After installing the maverick i get this message when i try to open iTunes: If you want to run i 64bits modus you must remove the mark:Open in 32bits modus.But i have removed the 32bits and i still can't get it to work!Have maces
after installing maverick i get this message when i try to open itunes:Unmark the 32bits modus-but i have unmarked it several times!The new iTunes requires 64bits modus so what shall i do?
I upgraded my 2007 iMac (20") to Maverick. Should never have done this! Lost mail, lost my mail archive, lost numerous programs/applications, lost all my installed hardware, spend 4 days on getting it running again with the (supreme) help of Apple Care. However it should not have happened at all!
iMac Computers with less than 4Gb of internal memory (as explained by Apple Care), or less than (estimated) 150Gb of free disc-space should not upgrade! Simple as that and the App Store should warn you about that and not simply let you pick up your free copy of Maverick!
Similar Messages
-
The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?
Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again. -
I get this message when I try to Play iTunes album:
I get this message when I try to Play iTunes album: Adobe Reader could not open 'Digital Booklet - Oh, What a Life.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
Do I need to set a different app to open the file? if so which one?
Thanks for reading.
SimonHi ihrtthecowboys,
When tracks in iTunes display a it means the file cannot be located; it may have been moved or deleted. For this issue, see the following article:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Alternatively, if your media was downloaded from the iTunes Store, you may be able to download it again free of charge:
Download past purchases
http://support.apple.com/kb/HT2519
Thanks,
Matt M. -
itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
Am getting this message when i try to play music " unable to configure network stream"
am getting this message when i try to play music " unable to configure network stream"
Hold on... advice to someone downloading from 1337x !!!
Until I saw your comment and googled the term, I had no idea that this was a "downloaded" file. I assumed the "1337x" reference was to dimensions/resolution and Noir referred to genre. (I.e., I use similar notations the differentiate files compressed for TV playback comparisons.) In any case, the advice is the same irrespective of the source.
er, isn't it illegal to download movies ?
Not necessarily. Thousands of movies are probably downloaded daily as legal purchases from such vendors as iTunes. Thousands more are available for free in the public domain, open source/community videos listings, and under Creative Commons Licensing. In short, there are many legal sources of downloadable content and you should not automatically jump to the conclusion that everyone is a crook. -
I have a windows 7 64x SP1.
Every time I install iTunes 12 I get this message when I try to open it:"This copy of iTunes is damaged and it has not been correctly installed. Please, install iTunes again.(-42404)".
The instalation process runs smoothly without any error message and iTunes has been installed in my computer before. The problem started with the update no. 12. Any idea what's going on? Thank youif itunes will not run, you probably have mangled windows badly
one feature of windows 8 is the refresh that saves libraries,
because you are using windows 7, you will need to backup all files to another storage device -
I did the iTunes update yesterday and now I am getting this message when I try to open iTunes - “This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes. (-42037) Can anybody help me out resolving this?
Download iTunes using the tab at the top of this page, re-install. Back up your computer first.
-
I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD
Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh -
"This disc does not use the GUID Partition Table Scheme. Use Disc Utility to change the partition scheme". I keep getting this message when I try to install OSX Lion so that I can upgrade my 17" MacBookPro to move to iCloud. My harddrive was replaced last year by Apple because of a fault by the manufacturer and I think this is the cause of the problem. What can I do so that I don't lose my content.
When you click the partion tab. There is option on the bottom of the window. Click on that there there are these options.
-
I keep getting this message when I try to open FCP X. "The storage location 'brianmassman1' on this computer is already in use by 'brianmassman1' on 'Brian-Massmans-Computer-7". To access the location, quite Final Cut Pro on 'Brian-Massmans-Computer-7' or remove the location."
I have no idea what this means. Particularly the part about "Brian-Massmans-Computer-7." I don't even know what computer that is.
I'm guessing it could have something to do with the fact that I've still got FCP 5 installed. But it's not running.Try repairing permission in the Disk Utility and rebooting,
-
i get this message when I try to listen to my itunes on my computer. Song could not be used because the orginal file could not be found. WHy do I get this and how do i correct it?
Hi ihrtthecowboys,
When tracks in iTunes display a it means the file cannot be located; it may have been moved or deleted. For this issue, see the following article:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Alternatively, if your media was downloaded from the iTunes Store, you may be able to download it again free of charge:
Download past purchases
http://support.apple.com/kb/HT2519
Thanks,
Matt M. -
Getting this message when I try to update The operation couldn’t be completed. (NSURLErrorDomain error -1100.)
There are many people suffering from this problem right now (including me). It appears to be a server issue. Just wait and try checking for updates again tomorrow.
Some things I have heard indicate that this may be a regional problem, though what parts of the world are affected I don't know yet. A few people have been helped by deleting the following preference file (paste the path into the Go -> Go to Folder window in the Finder to locate it), though most have not:
~/Library/Preferences/com.apple.SoftwareUpdate.plist -
I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."
Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos. -
Can someone help out. I'm getting this message when i try to download. The product distribution file could not be verified. It may be damaged or was not signed.
See this link from another similar question. It may need patience to resolve. I think Thomas Reed's suggestion is best place to start.
App Store rejects buy of Mountain Lion: Apple Support Communities -
# Question
I get this message when I try to open my google shared docs this week: "A browser error has occurred. Please hold the Shift key and click the Refresh button to try again." - but that click/refresh doesn't work either. What's up?The backend end is in serious pain....on many levels.
Try this: Connection Problems Form
Maybe you are looking for
-
Double click on menu = exception : managed bean problem ?
Hello, I am a beginner with JSF and I have to work on an existing project. In my Web application, my problem is that if the user doubles click on some navigation links, then an exception is raised. Technically, I think that 2 consecutive HTTP request
-
Trying to authorise new laptop
I am trying to authorise my new laptop so i can transfer books to my nook the message say I can only authorise once which is my old one help
-
HI, In tr.code j1iex capture and post excise invoice without purchase order after entering the materail material type plant & chap id. vendor (who is under excise invoice ref. in chap id), date excise invoice grp doc. date & posting date. in qunitity
-
Can anyone help me please
-
[Athlon64] CAN'T SEE SINGLE SATA DRIVE / K8T NEO no Promise controller
I have a K8t NEO -the cheapskate version with no PROMISE SATA controller or on-board Firewire I have been running on XP SP2 on 2 IDE drives, everything is ok. I added a SINGLE SATA drive and turned the VIA SATA controller on in BIOS. I did the MSI L