After kernel upgrade "file not found"
I upgraded to kernel version 3 and I rebooted but I didn't do anything in menu.lst, because I thought symlinks would work, so I rebooted but it didn't work. I tried to boot changing names in grub menu but I'm always getting same error "file not found" and I don't know what else to do. I can see the vmlinuz-linux but I can't see initramfs-linux file in /boot from a Live CD. Can you share your menu.lst to try them please.
tbuitenh wrote:
I ran into the same problem. I bookmarked this thread earlier, sorry if the problem has been solved in another one and I didn't notice it.
After putting back the kernel and ramdisk from a backup (using different filenames) and downgrading the kernel (mkinitcpio doesn't work, that's why I had to take the ramdisk from a backup), I was able to get back into my system.
I found a mkinitcpio.conf.pacnew, but no significant changes in there. Applied them anyway.
So let's try that again...
sudo pacman -Syu
(3/5) installing linux [######################] 100%
>>> Updating module dependencies. Please wait ...
/tmp/alpm_kwQ6VA/.INSTALL: line 10: depmod: command not found
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
/tmp/alpm_kwQ6VA/.INSTALL: line 12: mkinitcpio: command not found
Optional dependencies for linux
crda: to set the correct wireless channels of your country
That doesn't look healthy. Perhaps a path problem?
[tb@progress ~]$ su -
Password:
[root@progress ~]# pacman -S linux
warning: linux-3.0.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): linux-3.0.1-1
Total Download Size: 0.00 MB
Total Installed Size: 54.55 MB
Proceed with installation? [Y/n]
(1/1) checking package integrity [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) upgrading linux [######################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.0-ARCH
-> Parsing hook: [base]
-> Parsing hook: [udev]
-> Parsing hook: [autodetect]
-> Parsing hook: [sata]
-> Parsing hook: [resume]
-> Parsing hook: [filesystems]
-> Parsing hook: [consolefont]
==> Generating module dependencies
==> Creating xz initcpio image: /boot/initramfs-linux.img
6472 blocks
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.0-ARCH
-> Parsing hook: [base]
-> Parsing hook: [udev]
-> Parsing hook: [sata]
-> Parsing hook: [resume]
-> Parsing hook: [filesystems]
-> Parsing hook: [consolefont]
==> Generating module dependencies
==> Creating xz initcpio image: /boot/initramfs-linux-fallback.img
13946 blocks
==> Image generation successful
[root@progress ~]# ls -l /boot
total 12484
drwxr-xr-x 2 root root 4096 Aug 15 12:18 grub
-rw-r--r-- 1 root root 5216044 Aug 15 12:41 initramfs-linux-fallback.img
-rw-r--r-- 1 root root 1460104 Aug 15 12:41 initramfs-linux.img
drwxr-xr-x 2 root root 4096 Jan 26 2011 memtest86+
-rw-r--r-- 1 root root 1453292 Jul 11 19:22 offmylawn.img
-rw-r--r-- 1 root root 2333056 Aug 6 16:22 vmlinuz-linux
-rw-r--r-- 1 root root 2305152 Jul 9 15:00 vmlinuz-offmylawn
That's better. I'll reboot now and see what happens.
@tbuitenh: I encountered this same situation today when I tried to update linux-ck-corei7 from 3.0.4-1 to 3.0.4-2. Like you, running pacman after "su -" (instead of "su") permitted me to complete the update.
I figure this has to do with default login path, right? What exactly is going on here, and how can I fix it? I don't normally run pacman this way.
Last edited by dhave (2011-09-22 23:07:53)
Similar Messages
-
PCD 10.5 upgrade Task Unified CM Upgrade file not found
Hi,
I have upgraded PCD from 10.0.1 to 10.5.1.10000-6.
Now i want to config na upgrade task to upgrade CUCM 10.0.1 to CUCM UCSInstall_UCOS_10.5.1.11901-1.sgn.iso but when i do browse in task for
Unified CM Upgrade it appear after some seconds popup window saying The Page cannot be updated. Files not Found.
But if i go to PCD SFTP Datastore menu i can see file is there in upgrade folder also i have tried with a firmware file for exemple and problema is the same.
Regards.
MCHi Manish , thanks for the reply
So I switched back to 8.6.2SU2 and then re ran the Upgrade.Switched back to 10.5 and waited.It took about 30 mins but eventually everything came up.Rebooted again to check , and it came up much quicker so that seems to be the way it is.
"Did you take a backup of the newly upgraded 10.5 and then edit its hardware settings followed by a restore?"
Glad you bought this up as I understand that the reason behind this is to align the partitions.I checked my 8.6.2 before istarted the upgraded, using the TAC approved method which said they were aligned
After the upgrade 10.5 reported the partitions aligned.The OVA readme talks about changing the OS NIC etc , which I did .Are there other reasons why I would now need to do a back and restore ? if my partitions are aligned? -
SQL Loader deletes data, after reporting a file not found error
I have several control files beginning:
LOAD DATA
INFILE <dataFile>
REPLACE INTO TABLE <tableName>
FIELDS TERMINATED BY '<separator>'
When running SQL Loader, in the case of one particular control file, if the file referenced does not exist, SQL Loader first reports that the file could not be found, but then proceeds to delete all the data in the table in which the import was meant to take place. The corresponding log file reveals that the file could not be found, but also states that 0 records were loaded and 0 records were skipped.
In the case of all other control files, if the file is not found, the log files simply report this exception but do not show any statisitcs about the number of records loaded/skipped nor does SQL Loader delete the data in any of the referenced tables. This is obviously the expected behaviour.
Why is SQL Loader deleting the data referenced by one particular control file, even though this file does not exist and the corresponding log file has correctly picked up on this?in the ressource name box of your file model, when you push the search button ("...") do you see the file ?
Cause the problem can occur when you write directly the path without selectionning the file with the assistant.
Try this.
I think too that that you can't see the data by right clicking and selectionning View Data ?
Let me know the avancement... -
After synching ipod file not found
I am trying to sync a 20g ipod manually, it says it is synching...but at the end a note comes up saying that the file wasn't found. The ipod is only synching through 1/2 the alphabet.
I am trying to sync a 20g ipod manually, it says it is synching...but at the end a note comes up saying that the file wasn't found. The ipod is only synching through 1/2 the alphabet.
-
[SOLVED] GRUB 2 - "error: file not found" after Clonezilla Restore
Hello,
I backed up my Arch Install which is one root partition covering the entire SDD with Clonezilla, to play around with Gentoo and FreeBSD on my Laptop.
Now I restored the image and when GRUB 2 loads I see "error: file not found" three times for a short momemt before I'm in the GRUB 2 menu.
When I boot my I also see these 3 messages (probably the once from the early loading process) and "Loading Linux ck kernel...." "Loading initrafms...." "Press any key to continue..." When I wait for a short time or press enter it boots like expected (fsck message appears for a short time since I'm using quite boot and I'm in KDM after that).
Grub loading...
error: file not found
error: file not found
error: file not found
Loading Linux ck kernel...
Loading initramfs...
Press any key to continue...
I did not have this when I backed it up. It booted into the menu and when I booted the menu entry it would go black to show me the fsck message and seconds later I was in KDM.
I tried $ sudo grub-mkconfig but it did not change anything.
This is my current /boot/grub/grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch GNU/Linux, with Linux ck kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux ck kernel ...'
linux /boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-ck.img
menuentry 'Arch GNU/Linux, with Linux ck kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux ck kernel ...'
linux /boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-ck-fallback.img
menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
Anyone has a clue what files it is looking for? And why it doesn't boot straight away, when there is nothing that keeps it from booting up normal anyway?
Last edited by blackout23 (2013-03-21 16:16:59)the.ridikulus.rat wrote:Upgrade to grub 2.00, that will give info on which file is actually missing. And then recreate /boot/grub/grub.cfg and check whether that error is gone.
I think I'm already on Grub 2.0.0 otherwise I wouldn't have this cryptic menu configuration file.
local/grub-bios 2.00-1
GNU GRand Unified Bootloader - i386 PC BIOS Modules
local/grub-common 2.00-1
GNU GRand Unified Bootloader - Utilities and Common Files -
"disp+work" process in not getting started after kernel upgradation
Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 55
M sid TNG
M systemid 562 (PC with Windows NT)
M relno 7410
M patchlevel 0
M patchno 42
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid 2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm) 24288 (1104)
M DpShMCreate: sizeof(tm_adm) 51472080 (256080)
M DpShMCreate: sizeof(ca_adm) 432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm) 7583152 (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm) 520080 (1016)
M DpShMCreate: sizeof(vmc_adm) 0 (3208)
M DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm) (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm) 64
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c 2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M pid = 2392
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M workerType = DP_WORKER_DIAWP
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M report = > <
M action = 0
M tab_name = > <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tngC *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB -
File not found error after log on to ADF application
Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance. -
File not found error after database migration
Hi experts
I recently decided to create a test environment for SharePoint 2010 production server but after
attach the content database using power shell successfully I get “ file not found “ error when I try to login the top site collection
I think it’s because of customized master page in production site which I don’t know how to apply them to my new environment.I even tried to copy the master pages from cataloge throught SPD but it didnt work.
Any assistance would be greatly appreciatedHI Shahin,please try to access the site by below and let me know the result.please check the below link that gives more idea on the issue
_/_layouts/settings.aspx
/_layouts/viewlsts.aspx
/default.aspx
http://expertsharepoint.blogspot.de/2014/01/sharepoint-default-page-not-loading-by.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
File not found error after restore the sitecollection
Hi,
I backed up a MOSS sitecollection using "stsadm -o backup" and then restored the same file in the other machine/server. No problems while creating backup and doing restores . But after restore is successfull and try to open the site ..it is giving me
an error "File not found".Any idea?Hey Anikota,
That's usually caused by a Master Page url error. Open the site in SPD and then open the default.aspx page. If you see an error regarding the Master Page in the design view then go to the code view and manually correct the Maste Page URL.
I hope that helps!
Tom Molskow SharePoint Architect - If I solved the issue please propose my reply as the answer - Thanks! -
Hello,
We have a web application that reads in a .ini file. This works great. But, when we have to restart tomcat (for example after the database has been restarted) sometimes tomcat throws a file not found exception for that file. The only way to get rid of that exception is removing the deployed diurectory of the web application and start tomcat again so it deploys the the application again. The .ini file doesn't leave its place and is always there.
Kind regards,
MartijnHi,
MPRyan1173 wrote:
Wouldn't it have timeout reset with a server restart and computer restart?
yes, Application scope resets on coldfusion server or computer restart. -
After System Copy warning file not found
Hi experts,
I got warning in my db2diag.log after performing system copy. My current SID is Q01 and previous one is P01.
2010-08-05-15.01.07.680835+420 E719728A497 LEVEL: Warning (OS)
PID : 1703936 TID : 1 PROC : R3trans
INSTANCE: db2q01 NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloqualifydir, probe:30
MESSAGE : ZRC=0x860F000A=-2045837302=SQLO_FNEX "File not found."
DIA8411C A file "" could not be found.
CALLED : OS, -, unspecified_system_function
OSERR : ENOENT (2) "No such file or directory"
DATA #1 : File name, 15 bytes
/db2/P01/db2p01
Somehow after performing tp, R3trans. Db2diag.log show warning in accessing old path SID /db2/P01/db2p01.
I know it just warning but I wondering if this warning could lead to another error.
Any input will be appreciated.
Many thanks,
Aswin
Edited by: aswin cahyadi on Aug 5, 2010 10:14 AMHello Aswin,
As it seems to be the R3trans process that is linked to the warning message, please check the path definitions in your transport profiles. Check the directory, transport tool etc in STMS. Checck for any mention of the old sid.
Regards,
Paul -
Attempting to log in and after about 1 minute of trying to access Acrobat, I get an error "File Not Found (404)
Hi trouble logging in,
I checked your account and everything looks fine there. What happens when you log in directly to https://cloud.acrobat.com?
Best,
Sara -
Cs4 ai after yosemite upgrade could not find a plug-in to read linked psd file
cs4 ai after yosemite upgrade could not find a plug-in to read linked psd file
need to revise a client's file and can not access links!
any hope?!Not that I know. It's a compatibility issue and so far I haven't seen a fix.
Mylenium -
Cisco NCS Prime upgrade error : "% Manifest file not found in the bundle"
Hello ,
I am currently trying to upgrade my NCS software from 1.0.1.4 to 1.1.1.24 using the upgrade bundle .
Running the upgrade procedure i receive the following error message :
|---------------------------------------------------------------------------------------------------------------------------|
CPNCSSRV/admin# application upgrade NCS-upgrade-bundle-1.1.1.24.tar.gz ncs-ftp-repo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
|---------------------------------------------------------------------------------------------------------------------------|
Just to make it clear :
1. the .tar file isn't corrupted
2. there are no typo's
3. the repository is fine
Any ideas would be appriciated .
Thanks ,Hi,
In case anyone encountered the same problem, here is how you solve it:
1- Login into shell by typing "shell command" from NCS enable mode.
2- Copy the installation zip file to local disk directory:
cp /source-path/name/installation-file-name.zip /localdisk
3- Browse to localdisk directory which exists in the root directory and unzip the zip installation file:
[LMS/root-ade localdisk]# unzip installation-file-name.zip
4- Exit shell by typing "Exit"
5- At this step, if you type the "dir" command, the installation file "NCS-upgrade-bundle-1.1.1.24.tar.gz" should appear.
6- In "conf t" mode, create a new repository
repository myrepo
url disk:/
7- application upgrade NCS-upgrade-bundle-1.1.1.24.tar.gz myrepo
Please rate if you find helpful.
Thanks.
Moath Rawashdeh -
ISE upgrade failing with "% Manifest file not found in the bundle"
Hello
I am trying to upgrade a brand new ISE 3395 from 1.0.3.337 to 1.0.4 (latest). It keeps failing with
% Manifest file not found in the bundle
Here is the output:
company-ise-01/admin# application upgrade ise-appbundle-1.0.4.573.i386.tar.gpg ftp
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
fusd-ise-01/admin# sh application version ise
Cisco Identity Services Engine
Version : 1.0.3.377
Build Date : Fri May 6 19:30:37 2011
Install Date : Wed Oct 12 22:18:26 2011
I can't find anything about this for ISE, although there are a lot of topics for the same error for ACS. Thanks in advance.
SaroSame problem with 1.1.2 and 1.1.1 patch 5:
ISEcdemo/admin# sh ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.4.018
ADE-OS System Architecture: i386
Copyright (c) 2005-2011 by Cisco Systems, Inc.
All rights reserved.
Hostname: ISEcdemo
Version information of installed applications
Cisco Identity Services Engine
Version : 1.1.1.268
Build Date : Mon Jun 25 05:49:23 2012
Install Date : Wed Sep 12 09:12:53 2012
Cisco Identity Services Engine Patch
Version : 1
Install Date : Wed Sep 12 10:01:22 2012
Cisco Identity Services Engine Patch
Version : 2
Install Date : Wed Sep 12 13:10:36 2012
Cisco Identity Services Engine Patch
Version : 3
Install Date : Tue Nov 27 12:33:19 2012
Cisco Identity Services Engine Patch
Version : 4
Install Date : Tue Nov 27 12:52:50 2012
ISEcdemo/admin# patch install ise-patchbundle-1.1.1.268-5-68046.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
ISEcdemo/admin#
ISEcdemo/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
Can someone verify the downloaded file details? They are different from cisco.com values:
-bash-4.1$ /usr/bin/md5sum.exe /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
2aa9b75ef5d7c1662a1a51844f178b77 */cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-bash-4.1$ /usr/bin/ls -lAp /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-rwx------+ 1 Administrators Domain Users 1583851520 Nov 29 00:14 /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
Maybe you are looking for
-
As the title states my "Documents" folder crashes and when I try to attach documents to emails the browsers also crash. Here is my crash report Process: Finder [1046] Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder Iden
-
Change background of the text in a TextBox
(JavaFX 1.3) How can one change the background (color, gradient, whatever) of the text in a TextBox without affecting any of the other display (Skin) attributes for the TextBox? A related question is: How can I programmatically determine the backgrou
-
Everyone has the same problems. My iPod has been plugged in properly, I have followed all the support suggestions but nothing works. HELP PLEASE!
-
AR Down Payment Invoice - Freight field needed
Hi, I have various freight options defined in Admin>Setup>General>Freight. When I create an AR Invoice there is a Freight field in the General area near the Total field, here I can click the orange arrow and select the appropriate freight option from
-
GFX card HELP!!!
I'm using OSX 10.4.6 on a G4 Dual 500mhz agp machine. Was given a Radeon9800pro card but the machine doesn't like it. I've got FCP Pro 5 - but obviously it doesn't like the piddly ATI card that is in the machine. Does anyone know which, if any of the