Agent Assignment showing error "Please position the cursor correctly"

Hi Friends,
I have a strange problem that has come up suddently in the development client. The "Agent Assignment" which was happening earlier is not working anymore. Instead it is showing an information message "Please position the cursor correctly". I am doing the agent assignment the same way i used to do it earlier but its not happening. I tried changing the agent assignment for most of the task types including the "Activity" task, "Decision" task. But nothing seems to work....
The agent assignment is happening in Sandbox client but not in Development client.
Is it some BASIS side settings ?? What may be the exact cause ??
Please help.
Thanks,
Shashank Shirali

You do not have the proper authorization to do the agent Assignment. Take a SU53 dump and you will find our which authorization is missing and ask the Security folks to provide the authorization.
Thanks
Arghadip

Similar Messages

Error in TCode iview Select a line or position the Cursor correctly

Hi All,
I am getting the below error while selecting the row in Tcode iview
Select a line or position the Cursor correctly.
You have not selected a delivery or a delivery item for processing and the cursor is not positioned on a valid line, even after i am
selecting the Delivery and click on the execute button
My system config :
NW04s SP 20
Thanks&Regards
Murthy

Hi Murthy,
Create the Iview again.Hope the issue will resolve.
Thanks,
Arun

Why is my BDC_CURSOR command not working to position the cursor?

Why is my BDC_CURSOR command not working to position the cursor? Here are the details regarding my issue.
I am writing a BDC to mass delete routing material assignments using transaction CA02. I am OK to navigate through the initial screen to go to the Header screen and from here I am OK to navigate to the Material Assignments screen. But once here, I cannot get the BDC_CURSOR command to take me into the list. Here are the commands I am using. Please let me know what I may try differently.
CA02 Material Assignment - Set position <-- this resets list of materials to correct position
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'MAPL-MATNR(01)'.    <-- this is not working to set the cursor into the list
PERFORM bdc_field       USING 'BDC_OKCODE' '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.

Thank you for your reply.
I had used SM35 to record. However, I was not aware of the "create program" feature. I had commented out a section from my previous post which I have now added back (latest code below). But it still did not resolve the issue.
When I execute with dismode = 'N', I get back error message "No batch input data for screen SAPLCZDI 1010".
When I execute with dismode = 'E' (only show dynpros when error), it stops at the material selection screen without placing my cursor in the list. I can then MANUALLY click to set the cursor position in the list, MANUALLY click the trashcan, it then uses my BDC command to respond to the popup asking "Do you want to delete", still leaving me at the material selection screen. I can then MANUALLY click the green check (or enter), then it continues with the BDC to go back to the previous screen, and saves. But it still will not place my cursor in the material selection list (SAPLCZDI screen 1010).
Here is code used. It is the second section of code labeled "CA02 Material Assignment - Delete" that is not working.
CA02 Material Assignment - Set position
this code functions to position the desired material to first in screen list
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'MAPL-MATNR(01)'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
Acknowledge Pop-Up Screen
PERFORM bdc_dynpro      USING 'SAPLSPO1' '0100'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=YES'.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.

How to position the cursor in a text

I there a better way to position the cursor in a text portion other than trying it several times until the OS picks the right space? I know the iPad has a good way to do it by zooming in.
Or is RIM working on it.....

I've been pretty successful at getting the cursor to hit where I want in text entry boxes.
Maybe some more practice will make perfect. Worked for me, until I got used to,and then again maybe my using a touchscreen smartphone, the process just comes second nature for me.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to position the cursor at the end of the text with EDIT_TEXT?

Hello, it wanted to ask to them if somebody could make work the module of function EDIT_TEXT so that it positions the cursor at the end of the text that is visualizing in the text editor. In the documentation it says that passing a ' X' to him in the field scrollend of the parameter Control is obtained that operation. Nevertheless, I did this and the cursor continues appearing at the beginning of the text that visualizes.
Somebody could help me please?
Regards,
Gabriel
PD: The code that I use is the following one:
FORM f_ingresar_comentarios.
DATA: l_action,
l_result LIKE itcer,
l_pedido LIKE thead-tdname,
li_coment_save LIKE i_comentarios OCCURS 0,
li_coment_aux LIKE i_comentarios OCCURS 0 WITH HEADER LINE,
l_lines TYPE i,
l_lines_save TYPE i,
l_lines_insert TYPE i,
l_index TYPE i,
l_index_aux TYPE i,
l_insert,
lwa_control LIKE itced.
CLEAR: l_action.
CLEAR i_comentarios.
REFRESH: i_comentarios,
li_coment_save,
li_coment_aux.
l_pedido = v_pedido.
Leemos el texto si es que existe
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = v_id_text
language = sy-langu
name = l_pedido
object = c_ekko
IMPORTING
header = wa_cabecera
TABLES
lines = i_comentarios "Lineas de texto leídas
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
Armamos la cabecera por primer comentario para el pedido
CLEAR wa_cabecera.
wa_cabecera-tdobject = c_ekko. "Objeto en tabla TTXID
wa_cabecera-tdname = v_pedido. "Nro de pedido
wa_cabecera-tdid = v_id_text. "ID en tabla TTXID
wa_cabecera-tdspras = sy-langu. "Lenguaje
wa_cabecera-tdlinesize = 70.
ENDIF.
Salva comentarios originales
li_coment_save[] = i_comentarios[].
lwa_control-scrollend = c_x. " c_x = 'X'
Abre el editor de texto
CALL FUNCTION 'EDIT_TEXT'
EXPORTING
header = wa_cabecera
save = space
control = lwa_control
IMPORTING
newheader = wa_cabecera
function = l_action
RESULT = l_result
TABLES
lines = i_comentarios
EXCEPTIONS
object = 1
id = 2
language = 3
name = 4
linesize = 5.
Si cambio los comentarios, actualiza comentarios
CASE l_action.
WHEN c_unchanged.
WHEN c_delete.
WHEN c_update OR
c_insert.
Obtiene cantidad de lineas de comentarios originales y modificados
DESCRIBE TABLE li_coment_save LINES l_lines_save.
DESCRIBE TABLE i_comentarios LINES l_lines.
Si se insertaron lineas...
IF l_lines > l_lines_save.
Calcula cantidad de lineas a insertar para luego calcular valor de
indice a partir del cual insertar los nuevos comentarios
l_lines_insert = l_lines - l_lines_save.
l_index = ( l_lines - l_lines_insert ) + 1.
Controla que al menos una de las lineas insertadas sea diferente de
blanco
l_index_aux = l_lines.
l_insert = c_n.
DO l_lines_insert TIMES.
READ TABLE i_comentarios INDEX l_index_aux.
IF sy-subrc = 0 AND
i_comentarios-tdline <> space.
l_insert = c_s.
EXIT.
ENDIF.
l_index_aux = l_index_aux - 1.
ENDDO.
IF l_insert = c_s.
Carga comentarios originales y agrega lineas insertadas
li_coment_aux[] = li_coment_save[].
APPEND LINES OF i_comentarios
FROM l_index
TO l_lines
TO li_coment_aux.
Setea variable para indicar actualizacion de comentarios.
v_comentario = 'S'.
Agrega usuario y fecha del comentario
CONCATENATE sy-uname
sy-datum
INTO li_coment_aux-tdline
SEPARATED BY space.
li_coment_aux-tdformat = '*'.
APPEND li_coment_aux.
Grabamos el texto
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
client = sy-mandt
header = wa_cabecera
savemode_direct = c_x
IMPORTING
newheader = wa_cabecera
TABLES
lines = li_coment_aux
EXCEPTIONS
id = 1
language = 2
name = 3
object = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
ENDCASE.
ENDFORM. " f_ingresar_comentarios
In addition, I made another program simpler that it uses the same functions and also have the same problem:
*& Report Y_GVA_TEXT *
REPORT y_gva_text .
DATA: wa_cabecera LIKE thead,
i_comentarios LIKE tline OCCURS 0 WITH HEADER LINE.
DATA: l_action,
v_comentario,
l_result LIKE itcer,
v_pedido LIKE thead-tdname VALUE '3',
l_pedido LIKE thead-tdname,
c_a05 LIKE thead-tdid VALUE 'A05',
c_ekko LIKE stxh-tdobject VALUE 'EKKO',
l_lines LIKE sy-tabix,
lwa_control LIKE itced.
CONSTANTS: c_x VALUE 'X',
update VALUE 'U', "Langtext verändert
insert VALUE 'I', "Langtext eingefügt
delete VALUE 'D', "Langtext gelöscht
modify VALUE 'M', "Kein Langtext, Inlinezeile veränd.
unchanged VALUE ' '.
CLEAR: l_action.
CLEAR i_comentarios.
REFRESH i_comentarios.
Leemos el texto si es que existe
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = c_a05
language = sy-langu
name = v_pedido
object = c_ekko
IMPORTING
header = wa_cabecera
TABLES
lines = i_comentarios "Lineas de texto leídas
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Armamos las cabecera para mostrar los comentarios
CLEAR wa_cabecera.
wa_cabecera-tdobject = c_ekko. "Objeto en tabla TTXID
wa_cabecera-tdname = v_pedido. "Nro de pedido
wa_cabecera-tdid = c_a05. "ID en tabla TTXID
wa_cabecera-tdspras = sy-langu. "Lenguaje
wa_cabecera-tdlinesize = 70.
ENDIF.
lwa_control-noendlines = c_x.
lwa_control-scrollend = c_x.
Abre el editor de texto
CALL FUNCTION 'EDIT_TEXT'
EXPORTING
header = wa_cabecera
save = space
control = lwa_control
IMPORTING
newheader = wa_cabecera
function = l_action
RESULT = l_result
TABLES
lines = i_comentarios
EXCEPTIONS
object = 1
id = 2
language = 3
name = 4
linesize = 5.
Si cambio los comentarios, actualiza comentarios
CASE l_action.
WHEN unchanged.
WHEN delete.
WHEN update OR
insert.
Agrega usuario y fecha del comentario
CONCATENATE sy-uname
sy-datum
INTO i_comentarios-tdline
SEPARATED BY space.
i_comentarios-tdformat = '*'.
APPEND i_comentarios.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
header = wa_cabecera
IMPORTING
newheader = wa_cabecera
TABLES
lines = i_comentarios.
ENDCASE.

Murugesh,
I believe that you have mis-read Gabriel's problem.
Gabriel,
The cursor is not positioning at the base of the editor as you have cited.
In order to get this functionality to work, you must set the LINE_EDITOR import paramter to 'X'.
data: hdr like THEAD.
data: l_itced like itced.
hdr-tdobject = 'VBBP'.
hdr-tdname = '4000029521000030'.
hdr-tdid = 'Z005'.
hdr-tdspras = 'E'.
hdr-TDLINESIZE = '100'.
hdr-TDTXTLINES = '3'.
l_itced-SCROLLEND = 'X'.
CALL FUNCTION 'EDIT_TEXT'
    EXPORTING
    DISPLAY             = ' '
    EDITOR_TITLE        = ' '
      HEADER              = hdr
    PAGE                = ' '
    WINDOW              = ' '
    SAVE                = 'X'
      LINE_EDITOR         = 'X'   " here !!!
      CONTROL             = l_itced
    PROGRAM             = ' '
    LOCAL_CAT           = ' '
IMPORTING
    FUNCTION            =
    NEWHEADER           =
    RESULT              =
    TABLES
      LINES               = lines
EXCEPTIONS
    ID                  = 1
    LANGUAGE            = 2
    LINESIZE            = 3
    NAME                = 4
    OBJECT              = 5
    TEXTFORMAT          = 6
    COMMUNICATION       = 7
    OTHERS              = 8
Don't forget those points !!

While doing MIGO transaction system showing error: Check table169P the entr

Hi experts,
while doing MIGO transaction system showing error: Check table169P the entry BP01 does not exit.
pls do needful.
Thanks&Regards
sreenivas.p

Hi,
Please specify Whether you are doing Blocking of Invoices or what?
As the T169P is A Parameters Invoice Verification, so you can check the values for T169P table in SE16 so that you will get Clear idea regarding company code BP01 in which the stochastic block is active with Threshold value for stochastic block...
Please check....
For maintaining Entries please go to OMRG maintain Company code and Threshold value as per client requirement so that This will specifies the degree of probability that an invoice is stochastically blocked.
Regards,
Ninad Kshirsagar

Position the cursor on an ENHANCEMENT statement .ED301

Hello Folks ,
I am changing an ENHANCEMENT and did a syntax check. the syntax check failed.
Editting is now locked out and when I place the cursor on the Enhancement statement and go to Edit > Enhancement Operations > Change Enhancement.
the "Position the cursor on an ENHANCEMENT statement" error statement appears even though the cursor was there.
I tried to "UNDO" the Enhancement So that I could put the correct code in. But,the same syntax error appears even though the bad code is not on the screen.
Has anyone else encountered this problem?

Hi Harel Gilor,
In that case you can delete/change that enhancement point by going to node Enhancements under your package name in SE80>Package>Enhacements.
Thanks & Regards,
Faheem.

How position the cursor in selected screen field insted of defualt field

Hi All,
Can you pls let me know , how to position the cursor in selected selection-screen filed. My requirement is i have 3 selection-screen fields, By default cursor is positioned on field screen field, but i want the cursor to be positioned at 3rd screen field to enter input, i want to do this coz i am filling first 2 screen fields with default values, so i need to position the cursor at 3 rd screen filed. let me know if it is possible to achieve this.
Thanks in advance.
Regards
Vishal

You will need to point it to the LOW field.
report zrich_0001.
tables: reguh.
select-options :
s_bukrs for REGUH-ZBUKR default 'US10',
s_laufd for REGUH-LAUFD default sy-datum,
S_LAUFI FOR REGUH-LAUFI .
at selection-screen output.
<b>set cursor field 'S_LAUFI-LOW'.</b>
Welcome to SDN! PLease be sure to award points for helpful answer and mark you post as solved when solved completely. Thanks.
Regards,
Rich Heilman

How can we position the cursor in Java?

how can we position the cursor in Java? Please help me.
and also provide me the list of threading practical question?

I am talking in context of console.Note that the console can be a number of things in Java; command shell, teletype, etc. You can use either JNI or a third-party library such as jcurses for this sort of thing.
~

I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

REGARDING position the cursor at the end of the field

i friends,
i have a field having length of 20 ,i need to place the cursor at the end of the filed means at the 20 th position the cursor must be there how will i acieve this...plz help me the value which i will pass to this field is may be of character 4 ,5 what ever but the cursor will be always at the 20th position or at the end of the filed plz help me.......

parameters:pa_str(20) type c default '11111111111111111111' .
initialization. .
Set cursor field 'PA_STR' offset 20.

To position the cursor

How to position the cursor at next item if i choose kod_kat_pkj = '2' then the cursor will go(jump to) to kod_ngra ( state)
Begin
--Job categories
     begin
          select initcap(nama)
          into :lmd_pmk_pkj.kod_kat_pkjn_d
          from lmd_ref_kat_kerja
          where kod = :lmd_pmk_pkj.kod_kat_pkjn;
     exception
          when no_data_found then
               :lmd_pmk_pkj.kod_kat_pkjn_d := '-Tiada-';
     end;
--Worker Categories
     begin
          select initcap(nama)
          into :lmd_pmk_pkj.kod_kat_pkj_d
          from lmd_ref_kat_pkj
          where kod = :lmd_pmk_pkj.kod_kat_pkj;
     exception
          when no_data_found then
               :lmd_pmk_pkj.kod_kat_pkj_d := '-Tiada-';
     end;
--State if imigran
     if :lmd_pmk_pkj.kod_kat_pkj = '3' then
          begin
               select initcap(nama)
               into :lmd_pmk_pkj.kod_ngri_d
               from lmd_ref_ngri
               where kod = :lmd_pmk_pkj.kod_ngri;
          exception
               when no_data_found then
                    :lmd_pmk_pkj.kod_ngri_d := '-Tiada-';
          end;
     end if;
--State
     if :lmd_pmk_pkj.kod_kat_pkj = '2' then
          begin
               select initcap(nama)
               into :lmd_pmk_pkj.kod_ngra_d
               from lmd_ref_ngra
               where kod = :lmd_pmk_pkj.kod_ngra;
          exception
               when no_data_found then
                    :lmd_pmk_pkj.kod_ngra_d := '-Tiada-';
          end;
     end if;
exception
     when others then
     call_alert('e_alt01','POST_QUERY LMD_PMK_PKJ : '||dbms_error_text);
End;

Post-Text-Item
if :lmd_pmk_pkj.kod_kat_pkj = '2' then
     go_item('lmd_pmk_pkj.kod_ngra');
elsif :lmd_pmk_pkj.kod_kat_pkj = '3' then
     go_item('lmd_pmk_pkj.kod_ngri');
else
     go_item('lmd_pmk_pkj.bil_pkj_l');
end if;
But why when i choose 2, the cursor not jump to next item kod_ngra.

Position the cursor at the top of the JTextArea?

How do you position the cursor or document at the top of the JTextArea. When I set the JTextArea to some text that exceeds the JTextArea ScrollPane it scrolls to the bottom of the document. How do you position the document to the top of the JTextArea?
thanks,
Peter

setCaretPosition(0);

How to position the cursor in File Name area in JFileChooser??

Hi,
I have been trying to position the cursor directly to filename area in JFileChooser. But no success.
It positions itself at the directory path by default.
How should I achieve this?
The problem is that I do not know the name of this
component used for File Name area hence difficult to
use "requestFocus() or getFocus()" like methods.
Thanks for your help.
-Manoj

Somewhere I saw a tip that explained how to do it, but I didn't keep a link to it. But basically it's like this: JFileChooser is a Container, so getComponent(n) will return the n-th component in the JFileChooser. One of them is the one you want to give the focus to, and I expect it will be a JTextField. A little experimentation should tell you which index you need to use.

Robot class and positioning the cursor

I have an application where I have a number of panels on the screen and using an editable field wish to enter coordinates to position the Cursor to on another panel.
ie, using grid coordinates on a map. Using the robot class I am able to position the cursor on the other panel but as soon as I move the mouse the cursor jumps back to the original position on the screen where the first panel with the editable field was. It is like only a picture of the cursor was drawn at the new coordinates and the real cursor is still at the old podition. It is important to this application that if the cursor is moved it stays where it has been moved to and actually is there and not just appearing to be there. I am using jdk 1.3 on Intel Solaris 2.8. Any help on this issue would be helpful and appreciated

Maybe you can use the mouse move event to position the mouse to where you had moved the cursor to.
for example
1.the mouse is at point 100,100
2. you move the cursor from your code to point 0,0
3. the user starts to move the mouse
4. you code gets that event and repositions the cursor to the last place where it was, that is at 0,0

Agent Assignment showing error "Please position the cursor correctly"

Similar Messages

Maybe you are looking for