After downloading Lion the noise level of the fans increased. A noise which did not exist with Snow Leopard. Any ideas how to reduce noise?
After downloading Lion the noise level of (what I believe to be ) the fans increased. A humming noise which did not exist with Snow Leopard. Any ideas how to reduce this noise?
I have seen this mentioned a dozen times, here, on Lion,and MacRumors.
Nope. Usual suspects.
And whether you tried a clean install instead (backup and erase) and then use MA to import
Similar Messages
-
My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?
Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this. -
When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it. Called Apple tech and they did not have a solution. Any ideas?
Try these places:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
TimeMachine 101
https://support.apple.com/kb/HT1427
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718 -
the keyboard on my ipad has disappeared and I can't seem to get it back.Any ideas how to get my keyboard back?
Standard troubleshooting steps in order are as follows - checking after each one to see if the problem is resolved:
Power your iPad off and on.
A reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPad with iTunes from your iPad's backup.
Restore your iPad with iTunes as a new iPad or not from your iPad's backup. -
The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
Any idea how it can be fixed??????Hello,
You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy. There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player? Not knowing the model of the Sony it is hard to investigate.
And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
JT -
I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS(Ireally don't remember if it's a 3G or 3GS), iOS 3.1.2. Thanks for your help
please help me!!!
-
I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?
If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
Look at B5 and B6 here about connecting to your backup.
http://pondini.org/TM/Troubleshooting.html -
I found a iPad Mini and would like to return it to the original owner. I believe it was previously stolen and it cannot be activated. Any idea how I can get it back to the original owner?
I am very disappointed (yet I somewhat understand) Apple and how they completely have no interest in helping return lost items. I don't believe the person who traded me this was from around here so I don't even know where to begin. I seen on ebay you can sell them for parts but I don't really believe in doing that and would like to at least try my best to get it back to whom it belongs to. I will be contacting my local police department regarding this but I don't think they will be able to do much if it was stolen from somewhere else. However if nobody claims it in 90 days and I have a letter from my local police station saying I am the new owner, will that be enough for apple to unhold their policy of proving the item belongs to you?
-
I have a red "i" message - The backup disk image “/Volumes/_________’s Time Cap/Macintosh.sparsebundle” is already in use.
Any idea how to fix this?Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue 98% of the time. If you are in the unlucky 2% category, more help is here:
The Backup disk image ... sparsebundle ... is already in use. -
Hi! Has anybody succeeded in using Presonus Audio box 22 vsl with Os Mountain Lion? They doesn´t seem to connect.
No problems when i used with Snow Leopard. I upgraded: Now Kreonika is not happy. Not happy at all!In cases like this, if you have an Apple store near by, they will most likely install the OS free of charge for you, if you can't bring your Apple ID along to prove you've paid for it.
Would that work out for you? -
help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete
According to Roaring Apps, there is a version of Protools compatible with Lion. But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS. It looks like you need to get up-to-date with your OS and the apps too.
http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3 -
Lion works fine, but it wont recognize my external hard drives. Everything worked with Snow Leopard. Is there a fix?
What's the URL of the page?
In the mean time clear the cache and reload the page. -
help ... after dowloading OS5 my new iPad 2 will not sync with my PC. the message is "USB not recognised" ... any ideas how to fix this?
I had same problem. By chance, I found a "work-around".
On a whim, I tried plugging the USB cable direct into the PC (its an old 'tower' model that sits under the desk) instead of into the port on the monitor. The PC suddenly recognised the iPad.
Why this makes any difference is a total mystery. But worth trying to see if it helps in your case. -
My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.
there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc. -
Info in the title. I've received conflicting advice help from the Apple Store so I thought I'd try here. I've restored iphoto from my lastest back-up on time machine from my old computer (iphoto works well on old computer), I've rebuilt the library, I've put the old library on a thumb drive and loaded it manually. It's all there on my old computer, but won't work in my new iphoto.
Try directly copying the Library from the old machine.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Maybe you are looking for
-
Hello SAPians, I have a issue with regard to Vendor Account Group,can you please help me with some information Issue is: User want to change the Vendor account group of some vendor and there are few things need to be changed for TAX year 2012. what c
-
Satellite P750 Keypad won't let me enter the 1 or 6 key
Hi Folks, Hope someone can help me. My keypad has developed a problem and will not let me enter the 1 or 6 key. All the other ones are working fine. This error seemed random at first, but now seems to be like that all the time. I have done a system r
-
Guys, I have the following query which seem to take quite a lot of time. About 7 hours It is spending significant amount of time on doing the max(dt), as the table has about a million records. Any know a better way of writing this query ? SELECT AB
-
Conversion Agent Deployment ?
Hi I have deployed all the required component for Conversion Agent in PI system using SDM and all successfully. 1. CM_JavaAPI.sda 2. CM_RemoteSupportInterface.sda 3. CM_TransformModule.sda 4. ConversionAgent.sda But then how to deploy my project from
-
New 5508 not handing our correct IP address Scope to LClients
Just inserted a new 5508 WLC into the network. We current have 3 4404 WLCs, and there was a need to duplicate, as much as possible, the configurations on the 4404s, and the design. The 5508 came online as expected. We moved a few access points over t