After clicking on my FF shortcut icon on my desktop, it takes FF 30-45 seconds to open. Any ideas why this happens?

after clicking on my FF shortcut icon on my desktop, it takes FF 30-45 seconds to open. So i sit there and wai and wait and wait until it finally opens. Any ideas why this happens?

In order to diagnose your problem you will need to download and install the below
Try clicking the tap problematic apps while the trace is running
Install the WPT (windows Performance Toolkit) 
http://www.microsoft.com/en-us/download/details.aspx?id=30652
Help with installation (if needed) is here
When you have, open an elevated command prompt and type the following 
WPRUI.exe (which is the windows performance recorder) and check off the boxes for the following:
First level triage, CPU usage, Disk IO.  
If your problem is not CPU or HD then check off the relevant box/s as well (for example networking or registry)  Please configure yours as per the below snip
Click Start
Let it run for 60 secs or more and save the file (it will show you where it is being saved and what the file is called)
Zip the file and upload to us on Onedrive (or any file sharing service) and give us a link to it in your next post.
Wanikiya and Dyami--Team Zigzag

Similar Messages

  • Iphoto will not re-install after disappearing during a software update, any ideas why this happened?

    Before i ran the software update i had to iphoto icons in the launch pad, both had exactlly the same content so i just ignored it for a wile till i needed to update my photos, which i was hoping to do after the update.
    However when i restarted both iphoto icons had gone and iphoto seems to have been wiped off my mac completelly, I have got a back up of all my pic and videos so this is not a problem of recovering them.
    i have then tryed to instal iphoto from the app store, resulting in there being a perminant downloading icon making no progress over the last two hours.
    If any body has any idea why this happened and what i can do to provent it happening again as well as getting iphoto back the help wil be much apricated.

    In addition to Larry's questions what software update did you apply? Do you still have an iPhoto Library in your Pictures folder? If you do what happens if you double click on it?
    OT

  • I downloaded a game that need to pay, but after that when i want to update or download a free game from app. It opens the pilling page again, and can't download or update anything any more, why this happen?

    Help
    I downloaded a game that need to pay, but after that when i want to update or download a free game from app. It opens the pilling page again, and can't download or update anything any more, why this happen?

    Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
    In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
    [[Flash Plugin - Keep it up to date and troubleshoot problems]]
    [[Flash 11.3 crashes]]
    [[Flash 11.3 doesn't load video in Firefox]]
    Other, more technical information about these issues can be found under these Links:
    http://forums.adobe.com/thread/1018071?tstart=0
    http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
    Please tell us if this helped!

  • My Lightroom (CC) after an update today will no longer open, any ideas why?

    Today I have just updated my CC Photography apps to the latest versions, Photoshop is fine but Lightroom will not open. I have uninstalled everything an re loaded from fresh and Lightroom still won't open.
    Has any one experienced this and know a fix?

    Lightroom . Wont Launch.
    I used this fix

  • My itunes is locked for some reason. When I click on the icon, it just doesn't open anymore. Any ideas why and what I should do to unlock it? Thank you.

    My itunes has been lock for a few days. When I click on the icon, nothing happens. It is like locked or something. Any ideas why this happens and what I need to do to unlock it? Thanks in advance!

    Hi,
    Check in Add-ons to see if you have any toolbars installed:
    [[Uninstalling add-ons|Uninstalling add-ons]]
    Because the Ask Toolbar (a custom version I think) is sometimes installed (or offered to be installed) with other programs, such as Foxit Reader.
    Jack

  • After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2.  After clicking the download button, the screen just turns dark and is frozen.  Any idea what is happening?

    After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2.  After clicking the download button, the screen just turns dark and is frozen.  Any idea what is happening?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • How do I put a Shortcut Icon on my Desktop linking to a certain Webpage, like I could do with I.E./Google? Where do I find "Create Shortcut' ???

    Question
    How do I put a Shortcut Icon on my Desktop linking to a certain Webpage, like I could do with I.E./Google? Where do I find "Create Shortcut' ???

    Hey, Dynamite !
    Thanks so much for that ... what a 'dynamite' solution. It's so easy. I don't know how you people know all of these things ! But one last thing if you can help me - I've just switched over to Mozilla/Firefox from I.E., and now I cannot open my Hotmail from Mozilla/Firefox. I log in, it goes to my 'Inbox' page, but when I click on an Email letter to open it, nothing happens. I can't even go into 'Drafts' or 'Delete' or anything.
    MitziB.

  • "Add shortcut icon to my desktop" options

    I'm developing a AIR Application Online game where i have 1 Game Lobby AIR App (Flex-Based AIR) and games AIR App (Flash CS4 Built Swf, Create AIR file using Flex to load the Swf file).
    The game have only 1 Lobby(air file) and Numbers of games (air files). 
    Purpose to having multiple AIR file to make use of AIR auto updates features for the lobby and all games.
    I want to remove/unchecked "Add shortcut icon to my desktop" from the Installation Preferences of AIR Application Install dialogue.
    May i know how to do remove/unchecked "Add shortcut icon to my desktop" feature?.
    Thanks.

    Try This.
    Right click on the desktop >> create a new shortcut
    Type: C:\Windows\System32\cmd.exe /c start "" "skype:"
    Click Next
    Type: ModernSkype in Type a Name for this shortcut field.
    Then Click Finish.
    You now have a desktop shortcut to Skype app.
    You can create an icon for this shortcut.
    Log on to ICO converter
    Cick Choose File and search for .png in C:\Program Files\WindowsApps\Microsoft.SkypeApp_1.6.0.114_x86__kzf8qxf38zg5c\images\skypeSmall.targetsize-32.png
    Then Click Convert. New icon will be downloaded.
    Now Right click on ModernSkype desktop shortcut  and click Propeties then Click Change Icon and locate the downloaded icon file, Click OK.
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Attachments:
    Icon.zip ‏13 KB

  • When I click on an Icon on my desktop to take me to a site (such as google) I get a message that it could not find the loaction. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened.

    When I click on an Icon on my desktop to take me to a site (such as Google) I get a message that it could not find the location. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened. Then when I close the window I see that the message is still there. I have to close it separately. Any suggestions? Oh, and this only happens if Firefox is NOT already active. If I have another Firefox window open when I click on the Icon, it just opens as expected. This message appears no matter which site Icon I select. It did not happen before I upgraded to ver 9.0.

    Hello BassoonPlayer,
    Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using.  FaceTime will not work if you do not have the proper time zone set up for the location that you are in.  This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly.  By the way, you described your problem very well, which makes it easier for us to help you.  Hope this solves your problem -- if not, post back and I can suggest other remedies.
    Wuz

  • Emails in my 'trash' are being deleted after about 5 weeks, but I want to retain them. I have elected 'never' on the 'permanently erase deleted messages' option, so I'm not sure why this happening?

    emails in my 'trash' are being deleted after about 5 weeks, but I want to retain them. I have selected 'never' on the 'permanently erase deleted messages' option, so I'm not sure why this happening? any ideas?

    iCloud emails in the Trash are deleted after 30 days on the website, and this over-rides the 'never' setting in Mail. There is no way of stopping this. (The Trash isn't really intended as a permanent storage area.)
    Try this workaround. Go to http://www.icloud.com and go to the Mail page. In the sidebar, click on '+' to the right of 'Folders' to create a new folder; give it a suitable name.
    Now click on the cogwheel icon at bottom left. At the bottom of the pane which opens, set the 'Move deleted messages to' drop-down menu to your new folder.
    I'm not sure whether, when you delete messages in the Mail application, they will go to the Trash or your new folder - you'll need to experiment. I have a nasty feeling that Mail will simply move them to the Trash as before. If this is the case you will have to move them to your new folder manually - dragging messages directly to this folder rather than hitting the delete key will be the easiest way.

  • In Icloud I can't see my "numbers" icon which i need to select "tick" to transfer data to my other devices via icloud. any ideas why it's not showing up?

    In Icloud on my imac I can't see my "numbers" icon which i need to select "tick" to transfer data to my other devices via icloud. any ideas why it's not showing up?

    You have to do it app wise, which means that the icon won't show up in settings, but you will be able to move files from your local drive to iCloud via the Numbers app (move... > choose the iCloud option).
    It requires that you set up the same iCloud account on all your devices and that you have the latest version of Numbers on all your devices as well.

  • Sometimes after putting my iMac to sleep, I can't get it to wake up and have to turn it off at the mains. Any ideas why?

    Sometimes after putting my iMac to sleep, I cannot get it to wake up again. It's as if it's shut down and I have to turn it off at the mains and restart it.  Any ideas why? Does this keep happening to anybody else?

    That message means that you have to restore the iPad now. Something went wrong. You need to restore the iOS software and then restore from the backup.
    Read this carefully and follow the instructions. Make sure that you restore from your backup at the end of the process. That is covered at the bottom of the support article.
    http://support.apple.com/kb/HT1414

  • My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

  • I stopped using iCloud after another family member received all my contacts. Now I want to restart using iCloud. How do I prevent this happening again? We share the same Apple id password and credit card but different usernames.

    I stopped using iCloud after another family member received all my contacts. Now I want to restart using iCloud. How do I prevent this happening again? We share the same Apple id password and credit card but different usernames.

    If two of you shared the same contacts you were logged in with the same Apple ID. In order to avoid this you need to use different Apple IDs, and be using separate Macs or separate user accounts on the same Mac.
    One or other of you should create a new Apple ID at http://appleid.apple.com for which you will need a non-Apple email address which hasn't been associated with another Apple ID.

  • I activated an iTunes gift card, my iPod showed the amount available ($15) and after downloading 2 songs all I had left was $.04.  Any ideas on what happened to my funds or how I can find out where the rest of the money went?

    I activated an iTunes gift card, my iPod showed the amount available ($15) then after downloading 2 songs my balance was $.04.  Any ideas on what happened to the rest of my funds or how I can find out where the rest of my money went?

    - Have youwent to yur iTunes account looked at your puchase history for purchases thant y might have forgotton?
    - Maybe you had an unpaid balance before redeeming the card.
    - Contact iTunes
    Apple - Support - iTunes - Contact Us

Maybe you are looking for

  • MR11 log file

    Hi, While run MR11 for GR/IR clearing account a log file is generated and document number is 5400000010. Where this log file is stored by default and how it should display ? Beside F.13 automatic clearing  clears those GR/IR records whose balance sho

  • Went to apple store bought new mac and hp B210 printer can't get wireless printer to work right all

    I cannot get the HP B210 wireless printer to work consistently with my iPHONE 4 or to print consistently from my home mac computer ?

  • Problem in scenario JDBC - XI - File

    Hi, In my scenario, data is fetched from database and passed on to external file. In my design i have put source structure which is exactly the same as database structure and mapped it to target structure. Message interfaces for both the source and t

  • Problems with tutorial: Building an Application

    Hi, I made the step by step tutorial (Building an Application Part 1: Application Objects, http://developer.java.sun.com/developer/onlineTraining/new2java/divelog/part1/page8.jsp) There is a problem. If I compile the DiveLog.java Code as it calls on

  • WM PP interface

    Dear WM Gurus, I am working on WW-PP interface, I would like to check if there is any configuration settings that i need to do so that the system will create seprate transfer requirements / orders for each BOM component when i release the production