Af:query re-execute SQL programatically

On a page I use the af:query which runs against a VO in the DB. The DB gets updated outside ADF BC, so the cache gets stale. Therefore, I would like to re-execute the query programmatically with the search parameters the user used on the last search.
I tried setting the Refresh-Attributes on the ImplicitViewCriteriaQuery or the Iterator. That does not help, since the documentation says a refresh won't necessary lead to executing the SQL. An explicit call to execute on the ViewIterator did not help either. Well, does the iterator know about the search criteria?
Actually I want to simulate a click on the search button before the page gets rendered. Any ideas?

Just clear the VO cache and refresh the UI panel by PPR. The VO will re-execute the last query automatically. Use this method:
vo.clearCache();

Similar Messages

Execute sql task not firing trigger.

Hi Everyone,
I am using insert and update quires in Execute SQL task i have a trigger at that table which will capture any changes.
When some changes are been made in management studio or front end portal the trigger is capturing but when changes are been made by the package through execute sql task it not capturing it.
Help would be greatly appericate it.
Thanking You,
Zoheb Syed.

Hi,
Really appericate your reply.
Can i ask one more question hor to use FIRE_TRIGGERS command for this query in execute sql task.
I have a trigger made in the table by name "trg_iud_Provider".
update dbo.Provider
set IDX_DN3_ID=D.ID_3,
FirstName=D.Lawson_Provider_First_Name,
LastName=D.Lawson_Provider_Last_Name,
FullName=D.PROVIDER_NAME,
Specialty=D.PSA_SPECIALTY,
Gender=D.Lawson_Gender,
LawsonEmailAddress=D.Lawson_E_Mail,
NPI_Number=D.NPI_NUMBER,
StateLicenseNumber=D.STATE_LICENSE_NUMBER,
provider_number=d.provider_number,
DepartName=d.DepartName,
App_User='System',
SysEffectiveDate=GETDATE()
from dbo.Provider A JOIN (select rid.ID_3,
rid.EMPLOYEE_NUMBER,
rLD.Lawson_Provider_First_Name,
RLD.Lawson_Provider_Last_Name,
RID.PROVIDER_NAME,
RID.PSA_SPECIALTY,
RLD.Lawson_Gender,
RLD.Lawson_E_Mail,
RID.NPI_NUMBER,
RID.STATE_LICENSE_NUMBER,
rid.provider_number,
rld.DepartName
from dbo.raw_IDX_Feed RID FULL OUTER JOIN dbo.raw_LawsonFeed RLD
ON RID.EMPLOYEE_NUMBER=RLD.Lawson_Employee_Number) D ON A.IDX_DN3_ID=D.ID_3
join ProviderContract pc on pc.ProviderID=a.ProviderID
WHERE (isnull(A.IDX_DN3_ID,9999)<>isnull(cast(D.ID_3 as int),9999)
OR isnull(A.FirstName,'xxxx')<>isnull(D.Lawson_Provider_First_Name,'xxxx')
OR isnull(A.LastName,'xxxx')<>isnull(D.Lawson_Provider_Last_Name,'xxxx')
OR isnull(A.FullName,'xxxx')<>isnull(D.PROVIDER_NAME,'xxxx')
OR isnull(A.Specialty,'xxxx')<>isnull(D.PSA_SPECIALTY,'xxxx')
OR isnull(A.Gender,'x')<>isnull(D.Lawson_Gender,'x')
OR isnull(A.LawsonEmailAddress,'xxxx')<>isnull(D.Lawson_E_Mail,'xxxx')
OR isnull(A.NPI_Number,'99999')<>isnull(D.NPI_NUMBER,'99999')
OR isnull(A.StateLicenseNumber,'xxxx')<>isnull(D.STATE_LICENSE_NUMBER,'xxxx')
or isnull(a.provider_number,'99999')<>isnull(d.provider_number,'99999'))
and pc.LawsonTermdate is null
and pc.FinanceTermdate is null

Execute SQL Task Error

I am using the following query in Execute SQL Task
SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '') WHEN 0 THEN (SELECT CONVERT(VARCHAR(8), GETDATE(), 112) AS [YYYYMMDD])
ELSE
(SELECT TOP 1 [BILLING DATE] FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '')
END
In parameter Mapping i have created two parameters and in result set i choose my variable.
Result set property is Single Row.
Following is the error message i received,
[Execute SQL Task] Error: Executing the query "SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETA..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems
with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Sarvan

I cant see where you've named resultset. try like below to make sure resultset has the name used in resultset tab
SELECT CASE(SELECT COUNT(*) FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '') WHEN 0 THEN (SELECT CONVERT(VARCHAR(8), GETDATE(), 112))
ELSE
(SELECT TOP 1 [BILLING DATE] FROM STG_APJ_APIW_DETAILS
WHERE source_filename = ?
AND lTRIM(RTRIM([BILLING DATE])) <> '')
END AS [Billing Date]
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Customized Execute SQL Task in SSIS

Hi,
I,m using Execute SQL Task in SSIS Package with these configuration ..
But, If SQL Statement doesn't report any record mean Query is not returning any data then this Task will be failed.
How can I assure that If there is no record is returning in query that " Execute SQL Task " should bot be executed .
Also I If I can do the same thing through other methods in SSIS, Pls response .
-Ashish

Hi Ashish,
The Execute SQL Task failed because you had set the ResultSet to “Single row”, however, the SQLStatement didn’t return any records. If you don’t want to execute this task when the query doesn’t return any records, you can use the following method:
Create a String type variable RowCnt, add another Execute SQL Task prior to this task.
In the new Execute SQL Task, input the SQLStatement as “Select Count(*) From Table”, set the ResultSet to “Single row”, and map the result set 0 to the variable RowCnt.
Join the two tasks (green line), and edit the Precedence Constraint (Green line), and set the expression to “(DT_I4)@[User::RowCnt]>0”.
Regards,
Mike Yin
TechNet Community Support

How Can I Execute Sql Query in Managed bean?

Hi,
I want to execute sql query in managedbean and get the query result. How can I do?
Best wishes!

You can do this by having current Database connection your application is using like this
public static synchronized DBTransaction getDBTransaction(){
FacesContext ctx = FacesContext.getCurrentInstance();
ValueBinding vb = ctx.getApplication().createValueBinding("#{data}");
BindingContext bc = (BindingContext)vb.getValue(ctx.getCurrentInstance());
DataControl dc = bc.findDataControl("AppModuleDataControl");
ApplicationModuleImpl am = ((ApplicationModuleImpl)(ApplicationModule)dc.getDataProvider());
return am.getDBTransaction();
and then user DBTransaction object to create Statement and PreparedStatement you can find those in java doc.

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

Execute SQL Task - FOR XML PATH query error

I have the following query
SELECT pl.Id,
pl.StartTime,
pl.EndTime,
pl.PackageName,
pl.Computer,
pl.Operator,
CASE WHEN (CHARINDEX('stack trace', pl.ErrorDescription) > 0) Then
   SUBSTRING(pl.ErrorDescription, 0, CHARINDEX('stack trace', pl.ErrorDescription))
   ELSE
   pl.ErrorDescription
   END as ErrorDescription
ISNULL(ErrorFile,'') as ErrorFile,
'Not Applicable' as SourceSystem
FROM etl.PackageLog as pl
WHERE pl.Processed = 0
ORDER BY pl.StartTime, pl.PackageName
FOR XML PATH('Row'), ROOT(N'FieldingCounts')
in a Execute SQL Task and i get the following error:
[Execute SQL Task] Error: Executing the query "SELECT pl.Id,
pl.StartTime,
pl.EndTime,
pl.Package..." failed with the following error: "An invalid character was found in text content.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The query execute without problem in database and in the ssis package doens't run because of the column
CASE WHEN (CHARINDEX('stack trace', pl.ErrorDescription) > 0) Then
   SUBSTRING(pl.ErrorDescription, 0, CHARINDEX('stack trace', pl.ErrorDescription))
   ELSE
   pl.ErrorDescription
   END as ErrorDescription
Any help to overcome the problem?
Thanks

Hi,
It looks like that you must be trying to set the result of the query to some variable from the Execute SQL Task. If yes, make sure that the target variable is of the correct data type where XML string can fit into. Considering that in SSIS, we have
some limit for XML strings.
Please let me know if it doesn't help.
Thanks,
Nimit

Execute SQL Task fails when specific column names are mentioned in Excel Query

Hi,
I have a requirement for extracting Excel data with thespecific column order. So instead of using the below query,
Select * From [Sheet1$A1:ZZ1]
I use the below one,
Select col1,
col2,
col91
From [CRM$A1:ZZ1]
So I have totally 91 columns.
I don't face any issues when i use the before query. i.e. direct select * from sheet1
But when i specify column names and do a select from the sheet it throws error as below,
[Execute SQL Task] Error: Executing the query "Select
[Col1]
From [Sheet1$..." failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly.
I just need to retrieve the column name alone and not any of the values to it. So when i do simple select * it gives the column names in the order of what it is been with the excel. But i do want it to be sorted in alphabetically and to retrieve the column
names.
I am not getting any proper solution for this for past 1 and a half days. May anyone of you please help me get it sorted? - Thank you!
--------------------------- Radhai Krish | Golden Age is no more far | --------------------------

Please use something like below:
SELECT F1 AS Col1, F2 AS Col2, F3 AS Col3, ...
FROM [Sheet1$A1:ZZ1]
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

Command the execute sql query and does not clean up data in Table

Hi Team
I have an SP, which writes source and target data to Temp Tables and runs except query to get mismatch details
I am using Exec command to execute source query that writes data to Temp Table, once I execute query using Exec, data is written and immediately #temp table is cleaned, now I cannot use #temp table for comparition.
Is there any way to execute sql query in SP without using EXEC and will hold the data in temp table.

You need to create temp table before EXEC statement and rewrite your dynamic query also as below
declare @source_Sql nvarchar(1000)
,@target_Sql nvarchar(1000)
create table #TempTable1 (name nvarchar(10))
create table #TempTable2 (name nvarchar(10))
set @source_Sql = 'INSERT INTO #TempTable1 SELECT [Name] from Employee'
set @target_Sql = 'INSERT INTO #TempTable2 SELECT [Name] from Employee2'
EXEC (@source_Sql)
EXEC (@target_Sql)
select * from #TempTable1
Except
select * from #TempTable2

Insert query using fn-bea:execute-sql() function

Hi ,
How to use sql insert query in Xquery function fn-bea:execute-sql().
Could you please anyone help me on this.
Regards
Rajesh.

Hi
Can i use stored procedure in that function to include insert query?
could you please suggest me on this.
Please provide some links or tutorial on that.
Regards
Rajesh

How to execute SQL Query in Code behind Using infopath 2010?

Hi,
I've repeatable on infopath form, and want bind it throuth code behind from SQL table. My question is that how to execute SQL Query in code behind from infopath as well as how would get Query result to bind repeatable control?
Thanks In Advance
Shoeb Ahmad

Hello,
You first need to add new SQL DB connection then you need execute connection from code behind.
See below link to create new connection
http://office.microsoft.com/en-in/infopath-help/add-a-data-connection-to-a-microsoft-sql-server-database-HP010092823.aspx:
http://www.bizsupportonline.net/infopath2010/connect-infopath-2010-sql-server-2008-table.htm
Then use below code to execute this connection:
AdoQueryConnection conn = (AdoQueryConnection)(this.DataConnections["Data connection name"]);
string origCommand = Select * from tablename;
conn.Command = origCommand;
conn.Execute();
Finally bind your table:
http://www.bizsupportonline.net/infopath2007/4-way-programmatically-add-row-repeating-table.htm
http://stevemannspath.blogspot.in/2010/09/infopath-20072010-populate-repeating.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Error in executing SQL query

Hi All,
I am working with labview application.
The database being used is Access.
The tables i have to use contains the special symbol - (not underscore.)
Let the table name be user-data
When i am executing the query select * from user-data its showing
error message syntax error in from clause.
I tried just typing the query in access also and got the same error.
I believe its because of the usage of the special character other than underscore in table name
Many applications using the same database is running in VB already.So there is no way for me to rename the table.
I know i am asking an invalid question.But still....
Is there any way for me to use the same table name and execute sql query.
Thanks in advance

There should be. Try putting the table name in quotes - some DBMS use single quotes, some use double quotes. For example say the table name has a space in it. Try something like:
select * from 'a funny table';
or
select * from "a funny table"; (Actually, I think I'd try this one first...)
Failing this, you have two choices: change the name of the table, or dump Access and go with a real DBMS - which you will probibly want to do anyway because it will only be a matter of time before you start hitting a performance wall. Access is particularly bad if you have more than one process making a connection to it at a time. Interms of alternatives, there are a couple really good open-source products out there, as well as no-cost versions of Oracle and SQL-Server.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Can't execute SQL Named query that uses connect by...

I'm having problems using the connect by with ReportQuery.setHierarchicalQueryClause (detailed in earlier post) so I defined a named query to execute the following sql;
select distinct(role_id)
from role_principal
connect by prior role_id = principal_id
start with principal_id = #principalId
When I run similar SQL in SqlPlus, i get results like this;
ROLE_ID
202
500
501
502
503
But when I run the query using Toplink like this;
Vector args = new Vector();
args.add(principal.getId());
roles = (Vector) session.executeQuery("orclGetRolesOfPrincipal", args);
I get this exception;
TopLink Warning]: 2005.10.05 10:58:14.362--ClientSession(18082301)--Thread(Thread[main,5,main])--Local Exception Stack:
Exception [TOPLINK-6044] (Oracle TopLink - 10g Developer Preview 3 (10.1.3.0 ) (Build 041116)): oracle.toplink.exceptions.QueryException
Exception Description: The primary key read from the row [DatabaseRecord(
     ROLE_PRINCIPAL.ROLE_ID => 202)] during the execution of the query was detected to be null. Primary keys must not contain null.
Query: ReadAllQuery(oracle.xdo.server.security.authorization.model.RolePrincipalRelation)
     at oracle.toplink.exceptions.QueryException.nullPrimaryKeyInBuildingObject(QueryException.java:662)
     at oracle.toplink.internal.descriptors.ObjectBuilder.buildObject(ObjectBuilder.java:349)
     at oracle.toplink.internal.descriptors.ObjectBuilder.buildObjectsInto(ObjectBuilder.java:633)
     at oracle.toplink.internal.queryframework.DatabaseQueryMechanism.buildObjectsFromRows(DatabaseQueryMechanism.java:141)
     at oracle.toplink.queryframework.ReadAllQuery.executeObjectLevelReadQuery(ReadAllQuery.java:440)
     at oracle.toplink.queryframework.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:727)
     at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:559)
     at oracle.toplink.queryframework.ReadAllQuery.execute(ReadAllQuery.java:408)
     at oracle.toplink.publicinterface.Session.internalExecuteQuery(Session.java:1977)
     at oracle.toplink.publicinterface.Session.executeQuery(Session.java:973)
     at oracle.toplink.publicinterface.Session.executeQuery(Session.java:945)
     at oracle.xdo.server.dataservices.impl.toplink.TLDataAccessManagerImpl.getObjects(TLDataAccessManagerImpl.java:346)
It seems to have a problem that there's not a parent record for role_id 202, which is a root level record and so should not have a parent.
I appreciate any help that can be provided.
Thanks,
-Tim Watson

Hello Tim,
Not sure of the problem in the first post, but in this one, you are executing the query as a ReadAllQuery. The results only contain the role_id, but TopLink expecting atleast all the primary key fields inorder to build the objects to return them to you. Try executing this SQL in a report query instead, or set the results to return all the fields so TopLink can build the objects.
Best Regards,
Chris

Sql query not executed using recordset

Hi All,
I am trying to first format and then execute SQL query statement using recordset object with DI API. the issue is with vb.net's string formatting. I want to use 'USE [DB_Name]' statement in SQL and then 'Alter Procedure ..' statement. as this has to be the first statement in sql , I am using 'GO' in between and seperating each sentence with following syntax.
Dim AltProc as string
AltProc = " USE [DB_name]" & Environment.NewLine
AltProc = AltProc & " GO " & Environment.NewLine
AltProc = AltProc & " ALTER proc [proc_name] " & Environment.NewLine
'---------------------and so on
Orec.DoQuery(AltProc)
this formatting does not recognize new line and gives 'incorrect syntax near 'Go'' error. strange thing is, if I take this query in SQL, it runs perfectly and I can see it getting formatted with each new line created. I tried even VbcrLf but it didnt work.
any one has any idea?
thanks in advance,
Binita

HI Binita
The reason:
GO is the "command" delimiter of MS Query Editor.
It is not working with RecordSet Object.
In MS SQL 2008 version you can define the schema before the procedure name but in SQL server 2000/2005 it is not possible.
IN SQL 2008 use the Fully Qualified name instead of GO:
Dim AltProc as string
AltProc = " ALTER proc [DB_name].[dbo].[proc_name] " + vbcrlf
'---------------------and so on
Orec.DoQuery(AltProc)
it is not working on MS SQL 2008 i have tried.
'CREATE/ALTER PROCEDURE' does not allow specifying the database name as a prefix to the object name.'
Regards,
J.
Edited by: Janos Nagy on Jun 22, 2009 2:55 PM

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

Af:query re-execute SQL programatically

Similar Messages

Maybe you are looking for