After Bootcamp, I need some help

everything seems to be running quite well after I bootcamped and installed Windows XP. I have a few questions regarding the most basic stuff on the apple keyboard
volume keys (f3, f4, f5) don't seem to work on windows xp
brightness keys (f1, f2) don't work either
in addition, the battery meter seems to be out of wack, which is understandable cuz i mean im bootcamping, everything is not suppose to be running perfectly...
so my question is, is there like an alternative in adjusting brightness on windows xp? cuz it's killing my battery life...
thanks in advance

Actually... under BootCamp your machine is basically a PC. All BootCamp does is allow you to partition your drive to prep it for installing Windows. There is no reason to expect everything to work properly under BootCamp (provided you have drivers).
There should be a little picture of a display in your system tray. You can use that to adjust the brightness of the display.

Similar Messages

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Tho

Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???

thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess.
That would convenient, but sadly it is not the case. Sorry!
Either way your welcome and best of luck!
B-rock

Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

Probably a good question to ask Viber or look at their support site.

Need some help after inserting CMS system

Hi on my site ive inserted an CMS system from Cushy. It all work that isnt the problem. The problem is that my page is a mess now.. The only thing ive addes is a cms code so im hoping the solution isnt hard to do.
There are three pages that are complete changed.
The home page
http://www.vakantiewoningeninsuriname.nl/index.html
The text colomn right under is moved.How can i place this back?
on http://www.dorff.nl/ you can see how it was before i add the CMS.
The next page is:
http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html
You can see there is a lot extra space between the head and the text. And you see that the text is not only at the right side anymmore.
This is how it should be:
http://www.dorff.nl/bezienswaardighedenparamaribo.html
The same goes for this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
And this is how it have to be:
http://www.dorff.nl/prijzen.html
Hope you can help, thank you for looking..
Regards Brian

Dear Nancy,
Thank you for your response,
I will try to explain again what is wrong. On my site you see this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
Problem is that the picture below is on the right side of the page instead of the left like the other pictures.
On:
http://www.dorff.nl/prijzen.html
You can see how it should looks.. Pictures to the left and text on the right. Dont know what happened when im adding the Cuschy CMS. Hope you can see what is wrong.
Regards Brian
Date: Wed, 2 May 2012 13:04:14 -0600
From: [email protected]
To: [email protected]
Subject: Need some help after inserting CMS system
    Re: Need some help after inserting CMS system
    created by Nancy O. in Dreamweaver - View the full discussion
Change this:
Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
to this: <!Begin CushyCMS>
h2. Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
<!end CushyCMS>   Nancy O.Alt-Web Design & PublishingWeb | Graphics | Print | Media Specialists http://alt-web.com/http://twitter.com/altweb http://alt-web.blogspot.com/
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4374962#4374962
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4374962#4374962. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Need some help to unlock the Ipad. Cannot contact the previous owner he is in the shelter and I do not know were. After I restore the Ipad is asking that the previous owner has to remove it from his account

need some help to unlock the Ipad. Cannot contact the previous owner he is in the shelter and I do not know were. After I restored the Ipad is asking that the previous owner has to remove it from his account

Nobody on these boards or at Apple will unlock that device for you. Sorry.
(117810)

Stupidly partition hdd on window7 in IMAC A1311, and now I can not use the IMAC...... Need some help

Just bought a used IMAC A1311 core 2 duo, and there are something called Bootcamp and Window7 on it, and i log in to Window7 and stupidly partition hdd on it, and i think it has formatted everything. now the window7 is error and I do hold (alt) key when I start up the machines , it show only the window7 hdd and i don't see any Recoery HDD........what should i do? Really need some helps right now.........

There are several models that use A1311. So I don't know exactly what model you have. If you received installer discs with the computer, then you will need to boot from Disc 1, erase the drive, and install Snow Leopard. Some models in the A1311 line can use Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Need some help in Rounding a double value to a whole number

Hey Peeps,
Need some help here, I got a method that returns a value in double after a series of calculation.
I need to know how can I round the double value, so for example,
1. if the value is 62222.22222222, it rounds to 62222 and
2. if the value is 15555.555555, it rounds to 15556
How can i do this
Zub

Hi Keerthi- Try this...
1. if the value is 62222.22222222, it rounds to 62222 and
double d = 62222.22222222;long l = (int)Math.round(d * 100); // truncatesd = l / 100.0;
double d = 62222.22222222;
System.out.println(d);
long l = (int)Math.round(d * 100);
// truncatesSystem.out.println(l);
d = l / 100.0;System.out.println(d);
for (int i = 0; i < 1000; i++)
{ d -= 0.1;}
for (int i = 0; i < 1000; i++)
{ d += 0.1;}System.out.println(d);
regards- Julie Bunavicz
Output:
62222.22222222
62222
62222.22
62222.22000000000001

I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated.

I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated. Heres an image of before and after. The first image I use is a JPG 72dpi 1500px x1500px and I want to downsize it to 600x600px same res, but it keeps pixelating, this has never happened before. Any suggestions, thoughts?
thanks!

I wouldn't say pixelated; more like blurry.
Like ConnectedCreative said, what steps are you using? Are you using "bicubic sharper" when resizing down?

Need some help in LiveCycle Designer ES 8.2

Hi i need help with tables in livecyckle.
Example. I create one table with 32 rows and 8 numretic cells, and another table below with 1 row and 8 numretic cells.
In the big table i can input numbers and working fine.
now to my problem. Ex, i want to input number 12 in row 1 cell 3.and then again same number 12 in row 2 cell 3 and i want the result (24) in table 2 row 1 cell 3. is there anyboby who can help me with that See below
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
12
3
5
12
7
9
4
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
4
24
10
14
Best regards Stig

Hi again Steve and thanx for the reply..send you a coupie of my file.
All text on it is in swedish so i can explain a little for you.
Text Veckodag is Weekday,Tim is hours. Frånv. is a shortname for sickness,
Dagtid is daytime Kväll is evening, Helg is weekends, Afton is Big weekend
like christmas day, s-helg is a shortname for big weekendsdays like day
after christmas day, Jour is jour. The field to the left with numbers is
date. Totalt is total
The only fields i need some help with is the field from Tim to Jour. And the
result should apear in the last fielt Totalt
Can also tell that im not so good in english but im learning. And the last
thing of all :Happy easter to you and thanxs again.
Stig in sweden My E-mail adress is [email protected]

HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Error in internet recovery need some Help.

Hello i need some help with this kind of error on my Macbook pro upon recovering in the internet using wifi..
[URL=http://s617.photobucket.com/user/jrockers_143/media/IMG_0101_zps679fa98a.jpg.htm l][IMG]http://i617.photobucket.com/albums/tt254/jrockers_143/IMG_0101_zps679fa98a.jpg[/IMG][/URL]
does anybody knows how to solve this..

Never mind, after a lot of searching adn BS, finally found a tutorial on Youtube on how to get apps without a credit card.
Apple, make your system easier for people out of their country, and people without a credit card.

Need some help with guitar setup...

jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
digitech gnx-3
alesis sr-16
sure mic's
yamaha e203 keyboard
here's the setup:
yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
here's the problem:
everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
any help would be greatly appreciated!

anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

Need some help with wine + midi

Howdi guys!
I need some help. I'd like to run an application which is only available for Windows and OSX, so my choice is wine. This application needs to send midi signals to the hardware it is supposed to control.
In the product's forum there is a thread which shows how it can be done. But the newest releases of wine don't allow this, because it doesn't support jack anymore.
I think basically it doesn't matter which application it is I run in wine, the question is, is it possible to send midi signals in and out through wine? If so, how? Might be that it's quite trivial, in my defense I have to say that I never worked with midi before.
The soundcard I use is an Edirol UA-25 which is fully supported in Linux, midi works.
Thanks for any ideas!
edit: Forgot two things: I know I could try older versions of wine or running it in a virtual machine, but I want to avoid this.
Last edited by Army (2012-04-27 07:15:33)

For that app, you will probably be using the ALSA-midi interface. So, you shouldn't require Wine to have jack support. - In fact, that picture clearly shows that Wine is using ALSA-midi, but he is using jackd + a2jmidid (which exposes alsa-midi 2 jack-midi).
As long as that software doesn't require a special driver, you should be able to use it. As for the specifics, i would imagine that you would start jackd, start a2jmidid and then start your application. - you also have to make sure your midi device is connecting before launching your app in wine - otherwise the device won't show up in your wine app. You also will need to select your midi interface in your application. After this, you should be able to connect your wine app (through the a2jmidi bridge) to your hardware.
But if for whatever reason you can't get it too work ~ i do actually use a VM for updating firmware on 2 different audio devices (a soundcard and midi-controller) - and it works great. I am using VMware, but i would imagine virtualbox would work very similar..
cheerz

After Bootcamp, I need some help

Similar Messages

Maybe you are looking for