After upgrading to Lion OS 10.7.5 takes 10 seconds or more to access NAS folders and files

I've upgraded my customers IMacs to Lion OS and whenever they try to access folders on the Buffalo NAS terastation it takes about 10 seconds for the folders to populate with the files. It will open right away but will look blank. If I click get info during this time it says "fetching". I'm assuming it has something to do with the SMB change with lion but don't know how to fix it. I called Buffalo and they said it must be an apple issue. I called apple and they were of no help. THe tech support person asked me to reset my computer and leave it powered of for 30 seconds......ugh. Then I asked to speak to someone higher and we got cut off.
The Buffalo NAS terastation has SCSI drives but they are mounted to an HP Server. So the SMB connection is to the HP Server running server 2003. Any help would be greatly appreciated.

Any luck getting the info on SMBX parameters like OPLOCKS ? This is apparently causing an issue with Autodesk Revit. I am resorting to installing SMBUP.
There is an article that describes this method for altering the Lion smbd configuration parameters for honoring ACLs:
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.smb.server AclsEnabled -bool NO
from this article
http://support.apple.com/kb/TS4149
and this:
http://www.stanford.edu/group/macosxsig/blog/2011/08/enable-logging-with-107-smb x-w.html

Similar Messages

After upgrading to the latest version of firefox. I can no longer access the internet and all traces of Mozilla Firefox are gone from my computer. I have no access to the internet, my home page or my e mails. What can be done??

I have been using firefox for years. I downloaded the latest version and at the conclusion of the down load I was refussed access to the internet. Something about Proxy???? I checked my firewalls and security and they said that mozilla was allowed but everytime I attempt to gain access I am refused. I cant access the internet and I cant download another program to access the internet. I uninstalled Firefox and attempted to reinstall but after uninstalling Firefox I have no means to reinstall because there are no traces of it on my computer and I no longer have access to the internet. What do I do? I cant access my e mails, stored messages, favorites etc etc.

No. After I select "Choose" the dialog box expands to provide only three choices. This is a new bug. I have only seen it in the past week or so, but it is maddening. I have observed that, while the Mozilla Foundation focuses on trivialities like which search engine should be the default, the Firefox application becomes buggier and buggier. Most of my family has switched to Chrome, and I will be following shortly. Firefox used to be a great program. Not any more. Getting assistance with a problem has also become very difficult.

Problem with colors after upgrading to Lion

After upgrading to Lion, I could no longer distinguish between very light greys (e.g., #f8f8f8) and white (#ffffff) on my laptop monitor. The difference is readily apparent on many websites.
If I plug my laptop into an external monitor, the problem goes away, and stays away even AFTER unplugging it.
Neither recalibrating the color profile nor rebooting have any effect.
Any ideas?

iPhoto is not part of Lion. It comes with a Mac. So, the version you own is the one that came with your Mac. If you want the newest version, you'll have to purchase it from the App Store.

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.

It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

After upgrading to Lion, the Finder will increase the virtual memory while using external HD

after upgrading to Lion, the Finder will increase the "virtual memory size" while using external HD. I check it using Activity Monitor and found that "Finder" wll increase the "Virtual Memory Size" and "Private Memory Size". and then after a while. the system told me my HD is full and hanging there.
My External HD is 1TB. and I have installed new version Paragon NTFS for Mac V.9.01. I am not sure it is related or not.
but I attached my external HD. the "Finder" will start to increase the "Virtual Memory Size".
please help out this case and solve this issue.
thank you !!!

The one has nothing to do with the other. Virtual memory size and Private memory size are used by developers to analyze their software. it has nothing to do with anything related to the user.

I can't hear sound after upgrading to lion

I have this little annoying problem with my iMac after upgrading to Lion OSX. After waking up my iMac I can't hear any sound from internal speakers, ie: only video on Youtube, but no sound, but whilst pressing volume up/down button I can hear beep. When it happens So I have to restart system everytime it happens. Anyone any ideas or maybe someone out there has the same problem?

I'he double checked everything, only 1 output device (internal speakers). As I said before, it is weird because I can play iTunes and can hear "beep", but neither youtube sound, nor game sound or internet radio seems to be working, no sound whatsoever. But this time system didn't go to sleep, it has just happened suddenly.... Restart again then!

After upgrading to Lion, wifi seems to be much slower, is this caused by lion?

Hello All,
After upgrading to Lion, my MMA wifi seems to work much slower than before, and also the start up seems to be slower too. Is that caused by upgrading to Lion? Please help

Give it a few days and a dozen or so restarts.
The software may be updating Spotlight indexing and a few other "housekeeping" tasks.
My upgrade on a 2010 Air resulted in a slowdown at first, but then began to return to normal. At first, the boot time doubled, but within a couple of days, it was back to a 12 second boot.

After upgrading to lion Time Capsule is solid yellow

Hi
After upgrading to lion I am experiencing a lot of problems with time caspule
1. backup fail: it starts and than fails (error message and yellow warning triangle)
2. unable to connect to TC disk, neither from airport utility, nor from Finder
3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
After a lot of reboot, reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
now backup seems to work and I can browse files in Time Machine
BUT
Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
Can somebody help me.
This all happened after Lion installation. Not a problem before
Franco

Hi William
The disk is the internal Time Capsule Disk. It's a 1Tb model.
My iMac is localized in Italian
So I write here the Italian message and a possible translation
The first error message I get opening Airport Utility is:
Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
(AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
If I press on "Continue" I enter a page that says
"Problema 1 di 1: Il disco Time Capsule non funziona"
(Problem 1 of 1: The Time Capsule Disk doesn't work)
"Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
(There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
While if I go to the manual settings and I select the disk,
on the disk data info I have
Stato S.M.A.R.T.: Non funziona
(S.M.A.R.T status: Not working)
As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?) and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
(I can agree on that now, but I was surprised to hear that from them )
Thank you very much for any help.
I hope this info helps
Franco Andrea

After upgrading to Lion Time Capsule solid yellow

Hi
After upgrading to lion I am experiencing a lot of problems with time caspule
1. backup fail: it starts and than fails (error message and yellow warning triangle)
2. unable to connect to TC disk, neither from airport utility, nor from Finder
3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
After a lot of reboot, reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
now backup seems to work and I can browse files in Time Machine
BUT
Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
Can somebody help me.
This all happened after Lion installation. Not a problem before
Franco

Hi William
The disk is the internal Time Capsule Disk. It's a 1Tb model.
My iMac is localized in Italian
So I write here the Italian message and a possible translation
The first error message I get opening Airport Utility is:
Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
(AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
If I press on "Continue" I enter a page that says
"Problema 1 di 1: Il disco Time Capsule non funziona"
(Problem 1 of 1: The Time Capsule Disk doesn't work)
"Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
(There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
While if I go to the manual settings and I select the disk,
on the disk data info I have
Stato S.M.A.R.T.: Non funziona
(S.M.A.R.T status: Not working)
As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?) and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
(I can agree on that now, but I was surprised to hear that from them )
Thank you very much for any help.
I hope this info helps
Franco Andrea

After upgrading to Lion, FaceTime does not give me a login screen. Help!

After upgrading to Lion, I tried to use FaceTime for the first time. The login screen never launches. What can I do to get a login screen?

update: It seems like the XCode update did interfere with itunes. I reran the XCode install this time with itunes not running. This seems to update all necessary drivers and Library items correctly.
After this IPad and IPod touch were working fine again.

After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version. Can I retrieve that icon and thus that facility?

After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version. Can I retrieve that icon and thus that facility?

Unfortunately not. Lion has made many adjustments to the previous system. Try opening your pdfs in keynote.

After upgrading to lion my web server won't run

after upgrading to lion my web server won't run

From System Prefs clicking on Web Shareing wont start.
From the terminal attempting to run httpd gives me:
iBookWiz:~ steve$ sudo httpd
httpd: Syntax error on line 117 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_fastcgi.so into server: dlopen(/usr/libexec/apache2/mod_fastcgi.so, 10): image not found

After upgrading to lion 10.7 I can no longer use my canoscan 9950f, why?

After upgrading to lion 10.7 my canoscan 9950f scanner is no longer recognized. Have I lost thye use of this scanner by going to 10.7?

Not likely. Make sure the scanner is still available in System Preferences > Print & Scan. You might have to delete the old scanner and add it again if your computer cannot "find" it.
Before you do that, and while you are in Print & Scan, see if you can get it to scan by selecting the Scan tab.
In Lion, all scanning functions have been relegated to Preview, the Print & Scan preference pane, and Image Capture.

After upgrading to lion starting up is taking much more time ??

After upgrading to lion starting up is taking much more time is there any solution to this ?
i do all things about cleaning disk permission or editing .

Have you check what is being started at the same time?
Lion will start more applications then were being started in the past.
Allan

After upgrading to Lion, Printer error messages.

After upgrading to Lion, I suddenly see the following error message whenever I print to my HP printer: "You can't open the application PrinterProxy because PowerPC applications are no longer supported." Now, my document will print, but I can no longer adjust settings. Help??

PowerPC applications are no longer supported under Lion. If you can't find Lion drivers on HP's website, you either need to go back to Snow Leopard or start looking for a newer, compatible printer.

After upgrading to Lion OS 10.7.5 takes 10 seconds or more to access NAS folders and files

Similar Messages

Maybe you are looking for