Affects when migrating from Office 2013 to Office 365

I currently have office 2013, with two email addresses being used in Outlook. I need to download Office 365 which I have already purchased. Will this have any affect on my two Outlook email addresses, and all the emails that are there?

Hi,
The activation and licensing are different between the Office 2013 and Office 365. We can't just
switch activated Office 2013 to Office 365. We can only uninstall Office 2013 and then install Office 365. In theory, we won't lose any emails in the email accounts configured in Office 2013. Just in case, we can back up your Outlook data files
of the two email accounts and then conduct the migration. To back up the data files, please refer:
http://support.microsoft.com/kb/287070/en-us
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Similar Messages

Migrate from Google Apps to Office 365 with admin credentials only

Hi team,
We are migrating from Google Apps to Office 365. I know the normal procedure of migrating, but I want to know how to migrate from gmail to office 365 with administrator credentials. Normally for migration, we use user's mail ID and password in CSV file.
But I don't want to use users credentials, instead I want to use only Administrator credentials.
Thanks in Advance...

A third party tool such as MigrationWiz can accomplish this task. More information on how to set up administrative access can be found here:
https://community.bittitan.com/kb/Pages/GoogleApps%20to%20Office365%20Migration%20Guide.aspx

Deploy Office 2013 - Uninstall Office 2010

Hello,
I am planing to deploy Office 2013 and created a MSP File (Setup /admin) for the silent Installation - everything works fine - except the uninstallation of Office 2010. In the OCT I´ve selected the Option to remove previous Versions of Office. I can
remeber that this works perfect in Office 2010 to remove Office 2007 too.
But in Office 2013 this doesn´t work anymore, the installed applications wizard (appwiz.cpl) Shows both Version of Office are installed. What is the best way to remove the old Version silently and install Office 2013? I would like to have all in one
"Application" deployed via SCCM 2012 SP1.

Have you looked at this document, or it's online equivalents:
http://blogs.msdn.com/b/mssmallbiz/archive/2012/10/22/free-microsoft-ebook-deployment-guide-for-microsoft-office-2013.aspx
In the section "Setup command-line options for Office 2013", they say:
/uninstall [ProductID]
Runs Setup to remove the specified product from the user’s
computer. Look up the value of [ProductID] in the Setup.xml
file for the product that you want to modify.
Example
\\server\share\Office15\setup.exe /uninstall ProPlus
where:
Office15 is the root of the network installation point.
ProPlus is the
[ProductID] ([ProductID]
is equal to the ID attribute of the
Setup element listed in
\\server\share\Office15\ProPlus.WW\setup.xml), where
ProPlus.WW is the location of the Office Professional Plus 2013 installation files.
You can customize the
/uninstall option by using it with
/config and a modified Config.xml file. This is necessary if you want to run a
“silent”
uninstall. In enterprise deployments, we recommend that you run a silent uninstall to prevent prompting users to enter information, and to prevent the installation from waiting for user interactions, even when files are being used.
To run a silent uninstall
Using a text editor, edit the following element attributes in the
\\server\share\Office15\ProPlus.WW\SilentUninstallConfig.xml file:
<Configuration Product="ProPlus">
<Display Level="none"
CompletionNotice="no" SuppressModal="yes"
AcceptEula="yes" /> </Configuration>
At the command line, use the following syntax:
\\server\share\Office15\setup.exe /uninstall ProPlus /config \\server\share\Office15\ProPlus.WW\SilentUninstallConfig.xml
Note:
In Office 2013, just as in Office 2010 and Office 2007, you cannot use the Setup.exe command line to set Windows Installer properties, such as
PIDKEY or DISPLAY. Setup does not pass these properties to Windows Installer. Instead, you make these customizations by using the Office Customization Tool or Config.xml. For a complete list of Setup properties, including blocked
and unsupported properties, see Setup properties in Office 2010.
The information also applies to Office 2013.
Office Customization Tool (OCT) in Office 2013
Config.xml file in Office 2013

HT4796 When migrating from a PC to my Mac user on the Mac.

When migrating from a PC to my Mac, the files get created under a new user on the Mac. How do I move the files to my user log on?

Check out the following KB Articles:
http://support.apple.com/kb/PH11393
OS X Mountain Lion: Transfer your information from a PC
http://support.apple.com/kb/HT1408
How to transfer data from a PC to a Mac

JMS issues when migration from weblogic 9.2 to 10.3.5

We are facing some issues when migration from weblogic 9.2 to 10.3.5
In weblogic 9.2 :_
BMP Entity EJBs used in our project are read-only in nature using entity cache, below is the configuration details
<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN" "http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd">
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>
Company
</ejb-name>
<entity-descriptor>
<pool>
<max-beans-in-free-pool>300</max-beans-in-free-pool>
<initial-beans-in-free-pool>150</initial-beans-in-free-pool>
</pool>
<entity-cache>
<max-beans-in-cache>3500</max-beans-in-cache>
<idle-timeout-seconds>100000</idle-timeout-seconds>
<read-timeout-seconds>0</read-timeout-seconds>
<concurrency-strategy>ReadOnly</concurrency-strategy>
</entity-cache>
Entity beans will get refreshed using the JMS messges. with in the MDB descriptor files(weblogic-ejb-jar.xml) we are using the provider URL directly and XA enabled connection factory is set to false.
migration to Weblogic 10.3.5_
With the same configurations MDB are not not getting deployed in weblogic 10 with some exception, so we removed the provider URL from weblogic-ejb-jar.xml and changed the JMS configuration to use foreign JMS and XA enable connection factory is set to true. Now when ever the JMS message is triggered Entity bean is not getting refreshed with the updated values. i.e values are stale.
Can some one look into this and provide your inputs to resolve this issue.

I think the Entity bean refresh problem appears to be unrelated to MDBs. The MDB is only responsible for getting the message to your application (which in turn interacts with Entity beans). You might want to try posting your question to an EJB newsgroup.
Tom

HT4413 When migrating from time machine to my new hard drive, only some files and applications and setting are transferred, not all of them. In my latest back up I have them all. How can I fix that?

When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.

sohs wrote:
When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.
If you want to use Time Machine to recover the contents of one of its a backups to a new drive, follow the instructions in Mac OS X 10.6: Recovering your entire system. Note that you must select the "Restore System From Backup" option from the Utilities menu of the Installer disc to do this.
Also note that if you are transferring files to a hard drive to be used with a different computer, you should use Migration Assistant instead. This intentionally will not copy everything because some settings, applications, etc. are not compatible computer-to-computer. Migration Assistant will copy everything that is.

HT201250 When migrating from time machine to my new hard drive, it migrates the first back-up I made several years ago. How can I migrate the latest back-up ?

When migrating from time machine to my new hard drive, it migrates the first back-up I made several years ago. How can I migrate the latest back-up ? I need time machine to migrate the latest back-up. Should I delete the older back-ups ?

As noondaywitch says, it should use the latest backup.
Where are your backups (external HD, Time Capsule, etc.)?
It sounds like there are two separate sets, and you're not connected to the right set.

HT4101 How is the photo size affected when importing from the SD card to ipad (2) ?

How is the photo size affected when importing from the SD card to ipad (2) ?
If they stay the same, any options I can have to "re-size" the photos so that I could use it for a photo storage when traveling?
Thanks.

To re-size, you can use:
https://itunes.apple.com/sg/app/simple-resize/id327776379?mt=8

When migrating from Bo6.5 to Bo4.0 what are the issues we will face?

Hi all,
When migrating from Bo6.5 to Bo4.0 what are the issues may come?
Thanks,
Hari.

Hi,
first of all you cant direnctly migrate from BO 6.5 to BI4. You have to migrate prior from BO 6.5 to XI 3.1 and afterwards to BI4.
This is a huge step cause BO 6.5 is a very legace version. You will face a lot of issues with the Security. You have to totally re- design it. You will also face issues with BCA Jobs. Also here you have to do a complete re- design. If you only use Full Client Reports you have to convert them to WebI in XI 3.1 prior to migrating them to BI4 cause with BI4 the support of DeskI has been stopped.
Maybe you consider to consult the SAP Consulting devision. This kind of Migration will be challenging.
Regards
-Seb.

Change GUIDs when migrating from SP 2010 to SP 2013?

When migrating custom list schema from SP 2010 to SP 2013, do I need to change the GUIDs for all the fields or can I use them as is?
Thank you!

Hi,
After migrating SharePoint 2010 to SharePoint 2013, all the GUIDs of the sites and lists would change.
If you just wanted to use the list in the site, it would have no impact on the lists, all the custom lists would work well.
However, if you have some functions or solutions based on the GUIDs of the lists, you should change all the GUIDs for all the solutions.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Migration from Windows Live to Office 2010-POP3 email accounts

So I was attempting to migrate a few emails, specfically old email messages from Windows Live to Office 2010. I could not migrate using the obvious tool since I'm not using Microsoft exchange. I used windows live exporting abilities, but it saves to the
desktop. Is there another way to export the data from Windows Live Mail to Office 2010.

You can export your Windows Live Mail to Outlook using manual methods which are properly described here
http://community.office365.com/en-us/f/158/t/212929.aspx
But if you want to export using third party tools then download an efficient eml to pst conversion tool from
http://www.windowslivemailtopst.emltopstconversion.org which instantly migrate your Windows Live Mail to Outlook.

Deploying Custom Office 2013, Uninstalling Office 2010

We've just recently moved to SCCM for application and OS deployment, so we're setting up applications to be deployed through SCCM for the very first time. I've read a few guides to deploying Office 2013, and the majority of them follow the same procedure:
Customize Office 2013 with OCT
Create an application in SCCM by selecting proplusww.msi
Edit the deployment type and replace proplusww.msi with setup.exe
Some guides reference the .msp in the setup.exe command, some don't. e.g. "setup.exe /adminfile custom.msp"
So, a few questions:
Why should I use setup.exe vs proplusww.msi? I understood that the application model gives us more control, better autodetection, and less manual configuration. i.e. use MSI for applications
If I should use setup.exe, do I really need to reference .msp? e.g. setup.exe /adminfile custom.msp I thought that when you customize the installer, and place the msp in the \updates folder, running the setup.exe still utilizes the msp file.
Some guides say I should also used an xml file for help with uninstalling Office 2013. e.g. An xml file with Display Level, SuppressModal, and AcceptEula set, then using the command "setup.exe /uninstall proplusr /config .\proplusr.ww\unisntall.xml".
What instances would I need the xml, and which instances would I not?
Finally, I would possibly like to install Office 2013 during OSD. Would that change any recommendations on how I create the Office 2013 SCCM application?
I'd appreciate any help/advice anyone can give. I was not able to find any info directly from Microsoft on how best to deploy Office with SCCM. Nor was I able to find any info on using proplusww.msi vs setup.exe for deployment. Thanks.

If you place the .MSP file in the Updates folder, the Setup.exe program will automatically process it without the need to specify in the command line. The .XML and OCT .MSP are two different means of customizing the installation. I typically
use the OCT to create the .MSP and drop it in the Updates folder, then just call setup.exe with no switches to perform the silent install.
Make sure you set the SETUP_REBOOT property to Never in the OCT, otherwise the install may perform an unexpected reboot that could potentially cause issues with ConfigMgr (especially if it's during imaging).
Thanks for the info. What about proplusww.msi vs using setup.exe? I still haven't been able to find any documentation on using one vs the other when deploying through SCCM (as to why you should use one over the other). Almost every SCCM application deployment
guide I come across always wants you to use the MSI, sometimes going to great lengths to find one, just to avoid using an exe. So, why does almost every SCCM Office deployment guide tell me to use setup.exe? Also, is it just me, or is there really not official
best practice form Microsoft when deploying Office through SCCM?

Losing out custom metadata info of few documents of a document librarby when migrated from MOSS 2007 to Sharepoint 2010

We have recently migrated from moss2007 to sharepoint 2010.We have a document library containing large no. of documents in it & for those documents there are some custom metadata columns apart from OOB library columns . We have user content DB attach
migration and after that we can see blank value under the custom columns for some records. However interesting point is we can see this metadata is showing for few documents.
Please suggest.

Hi,
What is your Office edition? When we create a managed metadata column in a Document Library, it will prompt that ‘Earlier versions of client programs might not support this type of column’. You should use Office 2010 to edit and create a document then save
to document library .
For detailed information ,please refer to this article:
http://rules.ssw.com.au/SoftwareDevelopment/RulesToBetterSharePoint/Pages/2010-Managed-Metadata-with-Office-2007.aspx
Beside, here are similar posts, you can use as a reference:
https://social.technet.microsoft.com/forums/sharepoint/en-US/1b115343-20e5-4962-af97-793194f07637/metadata-missing-when-revising-document
https://social.technet.microsoft.com/Forums/office/en-US/a65f9828-6e2f-4eb7-bde6-bd0600e3b1a2/migrating-documents-from-moss-2007-to-sharepoint-2010?forum=sharepointadminprevious
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Cannot Save Word files as a PDF in Office 2013 with Office customization tool

Hello
I'm deploying office 2013 as a part of a post clone task. Using the customization tool I created an msp with the full installation (without outlook,Link, or skydrive) I noticed that I cannot save or export files as PDF files. If I do a manual
install (without MSP) I can save files as pdf. I can't find anywhere in the customization tool that allows me to choose different "save as" file types. In office 2010 I used to be able to save word files as PDF files. Any ideas would
be greatly appreciated.
Charles

Hi,
In regarding the issue, could you give me more information? Did you test to install the Office 2013 by using MSP and manual installation in the same computer? Did the other Office suits can not save files as pdf?
Let's do some test to narrow down the issue:
If you use the only one computer to test, please export a new MSP file include all the suits and use the all the default setting. Then we follow the
link to deploy again.
If the issue still exists, please try to change a computer, and update Adobe programs to install the new MSP file to test.
If you get some error message when you save as pdf through Word, please upload, I'll do more deeply research.
Regards,
George Zhao
TechNet Community Support

Application has problems when migrated from 10g to 11g

Hi there,
I am hoping someone can shed some light on a problem I have in moving an application from Oracle 10g to Oracle 11g. The app works fine on 10g (uses Apache webserver with PL/SQL module, and APEX 3.1.2.00.2), but on 11g using the embedded web server and APEX 3.2.0.00.27, it doesnt. Most of the app works fine, but there are a couple of pages that provide the ability to add child rows to a parent/child relationship, where the parameter passing mechanism from one page to the next appears to suffer from some sort of corruption. I have traced this using the "session" and "debug" buttons on the developer interface, which show that the values of the parameters get changed inexplicably, when branching from one page to the next - even when the page is actually branching to itself.
I am using the "Set these items, "With these values" fields in the branch, and have verified that the correct values are being associated with the correct items in the application builder. But while this does work correctly under 10g, with 11g, the wrong values end up being passed. Just prior to the branch the set of parameters have the correct values, but immediately after the branch, one of the values is NULL, another has the value of a different item, and a third has a totally random value - I have no idea were it comes from!
I migrated the application from 10g to 11g using the APEX application developer's Export/Import options. There have been no other changes. Should this have worked? If so, any ideas what might have gone wrong?
Thanks,
Sid.

Well, I managed to solve this, but not in a way that makes much sense.
In desperation (I had tried almost everything else!) I changed the value of "Cached" in the page settings from "No" to "Yes", and ran the app, but the page didnt render correctly (in either Firefox or IE7) - in fact all that displayed was the developers toolbar at the bottom of the page. I changed the value of "Cached" back to "Y", ran the app again, and hey presto - everything worked fine! I actually did this a second time with a fresh import of the app from 10g, just to be sure I wasnt seeing things. I wasnt!
There was just one further issue - everything worked fine apart from this section of code in a page process:-
ELSIF (:p9_filter_type = 5) THEN
IF (:p9_x_gene_list IS NOT NULL) THEN
:p9_filter := :p9_x_gene_list;
END IF;
:p9_entity_types := 'GENE';
END IF;
In 11g the value of :p9_entity_types was not being set to 'GENE' when :p9_filter_type was 5. This was (and still is) working in 10g. I changed the code as follows:-
ELSIF (:p9_filter_type = 5) THEN
:p9_entity_types := 'GENE';
IF (:p9_x_gene_list IS NOT NULL) THEN
:p9_filter := :p9_x_gene_list;
END IF;
END IF;
... and now it works fine in 11g as well.
Only wish I knew why!

Affects when migrating from Office 2013 to Office 365

Similar Messages

Maybe you are looking for