After 0DAT was created, current calendar day window comes up

Dear all
After i created 0DAT variable, i tried to create query with BX analyzer.
My query looks like this http://static.flickr.com/35/71753944_f360714bbd_o.jpg .
i got the following window.
http://static.flickr.com/35/71753945_f86ed8219f_o.jpg
and then i clicked "Execute" icon.
The result is "No Applicable Data Found.".
"components 0DAT (version A) do not exist on the database"
Refer to Component 0DAT (version A) does not exist in the database
thanks in advance.
David (-)

After i deleted the old InfoCube requests that failed.
I refered to this
BEX Analyser: No Applicable Data Found
If there is any "red" symbol, it will cause "No Applicable Data Found"
Have a look.
http://static.flickr.com/35/71761783_ff4bd754f3_o.jpg
Anyway , thanks Paolo.
David (.)

Similar Messages

Current Calendar Day on Selection Screen as Default

Hi,
I have a situation where i need to have a variable which pulls up current calender day as a default value in the selection screen.
Here users can use the default value if they want or else they should be able to change the default value to their requirent date.
I have gone thorugh number of posts in this forum , but non solved my problem . that is the reason i am posting new thread. Please suggest.
Thanks,
Kumar

Hi Kumar,
You can use the SAP standard 0DAT ,this will display the current calendar day.
Or
We can write it in CMOD
Create A variable by name Y_SDATE in the QD and in CMOD u can write this piece of Code.
WHEN 'Y_SDATE'.
        SY_DATE = SY-DATUM .
        IF I_STEP = 1.
        L_S_RANGE-LOW = SY_DATE .
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
Hope this helps
Rgds
SVV123

How to get highest number of open cursors within the current calendar day

Hi all ,
i need to know how to get the highest number of open cursors within the current calendar day.
Thanks ,

823030 wrote:
the issue is my customer is getting the error ORA-01000: maximum open cursors exceeded and we need an sql statment that gets the following values :
-highest number of open cursors experienced in the current calendar day.
-current open cursors
-and maximum open cursorsThis error is rare. It happens when
a) the value of the open cursor parameter is set extremly low (default is something like 1000). Low would be something like 10.
b) <strike>you have many concurrent users(=sessions) and </strike>the application does not use bind values
In this case each select will open a new cursor, instead of reusing it.
c) you have a select that opens a cursor for each line. This can happen with a statement where you have the CURSOR keyword somewhere in the select or where clause. Those cursors will be closed when the select is finished. But during the run time of the select, all cursors stay open.
To track the number of "open cursors" during the day you would need to implement some monitoring. Maybe based on the view that was already mentioned.
Edited by: Sven W. on May 16, 2011 2:30 PM - since the parameter is on session level, other open cursors should not influence it much.

"Current Calendar Month" vs. "Current Calendar Day (SAP Exit)-1" why this?

Hi,
we are looking at a situation regarding Yerterday's data against MTD for the same restricted key figure. The believe is that MTD(Jan 10) less MTD(Jan 9) should be equal to Yesterday(Jan 9) i.e. yesterday's data, assuming today is Djan 10 2007.
Unfortunately it is not happeing like that. Any ideas as to what may be going on?
"Yesterday" is the key figure is restricted by
"Calendar day" restricted on "Current Calendar Day (SAP Exit)-1"
"MTD" is restricted on
"Cal. Year/Month 0CALMONTH" restricted on "Current Calendar Month 0CMONTH"
Shouldn't the Yesterday and the difference between MTD as described above be the same?
If not, how should the time char be handled to get what I am looking for?
Thanks

HI,
thanks for the example ... let me correct what you did not get:
Using your exmple,
MTD(Jan 10) = 1500
MTD(Jan 9) = 1400
Therefore, MTD(Jan 10) - MTD(Jan 9) = 1500 -1400 =100
But on Jan 10, when I say Yesterday, I am referring to Jan 9 = 600
Why is Yesterday, calculated based on the cummulative difference of the two MTDs not equal to the raw Yesterday?
This is where the confusion is. Somebody got the report for MTD(Jan 9) and noted the number down. Then on the next day got the report for MTD(Jan 10) and noted the numberber down. When she takes the diffference and get 600, she expects that when she compares it to the Yesterday's data she gets the same numbers. Why is it that also in your example it does not happen that way.
Thanks

IPod 5th Gen doesn't find any WiFi signals after battery was dead for two days.

I recently bought an ipod 5th generation, it only has the selfie camera (no back camera).
My battery then ran out, and my iPod was dead for two days.
My iPod charging cable wasn't working, so i went out to buy a new one.
After charging it with the new cable, it would not connect to the internet.
My brother has a 4th generation ipod and his picks up and connects to the wifi signal we have here at home, but mine won't even pick up the signal, or any wifi signals period.
I looked around here on the Apple Support but found nothing that helped, I already reset my network settings.
Is there any way to fix this?

If not this
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

After Effects error:creating resource file on Windows

Hi
I have a problem with a set of plugins we are developing. We have about 20 different plugins. But after I apply the 10th plugin, it gives the following error on Windows only (CS6):
After Effects error:creating resource file "....aex" ( 3 :: 0 )
I can have as many instances of the same plugin but once I have a total of 10 different then this error always comes up
One thing that is being enabled in the plugin is this flag:
PF_OutFlag_KEEP_RESOURCE_OPEN
Is this the culprit?
Thanks in advance
DonJ

I still think it is a permissions/ user privileges/ policies/ security issue - if it runs on one account, it is unlikely the plug-in is damaged or you installed the 32bit version in CS5 or vice versa. I strongly suspect the plug-in is unable to probe your graphics card and thus never initializes. Perhaps it's being blocked by some security tool or your user account doesn't have the permissions to load system drivers. The latter can be fixed by changing the respective entry in your group policy editor (gpedit.msc). The respective point would be in Computerkonfiguration --> Windows-Einstellungen --> Sicherheitseinstellungen --> Lokale Richtlinien --> Zuweisen von Benutzerrechetn --> Laden und Entfernen von Gerätetreibern. And of course temporarily turn off security stuff to verify it's not the problem.
Mylenium

How to 'force in' the Depreciation Area for an Asset after it was created

Hi,
When I created an new asset under a new asset class, I forgot to set-up the depreciation area for that class. Now after I have saved/created the asset, I get this error : No depreciation areas have been defined for asset 1012500000-0. How do I 'force-in' the depreciation area now after it has been setup.

try and read docu to tcode AFBN
(if your problem is in production, consult SAP-OSS)
A.

How to create delivery order after SO was created and before in storage ?

HI ALL:
The title is my question ? Is there any one know how to set ?
please, thanks first.

Hi ,
I faced the same problem once..
Msgno: VL367 - An item with no delivery quantity is not permitted. Item will be deleted.
You can solve it by doing either of the following..
1.Enter storage location for the item in Sale Order where you have stock..
or
2.find the storage location assigned in OVL3(Picking Location Determination). In case if Storage location has assigned, but stock is not maintained in storage location - then we will get this error.
Try to change the storage location in this or in the sale order..
I would suggest u to add stock for that particular storage location..
Thanks,
Venkatesh.S.P

How to delete a folder in windows , which i was created through SAP

Hi ,
First I was created one folder in windows and through SAP application I downloaded some file into that. After closing all programs(Even SAP LOG off ) also. Now i want to delete that folder.
While deleting it showing error as some other program file or close that program.
That file only possible to delete throgh again F$_FileName FM.
plz give solution to delete that file from windows itself.

hi,
Try to restart your pc then delete the file you want to delete.
I hope it helps.

Can't get Palm Desktop app to react after syncing with Yahoo mail calendar info

Attempted to move calendar from Yahoo mail page to Palm Desktop in my Macbook--
Yahoo page says "don't use Intellisync" --thre is a new program called Autosync--but it turns out it doesn't work for Macs --clearly, many instructions on Yahoo paged do not apply to Macs--
find this is a common problem on many sites--assumption that all are PC folks.
Imagine how things will go if Microsoft actually buys Yahoo!
Anyway--Created Calendar as a CV file and imported to Palm Desktop--
now cannot get program to run correctly--it appears all of the calendar info was imported to calendar day on which I imported it--so there is a huge amount of info being processed whenever I attempt to interact with the app.--the dreaded beachball appears and spins endlessly--
Have re-installed Palm app. (4.2.1) but problem seems to be imbedded, and re-occurs.
Is there any solution except to dump the entire app. from my hard drive, lose my archive et. al.
and re-synch from my Tungsten E2???
Post relates to: Tungsten E2

Did away with it in 10.8. Sync via application Notes now.

Create a Calendar item from sms

Hi,
there is a way to create a calendar event from a "link" in a sms?
Example SMS:
"Hello, your appointment is for 02/02/2013 at 10:15"
I would like that when i receive the sms on my iphone, was created a calendar event for the specified time, or when i clicks on "02/02,,,", create the event.
is it possible?
i can change the format of sms for do this.
thank you,
regard
Daniele

Hi Matt,
According to your description, my understanding is that you want to add a Start Date to the task created by SharePoint 2013 workflow on list A.
For List B(the task list), you can create a new workflow, and add "Set Field in Current Item" to set the Start Date, like the screenshot below. Then you can set the workflow start automatically when an item is created.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Can order type be changed once it was created?

Hi,
Is there any possible way to change the production order type after it was created?
Thanks!
Wesley

Wesley,
Since it is a custom order type it all depends on its configuration. Probably you need to check from the settlement side as what would be effect. If both the order types are settling to MAT(Material) then I dont see an Issues of wrong order type, the other thing may be interms of any custom reporting taken based on order type.
If you still feel that this needs to be sorted out. You can reverse the confirmation and Goods movment from the wrong order(Order type) and then set deletion flag to it, then create a new order with correct order type and perform Confirmation and Goods movement.
Regards,
Prasobh

In Bex Formula variabel, Current calander day(sap exit) missing

Hi All,
In Bex Query Desinger, there is a defualt SAP Exit formula variabel - "current calander day", we can use this.
I am unable to see this formula variabel in my formula variabel list.
How to get this standard sap formula variabel - "current calander date" in formula variabel, is any setting required to do?
Dushyant.
Edited by: DUSHYANT DADHANIYA on Aug 24, 2010 5:27 PM

Hi Ravikanth Indurthi ,
i found 0f_aday - fomula var for current calendar day, this is only working at formula variabel in beq query designer.
is there any formula variable for counting number of days, ex today is 13 sep 2010 than i want result 12 using formula variabel.
is there any formula variable to get last date of previous month?
Regards,
Dushayant.

How do I get spell check back on after firefox was updated? Thanks

How do I get spell check back on after Firefox was updated?

Not all locales come with a dictionary installed due to licensing reasons.<br />
If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions) and selected.
You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.<br />
You can open the "Add Dictionaries" link to install a dictionary if you do not have one.<br />
Make sure that [X] "Check Spelling" in the right-click context menu has a tick.<br />
You can enable or disable spell checking globally:
* Tools > Options > Advanced : General: Browsing: "Check my spelling as I type"
See also:
* https://support.mozilla.com/kb/Using+the+spell+checker
You can look here for dictionaries:
* https://addons.mozilla.org/firefox/language-tools/

After downloading update iTunes will not open, message says "The file "iTunes Libary.itl" cannot be read because it was created by a newer version of iTunes." I have windows 7..

I downloaded update for iTunes when the computer restarted it said I had perform a system restore. After restore a message says " The file "iTunes Libary.itl" cannot be read because it was created by a newer version of iTunes. She I remove iTunes and reinstall it? Or can I perform the update from online? Thank you for your help!!

See Empty/corrupt iTunes library after upgrade/crash. This message may sometimes be caused by a corrupt library database rather than an outdated version of iTunes.
tt2

After 0DAT was created, current calendar day window comes up

Similar Messages

Maybe you are looking for