After I updated to 6OS from 4Os, some of my email will not open...says I am not connected to the Internet?  HUH???

After I updated my 4OS to 6 OS, some of my email will not open as it says I am not connected to the Internet.  This is a first...HUH?

Try connecting the two computers together and dragging the iPhoto library dorm the pictures folder to the desktop then dragging the iPhoto library from the old computer to the pictures folder of the new and launching iPhoto. That should work and if rpeverything is good trash the iPhoto library on the desktop
LN

Similar Messages

  • I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please

    I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please

    Hi Blueandpink,
    If you are running iOS 4, you will need to update the iPad via iTunes on your computer (can't do OTA updates unless you have iOS 5 or higher).
    If you have a first generation iPad, unfortunately you won't be able to update to iOS 6 (iOS 5 is the highest you can update to on the original iPad).
    If you are on an iPad 2, 3, or 4th generation with iOS 5 and it still isn't working, try holding  down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the update issue. Try updating again.
    Hope this helps!
    ~Joe

  • TS3694 My iPad won't update software saying it can 't connect to the Internet which is not true as you can see from me being able to write this. there is no error code. It just says unable to verify, try again later. Any suggestions?

    My iPad won't update iOS 7.0.4 software saying it is unable to verify because it can 't connect to the Internet and to try again later.  It doesn't display an error message number. Obviously I can connect otherwise you wouldn't be reading this. Any suggestions? Many thanks for your help.

    You didn't specify which way you are trying to update - using the Software Update setting on the iPad or by using iTunes. I will assume that you are using iTunes because the kb article that linkd you to here was the one about iTunes error codes.
    Quit iTunes, reset your iPad, restart your computer and try again. Disable your firewall and antivirus software of you are using it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Is there some way i can find my stolen ipod without it being connected to the internet?

    My iPod touch (5th gen) was stolen. I tried to track it down but it says it is offline. Does this mean they deleted everything I had or can I still track it down without it being connected to the internet?

    No.
    What To Do If Your iDevice Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. iCloud- Use Lost Mode
      6. What to do if your iOS device is lost or stolen
      7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      8. Find My iPhone
      9. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • Every Time i go into itunes and try to update my ipod it says i need to connect to the internet. But my internet is just fine i am running on ios 4.3.5 old i know and as far as i know i have the latest version of itunes. Please help

    Everytime i go into itunes and try to update my iPod Touch 4th gen running on iOS 4.3.5 its says i need to be connected to the internet please check it or something like that and as far as i know i have the latest version of itunes

    What is the exact wording of the error message?
    Maybe this:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Try disabling the computer's antivirus and firewall.

  • HT201320 My email account is set up properly, I can connect to the Internet, but I cannot get mail from the Mail app.

    My mail account is set up properly, I can connect to the Internet, but I cannot get mail from the Mail app on my iPad.

    Hello echo1946
    Start with the first article to troubleshoot the issue of not getting mail on your iPad. When you get online using safari, check to see if you can log into webmail. Also keep in mind, depending on the account that mail sometimes might not come in if it is a POP account as it may have already been download elsewhere.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Mail Settings Lookup
    https://ssl.apple.com/support/mail-settings-lookup/
    iCloud: IMAP
    http://support.apple.com/kb/PH2585
    Regards,
    -Norm G.        

  • I would like to diactivate my Indesign software but from some reason it is saying that it cant connect to the internet

    hello,
    A week ago i brought a new computer(Mac mini) and i installed in design on it. the moment i activated it i got a note that i have one month to deactivate the software from my old computer(Mac mini).
    since my old computer does not work and does not open i have no way to deactivate it.
    Is there any way to deactivate the software in any other way????
    Thank you
    Ofer

    Try serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Some programs such as antivirus or spyware won't recognize my connection to the internet so they wont let me update

    What setting do I need to change so that these programs recognize my connection? Even the XP help and support doesnt recognize that I'm connected when I'm using Firefox.

    Delete some wifi profiles in your settings.
    Profile = mac's way of saving a familiar wifi network and password.
    There is a chance you have multiple Profiles for the same home network which can confuse your mac.

  • HELP! I just rented a movie from itunes and it won't sync onto my ipod touch because it says 'You must be connected to the internet to transfer a rented film' but i am connected, What do i do?

    I just rented a movie today of itunes and it is in my rentals however this is my first time renting a movie and i tried to sync it onto my ipod touch version: 4.2.1, (I am going on holiday tomorrow and need it on my ipod before then). I go onto my syncing page and go to movies and my rentals are there and i can move them across to my ipod but underneath it says - 'You must be connected to the internet to transfer rented films' but the thing is i am connected and when i click apply it tries to sync it but then they go back to where they were. PLEASE HELP - i need it done tonight because i wanted to watch them on the plane tomorrow

    Did you make sure that your security software is not blocking the contact to Apple servers? iTunes for Windows: Troubleshooting security software issues

  • I forgot my passcode from iphone 4s. I tried to recover it, but itunes don't connect to the Internet. I have wi-fi and it works, but not in Itunes. What should i do?

    All in the begining

    put device in recovery mode to restore it (HT1808)
    it will delete all your info but its the only way around it

  • It says I need to update Creative Cloud, then I get an Adobe Installer error saying I need to connect to the internet.

    I'm connected through wifi. I don't know how to fix the issue since I am connected to the internet.

    Hi Jreaves,
    Please refer to the below article.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Thank you for contacting Adobe.

  • After i updated my firefox from 3.16 to 4.0.1, have some websites i can't load, and they showed: " database error" but b4 i never got this problem. Can someone tell me why ?

    after i updated my firefox from 3.16 to 4.0.1, have some websites i can't load, and they showed: " database error" but b4 i never got this problem. Can someone tell me why ?

    Nothing is working and I can't find the Roboform toolbar. Your lack of direct support is really irritating- a live chat at least would be helpful.

  • After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

    After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
    Anyone know what is wrong with it??
    Is something wrong with mountain lion or the wifi itself????
    HELP PLEASE!!
    I need to use the internet desperately but i cant...
    Thank you so much xxx

    Hi galleryskins,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    I've quoted some helpful highlights for you:
    OS X Mountain Lion: Zoom content on the screen
    Zoom with a mouse or trackpad
    To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
    For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
    If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
    I hope this information helps ....
    Have a great day!
    - Judy

  • After i update my iphone from version 4 to ver 6, it says that it can't activate your phone.

    After i update my iphone from version 4 to ver 6, it says that it can't activate your phone.

    Has the device ever been hacked or jailbroken?
    Your signature states iPhone 3G, is that accurate?  I ask because the end of the line for the 3G is 4.2.1.  If it were possible to update that device beyond 4.2.1 it would involve hacking or jailbreaking which means you cannot get support here.

  • After update I can't connect to the internet in no way, shape or form

    I rarely update because: 1) something always breaks when you update (like now) and 2) I don't like to deal with new crap like GNOME 3. Anyway:
    I bought a new router (TL-WR1043N) and configured it with an old Ubuntu because connecting to 192.168.1.1 didn't work on any of my Arch Linux installations. Now... here's where it all starts... I can't use the 'n' wireless on my laptop since I have to install something to use WPA, and to install that I need to update, but I don't want to deal with GNOME 3 and Firefox >3. But I gave up eventually gave up and connected my laptop to the router by Ethernet cable. Setting that up was very easy: 'ifconfig eth0 up; dhcpcd'. Voila! I updated my whole system and restarted. To see how badly I damaged my system I opened Nautilus (I use Openbox with some GNOME programs): shock and dismay, the fonts are visible from the moon. I guess I'll have to quit using GNOME programs completely now but I expected that. I used to use KDE back in the day and when KDE4 came forth from that unholy pit, I immediately abandoned it for GNOME. This time we had more time to prepare, everybody knew what GNOME 3 was going to be. I started using Openbox quite a long time ago.
    Anyway: Now to fix my wireless right? WRONG! I can't connect to the internet on cable to get the packages for wireless. I installed Windows 7 64 on the same laptop and it connects to the cable. Ubuntu 9.10 Live also connects, but due to the changes of rc.conf and network stuff I can't connect at all with Arch Linux.
    So I decided to abandon it completely and reinstall from scratch. But the Live CD also doesn't work. With all the ways I've tried it all comes down to this:
    dhcpcd always times out waiting for a carrier and 'ip addr' shows 'eth0: <NO-CARRIER, ....' if the interface is up. I'm not sure what information I should give you, but I can't paste any here since I can't connect to the damn internet on that laptop.
    About the router: the cable is plugged on port 1 and the LED for it flashes if I reboot the computer. In Windows it stops flashing while it connects and flashes again when connected. I removed 'network' from DAEMONS and it flashes till I start it with '/etc/rc.d/network start'. This hangs for a while and returns '[DONE]' even though it doesn't work and the LED never flashes again on the router.
    In rc.conf I have exactly what the example says for DHCP. In any case, it doesn't work with the Live CD either.
    EDIT 1: From lscpi: painstakingly typed:
    06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
    07:00.0 Ethernet controller: Realtek Semiconducctor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
    EDIT 2: Just to be clear: I can use the wireless on the laptop on the Live CD, but I want to use the cable because of the greater speed (94Mbit/s on cable 60 something on wireless n, 20 something on g) and because I rarely move the laptop.
    EDIT 3: lspci -v shows "Kernel driver in use: r8169   /   Kernel modules: r8169", so the driver is loaded.
    EDIT 4: So if I boot from the CD. ip addr shows:
    eth: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
        link/ether 00:1d:92:...etc... brd ff:ff:ff:ff:ff:ff
    And  the LED flashes. When I type: "ifconfig eth0 up" it stops, never to light up again and ip addr shows: "eth: <nO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    Last edited by imtired (2011-09-08 12:36:51)

    When you're in Arch, use output redirection
    lspci >lspci.out
    then boot into Ubuntu or something where you can access the files and the BBS,  Of course, don't forget to use a new file for each command output.
    The new network config in rc.conf is not that complicated (wired anyway; never used wireless).  OTOH I've had issues on two machines where I have to restart the network daemon (rc.d restart network) or rerun netcfg (netcfg eth0) after boot to get connectivity. And I still haven't come to grips with the ip command.

Maybe you are looking for