After upgrading to OS X Mavericks, my HL-2030 does not print, although I downloaded the driver

I can add the printer and the status is 'inactive'. However, the status monitor is red (offline). And the failure report says 'probably wrong adress for the printer'.
I still can print with another notebook (Microsoft Windeows 7 Starter, 32 bit).
It worked before with an older MacBook Pro. But since I got a new iMac one month ago (and the upgrate to Mavericks last week) the printer is not responding.

You could try deleting the printer and the /Library/Printers/Brother folder and reinstalling the update. Or download the drivers frm here:
http://support.apple.com/kb/DL894

Similar Messages

  • After upgrading FireFox to V 26.0 Real Player does not load. I downloaded Real P but it will not execue. Says "side by side config is incorrect. Please see th

    Videos don't load, just black screen. Followed instructions and download Real Player. Real Player does not execute, provides message "The application failed to start because its side-by-side configuration is incorrect. Please see application event log or use the command-line sxtrace.exe tool for more detail."
    Can you please tell me where to go from here?

    Hi, its microsoft issue, please go-through the below link
    *http://support.microsoft.com/kb/2525435
    *http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/error-the-application-has-failed-to-start-because/df019c0d-746e-42d0-ad68-465e18e3f3ef

  • After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out

    After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out.  There is no function at all.

    Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo.  It was suppose to show you how much data you use to help keep you within your limits.  If you have downloaded this, go through your settings and delete it and it will fix the problem.  At least it did for me.  I can now send photo's to non Iphone users via text no problem.

  • After upgrade to Yosemite, drag and drop for files does not work, destination folder crashes.

    After upgrading to Yosemite, dragging and dropping files from one location to the destination folder, causes the destination folder crash. However, copying the file and then moving it works fine.
    I'm not sure where to report bugs, but I figured this would be the best option

    http://www.apple.com/feedback/  Feedback
    https://bugreport.apple.com/  BugReporter

  • After upgrading to 10.9 Server 3 XMPP server does not accept account with domain instead of FQDN

    Hi,
    I've had this issue before when upgrading to 10.8 from 10.7. The issue is that my previous working jabber ID ([email protected]) stops working and I can only login to the XMPP server using [email protected] In previuos upgrades, all I had to do to fix the issue was to re-add the domain witrh the serveradmin tool, adding it to the jabber:hostsCommaDelimitedString.
    #serveradmin settings jabber:hostsCommaDelimitedString="host.domain.com,domain.com"
    In 10.9 this does not work. Both host and domain entries are already in the config but I still can only login when changing my JID to be [email protected]
    Any hints?
    Regard,
    //Staffan

    Solved it myself! It seems like the #serveradmin script for modifying / adding the domain aliases to the ejabberd server does not work correctly. After looking through the different sm_.xml files created when adding a domain the script does not modify the <local><id> that the server uses to identify the JID with.
    After manually modifying that id to match my domain, and restarting the ejabberd server, it works fine again!
    It seems like when adding or modifying the jabber:hostsCommaDelimitedString="" the server default hostname is always inserted into the <local><id>.
    //Staffan

  • After upgrading to Lion from Snow Leopard, mail server does not receive incoming email

    After upgrading my server last night [2011.07.20] from Snow Leopard to Lion, my mail server settings went belly up.  After toying around with the server, its certificates and what-not, I was able to get it running, but it is no longer receiving any emails [neither internally nor from Gmail, Yahoo, etc.].
    I can send emails via SMTP just fine [using SSL] to external email accounts [and it doesn't complain when I address an email to an internal email account, but I can't verify that it's sending it to the internal email account because it won't receive!].
    The Connection Doctor says that it is indeed connecting properly to the server [incoming = IMAP, outgoing = SMTP], so there is communication between Mail 5.0 [and also Thunderbird as well] and the mail server.  The problem appears to be the mail server not receiving any emails - from internal or external addresses.
    Anyone else having this problem or know of a fix for it?
    Thanks!

    Did you find a solution to this issue?  My mail server is doing the same thing.  I've tried six migrations now, and have a couple of tickets open, but they all have issues.  I have worked around all of them except the mail server problem.
    I did some more digging; the problem appears to be that on a migrated server, it leaves all of your mail store in the old location, doesn't move it, and then doesn't appear to upgrade spam-assassin properly.  The net effect is that the mail server gets the SMTP communication, tries to pass the message into spam assassin, and then it goes south.
    I see errors like this littered in the logs:
    Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed:
    Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed: No such file or directory
    Do you see anything similar?

  • After upgrading to a new iMac 27 my iPhone does not sync with iTunes

    After having the Apple Store migrate all my data and programs from an older iMac to a new iMac 27" my iPhone does not sync.  After connecting the phone it begins and goes to about steps 3 or 4 and then the "apple" appears indicating it is finished - however new pictures have not been transferred to the phone and updates for apps have not happened.  Any ideas?

    Your music/movies, etc will only be where you put them.
    Copy everything fom your old computer or your backup copy of your old computer to your new one

  • After upgrading to itunes 7.3.2 system sound does not work

    I recently upgraded my itunes to 7.3.2 and the sound worked for a short time. it then began to cut on and off until ceasing to work completely after a day or so. I have run diagnostics and my computer can produce sound, but not in any programs or any of the system sounds. i reinstalled windows xp and the sound worked, but when i installed itunes again the sound once again stopped completely. i have checked all the drivers, codecs, hardware etc. and they seem to be in order. what is going on?

    I really struggled with this one and my IT people couldn't help.  They suggested that I add my secure corporate website to the Java Exceptions Sites, and use the Java client, but that didn't work.  I tried the CITRIX Native CLient (ICA Client) and that didn't work either.  So, I searched my Mac for all of the instances of CitrixICAClient, or anything else with ICA in it.  I then deleted all of those files, shut down Safari, rebooted my computer and tried again to log into my corporate site using the Native Client conenction option.  I remembered from years ago, that the first time you try to connect using the native client, that Citrix plugin is downloaded.  THat's exactly what happened and I haven't had any more problems.  So apparently, you have to clean up a little adn make sure that any "old" citrix products are removed.

  • After effects CC does not load since I downloaded the new Apple OS X (Maverick)

    Can anyone help me over-come this issue?

    Hi this might help:
    http://helpx.adobe.com/after-effects/kb/effects-launch-mac-os-109.html

  • HT201272 An episode of a season pass purchase does not show up as downloadable the day after it has aired on TV.

    Bought a season pass to "Revenge" tv show. I usually receive an email the next after the show aired on tv to say it is now ready to be downloaded. For the last episode, no email was received, and checking with the iTunes store says no downloads are available. This has happened once before and I received quick problem resolution from support staff, but this time I was just asked to check for downloads (which I said I had already done) then no further help. Any ideas?

    Perhaps the makers of Revenge have not released to Apple yet.

  • After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

    After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

  • After upgrading to OS X Mavericks syslogd needs lot of memory and cpu, system is very slow

    After upgrading to OS X Mavericks the system is very slow. securityd and syslogd are using 50% of cpu and memory is also used by syslogd and kerneltask (8 GB out of 12). After rebooting the system it runs very well, a view days later (without reboot, only hibernating) the situation is the same.
    Looks like a problem in OS X. Any solutions?

    I haven't worked out the LDAP messages but I noticed at other times I was seeing lots of album art messages from BlackBerry desktop. I'd already uninstalled the app but it still had processes running. I followed this link to remove completely; http://apple.stackexchange.com/questions/57023/how-to-uninstall-completely-black berry-device-manager
    CPU levels have been noticeably lower ever since.

  • After upgrading to OS X Mavericks Time machine stops working

    After upgrading to OS X Mavericks Time machine stops backing up and sometimes hangs on ,,preparing,, for o days and sometimes stops inmediatly. Report says:
    Backing up to /dev/disk1s2: /Volumes/Backup/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[__NSArrayM objectAtIndex:]: index 0 beyond bounds for empty array'

    Is this a Firewire or Thunderbolt connected disk?  There are know issues with that in Mavericks.  If so try connecting the drive by USB as you continue.
    Is it a WD drive?  There appear to be issues with those drive on Mavericks.
    Time Machine Troubleshooting
    http://pondini.org/TM/Troubleshooting.html
    A4 - Full Reset of TIme Machine

  • Epson Stylus Photo T50 is idle after upgrading to OS X Mavericks, Epson Stylus Photo T50 is idle after upgrading to OS X Mavericks

    Hello,
    I have an Epson Stylus Photo T50 and after upgrading to OS X Mavericks it does work and is idle the whole time.
    I'm from Brazil and would like to know if an update comes out soon or is there another solution for my case?
    I'm waiting for aid

    You probably need an updated driver:
    Epson drivers for Mavericks:
    http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp

  • My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    Hi, I had this same problem. I have a load of work subfolders and was showing the message header but no content. I think it lost the link to the original messages.
    There may be a simpler way but I fixed it by going to the mail folders in finder. I took the following steps:
    Go to user library (hold down the alt key whilst clicking the Go menu in finder to access user library)
    Go to user/Library/Mail/V2/Mailboxes. You should be able to see your mailboxes and your original messages (ending .emlx) after clicking down the hierachy in each mailbox. For some reason mail added a "-2" onto the end of each mailbox which I think has caused the problem.
    Copy each required mailbox (.mbox) onto desktop. I removed the "-2" at this stage to clean things up.
    In Mail, choose File/Import Mailboxes....
    Import data from: Apple Mail. Click continue, navigate to desktop and choose the relevant .mbox folders. Click Choose.
    It should then import the mail to a new folder called import in mail. You can then rename that folder or move the subfolders out.
    I moved the .mbox folders on my desktop to my documents folder as a backup just in case. I then deleted the problem mailboxes from the finders mailboxes folder.
    Problem solved - for me anyway!!
    Hope this helps.

Maybe you are looking for