After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

I got a video from iStore and it will play in iTunes but not on my iPod

One of the videos i purchased back in Feb 2006 (TV show) was wiped from the purchased list with the iTunes 7 update and no longer shows up in any of the playlists anywhere on my iPod. I can play it in iTunes on my computer, but no matter what changes I tried, it won't update it to my iPod again.
Other videos, such as smaller clips, that I purchased around the same time are still there and playable, as well as tv shows I have bought since. I still have a copy of the receipt for this video in my inbox. What can I try to do to get my iPod to recognize the file again?
iPod Video Windows XP Pro

Perhaps it is time to try performing a RESTORE on your iPod and see if that clears it up.
http://www.apple.com/support/ipod/five_rs/
Patrick

Mpg video will play in FF but not in IE

Here's the link:
http://02c11c8.netsolhost.com/melissa/index.html
I have two flash files to play sound and one video file below
them. This works in FireFox but not in IE.
Any help would be greatly appreciated.

Are these files in the proper links paths?
<script src="../../../Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
<script src="../Scripts/AC_ActiveX.js"
type="text/javascript"></script>
"Old Shoe" <[email protected]> wrote in
message
news:gh9c6d$9ed$[email protected]..
> Here's the link:
>
http://02c11c8.netsolhost.com/melissa/index.html
>
> I have two flash files to play sound and one video file
below them. This
> works
> in FireFox but not in IE.
>
> Any help would be greatly appreciated.
>

Video plays on Computer but not on Ipod

I have a video that I converted using DVD Decrypter and Videora Ipod Converter, the video works fine on my computer and off of Itunes and it transfers fine to my Ipod but when I try to play it off my Ipod it just shows a black screen and then returns me to the videos menu. I'm running a Windows XP Pro, 3 GHz with hyper threading, 512 Mb of RAM, DVD drive, CD Drive, NVIDIA FX 5200 and Sound Blaster Live 5.1. Does anyone know what Im doing wrong? Every thing else works fine, anyone know what to do?

I have a video that I converted using DVD Decrypter and Videora Ipod Converter, the video works fine on my computer and off of Itunes and it transfers fine to my Ipod but when I try to play it off my Ipod it just shows a black screen and then returns me to the videos menu.
Have managed to duplicate this problem. It appears that if you make an alias of your movie and add it to the iTunes library, iTunes is smart enough to create a "self-contained" duplicate in your designated iTunes storage area. If, on the other hand, you create a "reference" movie and add it to iTunes, then the actual reference movie (not "self-caontained") is save to the designated iTunes storage location. Further, in the latter case, there does not appear to be any error trapping for this event during either the file to library transfer or the actually sync of the iPod. In any case, attempted play of a sync'd reference movie results in the described problem.
Hope this helps... Attempted to inform Apple of the problem but their iPod Feedback area is itself in need of a proper update.

Purchased video from itunes online store will play in itunes but not ipod

It seems like this issue comes up for a lot of people. When I try to play the tv show I purchased from the itunes store on my 30gb ipod I get a grey screen, then it goes back to the menu. I've tried all the usual fixes- resetting, restoring, getting all the latest updates, etc. My video settings have "TV out" turned off as well, but that didn't help. Isn't there something else I can try? Does anyone know what the problem might be?
I also can't choose to convert the file for ipod. This solution has been offered, but seems pointless, since I got it from the itunes store. I would love to have a solution to this problem, before I vomit and crash into the floor.

I got my problem solved via the apple helpline, although it took a total of about five hours on the phone. First, I had to move up the echelons of representatives until I was actually talking to someone in America. It takes a long time for them to take you through all the trouble shooting steps and you have to explain several times that you've already tried everything.
The solution they found for me was lengthy and confusing, and I wouldn't try describing it in detail to someone else. It involved doing stuff on my computer: I had to put my video files into my "shared folder," create a new user on windows, log in under that user, plug in my ipod, and import the videos, which then worked. I don't know why or how it fixed the problem, but it's definately fixed. Before I did that stuff, they also had me restore my ipod. I would recommend calling the apple helpline, telling them you've tried all the usual fixes, and politely asking them to "elevate" your call, which means you are talking to the cream of the cream as far as representatives go. They should be able to help.
The representative told me that this problem is rare but more prolific on windows machines. So if you have windows and you're havings these problems, chances are your problem is similar to mine.

How to connect a video capture device to Satellite M30X 127

I'm going around in circles trying to find a video capture device that will function with a laptop and would be grateful for advice. By way of example, I'm now looking at the 'Canopus ADVC-110', although still looking around (but not Pinnacle, who seem to have a terrible reputation for capture items).
Problems include:
1. Main problem is - many video capture external devices require a 'line-in' to PC for good quality audio transfer. This laptop doesn't have a line in, only the mike and headphone jacks. In addition, I've also tried a few RCA pins in the 3.5mm microphone/headphones jack and they were too small. How to solve the problem of getting audio from vcr to my PC?
2. The ADVC-110 connects to the PC via Firewire (and S-video), but is a SIX-pin type. M30X is a FOUR-pin type. Are there adapters available?
3. Some capture programmes seem to require huge capacity of RAM. Is a laptop going to be suitable to do the job? (I simply want to capture old vhs tapes from vcr to PC, then burn to DVD with Nero 7 or similar).
Thanks in advance!

Hello
You are right! You must use external device for signal transfer to your notebook. I dont know where you have this info but I have good experiences with Pinnacle product. For data transfer I have used USB port.
'Canopus ADVC-110 is not known to me but I dont see any reason why this should not work well. Use delivered software for video capturing and there should not be any problem.
Only thing is that after recording the whole video material must be prepared for burning and unit need a lot of power to do this well und fast. When you buy this and want to use on right way I recommend you to expand RAM to 1GB.
Compatible memory modules for your Satellite M30x are:
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
Bye

Detecting Video Capture Devices without Installing JMF

Hi All,
I want to detect the video capture devices, without installing the JMF.
I had included the jmf (windows version) in lib path in netbeans ide. I am able to detect the audio capture device. But unable to detect the video capture devices. But if I install the JMF, I am able to detect the Video Capture devices in My system. Can anyone help me?
Thanks,
Vinoth Kumar.

YES! Please take a look at SIP Communicator project. They have all what u want.
The main idea is copy all .dll files to System or System32 (Please check files which JMF will copy to ur computer and where).
U need to have jmf.jar and sound.jar too ( maybe more) in your computer.
Your program should have DirectSoundAuto.java, JavaSoundAuto.java, JavaSoundDetector.java, JMFInit.java. Those files are in JMStudio source code. They are used to detect all capture devices and register it to JMF, but wait !!! where they will be saved? In order to save information about capture devices which are detected, you should create "jmf.properties" file in the same location with jmf.jar.Therefore, u should modify the JMFInit.java so it can check if the "jmf.properties" exists. If it's not, you have to create it.
Check SIP Communicator at Folder "media" then "device". They have modified those files I mentioned above and created some new files to SC can detect more devices.
Edited by: tamngminh on Sep 16, 2008 9:50 AM

Advice Needed for Video Capture Device

Hi,
I'm looking to buy a USB (or Firewire if they exist) video capture device that can take S-Video and composite connections. Could someone recommend me best one under $150 that is compatible with Snow Leopard? Also, and more importantly, does anyone know if it is possible to capture the signal via Quicktime Pro or Final Cut Pro rather than bundled third party software.
Thanks!

I used the predecessor to the Canopus ADVC55 to load VHS tapes into a mac. As I recall I brought the firewire signal into iMovie (could have been Final Cut Pro too, as I had both on the system). Here are the specs: http://www.grassvalley.com/products/advc55 . Also some comments on it at http://www.amazon.com/Hardware-ADVC-55-d-Converter-Ntsc/dp/B000HGVZG0/ref=sr_1_2 ?ie=UTF8&qid=1323954590&sr=8-2 Here's another source to buy it: http://www.bhphotovideo.com/c/product/312315-REG/Grass_Valley_602005_ADVC_55_Ana log_to_Digital.html .
They also make an ADVCmini, which I haven't used, which is probably less expensive, with specs at http://www.grassvalley.com/products/advcmini

Adobe premiere elements 12 with diamond vc500 one touch video capture device.

Adobe premiere elements 12 and using Diamond vc500 one touch video capture device.
AVI files will not load into Adobe premiere elements 12.
I bought what I thought were the two best software and capture devices.
I am archiving old VHS tapes and using Diamond vc500 capture software called EZ grabber. I thought the best archiving format would be AVI files. As I just started this project. I am willing to do what is needed.
That even being, going and buy another capture device that being for a VCR to PC using a USB are even a Video card.
EZ grabber software ask you to record in what format. I picked AVI. There is DVD - SVCD - VCD - MPG4. I want to archive then go back and edit. The DVD or SVCD format, is that not the same as mpeg 2?
You and I know the drill. Saving in what long term archive format and that dare thing about video compression and losing quality of the videos. Its all a nightmare.
Once again I am willing to buy another capture device for a VCR that will work with Adobe premiere elements 12.
Help please with long term archiving format and capture device.
Thanks

The answer is B.
Capturing the VHS content to computer (via the Diamond vc500 and USB connection and EZ grabber) to obtain an .avi file on your computer and then trying to import that into Premiere Elements with its Add Media/Files and Folders?
When I do that, the Adobe premiere elements 12 crashes or only loads a 2 mins of video.
The firewire connection device "Canopus" product sounds great. But I really don't want to spend that much on my home videos. My PC does not have a Firewire connection. So add a new card for that and the Canopus product. I could just pay someone to do my VHS tapes.
Diamond vc500 $35
Adobe premiere elements 12 $65
Firewire card $50 plus
Canopus $180
$330 is way too much for simple home VHS videos

Usb video capture device software

i have a usb video capture device and i wanted to know if there was a program that lets you watch your vhs movies with it on your computer

Not totally following you here.
You can get an adapter that allows you to plug, say, your VCR into the computer to copy video from a VHS to a DVD, and have it edited on the computer, is that what you are looking for?
My opinions are mine, and mine alone.

Use a capture device twice at the same time?

I have write a application using JMF. But I have a big question that how can I use a capture device several times at the same time????
For example:
I create a player to play video from my webcam on my PC ,and then I want to send the video stream from my webcam to another PC at the same time. But I failed--only one task can work.
For example:
1, I write a class Player and another class RTPTransmit. Then I send the same medialocator to two of them. Then there will be a exception said that capture device is in use. And only one task can work.
2, I write a class Player and another class RTPTransmit. Then I use :
dataSource1 = Manager.createDataSource( locator );
dataSource2 = Manager.createCloneableDataSource( dataSource1 );
then I send dataSource1 to Player object to play video on local PC and send dataSource2 to RTPTransmit to send video to another PC. But only one task will work too.
My question is that how can I use a capture device several times at the same time???
I have tried several ways and sill can not find a method. If anyone know how to do,could you tell me please? Thank you very much.

Yes ,I use Manager.createCloneableDataSource() method to create the clone of the datasource ,but it can not work too. The java doc illustration is :
Creates a cloneable DataSource. The returned DataSource implements the SourceCloneable interface and enables the creation of clones by the createClone method.
If the input DataSource implements SourceCloneable, it will be returned right away as the result. Otherwise, a "proxy" DataSource is created. It implements the SourceCloneable interface and can be used to generate other clones.
When createCloneableDataSource is called on a DataSource, the returned DataSource should be used in place of the original DataSource. Any attempt to use the original DataSource may generate unpredictable results.
It means that if I clone a datasoure from original datasource, then the createCloneableDataSource() method will return a datasuouce implements interface SourceCloneable, right ? I see that the intereface SourceCloneable has a abstract method createClone() , but when I use createCloneableDataSource() to get a source clone, I find that I can not use method createClone(), why??? For example: data1 is the
orginal datasource. Then:
DataSource data1 = Manager.createDateSource( locator );
DataSource data2 = Manager.createCloneableDataSource( data1 );
now data2 is the "proxy" datasource which implemnets the interface, right? But I can not use data2.cloneClone() ,why? Then I write the fllowing code:
DataSource data3 = Mangaer.createCloneableDataSource( data2 );
DataSource data4 = Manager.createCloneableDataSource( data2 );
playOnLocalPc = new PlayOnLocalPc( data3 );
playOnLocalPc.start();
rtpTransmit = new RTPTransmit( data4 );
rtpTransmit.start();
PlayOnLocalPc and RTPTransmit is my own class to play or transmit video stream. But they can not work at the same time. If I play video from webcam on local PC and then start to transmit stream to other PC , the play window will become black. Why?????It is too strange. Dose anyone know the reason ,please tell me, thank you very much. Giving some example code will be better:) Thank you again!

Can't get driver to work with ezcap usb 2.0 video capture device on windows 8.1

I have an ezcap video capture device that works fine on my windows 7 machine but will not work in windows 8.1. The software (arcsoft 3.5) functions properly but will not let me select the video grabber as a source. The driver itself indicates not compatible with 8.1 and the there are no drivers out there that I can find to address this issue? Any known solution would be helpful.

Hi,
It is not from HP. Please try driver from the following link:
http://www.ezcap.tv/ezcap116-drivers?zenid=r53fvgj1n510tdme9itqc9ql52
(After the first screen shot).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Video Capture Device

I have a cheapo Capit usb video capture device. It works fine in my Win 7 T61 with only 4gb RAM and a 2.0gh C2D. When I try to use it in the T400, it's not so good. The monitor frame is scrambled when I go to record and the audio and caption is way off. What did I do? These are both set up nearly identically.
T400,, 2.53ghz T9500,8gb ram Windows 7 Home Premium
T61,15.4 T7300, 2gb RAM, Windows 7 Home Premium
14.1 T23, type 2647 9LU, 1.13 PIII, 1gb, XP Pro

Yea I actually have a sony that has analog to digital passthrough. However, i've been using it as a webcam recently and i'm almost convinced that that has something to do with the fact that i've had to send it for repairs recently. I think that having it on for long periods of time without having a tape in it or using it for recording poses a potential risk for head damage. So im a little wary about using it as a bridge to capture hours of analog footage to my computer. So would you know of any other peripherals designed specifically for capturing analog sources on an imac?

Video Capture Devices?

What is a good video capture device for the macbook that I could use to capture video from my video camera(which has no firewire or USB ports on it).

Your camera is a Hi8 and is also known as "analog". I'm an editor.
Since you're camera doesn't have a FireWire port (which is what all capturing is done with), there's no way to capture without an external device, as you may know.
So, I suggest getting the Canopus ADVC-110. I have it and it works flawlessly with FCP (which is what I edit in) and it will work with iMovie also. There is also the Canopus ADVC-55. For both of these adapters, you'll need to hook up the RCA (white, red and yellow) cables to the device, and capture. Your camera should have RCA inputs. These devices are a little expensive, but they work great. No additional software/drivers. It's worth it.
Canopus ADVC-110
Canopus ADVC-55
Similar in price, personally I would get the ADVC-110.
Remember to mark as helpful or solved.
-benny

I need a video capture device for downloading Band and family video tapes.

Hi, I need to download some old video tapes before they turn to dust. Are there any fairly inexpensive video capture devices that work well with the Imac?
Thanks

Are they VHS video cassettes or something like 8MM camcorder tapes?
If they're camcorder tapes, usually it's best to try to buy an old video camera (MUST have FIREWIRE port).
Then you can play the tape in the camera and capture from the Firewire. Also important, if you have a 2010 (maybe 2009?) or newer iMac, you'll need a cable that is Firewire 400 to fit the camera at one end and Firewire 800 at the other end to connect to the iMac.

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

Similar Messages

Maybe you are looking for