HT6065 After upgrading to OS X Mavericks v 10.9.1, keep getting "safari can't verify the identity of the website" and asks to show certificate, cancel or continue. Is anyone else having this issue?
Hello. Just upgraded to OS X Mavericks v 10.9.1. Now I keep getting "safari can't verify the identity of the website" error. I looked for other updates, but none are available. Am I doing something wrong? Didn't do this before the upgrade, now I can't seem to log into anything through safari.
Most websites are checked to make sure they do not contain viruses or that they are properly encrypted. If safari cannot identify a website's ceritificate, check if other browers do the same thing (make sure they are up to date browsers), if they all say it cannot be verified, then the site was probably hijacked and you should run a full scan of your computer for viruses, unless the page was blocked by safari and redirected to something that said fraudulent webstie detected.
Similar Messages
-
My clip timing and transition points won't save at desired positions, anyone else having this issue, it crashes as well.
Could you share the crash log here? Thanks!
-
I have already swapped this phone out once for a new I phone 6. First one I was having same issues with.
Now I got the new one and it was good for about a month and now its doing it to but worse. It freezes completely.
Won't let any of my text messages get through to me. All my messages disappear completely and randomly come back when they feel like it.
This time its frozen where I can't even read any texts or get any texts and when I click on the messenger app it just goes to the NEW MESSAGE and won't let me get out of this screen. Should I once again take this back? or are all the iPhone 6's bad like this?It's not the iphones, it's more likely one or more of your programs causing this issue. It's not the iPhone 6's. The possibility of you getting 2 bad iphones from different batches is extremely remote or you have the worst luck on the planet. lol If one iPhone has it, then you get a new one and the same problem comes up again, it's most likely due to an issue with a program that you keep getting back from restoring an old backup. Restore the iphone again and set up as a new iphone. Then manually import your music and your photos. Once that's done, try to use your iphone to see if everything is ok. If it works good for a few days, then try to add some of the apps. At some point, you'll end up loading the malicious app and the problem may come back. Make sure that the apps are all updated. If you still have problems, call Apple so that they can run a diagnostic report and find out which app is causing this issue. Then you can simply delete it and/or update the app. More solutions are available but that's all I will post for now.
-
Send Invitation Inactive/Not Working in Member Center. Anyone else having this issue?
When I try to invite a developer to our organization's Apple Dev Portal, the 'Send Invitation' link is inactive. I also tried the bulk invite where the button appears to be active but does not respond when clicked. Is anyone else having this issue? I submitted a bug report last week and haven't heard anything.
Hi 2themax11
Still no update from PA Networks - it is like they are in total denial that Mountain Lion exists!
The Cisco app works but only just and is very slow, i think that may be more to do with us than the use of the app. Bear in mind we used to use the Cisco service and so it is not something I had to set up from scratch but it is not something our network team are happy about as this service was buried and was not supposed to be supported any more.
I am also using a Cisco SSL webvpn for accessing our intranet etc. it is a quicker fix for a few things. Like you I am now using 2 laptops...one is an old Dell...it is horrible! -
Safari 5.1.7 keeps crashing (log points to Rapport) on my Mac OS X (10.7.4) Has anyone else having this issue with Trusteer Rapport?
Hello Mr. Jelfs,
Please note that Rapport is fully compatible with Mac OS Leopard, Snow Leopard and Lion.
We operate a 24\7, free of charge support team that will gladly answer any and all your questions and queries, and would be happy to assist with any problem reported.
We can be reached either via email to [email protected] , or by browsing to http://www.trusteer.com/support/report-problem .
Regards,
The Trusteer Technical Support team. -
Today, my iPhone calendar entries are changing from green to blue and back to green again. Anyone else having this issue?
No, never had the problem.
-
"itunes could not restore the iphone because the password was incorrect" I know for a fact im using the correct password. and it has previously worked. is anyone else having this issue.
Hi, I also get the message "itunes could not restore the iphone because the password was incorrect" though I am never prompted to enter a password anywhere! Nor was the backup password encrypted to begin with! Really strange, any pointers will be greatly appriciated!
-
Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.
I'm performing a normal "Save", not "Save As". Work flow I'm using is as follows: Select photo in Lightroom 5.7 >" Edit In" Photoshop CC 2014 > (after working on photo is PS) > Save > close PS. Photo returns to Lightroom 5.7 in a new folder rather than next to the original. Prior to purchasing the monthly plan and upgrading to PS CC 2014, I performed this same work flow using Lightroom 5.6 and Photoshop CS6 without any issues.
Just for fun... I attempted to move the edited file back into the original folder. I received a prompt that said the file already existed in the original folder, however I can't see it except the new folder that LR created. I tried several different sort orders, etc without any success.
*** Follow up: Was unable to resolve the issue using Photoshop CC 2014. Uninstalled PS CC 2014 and went back to using Photoshop CS6. Return trips from LR 5.7 to Photoshop is now performing as it should: returning edited photo back to the original folder in LR 5 and placing next to the original image.
Should anyone have a suggestion on getting Photoshop CC 2014 to do the same, I would love to be educated.
Thanks for the help, dj_paige. -
We have recently started using ID CC 2014 and recently have been having Crashing issues stating the network connection was lost. Anyone else having this issue?
I will try that.
This is a copy of the error we are getting -
When safari is in full screen mode and I move the mouse to the top of the screen to bring up the menu bar and the bookmark bar, it does nothing. Is anyone else having this issue?
ThanksI just tested that since I hardly ever use full screen mode, this was the first time since I upgraded to Mountain Lion, and it worked fine for me.
Try shutting Safari down and see if that changes anything.
If that doesn't change anything, try shutting down and then rebooting.
Allan -
I have had over 5 time out err-3259 trying to update my Ipad 2 on my imac from last night and all this morning. Anyone else having this issue? It is definitely not my internet connection etc. Right in the end at 99% this error message comes out. Help
Hi, aliahfromauckland.
If you are still experiencing issues when attempting to update your iPad, see the article below.
iTunes Store reporting error - 3259
http://support.apple.com/kb/TS2799
Hope that helps,
Jason H. -
error code keeps popping up-the itunes library file cannot be saved. there is not enough memory available. then itunes crashes? anyone else having this issue?
Yes, I'm getting the same issue
-
I'm using Big date theme but the numbers on the date is cut off on top. I'm on iphoto 11 and OS 10.8.2. anyone else having this issue??
OK try the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder. -
I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?
Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"
-
After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix? Everything seems to work fine if I connect to wireless, but if I'm not connected to it then nothing is working. My service provider says everything should be working fine, I still have the 3G symbol and full bars.
Somebody clearly hasn't read the User Guide.
Basic troubleshooting steps are retart, reset, restore from backup, restore as NEW.
If you have tried ALL of these steps and you're still having problems, then you need to bring your phone into Apple for evaluation.
Maybe you are looking for
-
Error when starting Bex analyzer
Hi All! We have a world wide BW-SEM application. In one country they get the following error message when starting Bex analyzer: <install error> Missing ActiveX component: Business Explorer Global Services Does anyone have a hint on what to do? Thank
-
How to copy a table with LONG and CLOB datatype over a dblink?
Hi All, I need to copy a table from an external database into a local one. Note that this table has both LONG and CLOB datatypes included. I have taken 2 approaches to do this: 1. Use the CREATE TABLE AS.... SQL> create table XXXX_TEST as select * fr
-
Open PO Quantity and Open PR Quantity
Dear Friends, How can we get Open PO Quantity and Open PR Quantity?. I used 2LIS_02_ITM, 2LIS_02_SCL to 0PUR_C01 Cube and 0PUR_DS03 DSO and I have done lots of R & D by using restrictions i.e. Delivery Completed indicator, I'm getting GR Qty, but not
-
Please recomend a good book to create art in Photoshop?
I want to learn to create menus and artwork in photoshop and Illustrator. I have seen many books but they tend to work with manipulating photographs. I want to create pictures and menus.... Can anyone recommend a good book (available in UK) to teach
-
Planning Unit Hierarchy - multiple owners per Entity
Hi there everyone I have the following scenario and hope you can help me out with a few ideas: I have a planning unit hierachy set up. It works well except for one thing - the fact that you can assign only one owner per entity member. The business es