After upgrading to Safari 6.0 (running 10.7.4), when launching Safari, Mail also launches.  How do I disable Mail from launching simultaneously?

Whenever I try to open only Safari, Mail automatically launches.  I cannot seem to figure out how to stop it from doing this.  I am certain that this is not about programs launching at login.  It only began after I did the Safari 6.0 update.  I cannot find anything in preferences on how to stop Mail from launching. 

Read this whole message before doing anything.
Back up all data if you haven’t already done so. Before proceeding, you must be sure you can restore your system to the state it’s in now.
Quit Safari if it’s running. Then select  ▹ Force Quit... from the menu bar. A small window will open with a list of running applications. Safari may appear in that list, even though you quit it. If so, select it and press return. Close the window.
Step 1
In the Finder, press the key combination shift-command-A to open the Applications folder. Select the Safari icon in that folder and press the key combination command-I to open the Info window. There’s a checkbox in the Info window labeled Open in 32-bit mode. Uncheck it, if checked. Close the Info window and the Applications folder.
Hold down the option key and select Go ▹ Library from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
Caches/com.apple.Safari
Caches/com.apple.WebKit.PluginProcess
Caches/Metadata/Safari
Preferences/com.apple.WebKit.PluginHost.plist
Preferences/com.apple.WebKit.PluginProcess.plist
Saved Application State/com.apple.Safari.savedState
Leave the Library folder open. Try Safari again. If it works now, stop here. Close the Library folder.
Step 2
If you still have problems, quit Safari again.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
rm -fr $TMPDIR../C/com.apple.Safari
Quit Terminal. Launch Safari and test.
Step 3
If Safari still doesn’t work right, quit, go back to the Finder and move the following items from the open Library folder to the Desktop (some may not exist):
Cookies/Cookies.binarycookies
Preferences/com.apple.Safari.LSSharedFileList.plist
Preferences/com.apple.Safari.plist
Preferences/com.apple.Safari.RSS.plist
Preferences/com.apple.WebFoundation.plist
PubSub/Database
Safari
(Note: you are not moving the Safari application. You’re moving a folder named “Safari.”)
Try again. This time Safari should perform normally, but your settings and bookmarks will be lost.
If the issue is still not resolved, quit Safari again and put all the items you moved to the Desktop back where they were, overwriting the newer ones that will have been created in their place. You don’t need to replace the files you deleted in step 1. Stop here and post again.
If Safari is now working normally (apart from the lost settings), look inside the “Safari” folder on the Desktop for a file named “Bookmarks.plist”. Select File ▹ Import Bookmarks from the Safari menu bar. Import from that file. Recreate the rest of your Safari settings. You can then delete the items you moved to the Desktop.
Note: This step will remove your Safari Extensions, if any, and their settings. If you choose to restore them, do so one at a time, testing after each step to make sure you haven’t restored the problem.
If you don’t like the results of step 3, you can undo it completely by quitting Safari and restoring the items you moved or deleted in that step from your backup, overwriting any that were created in their place.

Similar Messages

  • After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • After upgrading to Mavericks I have adobe for my pdf reader in safari.  Can someone tell me how to get back to mac pdf reader? Thank you.

    After upgrading tp Maveraicks I have adobe for my pdf reader in safari.  Can anyone tell me how to get back to apple pdf reader?  Thank you

    Remove Adobe plug ins if any.
    Macintosh HD > Library > Internet Plug-ins
    AdobePDFViewNPAPI.plugin
    AdobePDFView.plugin

  • After upgrading to snow leopard my MacBook Pro will freeze when I go to system Pref or it has been running for 40 minutes-can't shut it off properly...frustrated. What fix can I download?

    After upgrading to snow leopard my MacBook Pro will freeze when I go to system Pref or it has been running for 40 minutes-making it impossible to close app's or power off properly...so frustrated. What fix can I download?

    After upgrading to snow leopard my MacBook Pro will freeze when I go to system Pref or it has been running for 40 minutes-making it impossible to close app's or power off properly...so frustrated. What fix can I download?

  • I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

    I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes.  The drivers are up to date
    Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
    Dell Inc. Latitude E6420
    iTunes 12.0.1.26
    QuickTime 7.7.6
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 756D13C00C3583C8
    Current user is not an administrator.
    The current local date and time is 2015-01-13 14:47:35.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: SbCeCd (3.2.6.3),
    UpperFilters: GEARAspiWDM (2.2.3.0),
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Audio CD in drive.
    Failed Reading table of contents, error 4000.
    Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
    Audio CD reading failed. Error Code:   87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed failed. Error Code: 4000.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

    Hi iTunes-1,
    Welcome to the Support Communities!  The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.  
    iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
    http://support.apple.com/en-us/HT201852
    Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
    To run CD Diagnostics, follow the steps in this document.
    After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
    Here is an example of what section three might look like:
    In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
    If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
    If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
    Run CD Diagnostics again.
    Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
    Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
    Last Modified: Nov 8, 2014
    Also, you mentioned that you have been successful burning a CD with the Windows OS.  Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive.   Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
    I hope this information helps ...
    - Judy

  • Problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
    This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
    Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
    If iPhoto  is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
    http://www.apple.com/support/mac/app-store/contact/

  • After upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down then restore power to get it to function.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

  • After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

    After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • After upgrade the ipad2 to ios 5, my pages files in my ipad is missing? How can get back?

    After upgrade the ipad2 to ios 5, my pages files in my ipad is missing? How can get back?

    azwanelias wrote:
    my iphone 5s is jammed after downloading IOS 8.0.2 and now i cant use my iphone and it has the sing of itubes in RED which is wired how can i get my phone to work? and its not letting me restore on itunes of my PC
    I don't really understand your comment about "sing of tubes in RED which is wired". But if you are referring to the display of iTunes and the USB port that is an indication that you must restore your iPhone by connecting it to your computer via USB and then using iTunes on the computer to restore it.

  • After upgrading the itunes, I can not find my ipad when it connects to the PC

    After upgrading the itunes, I can not find my ipad when it connects to the PC
    Before that, I can see an botton said my ipad. And then I can click it to operate my ipad

    Try this
    Go into the control panel. Add/remove programs. Uninstall iTunes, Apple mobile device service, apple application support. Then go out and redownload and reinstall iTunes and try again.
    There seems to be a glitch with a recent update and one way to overcome it is to just start over. If that doesn't work there are more in depth things you can do.

  • After upgrading to io6 my battery runs out daily.

    After upgrade my battery doesn't even last a full day!!! Took it off the charger at 7.30 this morning, now 1pm and it has died again! Why no option to revert back to previous?
    Also, had no Apps running all day, sent two messages this morning and remainder of time was just sitting on my desk!

    Please search this forum as etiquette would dictate.  Your issue has already been explored ad nauseum.

  • HT6065 After upgrading to OS X Mavericks v 10.9.1, keep getting "safari can't verify the identity of the website" and asks to show certificate, cancel or continue.  Is anyone else having this issue?

    Hello.  Just upgraded to OS X Mavericks v 10.9.1.  Now I keep getting "safari can't verify the identity of the website" error.  I looked for other updates, but none are available. Am I doing something wrong?  Didn't do this before the upgrade, now I can't seem to log into anything through safari.

    Most websites are checked to make sure they do not contain viruses or that they are properly encrypted.  If safari cannot identify a website's ceritificate, check if other browers do the same thing (make sure they are up to date browsers), if they all say it cannot be verified, then the site was probably hijacked and you should run a full scan of your computer for viruses, unless the page was blocked by safari and redirected to something that said fraudulent webstie detected.

  • After upgrade to SP4, cann't run my app.

    hello,
    My application works very well in SP3, after upgrade to SP4, everything seems work fine.
    But there is one problem by using the <netuix:/>
    I add this in the <netuix:header/>
    <netuix:header>
    <html:table style="vertical-align: top; width: 100%;">
    <html:tr>
    <html:td align="left" style="vertical-align: top; width: 1%;" valign="top">
    <netuix:jspContent contentUri="/jsps/header.jsp"/>
    </html:td>
    <html:td align="right"
    style="vertical-align: bottom; width: 1%; font-size: 8pt;" valign="top">
    <netuix:pageflowContent contentUri="/LanguageController/Language/LanguageController.jpf"/>
    </html:td>
    </html:tr>
    </html:table>
    </netuix:header>
    This works in the SP3. In the SP4, it can display the first time, after clicing on the PageFlow (LanguageControl), the header.jsp (only includes a banner GIF) seems disappear and display another LanguageControl.
    Any idea on it ???
    Eric

    so your starting it up and its just crashing right away, yes? can you tell me what app it acutally is? as iOS6 is so new my thought would be that its probably incompatable with it at this time, im having trouble with my networks app that just will not let me log in at all!
    id suggest going to the page of the app on the app store and look to see if it says if its compatable or not? as for a error log its in usage data, which is in settings > general > about, and i think its near the bottom.

  • After upgrading to Mavericks App store only works for me when I switch over other users

    After upgrading to Mavericks, the only options that work for me on App Store are Updates and Purchases, anything else only works if I switch my user either to guest or root? Any idea?  Thx in advance. 

    Read this whole message before doing anything.
    Back up all data.
    Quit the App Store application if it’s running.  Wait at least 10 seconds before continuing.
    Step 1
    Hold down the option key and select
    Go ▹ Library
    from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
    Caches/com.apple.appstore
    Caches/com.apple.storeagent
    Caches/storeagent
    Cookies/com.apple.appstore.cookies
    Preferences/ByHost/com.apple.appstore.plist
    Preferences/ByHost/com.apple.storeagent.plist
    Preferences/com.apple.storeagent.plist
    Leave the Library folder open. Try the App Store again. If it works now, stop here. Close the Library folder.
    Step 2
    If you still have problems, quit again and wait 10 seconds. Go back to the Finder and move the following items from the open Library folder to the Desktop:
    Cookies/com.apple.appstore.plist
    Preferences/com.apple.appstore.plist
    Test. If the App Store now works, delete the files you moved to the Desktop. Otherwise, quit again. Put back the files you moved, overwriting the newer ones that may have been created in their place, and post your results.

  • After upgrading to 4.0 my settings to clear history when closing does not work

    After upgrading, per your recommendation, to 4.0 my history, cache, cookies, etc. are not being cleared when I close the browser, despite the fact that I have correctly re-adjusted my option settings. When I re-open the browser, not only has it not cleared anything, but opens not on my home page either, but on the last web page I was on! Why do properly set options for privacy work anymore?!

    Digital Persona have abandoned their fingerprint reader and it will not work in Firefox 4. For more details see https://support.mozilla.com/en-US/questions/799388

Maybe you are looking for