After updating to ios 7.0.6 i keep getting an error message saying "this cable or accessory is not certified and will not work reliably with this iphone" every two minutes and its annoying
What is up with this error message after updating saying our cables are not reliable?
Thank you for this suggestion, but the message continues to display every couple of minutes. (e.g. "This cable or accessory is not certified and may not work reliably with this iPhone.)
Not only is it annoying and concerning...this is draining my battery, as the iPhone keeps waking up to display the message over and over. Like "MartinLegodi" above, I also have no cable or accessory plugged in and only use Apple cable and products when I do.
It's a disconcerting mystery.
Similar Messages
-
I'm trying to update to iOS 5.1 but I keep getting an error message saying download failed
I'm trying to update to iOS 5.1 but I keep getting an error message saying download failed
I'm not sure this will help but you might take a look at this article.
http://www.macworld.com/article/1165828/cure_for_an_incomplete_ios_update.html -
I am trying to update my Itunes software on a Windows XP system and keep getting an error message saying the update can't locate "itunes.msi" where is that file located?
thanks, JudyThe servers are getting slammed by millions of people wanting to upgrade.. just give it some time, and soon enough you'll have your upgrade.
-
after updating ADE to version 2.0 I am getting the error message 'code E_AUTH_NOT_READY' when trying to authorize my computer (Adobe Id is correct, password I have refreshed, but ..) what to do?
Running ADE on WinXP with recent SP
===> use CTRL-SHIFT-D in ADE to de-authorize and then re-authorize vial Help-Menuyes, I agree with what you say: the note '==> ...' is the solution to
my problem, found it after some time in another thread
regards
Von: sjpt <[email protected]>
An: zwergenerv <[email protected]>
Betreff: after updating ADE to version 2.0 I
am getting the error message 'code E_AUTH_NOT_READY'
Datum: Mon, 23 Sep 2013 10:59:41 +0200
RE: AFTER UPDATING ADE TO VERSION 2.0 I AM GETTING THE ERROR MESSAGE
'CODE E_AUTH_NOT_READY'
created by sjpt in Adobe Digital Editions - View the full
discussion -
I am trying to update my iPod touches and keep getting an error message saying iTunes could not back up my iPod because a session could not be started. I have followed all trouble shooting advice found on the apple website, unplugged and replugged the device, restarted my computer, etc. Any suggestions would be much appreciated. Thanks
I have the same issue, except I can't even sync.
-
I am trying to update itunes software to 10.5 but I get an error message saying to try manually installing, HELP!!!
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..
If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation -
I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?
try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2. I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message. This only started happening yesterday. Anyone else having this problem? Thanks.
I am having the same problem and took the following steps to mitigate it to no avail.
1. I deleted the Facebook app on the phone and turned off Facebook in the iPhone's system-wide settings.
2. I re-enabled Facebook in the iPhone's system-wide settings and reinstalled the Facebook app and logged in again. It worked. For about an hour.
3. I completely restored the phone to a previous backup (before the problems started) and reenabled Facebook .... reinstalled the app.... and now it works intermittenly. But it hasn't worked in about 12 hours now (just tried a few minutes ago).
Please advise. -
I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks
sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone. -
I am trying to change my Apple ID. Try to do this I keep getting an error message saying ‘This email address is designated as your rescue email address and cannot be used as your Apple ID or Primary email address. Please choose another.’ The email address that I want to use did use to be my recovery email but I have changed it, so that address is no lonegr associated with my account. I do not understand why I cannot use it as my Apple ID now. Can anyone help?
Contact iTunes customer support for assistance.
-
I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks
If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.
-
Why am I getting an error message saying my files ( that I created in 5.5 ) can not be opened because they are created in CS6? Says I have to open in 6 and back save to 4.
Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium -
I keep getting an error message that I have an invalid security code when trying to make purchased in itunes. But my security code and billing info are valid. How do I rectify this problem?
Did you ever get an answer to this? Im having same issue now! So frustrating!
Maybe you are looking for
-
Itunes wont open like at all, any idea with whats wrong with it?
my itunes is not opening its been like this for a few weeks you could just sit there and keep clicking it but it wont open, and i have no idea if its itunes or my laptop thats causing this problem. sigh. anyone know anything about this kind of thing
-
Reset Cleared Doc - Balance of the line item is not zero" Message no. F5136
I have this error : Balance of the line item is not zero" Message no. F5136 This error arise when we tried to reset cleared document dated June 6,2007 during data migration from Legacy system to SAP. We wanted to reset this cleared document because i
-
No connection left in WebLogic database pool
Hi, We have a J2EE business web application that runs in WebLogic. We noticed in application log files errors messages that seems like "No resource available in db pool", it means all the connection objects (to Oracle database) are used. Then the ap
-
JVM 1.4 and Windows XP!!!!
Listen, Sun doesn't know exactly what they are doing. I installed the JDK 1.4.x on my machine b/c I need to run this program for my Advanced Databases course. I didn't install the JDK by choice. Now when I goto a website that has a Java applet on it,
-
Hi, I have an employee that left on bad terms. I have an excel file that's password protected. How can I recover the password? Thanks