After Effects installation issues Please help!!!!!!!!!!!

I am trying to intstall AfterEffects CS5 on my computer and I keep getting an error message that the program will only work on 64-bit system.
I have a windows 7, 32-bit system. My question is will another version of Aftereffects work on my computer?  For example will Aftereffects CS4 work?
Please I need help in figuring this out.

Hello,
Would you mind reposting this over on the After Effects forum?  You've posted on the AIR installation forum and I have a feeling you'll get better expertise over there.
Thanks,
Chris

Similar Messages

  • After Effects Rendering Problem (Please Help!)

    Hello, I recently purchased adobe after effects CS6 for my Asus i7 laptop running windows 8 OS with a nvidia graphics card. I had just finished my after effects project and I went to render it out. I chose all my settings as H.264 and best settings. I click render and it starts off fast and rendering fine. About half way through the render it stops adruptly but does not signify any error message on the screen. The software shows that it is still trying to render but the render load bar does not move neither does the time lapse (time remaining).
    If you have any idea what the problem may be or how to fix it please post a comment.
    Thank You!

    We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
    > Renders stopping halfway through has usually nothing to do with the output format, so for the time being let's ignore the theoretical hubub about H.264
    If the format being used is H.264 in a QuickTime container, this can be a problem, since that codec does have problems with the use of many threads, and these problems often occur partway through processing. There is more information about this here.

  • After effects render error Please help me !!

    Hello I create intros with after effects cs4 since I have 32 bit but I can not render everytime I try my movie with H.264 rendering occurs on an error message:
    After Effects plugin AEGP Media OI Plugin: there is a mismatch between output module settings and transcode settings. please verify your settings and try again. property data invalid! MediaOI2 error: 0x400e0004 frame dimensions out of bounds
    (5027 :: 12)
    please thank you in advance for help
    my computer:
    Windows 7 service pack 1
    manufacturers of the computers fujitsu technology solutions
    Processor Intel (R) Core (TM) CPU E6550 @ 2.33GHz 2.33GHz 2Duo
    Operative memory: 2GB
    32-bit operating system

    it means what it says: You have chosen an output setting that is not compatible with you comp settings. Without knowing the exact details nobody can tell you more than that.
    Mylenium

  • MXF and After Effects CS3. Please Help!

    hi guys...
    according to Wikipedia, MXF files are compatible with Adobe After Effects.
    i'm using AE CS3 on a macbook but can't figure out how to open/import Panasonic P2 MXF files into my AE project.
    please help! it's quite urgent.

    Start by reading this section of After Effects Help:
    "Import assets in Panasonic P2 format"

  • After effects crashing unpredictable, please help if you can?

    Only be happening for a week or so. seems to be related to blurs in adjustment layers. ill be using blurs to spot blur certain anatomy for a tv show. sometimes I track and blur  with mocha sometimes manual track. ill be adjusting a track or a mask and ill get one of several unusual  chrashes/errors. usually, its this: <6896> <BEEp_InitSoundPB> <0> Vid rate ratios min, max: 1, 1. . If I reload the project and delete and rebuild the adjusment layer blurs (Box blur and mosaic) and it will render fine. but this happens enough to be a considerable time waster and is interferring with my work. I've looked up the errors online and tried any suggestions i could find (although it seems this error appears for many differ3ent reasons?). I've deleted media cache, changed cache drives, reinstalled video card drivers deleted preferences, turned off open GL, run diagnostics on my CPU. RAM and GPU, all turned up fine. The only thing I havent tried is uninstalling and reinstalling AFX which i want to leave for a last resort as I have no time! Also, I have CC and CC14 installed (just use cs6 more often because of plugins) and when I load the project into CC and scrub or render I get the same problem, again until I delete and rebuild Adjustment layer. I even collected and moved the project onto a mac laptop and it gets the same error!!

    I apologize if I'm not using the correct terminology, I did in fact teach myself after effects, if that's what you mean. I've been using it for about 14-15 years, but I have found like many of the programs I use, Ill never learn all there is to know, and I would definitely defer to your judgement Dave as I have a great deal of respect for your experience and AE knowledge, having read many of your helpful posts in the past. (thank you, you've helped me before, and did not know it)
    This is the first time I've encountered this particular error. Let me see if I can describe it better. The show I work for often requires me to blur out certain objects or anatomical parts for approval by standards and practices. Usually my workflow is to either manually, or with mocha AE track the offending area with a mask applied to an adjustment layer that has a box blur and a mosiac filter applied to it. The problem arose last week when I went back to a project created the week prior to add more blur to an existing comp. I started to adjust the blur and while scrubbing through timeline after effects crashed, giving me the following error <19665> AE.blitpipe <2> making new context. (or a variation of that, unfortunately, I didn't write down the initial error as  at first I thought it was just an annomoly). When I reloaded the project I kept getting the same crash/error until I removed the adjustment layer and re tracked and blurred. I tried the same comp on a mac laptop and it got the error as well.  I managed to get the render out in time and continued to work in after effects problem free until another blur project arose. this project had 10 shots. I followed my usual workflow and had finished all 10 comps and as going back through to tweak some masks when the error occurred on comp 4. same problem. also it seems as though whenever i reach the same frame range in the timeline is when it crashes, and its not always on the same frame, just in the same general area on the timeline. this happens sometimes during scrubbing, but always during render or RAM preview. I can open the original project where the error occurred and still get the same error in the same area along the timeline. Honestly, Im wondering if I have a corrupted DLL and just need to reinstall after Effects., but the question remains, if that IS the case, why would the same project give me the same errors in each version of after effects I own? (CS6, CC & CC2014) This is why I say corrupted project... not sure what else to call it?
    And Ive gotten a variety of error messages during crash, I've gotten the :<19665> AE.blitpipe <2> making new context as well as <6896> <BEEp_InitSoundPB> <0> Vid rate ratios min, max: 1, 1. and <271636><DynamicLink> <5>  c:/programfiles\adobe\adobe premiere...
    also different faulted modules when I click on details, sometimes ADM.dll sometimes wintab32.dll.. not consistent at all. This doesn't happen evertime I apply a blur layer, its just seemed to occur when time was most precious and I really needed to get renders out! haha, well thats what it feels like anyway. my wor around is now to immediately delete the problem adjustment layer, retrack and blur, but I'm hoping to find an answer for this irritating puzzle. I hate not understanding why this is happening.
    I appreciate the help on this. I will probably reinstall after effects or perhaps even windows once I find the time, but time is hard to come by.
    Seth

  • How to fix rough edges text in After Effects cs4? Please help.

    How to fix this? rough edges in text.
    in the first, it's not like this but the next i open after effects cs4, it goes like that.

    Hi there mato31,
    Hopefully this will help — if that screenshot is your comp window at 50%, then I would hazard a guess that the resolution quality of your comp window was set down to half or quarter quality (this would be my first guess in this instance, worth a try?). If you look across the bottom of the comp window next to the RGB channels icon, the drop-down menu for the comp window resolution is there. Does yours say perhaps Quarter or Third? Just a guess... Usually one would work at Full, but I usually leave it set to Auto so when a comp is viewed at 50%, it automatically changes the quality to 50% which leaves smooth edges (a comp viewed at 50% zoom factor, with full resolution, looks jagged also).
    Anyway, just a first thought. Let me know if that helps at all?
    Steve
    Steve Holmes
    Creative Director
    Energi.design, Munich

  • Installation Issue - Please help me

    Hi Friends,
    I have purchased & installed Adobe Design Premium CS4 three months ago on a machine in USA office and have not registered it.
    I had taken a copy of the Adobe Design Premium CS4 DVDs to India. I tried to install the same Adobe Design Premium CS4 on a machine in India office. I am getting the error message as "Wrong serial key".
    Could you friends please help me out?
    Thanks
    Jeevanath

    Hi Jeevanath,
    Just to let you know that registering a product does not make any difference.
    Let us know how many computers already have the product (with the same serial key) installed and running ?
    How about telling us the operating system you are trying to install this product on..?

  • ...big trouble after leopard installation. Please help!

    I have recently upgraded to Leopard from 10.4. After the installation everything seems normal, the computer boots as usual, I am able to log in and everything seems fine. The first thing I do is to connect my external hard drive [Formac disk 800 XTR] - 800 GB via firewire, because that's the place where my files are.
    Then the following message comes up:
    "The hard drive "xxx" could not be repaired by the computer. You only get limited access to it. You have to backup your data and reformat the hard drive as soon as possible."
    What I notice now is that finder is not working. I can open most other programs and the dashboard but not do anything in them.. I pull out the hard drive and restart the computer, but it's still the same, finder is not working, you can open some programs, the dock and the dashboard are usable. I can't access any disks, which means that i can't reinstall leopard or revert to tiger.
    Also, I have never had any trouble with that hard drive before, and just over five seconds it has to be repaired.. It was my secure backup...
    I can't open it with my macbook either.
    Any suggestions on what to do?
    My specs are
    iMac G5 (Power PC) 2,0 GHz 2GB ram

    Yep, meeting the minimum requirements will get you minimum performance. A machine that runs Tiger great may not be able to keep up with all the new code in Leopard.
    CockTail is just another utility program that I keep around. I leave my computers running 24/7 so I don't need to worry about the daily/weekly/monthly maintenance scripts. They used to be called cron tasks, but are are being handled by launchd. They run very early in the morning and if the computer is not running, they may not run very often.
    Cocktail can run them manually without you having to resort to terminal commands. It can also give you access to several other utility type settings like enabling journaling, deleting DS Store files, tweaking network transmission settings, showing hidden files, and many other settings that you can work with in Terminal if you want.
    Use it sparingly.

  • 11.1.1.3 - BPMA re-installation issue - Please help

    Hyperion Legends,
    I am having some difficulties with the re-installation of 11.1.1.3. Due to a bad deployment which ruined essbase. I decided to un-install everything SS, Essbase, Planning, Workspace, FR and BPMA.. the whole lot basically (using the uninstall tool). After that I deleted the hyperion folders and began re-installation. Again it ran fine and I carried out textbook configuration.
    It was all going smooth until the point where I was configuring workspace. On the following screen it came up with an error message about the folder path not being available??
    http://i839.photobucket.com/albums/zz320/stephenoneill88/workspace.jpg
    But it allowed me to carry on with the configuration and all the files appeared to be created correctly in the same location.
    After the configuration I ensured all the required services started up as normal. Now I get the error msg below when I am trying to login to workspace. It complains about FR..and I yes I have checked the services started up correctly and I carried out the standard configuration on FR. (Same as the first time I installed on to the server... I didn't do anything different in this department).
    http://i839.photobucket.com/albums/zz320/stephenoneill88/reportanalysis.jpg
    I understand re-installation is not ideal but I don't really want to re-install the server. This is the 4th time I have re-installed configured 11.1.1.3 please can someone solve my headaches.
    - Using windows server 2003 r2
    Many Thanks
    Stephen

    The workspace error message can mean the service "Hyperion Workspace - Agent Service" has not started fully.
    You can check in the logs \Hyperion\logs\BIPlus\stdout_console_default.log
    If everything is good you should see "ALWAYS [Thread-30] stdout - giving control to the ORB to process the requests" in the log
    If you don't then it looks like you have an installation/configuration issue.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • No Acc. Doc generated after Post Good Issue - please help!

    Hi All,
    I have problem when I try to post good issue, the accounting doc doesn't generated.
    I have created SO, (Order type - OR, item category - TAB, Schedule Line cat - CB), created PO after the purchase requisition was generated in the SO. processed good receipt and created outbound delivery, everything is fine until post good issue, there is no Acc. Doc created automatically after PGI.
    I have check the following setting
    material type attribute setting - ok (standard price control, val.update, qty update)
    valuation level - ok (valuation area is plant)
    valuation grouping code - ok (activated)
    valuation areas assigned to the valuation grouping code - ok
    valuation class(s) is linked to material type(s) vis acc. cat. ref. - ok
    accout grouping for movement type - ok (leave it as default)
    configure auto posting - ok (I have run the simulation test, and created the missing G/L acc in the company code which under testing)
    The WL Acc Doc type is defined and assigned with number range.
    material and accounting period are open
    In Purchase order, the purchase item assigned with Acc Assignment Category E, Special Stock is E, Consumption Posting set in Acc Assignment Category is E, Acc Modification is VAY, GR non-valuated and GR non-val. binding checkboxes are deselected.
    I know the Acc Assignment Cate will affect the auto acc posting in GR, but I am not sure it will affect PGI in the same way.
    Could anyone tell me which value string will be using for this auto acc posting for PGI? My best guess is
    MvT S val. update, qty update Mvt Cns
    601 E YES YES L ?
    Could anyone tell me what cause the Acc Doc not be generated after PGI?
    Thanks for your time
    Alvin

    thanks for reply.
    Regard to the point 2 suggested by Cathy, the account determination for billing is set, the accouting doc is created after billing.
    my problem is no acc. doc generated after PGI.
    meanwhile I have searched a similar problem in other forums, I found some similar reply as Prasanth did, so I think I may try to run VA88 to see the result.
    Prasanth, could you please explain the pinciple behind of why this happen if what you say is correct.
    Thanks for your time!!!
    Alvin

  • 3d models in after effects, 360 camera. please help!

    Hi,
    I've created a 3D stage and I have put a few 'sound and music' models on the stage.
    When I create a 360 camera around the stage, all the instrument models move off the stage.
    How do I keep the models on the stage so they don't move off when the camera is circling around?
    Would love some help!!

    You simply need to position them properly using the Element 3D group controls. Even multiple instances of the effect will align properly, since they use the same camera, you just need to put everything in the right place. As Rick suggested, it would be best to start by zeroing them out and then moving them based on a common origin/ reference point.
    Mylenium

  • JSPShop 1.0a - Installation issue -  PLEASE HELP !

    Dear Java-Gurus,
    I'm running Jrun4 and I have tried in every way to install this script, can someone out there please tell me how to install it using Jrun4 / MySQL, I'm just a newbie.
    http://jspshop.sourceforge.net
    http://prdownloads.sourceforge.net/jspshop/jspShop-1.0a.tar.gz
    Uday K. MOORJANI

    Dear Java-Gurus,
    I'm running Jrun4 and I have tried in every way to
    install this script, can someone out there please tell
    me how to install it using Jrun4 / MySQL, I'm just a
    newbie.
    http://jspshop.sourceforge.net
    This link brought me to a forward to a forward that popped up a lot of ads.
    http://prdownloads.sourceforge.net/jspshop/jspShop-1.0aSo I will not check this one.
    tar.gz
    Uday K. MOORJANII got four words for you: RTFM. And don't post links to spam sites.

  • Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-

    The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
    So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
    ANY HELP OR ADVICE WOULD BE HELPFULL,
    THANKS GUYS

    THANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
    BUT YEAH THANKS AGAIN...
    WASTE OF TIME THIS IS...

  • Dynamic Link from Premiere CC to After Effects CC Issues.

    Just bought a new iMac maxed out 3.75ghz quad-core, 32 gig of ram, 1t solid state and 4 gigs of video ram; so my machine is more then capable of using adobe video applications very well.  I like to do a lot of dynamic link things from premiere to after effects and 9 times out of 10 I use a black video (File>New>Black Video) as my place holder on the time line or you could use bars or a color matte, doesnt matter..  When I do my composite in after effects and then come back to premiere to render, it takes freaking forever if I leave after effects open.  If I close after effects then do the render, it fires through the premiere render and no problems. 
    Now I also have a maxed out 12 core 64 gig ram Mac Pro tower at work and I have the same problem.  Is this a known bug thats in the works of being fixed?  Is there a work around instead of closing after effects to render to make it work smoother?  Is adobe aware of this issue?  Nothing is crashing or failing, its just taking a long time to render when i dynamic link if i leave after effects open.  Any help or feedback would be awesome, thanks!

    Todd_Koprivas
    I spoke with vidya sagar from tech support a few minutes ago to get an update on when, maybe this update to fix this problem will be rolled out.  He told me he and his whole team is aware of the situation.  He mentioned its a problem where ram between premiere and after effects isn't being balanced out enough and thats why premiere is taking so long to render out after effect compositions.  With all do respect, I'm not trying to be a nag.  Can you maybe give me a progress report on where the team is with fixing this related issue?  Vidya said your the man to ask and that you're a very reliable resource to get information out of with problems such as this.

  • Trackpad Issue - Please Help!

    Hi there,
    Hope you can help me out here.
    I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
    A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
    These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
    Unfortunately I now have a totally different problem.
    There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
    If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
    This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
    Appreciate your help here.
    J

    I'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
    I can't thank them enough.
    My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
    The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related.

Maybe you are looking for