Aged Reporting SAP 8.8

We are just looking at upgrading to 8.8, I am aware of a couple of changes regarding the ageing reports. Is it true that the report will now bring through documents in there original currency despite them being setup as multi currency? We have have had a few issues with getting a debtors report for credit control and audit purposes displaying documents in there original currency beacuse we have our BP's setup as mulit currency.
Thanks

Hi David,
Yes, now in SBO 8.8 you can see aging reports are in multi currency which was not available in earlier versions.
Thanks
Sachin

Similar Messages

Customized Vendor Aging Report

Dear Experts,
We had developed a customized Vendor Aging Crystal Report as on Date for one of our customer which is similar to SAP's Vendor Liabilities Aging, just a minor change we have been done in our report for calculating the due date of AP Invoice only for the document type as Item, from AP Invoice document date to GRPO's posting date.
So to build this report we had consider following transactions AP Invoice, AP Credit Memo, AP Down Payment Invoice, Outgoing Payment, Incoming Payment & Journal Entry and also we had concluded following scenario's:-
AP Invoice based on GRPO
Standalone AP Invoice's Item / Service.
AP Invoice adjusted against AP Credit Memo.
AP Invoice knocked off against Reconciliation.
AP Credit Memo based on AP Invoice
AP Credit Memo standalone Item /Service
AP Credit Memo adjusted against Outgoing Payment
AP Credit Memo knocked off against Reconciliation
AP Down Payment Invoice - Open.
Outgoing Payment - On Account
Outgoing Payment - Against Transaction.
Outgoing Payment - Direct Knocked off in Reconciliation.
Incoming Payment - On Account
Incoming Payment - Direct Knocked off in Reconciliation.
Journal Entry - Adjusted and Unadjusted
After considering all the possible scenario which do have impact with Vendor has been covered but still our report gets failed to tally with SAP Vendor Liabilities Aging Report on back dated date specially with reco happened transaction which get failed on comparison with Input parameter date against transaction date and reconciled date.
Please refer the attachment contains Store Procedure of this report. We would highly appreciate and thankful if some one could help us in optimizing our store procedure which could get tallied with SAP Vendor Liabilities Aging Report.
Many Thanks in Advance......
Regards
Krishna Kumar

Hi,
Not able to open attached file. Please check these threads:
Vendor Aging Report SAP B1
Customer Receivables Aging - Query
Thanks & Regards,
Nagarajan

Overdue amount in Customer Receivable Aging report

Hi all!
Got a question.
In customer receivable aging report SAP Business One displays the relevant open receivables in columns representing the specifications you made in the Interval field in the selection criteria window. But how does it counts them? I've tried to pick all total from invoices,where between doc date and aging date 30 days passed. But it displays incorrect values. Is there any specific query for that?
Please see screenshot attached for the values i need.

Hi,
Try with below query.But your selection criteria for date should be week.
declare @Cust as nvarchar(20)
Declare @FromDate Datetime
Declare @ToDate Datetime
declare @Group as nvarchar(20)
set @cust = (select max(t0.cardcode) from OINV t0 where t0.cardcode = '[%0]')
Set @FromDate = (Select min(t0.Docdate) from dbo.OINV t0 where t0.Docdate >='[%1]')
Set @ToDate = (Select max(t0.Docdate) from dbo.OINV t0 where t0.Docdate <='[%2]')
set @group = (select max(t2.groupname) from OCRG t2 where t2.groupname = '[%3]')
SELECT [CustName] as CustName, [G] as CustGroup,[1] as W1, [2] as W2, [3] as W3, [4] as W4, [5] as W5, [6] as W6, [7] as W7, [8] as W8, [9] as W9, [10] as W10, [11] as W11, [12] as W12, [13] as W13, [14] as W14, [15] as W15, [16] as W16, [17] as W17, [18] as W18, [19] as W19, [20] as W20, [21] as W21, [22] as W22, [23] as W23, [24] as W24, [25] as W25, [26] as W26, [27] as W27, [28] as W28, [29] as W29, [30] as W30 , [31] as W31, [32] as W32, [33] as W33, [34] as W34, [35] as W35, [36] as W36, [37] as W37, [38] as W38, [39] as W39, [40] as W40, [41] as W41, [42] as W42, [43] as W43, [44] as W44, [45] as W45, [46] as W46, [47] asW47, [48] as W48, [49] as W49, [50] as W50, [51] as W51, [52] as W52
from
(SELECT T0.[CardName] as CustName, sum(T0.[DocTotal]) as Total, datepart(ww,T0.[DocDate]) as week, t2.groupname as G FROM OINV T0 left JOIN OCRD T1 ON T0.CardCode = T1.CardCode left JOIN OCRG T2 ON T1.GroupCode = T2.GroupCode WHERE year(T0.[DocDate]) = 2013 and T0.[CardCode] = @Cust and T0.[DocStatus] ='o' and T0.[DocDate] between @fromdate and @todate and t2.groupname = @group GROUP BY T0.[CardName],T0.[DocDate],t2.groupname
union all
(SELECT T0.[CardName] as CustName, -sum(T0.[DocTotal]) as Total, datepart(ww,T0.[DocDate]) as week,t2.groupname as G from ORIN T0 left JOIN OCRD T1 ON T0.CardCode = T1.CardCode left JOIN OCRG T2 ON T1.GroupCode = T2.GroupCode WHERE year(T0.[DocDate]) = 2013 and T0.[CardCode] = @Cust and T0.[DocStatus] ='o' and T0.[DocDate] between @fromdate and @todate and t2.groupname = @group GROUP BY T0.[CardName],T0.[DocDate],t2.groupname )) S
Pivot
(sum(S.total) For WEEK IN ([1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12], [13], [14],[15],[16],[17],[18],[19],[20],[21], [22], [23], [24], [25], [26], [27], [28],[29], [30], [31], [32],[33],[34],[35],[36],[37],[38],[39],[40], [41],[42],[43],[44],[45],[46],[47],[48],[49],[50],[51],[52])) P
Thanks & Regards,
Nagarajan

AP aging report from SAP

We found that AP aging report from SAP is not tie with Balance in Balance sheet. Please advise how to find the report which match with our requirement.
Concept of the AP aging report is to age outstanding AP as at the end of month (Open item date). We found that A/P aging report which we currently use is cannot match to balance per G/L. (Please see detail in attached file). And the balance in AP aging report is always changes if we retrieve data on difference timing.
Additionally, this report is not show the reconciliation account, please advise whether it is possible to show summary line which sum by reconciliation account.
Please advise if you have another SAP transaction or any advise on this.
kindly suggest

Hi,
For ageing report please go to fbl3n and go for change layout there is a option for ageing and posting period choose those two and subtotal it according to posting then you will get period wise meand month wise ageing report for vendor.
S_ALR_87012078 - Due Date Analysis for Open Items
Hope this is clear if yes assign points
Regards,
Sankar

Creation of Vendor Aging Report in SAP BI.

Hello,
There is requirement to create the Vendor Aging report in SAP BI Cube.
In order to show the Aging of the Vendor in different buckets.
Can anyone help me out with the Links/Blogs/Wiki ... URL's .
I tried finding in net couldnt get anything related to this.
Thank you for the help in advance.
Regards,
Adhvi

Hello Obaid,
Thanks for the reply.
got the URL for Vendor Aging Report ..which has better detailed information.
http://help.sap.com/saphelp_nw70/helpdata/EN/69/b4e9503d6a4f39b66e67b1cedf41af/frameset.htm
0FIAP_M30_Q0003 not found in the BI Content
Creation of Vendor Aging Report in SAP BI.
Vendor Ageing formula
If you come across any further Customization of the Reports related to the Vendor ageing reports based on the URL mentioned below...let me know.
Thanks & Regards,
Adhvi

Vendor Ageing Report in SAP B1 8.8 Version

Hi All,
I am using SAP B1 8.8 Version.
I have generated Vendor Ageing Report for all Vendors. In this report I found few vendors are appearing multiple times with different Ageing values. I wanted to know why this happend???
Please do the needfull.
Cheers,
Dasari

Hi
Are any vendor names changed in the past?
Thanks,
Gordon

Need SAP BW AR Aging Report with R/3 Aging Report Should Match

Hello All,
Could you please let me know SAP Delivered AR Aging Report on BW Side should match with SAP R/3 AR Aging Report for a given Customer.
When I ran the report on BW Side I am able to match the report values with InfoProvider Values and also with RSA3 Extractor (0FI_AR_4).
But when i tried to compare BW report with ECC Report values are not Matching at a given Customer Number.
Please explain the best practice to match the values of BW Standard Aging report with ECC standard AR aging report.
Thanks,
Geetha

Hi,
I am actually running the SAP Delivered Report in BW.
So I didn't changed any thing in report.
I m running the report in ECC using s_alr_87016128 tcode.
Still I m getting the amount difference.
I have checked at customer level with company code and Key date.
Can i get inputs on these.
ECC Report s_alr_87012168
BW Report:0FIAR_C03_Q0005
Thanks,
Geetha

SAP Business One 8.8 - Customer Receivables Ageing Report

Hi All,
We have one client on ramp up for SAP Business One 8.8. They love the new version and the feedback has been exceptional. I have one issue with the customer receivables ageing report. Once the results are displayed we are applying a filter on the report which does not seem to meet our expectations (Possible Bug?) We are trying to filter a particular ageing column only to display values if they are greater than 0 for that column. The filter partailly works since it displays the values greater than 0 but it also displays values where the column value = "Blank" thus not achieving the desired result! Does anybody know how to do this and if not should I log this on the SAP Messages Dashboard?
I have also tried to use a condition where the column is not equal to blank but then again it displays customers who have a negative balance in that column! Once again not the desired result.
Any help / feedback will be much appreciated!
Thanks
Andre Pienaar

Hi,
Please check by selecting any amount appearing in the list in the column you are filtering in the "Greater than". After selcting the value update the same to be zero and then filter the results.
Check if it bring the desired results.
Also, if not, please update us with the patch you are checking in order to test.
Kind Regards,
Jitin
SAP Business One Forum Team

Detailed Aging Report from SAP B1 v2007A

Hello all,
I have SAP Business One v 2007 A in my company. The auditors are coming in next week and I was trying to get the Aging report for both vendor and customer. The default summary looks good. To get the details, I have to go into each customer/vendor and collect them. Is there a way to get all the details in one shot (like an executing an SQL)?
Thank you all so much.
Manoj.

Hello Manoj - maybe try this since it uses the actual General Journal entries found in the JDT1 table. PS - I have no idea why it does not show the NOT EQUAL characters of < and > in the last CASE. The CASE calculation should be the same in all instances - make sure you add that before running. I used the appropriate coding for the SQL - something about SAP forums!!!
For Vendors, just change the CardType to S in the WHERE clause, the Transtype, and change the column headings to what you want them to say.
Hope this helps...
Regards - Zal
--F-BP AR Aging Report Detail Ver 1 ZP 2011 04 16
--DESCRIPTION: SQL uses General Ledger Detail to create an Aging Report which shows
actual invoices, credit memos, and payments by reference date in the JDT1 table.
--AUTHOR(s):
--Version 1 Zal Parchem 16 April 2011
SELECT
T1.CardCode AS 'Cust Num',
T1.CardName AS 'Cust Name',
T0.SysDeb AS 'Debit Amt',
T0.SysCred * -1 AS 'Credit Amt',
CASE
WHEN T0.TransType = 13 THEN 'AR Invoice'
WHEN T0.TransType = 14 THEN 'AR Cred Memo'
WHEN T0.TransType = 24 THEN 'Payment'
ELSE 'Other'
END AS 'Trans Type',
T0.Ref1 AS 'Reference',
FcCurrency AS 'Currency',
CONVERT(VARCHAR(10), RefDate, 103) 'Posting Date',
CONVERT(VARCHAR(10), DueDate, 103) 'Due Date',
CONVERT(VARCHAR(10), TaxDate, 103) 'Doc Date' ,
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 31 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '0-30 Days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 30
AND (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 61 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '31 to 60 Days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 60
AND (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 91 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '61 to 90 days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 90
AND (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 121 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '90 to 120 Days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 120
THEN
CASE
WHEN SysCred != 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '120 Plus Days'
FROM JDT1 T0
INNER JOIN OCRD T1
ON T0.ShortName = T1.CardCode
AND T1.CardType = 'C'
WHERE
T0.IntrnMatch = '0'
AND T0.BalDueDeb != T0.BalDueCred
ORDER BY
T1.CardCode,
T0.TaxDate
FOR BROWSE

No. of days outstanding variable in aging report for SAP 8.8

Hi All,
Would like to check whether anyone knows what are the variable numbers for 'No of days outstanding' column in aging report? I would like to include this field in the detail aging report print out. Thanks.

Hi....
Check this link: [PLD_Variables_8.8|https://websmp105.sap-ag.de/~sapidb/011000358700000449672010E/HowTo_PLD_Variables_88.zip]
Regards,
Bala

Bp aging statement - sap b1 default crystal report

hi all
I am trying to modify SAP's default sap crystal report for aging. and I am having a lot of difficulties!
how do I modify this layout to serve my purposes? i am not able to add any table to this report. all values on this layout come from a table called pld_items. where does this table come from?
does anyone know how to modify this? is there any instructions anyplace? help!
prem

Hi Prem
Aging report in sap b1 as an system report we can't change any thng in system default reports basically locked for change but you may create your own aging report through crystal report or XLR .
I HOPE BELOW QUERY SOLVE YOUR PROBLEM .
select T1.cardcode 'Bp Code',T1.cardname 'Name',sysdeb 'Debit Amount',syscred 'Credit Amount', (sysdeb - syscred) as 'Balance Due',
case T0.transtype
when '13' then 'INV'
when '14' then 'AR CN'
when '24' then 'INCOMING'
else 'Other'
end 'Type',
Ref1,
fccurrency 'BP Currency',
CONVERT(VARCHAR(10), refdate, 103) 'Posting Date',
CONVERT(VARCHAR(10), duedate, 103) 'Due Date',
CONVERT(VARCHAR(10), taxdate, 103) 'Doc Date' ,
CASE
when (DATEDIFF(dd,refdate,current_timestamp))+1 < 31
then
case
when syscred <> 0 then -syscred
else sysdeb
end
end "0-30 days",
case when ((datediff(dd,refdate,current_timestamp))+1 > 30
and (datediff(dd,refdate,current_timestamp))+1< 61)
then
case
when syscred <> 0 then -syscred
else sysdeb
end
end "31 to 60 days",
case when ((datediff(dd,refdate,current_timestamp))+1 > 60
and (datediff(dd,refdate,current_timestamp))+1< 91)
then
case
when syscred <> 0 then -syscred
else sysdeb
end
end "61 to 90 days",
CASE
when (DATEDIFF(dd,refdate,current_timestamp))+1 > 90
then
case
when syscred= 0 then sysdeb
when sysdeb= 0 then -syscred
end
end "90 + days"
from dbo.JDT1 T0
INNER JOIN dbo.OCRD T1 ON T0.shortname = T1.cardcode and T1.cardtype = 'c'
where T0.intrnmatch = '0' and T0.BALDUEDEB != T0.BALDUECRED
ORDER BY T1.CARDCODE, T0.taxdate
REGARDS
RAMANDEEP

SAP Query for AR Aging Report

Hello Gurus-
I am trying to build a query for Aging report, and would like to include something like this:
Customer-Reference-Payment terms-Due date-Current-31-60days-61-90days-91-120days-over120days-toatal amount.
I have an infoset which includes BSID, KNA1, KNB1. I have maintained local fields:
Due Date = Baseline date + cash discount days
Statement Date = My input date.
Current = Condition (DUEDTE >= STATDTE - 30) formula (Amount)
31 - 60 Days = Condition (DUEDTE >= STATDTE - 60 AND DUEDTE < STATDTE - 30) formula (Amount)
61 - 90 Days = similar to above
91 - 120 Days = similar to above
Amount = - 1 * (If Debit credit indicator = "H" then "Amount in local currency") otherwise "Amt in Loc.Cur"
Over 120 Days = similar to above
When I enter a statement date of today it works hunky dory...it all looks good...my current column looks good and do the rest. When i want to run this query as of couple of months ago (if today is 12/19/08 and i wanted to run my aging report for 10/31/08) it should give me aging as of my statement date 10/31/08 but it does not. It calculates the total amount as of today. I know because of local field "Amount" where i gave amount in local currency, but how would I tell that it should pick up amount in local currency till the statement date?
Any input in this regards is highly helpful.
Thanks,
RNarayan

Hi Ram,
On your aging report you want to see invoices which are still not paid (or still open) as of a certain date. This date is "key date". You need to define a variable for key date (which is normally system date if you run today) but it could be a past date.
So key date is let us say Oct 31st (X) and the system date is Dec 19th. When you run the report as of Oct 31st all invoices that are posted prior to Oct 31st (posting date less than X) and are still in BSID will show on your report. There is no issue here.
Let us say an invoice was created on Oct 25th (Y) and was paid on Nov 15th (Z). The clearing date is Z. That means if you run the aging report today this invoice will not show.
But you want to run the report on Oct 31st. This means X is greater than Y but is less than Z.
Clearing date and posting date are part of BSAD. Report run date is the user input and is a variable.
With the above concept and with the help of an ABAP programmer you should be able to solve the problem.
Regards
Sharabh

SAP B1 crystal report: Customer Receivable Aging report

Hi All, I want to write a Customer Receivable Aging report in crystal report. I was using query to union open AR crdit memo and AR invoice.   but, I foggot to add incomming payment ORCT.   I really have trouble to get Customer Receivable Aging report . Can anyone help me? thanks    Is that I did in wrong direction?
SELECT OINV.DocEntry,OINV.DocNum,OINV.ObjType,OINV.CardCode,OCRD.CntctPrsn,OCRD.fax,OINV.NumAtCard,OINV.Address,OCTG.PymntGroup
       ,OINV.CardName,OINV.DocDate,OINV.DocDueDate,OINV.DocCur,OINV.DocTotalFC,
       OINV.DocTotal, (OINV.DocTotal-OINV.PaidToDate) as AmountAUD
FROM SAPLIVE.dbo.OINV OINV join SAPLIVE.dbo.OCTG OCTG
On OINV.GroupNum=OCTG.GroupNum
         join SAPLIVE.dbo.OCRD OCRD
         On OINV.CardCode=OCRD.CardCode
WHERE OINV.CANCELED='N' AND OINV.DocStatus='O' AND (OINV.DocTotal-OINV.PaidToDate)>0
union
SELECT ORIN.DocEntry,ORIN.DocNum,ORIN.ObjType,ORIN.CardCode,OCRD.CntctPrsn,OCRD.fax,ORIN.NumAtCard,ORIN.Address,OCTG.PymntGroup
       ,ORIN.CardName,ORIN.DocDate,ORIN.DocDueDate,ORIN.DocCur,ORIN.DocTotalFC,
       ORIN.DocTotal,(ORIN.DocTotal-ORIN.PaidToDate)as AmountAUD
FROM SAPLIVE.dbo.ORIN ORIN join SAPLIVE.dbo.OCTG OCTG
On ORIN.GroupNum=OCTG.GroupNum
   join SAPLIVE.dbo.OCRD OCRD
         On ORIN.CardCode=OCRD.CardCode
WHERE ORIN.CANCELED='N' AND ORIN.DocStatus='O' AND (ORIN.DocTotal-ORIN.PaidToDate)

Hello Julian - maybe you can start with the JDT1 table which contains all of the General Ledger Journal Entries...
Hope this helps...
Regards - Zal
--F-BP AR Aging Report Detail Ver 1 ZP 2011 04 16
--DESCRIPTION: SQL uses General Ledger Detail to create an Aging Report which shows
actual invoices, credit memos, and payments by reference date in the JDT1 table.
--AUTHOR(s):
--Version 1 Zal Parchem 16 April 2011
SELECT
T1.CardCode AS 'Cust Num',
T1.CardName AS 'Cust Name',
T0.SysDeb AS 'Debit Amt',
T0.SysCred * -1 AS 'Credit Amt',
CASE
WHEN T0.TransType = 13 THEN 'AR Invoice'
WHEN T0.TransType = 14 THEN 'AR Cred Memo'
WHEN T0.TransType = 24 THEN 'Payment'
ELSE 'Other'
END AS 'Trans Type',
T0.Ref1 AS 'Reference',
FcCurrency AS 'Currency',
CONVERT(VARCHAR(10), RefDate, 103) 'Posting Date',
CONVERT(VARCHAR(10), DueDate, 103) 'Due Date',
CONVERT(VARCHAR(10), TaxDate, 103) 'Doc Date' ,
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 31 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '0-30 Days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 30
AND (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 61 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '31 to 60 Days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 60
AND (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 91 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '61 to 90 days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 90
AND (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 < 121 THEN
CASE
WHEN SysCred < > 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '90 to 120 Days',
CASE
WHEN (DATEDIFF(DD,RefDate,Current_Timestamp)) +1 > 120
THEN
CASE
WHEN SysCred != 0 THEN SysCred * -1
ELSE SysDeb
END
END AS '120 Plus Days'
FROM JDT1 T0
INNER JOIN OCRD T1
ON T0.ShortName = T1.CardCode
AND T1.CardType = 'C'
WHERE
T0.IntrnMatch = '0'
AND T0.BalDueDeb != T0.BalDueCred
ORDER BY
T1.CardCode,
T0.TaxDate
FOR BROWSE

Inventory Aging Report in SAP BI

Dear All,
Please let me know the best way to calculate the inventory aging report for materials in inventory management .
Based on the Key date we have to calculate the inventory mangement report . And the key date will be may or may not the sy-date .,
Please let me know possible way to achive this report.
Thanks
Regards,
Sai.K

Dear Sai
Inventory Ageing is a subject by itself. Do you have the functional logic to derive the ageing of an inventory. I mean how does the business wants to define ageing. Is your material batch managed.
Regards
GN

SAP Query (SQ01) Customer ageing report

Dear All,
My Customer want Customer ageing report only for" Due amount" open document in Sq01.Customer ageing report based on Document date+Payment term.
thanking you,
Rupang shah

Hi
We also required the same. Since no standard report available, we have developed ABAP report for the same.
regards
Ravi

Aged Reporting SAP 8.8

Similar Messages

Maybe you are looking for