After I updated my OS to Lion, I can't open iTune!
after I updated my OS to Lion, I can't open iTune!
why?
I already delete the iTunehelper , but still doesn't work!!
please help me!
Hello Pisinmonki
Yes you can setup Boot Camp with Mavericks.
Boot Camp 5: Frequently asked questions
http://support.apple.com/kb/HT5639
Regards,
-Norm G.
Similar Messages
-
After I Update to IOS 7.1 I can't open the excel file attached in my email
After I updated my Iphone 5s from IOS7.0.6 to IOS7.1 when i check my email i can't open excel file attached in my email i check with my frineds phone thy have same issoue
David_PDX wrote:
Hi Alex,
The trick to this whole thing is to scroll to the bottom of the message. There should be a dashed line at the bottom of the email message with text underneath it that says, "This message was downloaded as plain text." Underneath that it should say (in blue hyperlink text) "Download full message". Select that hyperlink, and the Excel file should download completely. You should then be able to select the document and have it open correctly.
I have had the same concern regardless of file format that is sent, so I do not believe your issue is with file format. Hope this helps.
I've seen the same thing happen with images, which it displays in a corrupted form. It's fixed by downloading the full message.
There's a more serious side effect of this, which I've now seen with several types of files. If one FORWARDS the email to someone else, the attached files it sends them are CORRUPTED and unopenable too. In the case of a Word files I looked at, it had dropped the last two bytes of the file.
The workaround for that is to download the full message before forwarding.
I'm seeing this happening with so many types of attachments that I'm assuming it affects them all. Please everyone report this to Apple feedback (http://www.apple.com/feedback/). It's one thing not being able to open a file on your device, it's another to have files corrupted permanently just by forwarding. -
Since I downloaded lion I can't open iTunes
ever since I downloaded the Lion software. I cannot open itunes_ a window pops up and saysThe file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now? When I download it it then says file cannot be expanded due to it being being corrupt when downloaded and will ck again when a software update runs again. So I still dont have itunes? HELP
Have you tried downloading it from http://www.apple.com/itunes
-
After I updated to OS X Maverick I can not open files in Lotus Notes Smart suite. Is there any way to solve this problem?
Ok this worked to solve the error.
Use cmd prompt in windows 7 or 8 and run as admin:
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
No need for all that power shell nonsense as shown elsewhere for windows 8.
That's it. Also force smb2 disabling on the apple side for good measure.
With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away. -
I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!
Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post. I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store -
After updating IOS 7 i can't open Itunes Store on my Iphone anymore
After updating IOS 7 i can't open Itunes Store anymore.
Same issue here on iPhone 4 after upgrade to IOS7. When launching iTunes store the iPhone loads data for a few secs, but then the screen is completely empty: No movies, no music, no genius.... The all page is completely white ( orblack for movies).
Tried all these tricks w/o success:
- Log off and on again on iTunes account
- Change system language
- Disable all iCloud syncs
- Disable all automated downloads from app store and iTunes store
Interestingly, iTunes store works perfectly with same account on iPad 2 after updateto IOS 7
Next I will try is to sync with MacBook.
Anyone solved it already pls post ! -
After I updated my iPad to iOS 6.1.3 from iTunes on my MacBookPro today, I lost all my apps. How can I get them back?
You can also download past purchase
http://support.apple.com/kb/HT2519 -
I can't open iTunes after just recently updating it on my mac mini. Instead a msg appears: "This copy of iTunes is corrupted or not installed correctly. Please reinstall iTunes. Will I lose my library
I do not know if iTunes is in your computer at all
icon in the applications folder = application .
Download iTunes :
* http://www.apple.com/itunes/download/ -
I'm using tweetdeck to open links , I can click on tons of link I want to open without the firefox window pop up but after i update to 14.0.1 version, the window open or pop out every single time when I open the link, how can I just open the link but not the window?
yesssssss , EXACTLY !!!! before the update ,whenever I open an external link, Tweetdeck used to stay in front, and now Firefox moves in front of Tweetdeck<<<< EXACTLY !!!
-
why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
How can I open iTunes after recent update 01/25/2014
After installing the recent update for iTunes, I can't open iTunes. Tried to uninstall/reinstais missing, with same results. I have received several error messages: MSVCR80.dill is missing. Please re-install, error 7 Windows error (126).
When will this corrupted download be fixed? I can't access iTunes at all.Do the following:
Uninstall from Windows the following four programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator. -
I have an iPhone 4s. After I updated to the Operating System 7, I cannot open the WiFi. Please help.
I have an iPhone 4s. After I updated to the Operating System 7, I cannot open the WiFi. Please help.
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
After updating to Mavericks, I can't open iTunes. I keep getting a pop up telling me iTunes needs to run in 64-bit mode. After following directions several times to go to Finder, iTunes, Get info and "unclick 32-bit mode" it still won't work and i keep getting the smae pop up window. I've rebooted several times also.
What version of iTunes do you have? The current version of iTunes for Mavericks is 11.1.5 and the default mode is 64 bit. If "Open in 32 bit mode" is checked and you cannot uncheck it are you logged on using an account with administrative priveleges?
-
Can't open iTunes any more?! (after software update)
After the last software update I can't open iTunes any more. Error message: "you can't open the application itunes because it is not supported on this type of mac". how is that possible? does the system really update to a itunes version, I can't run? how stupid is that?
thanks!I think what you are saing is that you have error message free launch failure with iTunes.exe persisting on the processes tab .
If so this is commonly due to a problem with cryptographic services. Here is a diagnostic Method for working out the problem:
Before checking if iTunes works, restart your PC or close the iTunes.exe process with task manager if it is running.
A couple of simple things to try:
http://support.apple.com/kb/TS1776?viewlocale=en_US
Stop the bonjour service, this FAQ has instructions:
http://support.apple.com/kb/HT2250?viewlocale=en_US
But usually it is due to a problem with cryptographic services.
Check to see if you have your smart card service and that it is not set to disabled. For some reason iTunes needs it.
Start>>Run>>Services.msc
you should find the smart card service in the list. Report back with your findings.
Malware can interfere with cryptographic services and also prevent a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
Then work through *Method 4* in the following link:
http://support.microsoft.com/kb/822798
You should be able to copy and paste the individual lines to save on typing.
Make a careful note of any error messages you get, they are important for diagnosis. Report back any error messages especially the names of any dlls mentioned.
If there are no errors try starting iTunes. -
hello, my 1st time here..after updates my mac yosemite my illustrator can't open. It ask me to install "legacy Java SE 6 runtime" it also affecting my dreamweaver and flash rest are fine. Im bought adobe creative suite 6 DWP. thanks
rezala,
You should be able to get round the issue altogether without the legacy version (and its security implications), by following this:
http://oliverdowling.com.au/2014/03/28/java-se-8-on-mac-os-x/
It is even more thoroughly described in this thread, see post #3 on by gator soup:
https://forums.adobe.com/thread/1706469
Maybe you are looking for
-
What is the best strategy to save a file in client computer
I want to save some information in a file in client computer. What is the best strategy to do? There are some ways I can think about. But none of them is good enough for me. 1. I gave all-permission. So, I can actually write what I want. But, in orde
-
Does somebody has a driver for canon IP4600 series which works on OS X Mavericks?
Everytime I try to use my Printer apple tries to configurate first. After waiting some time they are telling me that the software-website is not online at the moment. Does somebody has an idea how to use the printer? Would be great Thanks Julius
-
How can I see my desktop on Apple TV
-
Firefox flickers during ADF PPR
Hi, When a PPR event is fired on ADF page element, which sets values to other fields, the panel or page is going grey for a while before re-rendering. Did anyone face this? This 'flicker' is supposed to be firefox bug as per some forums. Also, this f
-
Calender feature in Journals picks up the day photo uploaded to ipad, not when it was taken.
So, I was playing around with iPhoto on my iPad, I made a photo journal, and I put a calender beside a photo, but suprisinly, the calender showed the date the photo was UPLOADED onto my ipad, not when it was taken, which was around october in 2011.