After upgrading to itunes 7.3.2 system sound does not work

I recently upgraded my itunes to 7.3.2 and the sound worked for a short time. it then began to cut on and off until ceasing to work completely after a day or so. I have run diagnostics and my computer can produce sound, but not in any programs or any of the system sounds. i reinstalled windows xp and the sound worked, but when i installed itunes again the sound once again stopped completely. i have checked all the drivers, codecs, hardware etc. and they seem to be in order. what is going on?

I really struggled with this one and my IT people couldn't help. They suggested that I add my secure corporate website to the Java Exceptions Sites, and use the Java client, but that didn't work. I tried the CITRIX Native CLient (ICA Client) and that didn't work either. So, I searched my Mac for all of the instances of CitrixICAClient, or anything else with ICA in it. I then deleted all of those files, shut down Safari, rebooted my computer and tried again to log into my corporate site using the Native Client conenction option. I remembered from years ago, that the first time you try to connect using the native client, that Citrix plugin is downloaded. THat's exactly what happened and I haven't had any more problems. So apparently, you have to clean up a little adn make sure that any "old" citrix products are removed.

Similar Messages

After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out

After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out. There is no function at all.

Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo. It was suppose to show you how much data you use to help keep you within your limits. If you have downloaded this, go through your settings and delete it and it will fix the problem. At least it did for me. I can now send photo's to non Iphone users via text no problem.

After upgrading to mavericks my epson scanner v 600 does not work

After upgrading to Mavericks my scanner V600 epson does not work, I keep getting a message to re-install the software, but even then is does not work

I'm having the same issue. The scanning software doesn't launch, the scanner appears in system preferences after a few unplugs and plugins, and software update doesn't give me the recommended ICA update.
Also the Epson scan utilities aren't updated either and will be "released soon" according to here:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 139863&prodoid=63084673&infoType=Downloads&detected=yes&platform=OSF_M_X9
They recommend to use image capture (which is a joke) in the mean time or you could buy vuescan but thats not much better for some things.

After upgrade to Yosemite, drag and drop for files does not work, destination folder crashes.

After upgrading to Yosemite, dragging and dropping files from one location to the destination folder, causes the destination folder crash. However, copying the file and then moving it works fine.
I'm not sure where to report bugs, but I figured this would be the best option

http://www.apple.com/feedback/ Feedback
https://bugreport.apple.com/ BugReporter

After upgrading from 4.6C to ECC 6.0 templates not working in smartform

Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
Abhishek

Hi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran

After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

Interesting bug. I'm cautiously optimistic this will get rid of the weekly annoyance. The difference is that I bought my laptop back in Feb 2015, so it came with Yosemite. I think the issue may have appeared soon after an OS update not long after I got the thing, though. I was using a sudo command in the Terminal, but that is obviously not a fix.
I wonder if there is a broken .plist file that may be fixed ...?

I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

Question
I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
::Worked for me::

Systems preferences does not work

My Systems Preferences does not work, either reminders and messages... since Mavericks(10.9) Programs do not respond and Macbook air is not responding.... Help.....

Well, you are certainly correct that the fact that the "wired" machines work sure doesn't rule out a faulty router....But that's why (as part of a process of elimination troubleshooting scheme) I hooked up my old Linksys Router, and got the same results. Now...What are the odds of 2 separate routers acting the same way? Especially when both worked fine on my TIPB and even on my MBP until a few months ago. Plus, my 12 year old son can pull a wireless signal from the router on his console games (xbox360, Wii, PS3) with no problem
Believe me, my first thought was to go out and buy another router, but when I swapped routers and got the same problem, I began to look elsewhere, eventually coming here for help and knowledge.
I did the SMC reset to no avail. I'm not sure about the stuff in System Configuration....By "pull" do you mean to delete all the files in this folder? Move them to a temporary folder? Should I just deal with the folders that have "IP" in the "bundle" file name?
Any help would be greatly appreciated!
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.8) 23" Cinema Display and 8 gig on G5 Dual
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.7) 23" Cinema Display and 8 gig on G5 Dual

HT1689 My itunes store app on my iphone does not work.

My itunes store app on my iphone does not work. It flashes on, then immediately off and back to the homepage. What is the solution? Can I de/re-install? I'm not sure how to do that since no "X" shows up in the top right corner anymore....

Hi mixterart,
Thanks for using Apple Support Communities. If you're not able to access the iTunes Store app try restarting/resetting the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Also, in case it is helpful, the new way to close apps is explained here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
- Ari

Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

My iTouch will not show movies, but they are showing on my iTunes. When I try and play them through my iTunes it freezes on me and does not work.

My iTouch will not show movies, but they are showing on my iTunes. When I try and play them through my iTunes it freezes on me and does not work. This problem only occurs whenever I am using my netbook. It doesn't happen when I use a different computer. I tried uninstalling and reinstalling itunes and am not sure what else to do from here.

You may have transferred all your songs, but your iPad is seeing the library as a different entity.
The following article(s) may help you.
Moving your iTunes library to a new computer

After upgrading to maverick my epson WF-2540 scanner will not work. There are no upgrades showing so what do I do?

After I upgraded to Maverick my Epson WF-2504 scanner will not work. There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download. It tells me to go to "software update" ??? Any suggestions?

Thanks Arthur,
I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here. If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope.

After upgrading to 10.9 Server 3 XMPP server does not accept account with domain instead of FQDN

Hi,
I've had this issue before when upgrading to 10.8 from 10.7. The issue is that my previous working jabber ID ([email protected]) stops working and I can only login to the XMPP server using [email protected] In previuos upgrades, all I had to do to fix the issue was to re-add the domain witrh the serveradmin tool, adding it to the jabber:hostsCommaDelimitedString.
#serveradmin settings jabber:hostsCommaDelimitedString="host.domain.com,domain.com"
In 10.9 this does not work. Both host and domain entries are already in the config but I still can only login when changing my JID to be [email protected]
Any hints?
Regard,
//Staffan

Solved it myself! It seems like the #serveradmin script for modifying / adding the domain aliases to the ejabberd server does not work correctly. After looking through the different sm_.xml files created when adding a domain the script does not modify the <local><id> that the server uses to identify the JID with.
After manually modifying that id to match my domain, and restarting the ejabberd server, it works fine again!
It seems like when adding or modifying the jabber:hostsCommaDelimitedString="" the server default hostname is always inserted into the <local><id>.
//Staffan

After upgrade to 10.4 thumbdrives/cdrom/ethernet port do not work

so after upgrading a powerbook from 10.2 to 10.4 thumbdrives don't automatically mount and cdroms don't show either..
I can go through disk utility and mount the thumbdrive manually .. but then when I take it out and put it back in it does not work ..
in the finder menu preferences .. i have select to show all items in on the desktop ..
is this some kind of library or permissions issue
powerbook g4 Mac OS X (10.4)

I tried this after a nudge from Carolyn Samit.
It was a bit trickier than that: I had to delete the current icon in the Dock and then move the Address Book app OUT of the Applications Folder and then it opened. Then I put it back and all is well.
I have since discovered all sorts of "gray" .apps (like PhotoBooth.app) that won't open through the Applications folder. But it will open from the icon in the dock. Hmmmm. Is this a Library thing?
Thank you, Carolyn, for getting my Address Book "back" !

Sound does not work after sleep

I'm really tired of this problem. Have a MBP Retina running the most current OS 10.8.4. Every few days or so when I wake the system (after having lid closed for a while, and Chrome browser running) sound does not come back on. So, if I am using youtube I can't hear anything. Only solution I've found is to restart the computer, which of course I don't want to do with browser tabs open, etc. etc.
Isn't there a simple solution to this, before Apple finally figures out what causes this glitch?

Finder
Close all windows and quit all applications.
Click "Go" menu in the Finder menubar.
Select Computer, t hen Macintosh HD > Library > Preferences
Open "Audio" folder.
Right click these two files and select "Move to Trash".
com.apple.audio.DevicesSettings.plist
com.apple.audio.SystemSettings.plist
Close the windows. Restart the computer.

After upgrading to itunes 7.3.2 system sound does not work

Similar Messages

Maybe you are looking for