After 11.1.1.7 Upgrade, Default Values are Screwed Up
I upgraded ODI from 11.1.1.3 to 11.1.1.7. While testing the upgrade, i noticed the following:
When creating a new schema under a physical architecture, the default work table prefixes are all blank.
When I reverse engineer a table in Oracle that contains a column of type "Number" with no length or scale defined, ODI defaults these values to 0, and -127 respectively.
How do I change these defaults? Anyone else experiencing this?
What steps you followed to upgrade?
Was the upgrade complete successful? or something was skipped?
Regards,
Santy.
Similar Messages
-
It looks like whenever one specifies Column default values at a library level then the content organizer routing goes a bit awry SPECIFICALLY FOR NON OFFICE FILES [e.g. PDF] . Below are the observations and issues
1. Column level default value set on a record library with auto declaration of records turned on. The content organizer routes the document to the library but also keeps a copy of the document in the drop off library. It does not remove it from the drop
off library. The instant we clear the default value settings at the library level of the target library the content organizer works as expected again.
2. If default value settings are specified on a column in the target library then the PDF file gets routed to the document library but all the metadata is blanked out. The copy of the file that remains in the drop off library has all the correct metadata but
the target library has blanked out metadata.
Are the 2 observations described above by design or are they bugs? If so is there any documentation that is available that proves this because this does not make logical sense and proving this to a client in the absence of any documentation is a challenge.
The problem goes away if we shift the default value to the site columns directly at the site collection level. It's just the library level defaults that the pdf files do not seem to agree withHi Lisa,
Thanks for responding. This can be replicated in any environment but is only replicable for a specific combination of content organizer settings . The combination of settings I am referring to can be seen in the screenshot below. If you turn off redirect
users to the drop off library for direct uploads to libraries and if you turn on sharepoint versioning then you should be able to replicate the issue. Also we are using managed metadata site columns. I simplified this use case to a custom content content type
with just 2 custom managed metadata columns and can still replicate the issue in several environments. Also note the issue does not occur if the default values are set at the site or site collection level. It only occurs if you set the column value default
at a library level. I was able to replicate this on a completely vanilla Enterprise records site collection freshly created just to test this. Also note that the issue is not that the file does not reach the destination library. The issue is the
document does not get removed from the drop off library after it is transfered to the destination library which technically should have gotten removed. -
After Safari 7.0.4 upgrade http pages are blank
After updating to Safari 7.0.4 I am having the following issue, http Safari pages are compately blank, if I try to open an https page and manually add the prefix https:// to the address, then they will load. This does not work with http.
The BBC News website will not load at all and I get a blank page.
I am also having problems with Chrome and Firefox where I get the error 'no data recieved'
I've tried deleteing cache in Develop, 'Remove all website data', turning off Extensions etc. The only way that I have got this to works is by rebooting and starting in 'Safe' mode which is the only way I can view this site after searching from Google.
Can anyone help please? This is really frustrating and there doesn't seem to be a solution anywhere on the Web.Hi Linc, I have also run the diagnostic that I have seen you ask other users in this discussion in anticipation of you asking, I hope it helps:-
Model Identifier: MacBookAir3,2
System Version: OS X 10.9.3 (13D65)
Kernel Version: Darwin 13.2.0
Boot Mode: Normal
Time since boot: 18:50
FileVault: FileVault master keychain appears to be installed
Diagnostic reports
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 LANrevTMHelper crash
2014-06-01 QuickLookSatellite crash
2014-06-01 QuickLookSatellite crash
2014-06-01 QuickLookSatellite crash
2014-06-01 QuickLookSatellite crash
2014-06-01 mds crash
2014-06-01 mds crash
Log
May 31 20:50:23 New Power Throttle state:1 Old state:0
May 31 20:51:15 New Power Throttle state:0 Old state:1
May 31 20:52:34 TMCCFS 138 ERROR ioctlMod proc_find error. comm_pid[350] fd[0]
Jun 1 01:47:51 TMCCFS 161 MSG ioctlMod debug level: 0, timeoutAction: -13, queueFullAction: -13, maxRetryInWait: 300, queue length: 1000
Jun 1 03:20:38 New Power Throttle state:1 Old state:0
Jun 1 03:21:11 New Power Throttle state:0 Old state:1
Jun 1 04:21:25 New Power Throttle state:1 Old state:0
Jun 1 04:21:55 New Power Throttle state:0 Old state:1
Jun 1 05:22:11 New Power Throttle state:1 Old state:0
Jun 1 05:22:41 New Power Throttle state:0 Old state:1
Jun 1 06:22:57 New Power Throttle state:1 Old state:0
Jun 1 06:23:20 New Power Throttle state:0 Old state:1
Jun 1 07:23:42 New Power Throttle state:1 Old state:0
Jun 1 07:24:09 New Power Throttle state:0 Old state:1
Jun 1 08:24:28 New Power Throttle state:1 Old state:0
Jun 1 08:25:03 New Power Throttle state:0 Old state:1
Jun 1 09:25:14 New Power Throttle state:1 Old state:0
Jun 1 09:25:40 New Power Throttle state:0 Old state:1
Jun 1 10:53:01 wl0: Roamed or switched channel, reason #8, bssid 74
Jun 1 10:58:12 ALF: ifnet_get_address_list_family error 12
Jun 1 11:03:53 wl0: Beacon Loss Event
Jun 1 17:05:57 New Power Throttle state:1 Old state:0
Jun 1 17:05:57 New Power Throttle state:0 Old state:1
Jun 1 18:21:04 New Power Throttle state:1 Old state:0
Jun 1 20:25:59 New Power Throttle state:0 Old state:1
Swap (MiB): 3791
Activity
CPU: user 11%, system 7%
kexts
com.squirrels.driver.AirParrotSpeakers (1.8)
com.squirrels.airparrot.framebuffer (3)
com.sophos.nke.swi (9.0.53)
com.sophos.kext.sav (9.0.61)
com.trendmicro.kext.filehook (1.5.0)
com.trendmicro.kext.KERedirect (1.0.0)
Daemons
com.sophos.scan
com.sophos.intercheck
org.macosforge.xquartz.privileged_startx
com.sophos.webd
com.sophos.sxld
com.sophos.notification
com.sophos.configuration
com.sophos.autoupdate
com.poleposition-sw.LANrevAgent
com.microsoft.office.licensing.helper
com.meraki.agentd
com.dymo.pnpd
com.crashplan.engine
com.barebones.textwrangler
com.barebones.authd
com.adobe.fpsaud
Agents
com.paragon.ntfs.upd
com.paragon.ntfs.trial
org.macosforge.xquartz.startx
com.sophos.uiserver
com.poleposition-sw.lanrevagent.uiagent
com.poleposition-sw.lanrev_agent.urlhandler
com.nike.nikeplusconnect
com.hp.devicemonitor
com.microsoft.SyncServicesAgent
com.google.keystone.user.agent
com.adobe.ARM.UUID
launchd
/System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist
(com.apple.AirPortBaseStationAgent)
/System/Library/LaunchAgents/com.paragon.NTFS.trial.plist
(com.paragon.ntfs.trial)
/System/Library/LaunchAgents/com.paragon.NTFS.upd.plist
(com.paragon.ntfs.upd)
/Library/LaunchAgents/com.hp.devicemonitor.plist
(com.hp.devicemonitor)
/Library/LaunchAgents/com.nike.nikeplusconnect.plist
(com.nike.nikeplusconnect)
/Library/LaunchAgents/com.poleposition-sw.LANrevAgentURLHandler.plist
(com.poleposition-sw.lanrev_agent.urlhandler)
/Library/LaunchAgents/com.poleposition-sw.LANrevUIAgent.plist
(com.poleposition-sw.lanrevagent.uiagent)
/Library/LaunchAgents/com.sophos.uiserver.plist
(com.sophos.uiserver)
/Library/LaunchAgents/de.novamedia.VodafoneDeviceObserver.plist
(de.novamedia.VodafoneDeviceObserver)
/Library/LaunchAgents/org.macosforge.xquartz.startx.plist
(org.macosforge.xquartz.startx)
/Library/LaunchDaemons/com.adobe.fpsaud.plist
(com.adobe.fpsaud)
/Library/LaunchDaemons/com.barebones.authd.plist
(com.barebones.authd)
/Library/LaunchDaemons/com.barebones.textwrangler.plist
(com.barebones.textwrangler)
/Library/LaunchDaemons/com.crashplan.engine.plist
(com.crashplan.engine)
/Library/LaunchDaemons/com.dymo.pnpd.plist
(N/A)
/Library/LaunchDaemons/com.meraki.agentd.plist
(com.meraki.agentd)
/Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
(com.microsoft.office.licensing.helper)
/Library/LaunchDaemons/com.poleposition-sw.LANrevAgent.plist
(com.poleposition-sw.LANrevAgent)
/Library/LaunchDaemons/com.sophos.autoupdate.plist
(com.sophos.autoupdate)
/Library/LaunchDaemons/com.sophos.configuration.plist
(com.sophos.configuration)
/Library/LaunchDaemons/com.sophos.intercheck.plist
(com.sophos.intercheck)
/Library/LaunchDaemons/com.sophos.notification.plist
(com.sophos.notification)
/Library/LaunchDaemons/com.sophos.scan.plist
(com.sophos.scan)
/Library/LaunchDaemons/com.sophos.sxld.plist
(com.sophos.sxld)
/Library/LaunchDaemons/com.sophos.webd.plist
(com.sophos.webd)
/Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist
(org.macosforge.xquartz.privileged_startx)
Library/LaunchAgents/com.adobe.ARM.UUID.plist
(com.adobe.ARM.UUID)
Library/LaunchAgents/com.google.keystone.agent.plist
(com.google.keystone.user.agent)
Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist
(com.microsoft.SyncServicesAgent)
Startup items
/Library/StartupItems/HW_CreateNetwork/CreateNetwork
/Library/StartupItems/HW_CreateNetwork/HW_CreateNetwork
/Library/StartupItems/HW_CreateNetwork/StartupParameters.plist
/Library/StartupItems/HWPortDetect_driver/HWPortCfg_driver
/Library/StartupItems/HWPortDetect_driver/HWPortDetect_driver
/Library/StartupItems/HWPortDetect_driver/StartupParameters.plist
/Library/StartupItems/iCoreService/iCoreService
/Library/StartupItems/iCoreService/StartupParameters.plist
Bundles
/System/Library/Extensions/AirParrotDriver.kext
(com.squirrels.driver.AirParrotSpeakers)
/System/Library/Extensions/APExtFramebuffer.kext
(com.squirrels.airparrot.framebuffer)
/System/Library/Extensions/cdc.kext
(com.zte.driver.cdc_usb_bus)
/System/Library/Extensions/cdc_ecm_qmi.kext
(com.zte.driver.cdc_ecm_qmi)
/System/Library/Extensions/DymoUsbPrinterClassDriver.kext
(com.dymo.usbprinterclassdriver.kext)
/System/Library/Extensions/HuaweiDataCardDriver.kext
(com.huawei.driver.HuaweiDataCardDriver)
/System/Library/Extensions/IceraUSBMassStorageBypass.kext
(com.novamedia.driver.IceraUSB_MSD_Bypass)
/System/Library/Extensions/NikeSportWatch.kext
(com.nike.sportwatch)
/System/Library/Extensions/NMHuaweiPhonesVTPCDC_106.kext
(de.novamedia.oem.vodafone.vtp.huawei.cdc)
/System/Library/Extensions/NMSamsungDriver_106.kext
(de.novamedia.driver.NMSamsung)
/System/Library/Extensions/NMSmartplugSCSIDevice_106.kext
(de.novamedia.driver.NMSmartplugSCSIDevice)
/System/Library/Extensions/NovatelWireless3G.kext
(com.novatelwireless.driver.3G)
/System/Library/Extensions/NovatelWirelessFilter.kext
(com.novatelwireless.driver.DisableAutoInstall)
/System/Library/Extensions/NovatelWirelessUSBCDCECMControl.kext
(com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl)
/System/Library/Extensions/NovatelWirelessUSBCDCECMData.kext
(com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData)
/System/Library/Extensions/Option72.kext
(com.option.driver.Option72)
/System/Library/Extensions/OptionHS.kext
(com.option.driver.OptionHS)
/System/Library/Extensions/OptionMSD.kext
(com.option.driver.OptionMSD)
/System/Library/Extensions/OptionQC.kext
(com.option.driver.OptionQC)
/System/Library/Extensions/RIMBBUSB.kext
(com.rim.driver.BlackBerryUSBDriverInt)
/System/Library/Extensions/RIMBBVSP.kext
(com.rim.driver.BlackBerryUSBDriverVSP)
/System/Library/Extensions/USBExpressCardCantWake_Huawei.kext
(com.apple.dts.driver.USBExpressCardCantWake)
/System/Library/Extensions/Vodafone.kext
(com.vodafone.driver)
/System/Library/Extensions/ZTEUSBCDCACMData.kext
(com.ZTE.driver.ZTEUSBCDCACMData)
/System/Library/Extensions/ZTEUSBMassStorageFilter.kext
(com.ZTE.driver.ZTEUSBMassStorageFilter)
/Library/Address Book Plug-Ins/DYMO Address Book Addin.bundle
(com.dymo.dls.addressbook.plugin)
/Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component
(net.telestream.wmv.import)
/Library/Extensions/AirParrotDriver.kext
(com.squirrels.driver.AirParrotSpeakers)
/Library/Extensions/APExtFramebuffer.kext
(com.squirrels.airparrot.framebuffer)
/Library/Extensions/SophosNetworkInterceptor.kext
(com.sophos.nke.swi)
/Library/Extensions/SophosOnAccessInterceptor.kext
(com.sophos.kext.sav)
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
(com.adobe.acrobat.pdfviewer)
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
(com.adobe.acrobat.pdfviewerNPAPI)
/Library/Internet Plug-Ins/DYMO NPAPI Addin.plugin
(com.dymo.dls.npapi.plugin)
/Library/Internet Plug-Ins/DYMO Safari Addin.plugin
(com.dymo.dls.safari.plugin)
/Library/Internet Plug-Ins/Flash Player.plugin
(N/A)
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
(net.telestream.wmv.plugin)
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
(com.apple.java.JavaAppletPlugin)
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
(com.microsoft.sharepoint.browserplugin)
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
(com.microsoft.sharepoint.webkitplugin)
/Library/Internet Plug-Ins/Silverlight.plugin
(com.microsoft.SilverlightPlugin)
/Library/PreferencePanes/Flash Player.prefPane
(com.adobe.flashplayerpreferences)
/Library/PreferencePanes/Flip4Mac WMV.prefPane
(net.telestream.wmv.prefpane)
/Library/PreferencePanes/LANrev Agent.prefPane
(com.poleposition-sw.lanrev_agent.prefpanel)
/Library/PreferencePanes/NTFSforMacOSX.prefPane
(com.paragon-software.filesystems.ntfs.prefpanel)
/Library/QuickTime/Flip4Mac WMV Advanced.component
(net.telestream.wmv.advanced)
/Library/QuickTime/Flip4Mac WMV Export.component
(net.telestream.wmv.export)
/Library/QuickTime/Flip4Mac WMV Import.component
(net.telestream.wmv.import)
Library/Address Book Plug-Ins/SkypeABDialer.bundle
(com.skype.skypeabdialer)
Library/Address Book Plug-Ins/SkypeABSMS.bundle
(com.skype.skypeabsms)
Library/Audio/Plug-Ins/Components/A52Codec.component
(com.shepmater.A52Codec)
Library/Caches/com.apple.Safari/Extensions/LastPass.safariextension
(com.lastpass.lpsafariextension)
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
(com.citrixonline.mac.WebDeploymentPlugin)
Library/Internet Plug-Ins/ClientManager64_0.33.plugin
(com.radvision.SCOPIA_Desktop.plugin)
Library/Internet Plug-Ins/WebEx64.plugin
(com.cisco_webex.plugin.gpc64)
Library/PreferencePanes/Perian.prefPane
(org.perian.PerianPane)
Library/QuickTime/AC3MovieImport.component
(com.cod3r.ac3movieimport)
Library/QuickTime/Perian.component
(org.perian.Perian)
Library/QuickTime/RTPRssmH263.component
(com.radvision.streaming.RTPRssmH263)
Library/QuickTime/RTPRssmH264.component
(com.radvision.streaming.RTPRssmH264)
Library/QuickTime/VidDecoderH263.component
(com.radvision.streaming.VidDecoderH263)
Library/QuickTime/VidDecoderH264.component
(com.radvision.streaming.VidDecoderH264)
Library/Services/WinzipAdd.workflow
(N/A)
Library/Services/WinzipEmail.workflow
(N/A)
Library/Services/WinzipUnzip.workflow
(N/A)
Library/Widgets/BBC.wdgt
(com.ledttextright.widget.bbc)
Library/Widgets/beRuler.wdgt
(com.apple.widget.beRuler)
Library/Widgets/Currency Converter 2.wdgt
(it.com.palple.widget.currencyconverter)
Library/Widgets/Currency Converter 2.wdgt/RoundPlugin.widgetplugin
(it.com.palple.widgetplugin.roundplugin)
Library/Widgets/DYMO.wdgt/DYMO.widgetplugin
(com.dymo.dls.addin.dashboard)
Library/Widgets/DYMO.wdgt
(com.dymo.widget.dls)
Library/Widgets/MightyMonitor.wdgt
(com.johnstarmer.widget.MightyMonitor)
Library/Widgets/MightyMonitor.wdgt/MightyMonitor.widgetplugin
(com.johnstarmer.MightyMonitor4.widgetplugin)
Library/Widgets/Word Of The Day.wdgt
(N/A)
dylibs
/usr/lib/libUFSDNTFS.dylib
Contents of /etc/ssh_config
Host *
SendEnv LANG LC_*
Host *
XAuthLocation /opt/X11/bin/xauth
Contents of /etc/ssh_config~orig (ASCII English text, with very long lines)
Host *
SendEnv LANG LC_*
Contents of /etc/sshd_config~previous
SyslogFacility AUTHPRIV
AcceptEnv LANG LC_*
Subsystem sftp /usr/libexec/sftp-server
XAuthLocation /opt/X11/bin/xauth
Profiles: 3
Font issues: 45
DNS: 4.2.2.1 (static)
Listeners
launchd: ssh
kdc: kerberos
cupsd: ipp
Parental Controls: On
Restricted files: 3697
Safari extensions
LastPass
Widgets
MightyMonitor
beRuler
Word Of The Day
BBC
Currency Converter 2
Elapsed time (s): 380 -
Hello! I have purchase itunes ringtones on my iphone and had been using them. They are in my library on my Mac and in my iphone, but they are not in my ringtone list. Ever since I did the last upgrade for the iphone my purchased ringtones are no longer in the list of ringtones so I cannot use them anymore!! Can anyone help??
Hi lapincoya,
Open iTunes on your Mac and go to the iTunes Store. Make sure you are logged on. In the store, click on the Music tab, then under Quick Links on the right-hand side, click on Purchased>Songs>Not in My Library. You should see the song there with a little cloud next to it.
(Alternatively, you can go to your Library in iTunes, and click on Music, and then click on View in the top menu. You will see an option to "Show Music in the Cloud". If you click on this, then any music that has not yet been downloaded to the Mac will show up in your music list with a little cloud next to it).
Click on the cloud to download it to the Mac.
By the way, when you purchase music on the Mac, you can get it to automatically download to your device by making sure that Settings>iTunes & App Store>Automatic Downloads>Music is turned on, but you cannot get music to automatically upload to the Mac when you purchase music on your device. You have to do what is shown above to get it on your Mac if the purchase originates on an iOS device.
Cheers,
GB -
How to use P_SESSION.GET_VALUE_AS_VARCHAR2 in MDform item default Value
I have a master detail form based on two tables. In the DETAIL_BLOCK section I have an item named 'APPROVAL_STATUS' based on the column of the same name in the underlying table. I have an unassociated textbox named CURR_APPROVSTAT in the detail form for which I would like to set it's default value to the current value of APPROVAL_STATUS when the master detail form is opened in %3D mode via a hyperlink.
I have tried using the p_session.get_value_as_varchar2 in the default value field of the CURR_APPROVSTAT item, but it generates errors on run.
EX:
Item CURR_APPROVSTAT
default value field
p_session.get_value_as_varchar2(
p_block_name => 'DETAIL_BLOCK',
p_attribute_name => 'APPROVAL_STATUS')
Default Value type:
Function returns varchar2
on run, it generates error that p_session must be declared (I get the same error if I use portal.p_session... also).
default value field
select p_session.get_value_as_varchar2(p_block_name => 'DETAIL_BLOCK', p_attribute_name => 'APPROVAL_STATUS')from dual
Default Value type:
SQL returns varchar2
on run, it generates and error that a right parenthesis is missing.
I have also tried using the following in the Additional PL/SQL - before displaying form:
p_session.set_value
(p_block_name => 'DETAIL_BLOCK'
,p_attribute_name => 'CURR_APPROVSTAT'
,p_value => p_session.get_value_as_varchar2(
p_block_name => 'DETAIL_BLOCK',
p_attribute_name => 'APPROVAL_STATUS')
on run, this generates the error identifier 'P_SESSION.GET_VALUE_AS_VARCHAR2' must be declared
My questions are:
1) is it possible to use the p_session.get_value_as_varchar2 in the default value field?
2) If yes, then what if the proper syntax
3) If no, can I set this value when the MD form opens from the additional pl/sql triggers, and if so, what is the syntax?
any assistance you can offer is greatly appreciated.
Sincerely,
ARMIn my detail block I have 10 rows displaying that may or may not have data after querying. To set the default value in the detail block, you have to set the index value of p_session.set_value. Since I don't know how many rows are already populated, I'm setting the default value to all 10 rows. Is there a better approach?
Here's my code example, which I've placed in the additional PL/SQL section before displaying the form...
DECLARE
l_district_id VARCHAR2(7);
BEGIN
l_district_id := p_session.get_value_as_varchar2
(p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'A_DISTRICT_ID');
FOR i in 1 .. 10 LOOP
p_session.set_value
(p_block_name => 'DETAIL_BLOCK',
p_attribute_name => 'A_DISTRICT_ID',
p_value => TO_CHAR(l_district_id), p_index => i);
END LOOP;
END; -
Perl adcfgclone.pl dbTechStack default values...?
Hi!
Our config: DB 10g2.0.2, APPS 11.5.10.2
When we run "perl adcfgclone.pl dbTechStack" then some default values are shown in screen:
Do you want to use a virtual hostname for the target node (y/n)
Target instance is a Real Application Cluster (RAC) instance (y/n)
*Target system utl_file accessible directories list [var/tmpprod]:*
Number of DATA_TOP's on the target system [6]:
...Where are those settings saved and retrieved in runtime? I'd like to change some default values to some new values (i.e. number of data tops to "7", after adding some luns)... Funny, but I couldn't find the source ... of that pattern.
THX
FunkyHsawwan
I hope I'll not disobey some rules...however here it is:
The script adcfgclone.pl calls CloneContext.class. This java code is responsible for creating the Target
Context file. The default values for the prompts are read from CTXORIG.xml (a
copy of the Source context file). There are some exceptions to this, one of
them being the "number of DATA_TOPs". This default value derives from the
number of "s_dbhome" variables in
+$ORACLE_HOME/appsutil/clone/data/stage/addbhomsrc.xml. This file is generated+
on the Source system by adpreclone.pl, and copied to the Target system during
the copy phase.
As you have uploaded your addbhomsrc.xml and it is not working as specified above indicates you may be hitting a bug.
Your default value appears to equate to "number of "s_dbhome" variables in addbhomsrc.xml 1".+
+This matches an issue reported in Bug 5345502, where an additional variable+
+added for 10g was being counted in addition to the s_dbhome variables, making+
+the default number 1 more than the source. This was fixed for both 11i and R12+
+in :-+
+- CloneContext.java 115.204+
+- CloneContext.java 120.31+
+As the AutoConfig/RapidClone code is collected from the Applications Tier into+
+appsutil.zip, please check the following version on your Applications Tier:-+
+- $JAVA_TOP/oracle/apps/ad/context/CloneContext.class+
+If the version is < 115.204, then you need to apply the latest RapidClone patch:+
+6718351 : 11i RAPIDCLONE CONSOLIDATED FIXES JUL/2008+
+This will deliver CloneContext.java 115.223+
+Please also check the version(s) on your Database Tier:-+
+- $ORACLE_HOME/appsutil/java/oracle/apps/ad/context/CloneContext.class+
+There is also another version on your Database Tier which is copied by adpreclone.pl+
+into the Clone stage area, so we need to confirm that version:-+
+- $ORACLE_HOME/appsutil/clone/jlib/java/oracle/apps/ad/context/CloneContext.class+
+If the version on the Apps Tier is > 115.204 and does not match those on the Database Tier, or you had to apply the suggested patch 6718351, then you need+
+to recopy the AutoConfig/RapidClone code over to the RDBMS Tier.+
+Recreate appsutil.zip using this command on the Applications Tier:+
+- perl $AD_TOP/bin/admkappsutil.pl+
+Copy the created appsutil.zip to the RDBMS ORACLE_HOME and extract it using "unzip -o" to overwrite the existing+
+code.+
+Once you have the latest version, you will need to rerun the "preparation stages" on your Source system by rerunning adpreclone.pl, so the+
+new code is copied to the clone stage area.+
+You will also need to rerun adpreclone.pl on the Apps Tier.+
+Finally, recopy the instance files to your Target system, and when you configure the Target Database Tier, and are+
+prompted for the "number of DATA_TOPs", you should now see the number match+
+that on the Source system, or more specifically, match the number of "s_dbhome"+
+variables in+
+$ORACLE_HOME/appsutil/clone/data/stage/addbhomsrc.xml.+
Rg,
Damir -
I have wondered about this for a while but haven't found an answer, maybe because I haven't searched for the right thing.
With a select list, is there a straightforward way to specify the first item on the list for the default value?
What is the best way to handle a case where the query providing the list of values may take a while to complete? I don't want to double the setup time by repeating the query just for the sake of finding the first item.Yes, it is. I am never using default values but computations. Default value will be set only after page submittion and not on load. A computation will set the item session state on load. Usually, you use some kind of condition for the computations to set the value of the item to something only if the item value is NULL. One of the reasons is also that the computations are visible in the page property and default values are hidden within the item properties.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
It's important to remember that DEFAULT values are only used when a column isn't specified in an INSERT or MERGE, or when the DEFAULT keyword is used. If you don't explicitly declare a DEFAULT value, Oracle implicitly defines the default value to be NULL, and the DEFAULT keyword will even work with such.
Does say this, does the possibility Exist to for example insert a default value 0 in a column (datatype number) (Default value 0) without using trigger and column is specified (e.g. I don't know from front-end if is specified)?
Thanks in advance to allI don't know a lot about Forms, but if it will generate in insert statement like this:
SQL> CREATE TABLE t(a NUMBER, b NUMBER DEFAULT 0 NOT NULL);
Table created.
SQL> INSERT INTO t VALUES (1,NULL);
INSERT INTO t VALUES (1,NULL)
ERROR at line 1:
ORA-01400: cannot insert NULL into ("OPS$ORACLE"."T"."B")then yes, unless you can control the insert statement, you will need to use a trigger. The explicit NULL in the VALUES list will override the default.
John -
Report Parameter Default Value at runtime
Post Author: DMiller
CA Forum: .NET
Hi,
I need to be able to create new parameters at runtime and have been somewhat successful in this endeavor. I have one remaining issue that I am hoping that somebody can help me with. Let me explain.
When you create a parameter from within the Crystal XI designer, you are able to specify a number of default values that will display as a list box at runtime. Eg. ParameterName is MaritalStatus and default values are ("Married", "Single", "Divorced" etc). There is also the ability to specify the Default Value in the Value Options area of the screen. This value could be set to any one of the default values above - let's say that I set it to "Single". By setting the Default Value, this causes the Parameter Fields screen, at runtime, to "Select" the specific default value set above - in this case "Single", instead of showing "..." as the parameter value.
The default value setting in the Value Options is beneficial when you have reports that are usually run with certain parameter values and only occasionally these need to change. Instead of having to specify every parameter value, the user only has to set the ones that have not been defaulted or they want to change.
So, I have been successful in creating the parameters at runtime and successfully running the report. I have been unsuccessful in setting the "Default Value" as seen in the Value Options area. I have tried a number of properties on the report parameter object and have not found anything to set this.
Does anybody know how to set the "Default Value" as seen in the Value Options area in the designer at runtime?
Thanks for any help.Post Author: JerryB
CA Forum: .NET
You have described my scnario to a tee. Did you ever figure out how to get the single default value that is available in the "value options" area when working within the Crystal Reports development environment. I am using VB.Net and have a nice report menu form and viewer but recently a user ask me to set the default value in one of my combo boxes and I have been unsuccessful in finding the correct property to use. -
<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com -
Ssrs parameter default value not showing ,when available values is binded to query dataset
I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is not showing in report preview .
Many Thanks
ChandraHi Chandra,
According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
the default values.
Reference:
Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
SSRS 2008 R2 Report parameters have default values and report not to auto run
Hi, I am using SSRS 2008 R2 one of my requirements for a Report is all the parameters have default value and I do not want this report to auto run when users open this report. I can create a dummy hidden parameter to break the auto run for this
report. But I am looking for solutions other than that.
Thanks in advance..........
IoneHi lone,
According to your description, you have a report with parameters. Now you want you report not to run automatically with your parameters default values. Right?
In Reporting Service, if you have parameters with default values in your report, your report will always auto run with these default values. We can say these default values are used for report running initially. So for your requirement, if you really need
to see your default value before the report running, the best workaround is set one more parameter to break the auto run like you have done. If you just want your report not to auto run, your can achieve it by removing those default values.
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera) -
Default values of columns not transferred in SSIS Transfer Objects Task
I am working on a project that is creating a new application, my area of the project being the migration of data from the old application database, transforming it, and populating the new database.
The transformations to the old data are done in a staging database.
At the end of the process, the staging database ends up with a lot of new applications tables, populated with the migrated legacy data.
We need to move these tables from the staging database to (initially) our test databases, but ultimately what will be the live database.
We have tried using the "Transfer SQL Server Objects Task" in SSIS, but have ran into a problem that a lot of the database tables have default values for columns.
These default values are not brought over.
Example. Tables contain a "GUID" field, which has a default of value of newid()
Right clicking and the table generating the CREATE script generates
[GUID] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [DF_tbCRM_Client_GUID] DEFAULT (newid()),
However, the Transfer objects task does not create this default of newid()
Examining the SQL generated by the Import / Export Wizard when investigating this shows that the wizard generates this column as
[GUID] uniqueidentifier NOT NULL
and the column default value is lost.
Is there something i should be setting somewhere to force SSIS to bring these column definitions over correctly?Kaarthik Sivashanmugam wrote:
This behavior is by design to maintain backward compatibility with the Copy SQL Server Objects task in SQL Server 2000. Only two constraints (Primary key and foreign key constraints) are expected to be copied by Transfer Objects task.
thank you for you response Sivashanmugam.
How can I move these tables (of which there are over a hundred) from my staging database into the application database - and keep the table definitions correct?
I cannot use the transfer objects task, as this will not define the tables correctly.
I cannot use the import and export wizard, as this will also not define the tables correctly.
This means I will manually have to code the drop, create and inserts for over a hundred tables? -
Any opinions on setting default values on Business Partner level?
Hi All,
I do not have a question, but would like to have a good discussion on how you should preferably be setting default values on a business partner and it's assignment blocks.
In my opinion you have two main alternatives:
1. The "old fashioned" way by using the get_<attribute_name> method and doing some checks for the perticular attribute in the context node.
2. Using the Badi BADI_CRM_BP_UIU_DEFAULTS to fill fields with a default value. With some enhancements on the assignment blocks (making typed_context attribute public and, when not called yet, calling the badi) you can use the badi for all assignment blocks.
Because I discovered via debugging that in the, by many forums suggested, badi code a programm error/exception is used so that the default values are only set during creation mode, I started doubting to use the badi. Because once I had set my data declarations to the right references and the exception did not occur anymore, suddenly it always fills the values even when there are already values filled. So additional checks are needed to assure that I am in creation mode.
Although I like the use of the badi, because all my default values on the whole business partner object can be found in the same place, it is getting a bit strange to: first still enhance the view and context node class, adjust the visibility of the typed_context, call the badi and do all kind of checks to assure that you are in the right view/context node, where this all is faster and more lean and mean when done directly in the get_<attribute_name> method on a context node.
Anyone who wants to give there opinion on this?
Regards,
Martijn.Cameron,
Unfortunately you cannot pass the Account and Contact name before saving the record. Post default tries to capture the name just before the record gets saved, but as the record is yet to be created, the relationship wont exist and only the respective id fields will have values. If you try using account id/ contact id it will work else just pass the time stamp in the name field which will make sure there is some value when the record is saved. later in the back end you might need WS to update the field values. -
Setting Default values for field using custom.pll
Hi All,
I have an rquirement to set the default values on Meterial Tranasction screen for some condition
I tried it in both ways via Form Personalization and using custom.pll
i m using the following code in custom.pll
form_name varchar2(30):= name_in('system.current_form');
block_name varchar2(30):= name_in('system.cursor_block');
trx_type varchar2(30);
subinv varchar2(30);
begin
if form_name='WIPTXMAT' and block_name ='MTL_TRX_LINE' then
if event_name ='WHEN-VALIDATE-RECORD' then
trx_type:=name_in('WIPTXMAT.TRANSACTION_TYPE');
if trx_type ='WIP Return' THEN
copy(10,'MTL_TRX_LINE.TRANSACTION_QUANTITY');
copy(10,'MTL_TRX_LINE.NUMBER_OF_LOTS_ENTERED');
sinv:=trim(name_in('MTL_TRX_LINE.SUBINVENTORY_CODE'));
if sinv is null then
copy(subinv,'MTL_TRX_LINE.SUBINVENTORY_CODE');
copy(fr_locator,'MTL_TRX_LINE.LOCATOR');
FND_MESSAGE.SET_STRING(sinv);
FND_MESSAGE.SHOW;
end if;
end if;
end if;
end if;
end event;
Problem is that default values are getting set but not for all rows . if there are 4 records then values are set for only first 2 rows and if there are 2 rows then defaults are set for 1st row only.
Same behaviour happens when i do it via form personalization
i couldn't understand the behaviour of WHILE-VALIDATE-RECORD event..
Please provide some suggestion on it. its really urgent.
Thanks in Advance
RenuWorks Now...
Maybe you are looking for
-
How to understand the Vector source code for function elements()?
hello all: This following code snippet is extracted from java.util.Vector source code. who can tell me how i can understand what the function nextElement does? thank you public Enumeration elements() { return new Enumeration() { int cou
-
T60 problem with product recovery disks
After Installing disk 1 of product recovery I am getting a message asking for "Final C" disk. I do not have this and I can go no farther with the recovery How can I get past this? What could be causing this?
-
In Firefox 29, is there a way I Can get the orange menu button from the top left back?
In Firefox 29 they removed the button at the top left corner. I was wondering if there was a way to revert back to that button.
-
Transfer whatsapp record from android to iphone
how???
-
Bought Quicktime Pro and my computer died, do I have to buy it again?
I bought Quicktime Pro back in 2006, recently my laptop died and I had to get it a new harddrive. I still have the serial number cause I bought it online. But it says it's an invalid number and I can't use it. Do I have to buy it again? Thank you!