Change GUIDs when migrating from SP 2010 to SP 2013?

When migrating custom list schema from SP 2010 to SP 2013, do I need to change the GUIDs for all the fields or can I use them as is?
Thank you!

Hi,
After migrating SharePoint 2010 to SharePoint 2013, all the GUIDs of the sites and lists would change.
If you just wanted to use the list in the site, it would have no impact on the lists, all the custom lists would work well.
However, if you have some functions or solutions based on the GUIDs of the lists, you should change all the GUIDs for all the solutions.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Similar Messages

  • After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed

    Hi All,
    After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
    Prasad kambar

    Hi  ,
    According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
    For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
     Firstly try running Test-SPContentDatabase on your source database for any issues -
    Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
    Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
    Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
    And please have a look at your custom solution on your site.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Planning a migration from Exchange 2010 to Exchange 2013

    Hello,
    I am planning a migration from Exchange 2010 to Exchange 2013 and I was wondering if there was a good guide on the UM migration. I haven't found one that isn't confusing as heck.

    Hello,
    Is there any update?
    If
    you have any feedback on our support, please click here
    Cara Chen
    TechNet Community Support

  • Migrating from SP 2010 to SP 2013

    I m new to sharepoint and our new project requirement is to migrate the contents from SP 2010 to SP 2013. we r not going to use any tools , so if we go manually what would be the approach to migrate the custom data to the next version. there is lot of custom
    data like features, event recievers, webparts that we have to take care of . do we have to code them again or what . 
    in depth reply or even some forums link will do . thanks

    Check out
    http://www.falconitservices.com/support/KB/Lists/Posts/Post.aspx?ID=124
    All customizations will have to be tested again  though, you can't expect them to work correctly. I would start by creating a list of customizations that have to be upgraded and still need to be supported
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • CHANGE DEFAULT OPEN APPLICATION FROM WORD 2010 TO WORD 2013

    Hi, 
    I have both Word 2010 and Word 2013 installed but when I open any documents in the client on SharePoint, it automatically opens in Word 2010 rather than 2013. How can I change this to open in the newest version of Word? 
    Thanks

    Technically, another forum :) Go to Control Panel -> Default Programs -> Set your Default Programs. Find Word 2013 in the list, and then select it as default.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • QuickEdit disabled after migration from SP 2010 to SP 2013

    Hi,
    I have a custom list. In SP 2010, I was able to use the Datasheet view to enter multiple data. I migrated the site to SP 2013, and the custom list, the Quick Edit is disabled.
    I recreated a Datasheet view, but still it is not showing.
    How to enable the Quick edit mode?
    Thanks

    Hi Venkatzeus,
    You may try below steps.
    Use or create a view that uses the Default view style for the list. To edit the selected view, follow these steps:
    On the affected list, click the LIBRARY tab on the ribbon, and then click Modify View.
    In the Style section of the Edit View page, click
    Default, and then click OK. 
    OR
    Go to the list settings> Advanced settings page
    Scroll down and Under quick edit options just choose "Yes" and then click OK.
    Let me know if it works for you.
    Regards,
    Amol

  • Trouble with publishing topology. Migration from Lync 2010 standard to 2013 standard.

    Hi,
    I have a problem with "Microsoft.Rtc.Applications.Testbot". When I publish the topology I receive an error,  I've found many solutions to my problem. One of the best descriptions 
    I've found here: http://lyncme.co.uk/microsoft-lync-server-2013/unable-to-publish-topology-a-trusted-server-with-the-type-mcxinternal-and-fully-qualified-domain-name-fqdn/
    I'm going to do the same method, but I do not understand whether I should remove both entries or only one. If I delete the record 2010, will the 2010 lync continue to work?

    Hi Alan,
    Lync is not that dependent on what is stored in Active Directory, and the topology builder should recreate any missing entries when it is rerun. I don’t think this operation is a high risk
    for the deployment as a whole, but do be careful when using ADSI edit, it’s all at your own risk.
    Here’s a similar case for your reference.
    https://social.technet.microsoft.com/Forums/lync/en-US/01404c0c-ba63-4471-a5b2-8e110be451e3/lync-server-2013-topology-builder-errors-global-activation-?forum=lyncdeploy
    Hope it can be helpful.
    Best regards,
    Eric

  • User migration from Lync 2010 to Lync 2013

    We have Lync 2013 pool co-existence with Lync 2010 pool. Need to move users based on their AD Group membership. In a particular AD group, only few of the users are enabled for LYNC 2010, not all users. How to get the list of only Lync enabled users in AD
    group and move them on to Lync 2013 by PowerShell script?
    Thanks in advance for your help
    Tek-Nerd

    When I ran the below command
    Get-ADGroupMember Mygroup | where {$_.msRTCSIP-UserEnabled -eq "true"}
    on my Lync 2013 server, got the below error message...
    At line:1 char:46
    + Get-ADGroupMember MyGroup | where {$_.msRTCSIP-UserEnabled -eq "true"}
    +                                             
    ~~~~~~~~~~~~
    Unexpected token '-UserEnabled' in expression or statement.
    At line:1 char:59
    + Get-ADGroupMember MyGroup | where {$_.msRTCSIP-UserEnabled -eq "true"}
    +                                                          
    ~~~
    Unexpected token '-eq' in expression or statement.
        + CategoryInfo          : ParserError: (:) [], ParentContainsErrorRecordExcep
        + FullyQualifiedErrorId : UnexpectedToken
    Tek-Nerd

  • Migrating From Exchange 2010

    I am in the process of migrating from Exchange 2010 to Exchange 2013.  I have all mailboxes migrated to Exchange 2013 and am ready to eliminate Exchange 2010 in its entirety, but I am unsure about public folders.  We have no public folders other
    than the default ones generated during the Exchange 2010 installation.  I can't find anything in any of the migration guides that explain what I need to do in this case.  Do I need to migrate anything, or can I just uninstall Exchange from the server
    and ignore the default public folders?

    Thanks.  We had one person using Outlook 2003 years ago, but that has since been replaced with Outlook 2010.  I was able to remove the "Calendar" folder that appeared in the Public Folder Manager (took me a while to see the "Delete"
    link) and was able to proceed.  It does not appear that I have caused any problems.

  • Application has problems when migrated from 10g to 11g

    Hi there,
    I am hoping someone can shed some light on a problem I have in moving an application from Oracle 10g to Oracle 11g. The app works fine on 10g (uses Apache webserver with PL/SQL module, and APEX 3.1.2.00.2), but on 11g using the embedded web server and APEX 3.2.0.00.27, it doesnt. Most of the app works fine, but there are a couple of pages that provide the ability to add child rows to a parent/child relationship, where the parameter passing mechanism from one page to the next appears to suffer from some sort of corruption. I have traced this using the "session" and "debug" buttons on the developer interface, which show that the values of the parameters get changed inexplicably, when branching from one page to the next - even when the page is actually branching to itself.
    I am using the "Set these items, "With these values" fields in the branch, and have verified that the correct values are being associated with the correct items in the application builder. But while this does work correctly under 10g, with 11g, the wrong values end up being passed. Just prior to the branch the set of parameters have the correct values, but immediately after the branch, one of the values is NULL, another has the value of a different item, and a third has a totally random value - I have no idea were it comes from!
    I migrated the application from 10g to 11g using the APEX application developer's Export/Import options. There have been no other changes. Should this have worked? If so, any ideas what might have gone wrong?
    Thanks,
    Sid.

    Well, I managed to solve this, but not in a way that makes much sense.
    In desperation (I had tried almost everything else!) I changed the value of "Cached" in the page settings from "No" to "Yes", and ran the app, but the page didnt render correctly (in either Firefox or IE7) - in fact all that displayed was the developers toolbar at the bottom of the page. I changed the value of "Cached" back to "Y", ran the app again, and hey presto - everything worked fine! I actually did this a second time with a fresh import of the app from 10g, just to be sure I wasnt seeing things. I wasnt!
    There was just one further issue - everything worked fine apart from this section of code in a page process:-
    ELSIF (:p9_filter_type = 5) THEN
    IF (:p9_x_gene_list IS NOT NULL) THEN
    :p9_filter := :p9_x_gene_list;
    END IF;
    :p9_entity_types := 'GENE';
    END IF;
    In 11g the value of :p9_entity_types was not being set to 'GENE' when :p9_filter_type was 5. This was (and still is) working in 10g. I changed the code as follows:-
    ELSIF (:p9_filter_type = 5) THEN
    :p9_entity_types := 'GENE';
    IF (:p9_x_gene_list IS NOT NULL) THEN
    :p9_filter := :p9_x_gene_list;
    END IF;
    END IF;
    ... and now it works fine in 11g as well.
    Only wish I knew why!

  • JMS issues when migration from weblogic 9.2 to 10.3.5

    We are facing some issues when migration from weblogic 9.2 to 10.3.5
    In  weblogic 9.2 :_
    BMP Entity EJBs used in our project are read-only in nature using entity cache, below is the configuration details
    <!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN" "http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd">
    <weblogic-ejb-jar>
    <weblogic-enterprise-bean>
    <ejb-name>
    Company
    </ejb-name>
    <entity-descriptor>
    <pool>
    <max-beans-in-free-pool>300</max-beans-in-free-pool>
    <initial-beans-in-free-pool>150</initial-beans-in-free-pool>
    </pool>
    <entity-cache>
    <max-beans-in-cache>3500</max-beans-in-cache>
    <idle-timeout-seconds>100000</idle-timeout-seconds>
    <read-timeout-seconds>0</read-timeout-seconds>
    <concurrency-strategy>ReadOnly</concurrency-strategy>
    </entity-cache>
    Entity beans will get refreshed using the JMS messges. with in the MDB descriptor files(weblogic-ejb-jar.xml) we are using the provider URL directly and XA enabled connection factory is set to false.
    migration to Weblogic 10.3.5_
    With the same configurations MDB are not not getting deployed in weblogic 10 with some exception, so we removed the provider URL from weblogic-ejb-jar.xml and changed the JMS configuration to use foreign JMS and XA enable connection factory is set to true. Now when ever the JMS message is triggered Entity bean is not getting refreshed with the updated values. i.e values are stale.
    Can some one look into this and provide your inputs to resolve this issue.

    I think the Entity bean refresh problem appears to be unrelated to MDBs. The MDB is only responsible for getting the message to your application (which in turn interacts with Entity beans). You might want to try posting your question to an EJB newsgroup.
    Tom

  • OWA still lands at Exchange 2010 for users migrated from Exchange 2010 to 2013

    I never had any issues with OWA redirection for a few users that I migrated from Exchange 2010-2013 initially. For users that I am migrating in the past few days, the OWA 2013 is landing on Exchange 2010 despite the mailbox being successfully migrated to
    Exchange 2013.
    Troubleshooting:
    1. I have restarted the IIS Services
    2. I have restarted MSExchangeOWAAppPool.
    3. I have also checked the homeMDB attribute of the 2013 migrated user with the Exchange 2013 database.
    I would really appreciate if anyone could share their experiences on similar issues.

    I have checked it, the migration status is completed. In regard to the namespaces, both CAS 2010 and 2013 are set to mail.domain.com; CAS 2013 is the internet facing. I have also checked the internal access for OWA, it's the same scenario. Migrating them
    back to 2010 and 2013 won't resolve the issue in my case, because the issue persists for every new user that I am migrating.
    I recently found the following when I login with a user who is not effected and then logout:
    1. Login in back with the affected user without closing the browser or clearing the cache, it lands at CAS 2013 OWA.
    2. However, I get the below listed error message when I logout. 
    Your request couldn't be completed.
    Click here to continue working.
    This may have occurred for security reasons or because your session timed out.

  • Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

    Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files. 

    Hi,
    Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
    Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
    Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
    If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
    a. OAB generation in Mailbox:
    \\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
    b. OAB distribution in Client Access:
    \\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Renaming TFS Server name upon migration from TFS 2010 to TFS 2012

    We are migrating from TFS 2010 on existing server to TFS 2012 on new server. All components (TFS 2012, SQL 2012, SPS 2010) are directly on the new server similar to existing server (TFS 2010, SQL 2008 R2, WSS 3.0).
    The new server has a new name, however the service provider that does the actual migration,
    wants to rename
    the new server to be same name as the name of the original existing server when it is shutdown. The rename is intended to be done using
    netdom utility.
    I noticed there are articles by microsoft and others that describe various issues that may arrise as
    result of TFS server rename. However service provider still plans to rename based on his field experience and best practices.
    What do u recommend to do in this aspect ? Why would it be necessary to rename and not use the new name (DNS can map old name as well to the new IP) ? What are the actual risks in such rename and is it worth it ?
    Thank u

    Hi Cathy,
    Thank u for your reply.
    We know that renaming the new server to the same name as the original one, is
    not a must for the migration to work. The issue in question is as follows :
    1. A Microsoft partner that has hands on experience in TFS migration, and planned to migrate for us, recommends to rename the new server name, to the original server name, utilizing net_dom command, and to do it during / after  same procedure u
    provided link to.
    2. We found Microsoft documentation that cautions about renaming the server, e.g. renaming SQL server which is in our case on same machine where TFS 2012 is to be installed. However, the partner urges us to rename, explaining that net_dom should perform
    the rename safely without caution risk.
    Kindly let u sknow if Micorsoft considers such rename with net_dom to be a good
    practice in low risk for such migration,
    or better keep the new server name as it is and just map the old server name in DNS to the IP of the new server.
    Thank u.

  • Can't change quantity when copy from Sale order for Delivery

    Hi all!
    Can i use authorization for can't change quantity when copy from Sale order for Delivery.

    Tien,
    Approval will not work when you have mutiple rows of data.  You would have to work with SP Transaction Notification
    There has been threads before on the forum on the same topics.
    Block the Quantity in Sales Delivery
    Approval Procedure for chaning quantity in Delivery Document
    Suda

Maybe you are looking for