Advice Needed for Video Capture Device

Hi,
I'm looking to buy a USB (or Firewire if they exist) video capture device that can take S-Video and composite connections. Could someone recommend me best one under $150 that is compatible with Snow Leopard? Also, and more importantly, does anyone know if it is possible to capture the signal via Quicktime Pro or Final Cut Pro rather than bundled third party software.
Thanks!

I used the predecessor to the Canopus ADVC55 to load VHS tapes into a mac. As I recall I brought the firewire signal into iMovie (could have been Final Cut Pro too, as I had both on the system). Here are the specs: http://www.grassvalley.com/products/advc55 . Also some comments on it at http://www.amazon.com/Hardware-ADVC-55-d-Converter-Ntsc/dp/B000HGVZG0/ref=sr_1_2 ?ie=UTF8&qid=1323954590&sr=8-2 Here's another source to buy it: http://www.bhphotovideo.com/c/product/312315-REG/Grass_Valley_602005_ADVC_55_Ana log_to_Digital.html .
They also make an ADVCmini, which I haven't used, which is probably less expensive, with specs at http://www.grassvalley.com/products/advcmini

Similar Messages

Looking for video capture devices

when I tried to compile a web cam capture program, I have the following Exception:
Looking for video capture devices
No VFW video detected: JMFSecurityManager: java.lang.UnsatisfiedLinkError: no jmvfw in java.library.path
Please,I need ahelp.

Hi I can recommend v4l4j to capture for video streams with linux. I need a library of functions to quick show video from webcam in JFrames and it did it for me.
try it : http://v4l4j.googlecode.com

I need a video capture device for downloading Band and family video tapes.

Hi, I need to download some old video tapes before they turn to dust. Are there any fairly inexpensive video capture devices that work well with the Imac?
Thanks

Are they VHS video cassettes or something like 8MM camcorder tapes?
If they're camcorder tapes, usually it's best to try to buy an old video camera (MUST have FIREWIRE port).
Then you can play the tape in the camera and capture from the Firewire. Also important, if you have a 2010 (maybe 2009?) or newer iMac, you'll need a cable that is Firewire 400 to fit the camera at one end and Firewire 800 at the other end to connect to the iMac.

Software advice needed for "Video Blaster" Webcam "Go"

Hello All,
I recently purchased a "Webcam Go" and the software I received with it is only supported by Windows 98. I run a Windows XP platform. There is no Creative Labs software to support teh Webcam Go in teh archives.
Could someone give me advice on what to use, even if it's proprietary shareware? Any help will be greatfully appreciated!
Very Best Regards,
Joe Cro
Message Edited by n3ibx on 09-25-2006 07:55 PM

No still its not working my system reboots and a blue screen appears plz help

Opinions on low cost USB video capture devices for FMLE?

I have already tried a few such devices. I would at least like to achieve reasonable SD at 720 X 480. HD would be a plus, but not necessary. My camera has HDMI, SDI, and Component and composit out. I have already tried a couple of capture devices, and the results were as follows.
SIIG USB 2.0 Video Capture Device - JU-AV0012-S1
Pretty clear as to why this was so cheap. It claims full NTSC support, but that is only on the input. Output is 320 X 240 only.
DIAMOND USB 2.0 HD Game Console Video Capture Device GC500 USB 2.0 Interface
Again, this unit claims "HD" but that is only on the input. Output is 640 x 480. The image quality was terrible with the supplied software, or with Adobe FMLE. Noisy, and well below full NTSC quality. Even when fed with the component out of a Sony NX5. Unacceptable. Even for the bargain price at Frys.
Hauppauge HD PVR 2 Gaming Edition
Seems I bought a dud. I went back and forth with Hauppauge support, and never could get this to be detected by FMLE, or the included software. On doing a search online for the error message I received, I discovered many similar trouble reports on various forums. I bought this one at a discounted price. Perhaps this is the reason why.
The notebook I have is a Windows unit, with no expresscard slot, or 1394 input (unfortunately). I did look briefly at the Blackmagic Intesity Shuttle, but it needs USB 3.0.
Curious to hear of any sucess with USB capture and FMLE, and with a device under (hopefully well under?)$200.

I've been streaming with the ION Video2PC capture device...it works flawlessly with no problem. The machine I've been testing it on can only pump out 480p or 540p at the most. But, I'm sure if I used it on a faster machine I would get way better results. You can find them used under $30 bucks online and unlike most cheap capture/input devices, you can access the video and audio in FMLE. Just thought, I'd share they info.

Virtual video capture device driver for screencapture available ?

Does anybody know a way to get screen capture in form of a virtual video capture device? I know there are drivers available for other OS (e.g. Windows), but is this possible with OS-X too ?
I want to use the screencapture not only in iChat, but in Flash based videoconferencing/streaming solutions as well, so the normal screen sharing would not work.
thanks for any help, Mark

Hi,
At one time this was Bundled on Some Macs
http://www.ambrosiasw.com/utilities/snapzprox/
It will let you capture a segment of your Screen with or without Audio
8:07 PM Sunday; March 9, 2008

How to connect a video capture device to Satellite M30X 127

I'm going around in circles trying to find a video capture device that will function with a laptop and would be grateful for advice. By way of example, I'm now looking at the 'Canopus ADVC-110', although still looking around (but not Pinnacle, who seem to have a terrible reputation for capture items).
Problems include:
1. Main problem is - many video capture external devices require a 'line-in' to PC for good quality audio transfer. This laptop doesn't have a line in, only the mike and headphone jacks. In addition, I've also tried a few RCA pins in the 3.5mm microphone/headphones jack and they were too small. How to solve the problem of getting audio from vcr to my PC?
2. The ADVC-110 connects to the PC via Firewire (and S-video), but is a SIX-pin type. M30X is a FOUR-pin type. Are there adapters available?
3. Some capture programmes seem to require huge capacity of RAM. Is a laptop going to be suitable to do the job? (I simply want to capture old vhs tapes from vcr to PC, then burn to DVD with Nero 7 or similar).
Thanks in advance!

Hello
You are right! You must use external device for signal transfer to your notebook. I dont know where you have this info but I have good experiences with Pinnacle product. For data transfer I have used USB port.
'Canopus ADVC-110 is not known to me but I dont see any reason why this should not work well. Use delivered software for video capturing and there should not be any problem.
Only thing is that after recording the whole video material must be prepared for burning and unit need a lot of power to do this well und fast. When you buy this and want to use on right way I recommend you to expand RAM to 1GB.
Compatible memory modules for your Satellite M30x are:
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
Bye

Adobe premiere elements 12 with diamond vc500 one touch video capture device.

Adobe premiere elements 12 and using Diamond vc500 one touch video capture device.
AVI files will not load into Adobe premiere elements 12.
I bought what I thought were the two best software and capture devices.
I am archiving old VHS tapes and using Diamond vc500 capture software called EZ grabber. I thought the best archiving format would be AVI files. As I just started this project. I am willing to do what is needed.
That even being, going and buy another capture device that being for a VCR to PC using a USB are even a Video card.
EZ grabber software ask you to record in what format. I picked AVI. There is DVD - SVCD - VCD - MPG4. I want to archive then go back and edit. The DVD or SVCD format, is that not the same as mpeg 2?
You and I know the drill. Saving in what long term archive format and that dare thing about video compression and losing quality of the videos. Its all a nightmare.
Once again I am willing to buy another capture device for a VCR that will work with Adobe premiere elements 12.
Help please with long term archiving format and capture device.
Thanks

The answer is B.
Capturing the VHS content to computer (via the Diamond vc500 and USB connection and EZ grabber) to obtain an .avi file on your computer and then trying to import that into Premiere Elements with its Add Media/Files and Folders?
When I do that, the Adobe premiere elements 12 crashes or only loads a 2 mins of video.
The firewire connection device "Canopus" product sounds great. But I really don't want to spend that much on my home videos. My PC does not have a Firewire connection. So add a new card for that and the Canopus product. I could just pay someone to do my VHS tapes.
Diamond vc500 $35
Adobe premiere elements 12 $65
Firewire card $50 plus
Canopus $180
$330 is way too much for simple home VHS videos

Video Capture Devices?

What is a good video capture device for the macbook that I could use to capture video from my video camera(which has no firewire or USB ports on it).

Your camera is a Hi8 and is also known as "analog". I'm an editor.
Since you're camera doesn't have a FireWire port (which is what all capturing is done with), there's no way to capture without an external device, as you may know.
So, I suggest getting the Canopus ADVC-110. I have it and it works flawlessly with FCP (which is what I edit in) and it will work with iMovie also. There is also the Canopus ADVC-55. For both of these adapters, you'll need to hook up the RCA (white, red and yellow) cables to the device, and capture. Your camera should have RCA inputs. These devices are a little expensive, but they work great. No additional software/drivers. It's worth it.
Canopus ADVC-110
Canopus ADVC-55
Similar in price, personally I would get the ADVC-110.
Remember to mark as helpful or solved.
-benny

No video capture devices were found

I recently discovered that the iSight camera (now named FaceTime HD camera?) does not work on my recently acquired MacBook Pro Retina 15".
I have attempted to reset the SMC, but that did not appear to solve the problem.
Under "System Information" > Camera it simply states "No video capture devices were found".
It also does not appear under USB as some other threads have suggested.
When I start Photo Booth or FaceTime the camera icon with a line across is displayed, and Photo Booth also states "There is no connected camera".
I am currently running OS X 10.8.5 (12F45).
As far as I can tell the problem has been there since I first received the machine back in June, I simply have not had any reason to use the camera until now.
Have anyone else run into a similar problem, or is there perhaps somewhere I could look at log files or system files or something like that to attempt to track down the cause of the problem?

ken_guru wrote: ... is there perhaps somewhere I could look at log files or system files or something like that to attempt to track down the cause of the problem?
It sounds like you already have done everything you need to do.
Because your camera is not being recognized by your "recently acquired MacBook Pro", contact Apple or the retailer who sold it to you for help. They can tell you if your Mac needs to be repaired or exchanged for one that works properly. Otherwise, they can show you how to use the camera.
Message was edited by: EZ Jim
Mac OSX 10.9

Camera not working (No video capture devices were found)

Hi,
Macbook air late 2010 upgraded to 10.9.2 camera not detected, it was working 2 minutes before upgrade.
system info states - No video capture devices were found.
I have re-installed 10.9.2 clean using cmd-r on startup,
repaired permissions,
reset SMC
still getting - No video capture devices were found.
anyone got any advice,
Thanks,
Charles

Hi,
Ok switched my Macair on to re-install 10.9.1, thought I'd give facetime one last try and its working
So the way I fixed it was to uninstall all 3rd party video driver (like airparrot).
This did not fix problem, booted up holding the Command-R keys.
Re-installed Maverick
Restarted
Camera was still not working
Downloaded latest Skype
Ran Skype - no camera detected in preferences
Repaired permissions using Disk Utility
Left it on for few hours
Restarted next morning, opened Facetime, now everything is working
Charles

Detecting Video Capture Devices without Installing JMF

Hi All,
I want to detect the video capture devices, without installing the JMF.
I had included the jmf (windows version) in lib path in netbeans ide. I am able to detect the audio capture device. But unable to detect the video capture devices. But if I install the JMF, I am able to detect the Video Capture devices in My system. Can anyone help me?
Thanks,
Vinoth Kumar.

YES! Please take a look at SIP Communicator project. They have all what u want.
The main idea is copy all .dll files to System or System32 (Please check files which JMF will copy to ur computer and where).
U need to have jmf.jar and sound.jar too ( maybe more) in your computer.
Your program should have DirectSoundAuto.java, JavaSoundAuto.java, JavaSoundDetector.java, JMFInit.java. Those files are in JMStudio source code. They are used to detect all capture devices and register it to JMF, but wait !!! where they will be saved? In order to save information about capture devices which are detected, you should create "jmf.properties" file in the same location with jmf.jar.Therefore, u should modify the JMFInit.java so it can check if the "jmf.properties" exists. If it's not, you have to create it.
Check SIP Communicator at Folder "media" then "device". They have modified those files I mentioned above and created some new files to SC can detect more devices.
Edited by: tamngminh on Sep 16, 2008 9:50 AM

Can't get driver to work with ezcap usb 2.0 video capture device on windows 8.1

I have an ezcap video capture device that works fine on my windows 7 machine but will not work in windows 8.1. The software (arcsoft 3.5) functions properly but will not let me select the video grabber as a source. The driver itself indicates not compatible with 8.1 and the there are no drivers out there that I can find to address this issue? Any known solution would be helpful.

Hi,
It is not from HP. Please try driver from the following link:
http://www.ezcap.tv/ezcap116-drivers?zenid=r53fvgj1n510tdme9itqc9ql52
(After the first screen shot).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Computer set up for video capture

I believe there are special setting of the computer for video capture. I have done these in the past but cannot remeber how or find any info. One setting was to send the data form the camcorder straight to the hard disc. Can anyone help me, please ?
johnjep

If you're capturing from a tape-based camcorder, you should capture over FireWire.
For hard drive camcorders, you'll need to use the Media Downloader built into Premiere Elements to get the video files.
Current computers can usually capture with no special set-up. Although Vista can use a bit of tweaking, as you can see if you click on the FAQs listed to the right of this forum.
If you've got a second hard drive, you can get the most efficient capture by capturing to it rather than your C drive.

Advice Needed for Video Capture Device

Similar Messages

Maybe you are looking for