right or on its left. I want to see the tab that was active before the closed one, whatever its position is on the tab strip.
Can that be achieved?

My trackball has 4 buttons and a scroll wheel. Each of the 4 buttons is programmable. The 4 buttons are normally pre-programmed for single-click, double-click, drag and right-click by simply pressing on them
Each of the 4 buttons may be programmed to also have other functions. For example, I programmed "control/single-click" to produce a middle click. I could also have used "shift/single-click" or "alt/single-click" to produce the middle-click. Or I could have similarly programmed double-click or drag or right-click. The Kensington Expert Mouse is quite versatile ... once you get the hang of programming it.
I have had it for about 4 years and I had never had the need to program one of them until you told me about using a middle-click.
Milt Beychok

Get current event in iCal

I'm trying to create a script that would run as a trigger to set my away message in Adium to currentEventName - eventLocation
Theoretically, my code works, and it does... sometimes. I figure there is some bug in it I'm just missing. Any help would be appreciated. Note that this has to work for for repeated items. I have cut the date off at the minute since the date and time has to be exact - unless of course you know of a way to fix this. Thanks. Below is the code.
set myEvent to "Unknown Event"
--gets the current date minus the time
set curDate to (weekday of (current date)) & ", " & month of (current date) & ¬
" " & day of (current date) & ", " & year of (current date) as string
set curTime to round ((time of (current date)) / 60) rounding down
set curHour to round (curTime / 60) rounding down
set curMin to curTime mod 60
--fixes the 0 problem
if curMin < 10 then
set curMin to "0" & curMin as string
end if
if curHour > 12 then
set today to curDate & " " & curHour - 12 & ":" & curMin & ":00 PM" as string
else
set today to curDate & " " & curHour & ":" & curMin & ":00 AM" as string
end if
--today should now be the correct time without the seconds
set today to date today
tell application "iCal"
repeat with i from 1 to count of every calendar
if myEvent is "Unknown Event" or myEvent is {} then
set myEvent to (summary of every event of calendar i whose start date is today)
set myPlace to (location of every event of calendar i whose start date is today)
end if
end repeat
end tell
if myEvent is {} then
set myEvent to "Unknown Event"
--display dialog "No event on " & today
end if
if myPlace is {} then set myPlace to "Unknown location"
set myAway to myEvent & " - " & myPlace as string
tell application "Adium"
set my status type to away
set my status message to myAway
end tell
PowerMac G5 DP 2.0Ghz Mac OS X (10.4.6) 1.5GB RAM, 160GB SATA HD, 160GB ATA HD (enclosure)

Apparently, it works even faster if executed from iCal (as opposed to running with the events tab closed).
There were a couple of minor bug fixes, but I've tested it on a fake repeated event, and will see if it really works tomorrow.
Known bugs:
does not work for daily
does not work for monthly (ie, things on the third sunday)
For now though, this is fine as almost all my things are custom weekly events.
Here's the code:
--Get current time, current time without seconds, and day abbreviation
set current_date to (current date)
set today to current_date - (seconds of current_date)
set now to (time of (current date)) - (seconds of (current date))
log now
log today
set thisYear to year of (current date) as number
set thisMonth to month of (current date) as number
set thisDay to day of (current date) as number
set thisDate to characters 1 thru 2 of (weekday of (current date) as string) as string
log thisDate
--Init vars
set freq to ""
set interval to ""
set endDate to ""
set myEvent to ""
set myPlace to ""
set setBool to false
tell application "iCal"
repeat with i from 1 to count of calendars
if setBool is true then exit repeat
repeat with j from 1 to count of events of calendar i
set rec to recurrence of event j of calendar i as string
set curDays to my getDays(rec, j, i)
if thisDate is in curDays then --Check if the event ocurrs today
set endDate to my getEnd(rec, j, i)
--If the end date is equal or greater to the current date (minus seconds)
if item 3 of endDate ≥ thisYear and (item 2 of endDate > thisMonth or (item 2 of endDate = thisMonth and item 1 of endDate ≥ thisDay)) then
set eventStartTime to (start date of event j of calendar i)
set eventStartTime to (time of eventStartTime) - (seconds of eventStartTime)
if eventStartTime is now then
set myEvent to summary of event j of calendar i
set myPlace to location of event j of calendar i
set setBool to true
exit repeat
end if
end if
end if
end repeat
end repeat
end tell
try
if myEvent is "" then set myEvent to "Unknown Event"
on error
set myEvent to "Unknown Event"
end try
try
if myPlace is "" then set myPlace to "Unknown Location"
on error
set myPlace to "Unknown Location"
end try
set myAway to myEvent & " - " & myPlace as string
if myAway is "Unknown Event - Unknown Location" then set myAway to "Out. Call the cell."
tell application "Adium"
set my status type to away
set my status message to myAway
end tell
--display dialog myAway
(* Parse Recurrence *)
on getFreq(str)
try
return word 3 of str
on error
return ""
end try
end getFreq
--Not used right now, but I feel it should be...
on getInterval(str)
try
return word 6 of str
on error
return ""
end try
end getInterval
on getStartDay(eventNum, calNum)
tell application "iCal"
set startDay to items 1 thru 2 of (start date of event eventNum of calendar calNum as string) as string
end tell
return startDay
end getStartDay
on getEnd(str, eventNum, calNum)
try
set endDate to items 1 thru 8 of word 9 of str as string
set endYear to items 1 thru 4 of endDate as string
set endMonth to items 5 thru 6 of endDate as string
set endDay to items 7 thru 8 of endDate as string
set endYear to endYear as number
set endMonth to endMonth as number
set endDay to endDay as number
log {endDay, endMonth, endYear}
on error --It isn't a recurring event
tell application "iCal"
set endDate to end date of event eventNum of calendar calNum
set endYear to year of endDate as number
set endMonth to (month of endDate) as number
set endDay to (day of endDate) as number
log {endDay, endMonth, endYear}
end tell
end try
return {endDay, endMonth, endYear}
end getEnd
on getDays(str, eventNum, calNum)
set dayList to {"MO", "TU", "WE", "TH", "FR", "SA", "SU"}
set recDays to {getStartDay(eventNum, calNum) of me}
log recDays
try
repeat with i from 12 to length of str
if word i of str is in dayList then
set recDays to recDays & word i of str
else
exit repeat
end if
end repeat
return recDays
on error
return recDays
end try
end getDays

The new ribbon user interface in Win 8.1 should display appropriate buttons depending on the currently displayed folder within the explorer.exe window.

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

I have Firefox 13.0. I have the homepage with the icons such as history, but I do not have the updated tabs.How do I get the updated tabs? Thanks.

I have just updated to Firefox 13.0. I have the AVG Secure Search on my browser or whatever it is that is where the search engines and refresh, and bookmarks icons are located. Even though on my add ons page it says it is disabled. But obviously it isn't because it still works. I have removed AVG Secure Search from the list of search engines in the drop down list in the search bar, but this did not solve the problem with my tabs. The Firefox website says that my Firefox is up to date, but if it is up to date why do I still have the same old tab page when I open a new tab? When I click on the plus sign to get a new tab, it takes me to about:Tabs and says on the screen "You've opened a new tab." Then it has a search bar and a button next to it that says "Web Search!" Then it goes on to say "With Tabs You Can..." So, how do I change my current tabs to the updated Firefox tabs with icons of the my recent tabs and websites I regularly visit. Also can you please provide detailed step by step ways to solve this problem. Thanks.

You only see items on the about:newtab page if the history is enabled and the browsing cache is working (stores thumbnails).
*Tools > Options > Privacy > Firefox will: "Use custom settings for history"
*http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox
You can check the current cache usage on the about:cache page and in Tools > Options > Advanced > Network > Offline Storage.

Smartview 9.3.3 issue with Options Display tab Replacement NoData

I am testing an upgrade from 9.3.1 to 9.3.3. I have Office 2010 on a new WindowsXP laptop and using IE8.
What I have found with the Options menu on the Display tab that it will NOT let me put the value zero in the fields for Replacement #NoData or #NoAccess.
This is a huge problem for us as we use excel packs to upload our monthly reporting packs and have excel formula and HsGet formula built into the pack and when you refresh you get #Value error now instead of the no data fields populating with zero.
Has anyone else had this issue and can suggest a solution please.
Thanks
Lynda

Try #numericzero. I don't have an 9.3.x client handy but if my memory is correct this is what you need. Please note the memory is not as good as it used to be so don't be too mad at me if this is not it...

Af:panelTabbed get currently displayed tab

Similar Messages

Maybe you are looking for