REGARDING position the cursor at the end of the field

i friends,
i have a field having length of 20 ,i need to place the cursor at the end of the filed means at the 20 th position the cursor must be there how will i acieve this...plz help me the value which i will pass to this field is may be of character 4 ,5 what ever but the cursor will be always at the 20th position or at the end of the filed plz help me.......

parameters:pa_str(20) type c default '11111111111111111111' .
initialization. .
Set cursor field 'PA_STR' offset 20.

Similar Messages

Firefox4 on ubuntu, after awhile when I click on bookmarks and then move the cursor down to a bookmark, the list of bookmarks disappears. A stop and start of firefox4 fixes the problem but what is the long term fix?

I upgraded to 4 and I noticed that after 4 has been up for an hour or so I click on the bookmarks. I see my list of bookmarks below but when I move the cursor down to select one, the list disappears.
The only way I have found to fix this is to stop and start 4. I can then move the cursor down to select a bookmark. This problem has not occurred in previous versions.
ps.. no '''''delicious''''' installed

No, I see the three areas at the bottom of the Bookmark area that you refer to, but that also highlights an issue. When I want to save a story to my Reading List and click on Share then "Add to Reading List" then go back to look at what is stored in the Reading List, my recently-saved item is not there.
I looked thru the History tab and the Reading List tab and have been in the Bookmark tab. But even when I Save a Bookmark, that newly-saved Bookmark does not show up in the Bookmark area.
But then again, the next day (and actually just in the last half-hour) all of the functionality came back. When I look at the Bookmarks, suddenly, again, all of the Bookmarks that are on my Safari browser on my iMac are now there, and I can now Save a Bookmark.
It keeps coming in and out and that is what is driving me a little nuts.
Thanks.

Why is the cursor jumping down to a different field?

I am working in Acrobat Pro 9. I actually have two slightly different senerios.
First: I have two Textbox fields in my document that are named the same so that the second will auto-fill when the first is filled in. They are set to mm/dd/yyyy.
When the first is filled out without using the /'s, an error appears that the user did not use the proper format. When I click the button on the error window, my cursor is sent to the second textbox instead of remaining in the first.
Secondly: This is a similar problem.....Again I have two textboxes that have the same name...for the same reason. I have javascript attached to the first that will display an error if it is left blank and then uses a setFocus() to place the cursor back into the textbox. When the first textbox is left blank and triggers the error, the cursor is then forced to the second textbox of the same name.
Does anyone know what I need to do in order to have the cursor remain in the first textbox?
Thank you for any help that you can give.
Rick

For your first question, I think that's normal, though I suppose it could be considered a bug. The focus gets set to the first widget (#0).
For #2, when you use the getField method, you can specify a particular widget. For example, if you have two widgets of a field named "text1", you can do:
// Set focus to first widget (#0)
getField("text1.0").setFocus();
// Set focus to second widget (#1)
getField("text1.1").setFocus();

Photoshop brush strokes are smaller than the cursor, need to make them the same.

My photoshop brush, pencil and Clone strokes are smaller than the cursor, which makes it very difficult for accuracy. Don't know what made them change, but want the cursor and stroke to be the same.
I've tried different settings in the brush dialog box, with differenc tip settings, etc, with no results. Also, tried different settings in Preferences/Cursor setting. No luck.
Help!

<<<<
Under Preferences (cmd k) > Cursors > Painting Cursors, the setting should be Normal.
Usually "Reset Tools" as described in post 1 helps. Have you tried it yet?
Gene<<<<<<
Gene,
Yes, I've tried that, and all the variations on that page, without success.
Larry

How do I uninstall once the trial period has ended? The instructions say to de-activate the software, but the only option I am given is to enter a serial number. Thank you

How do I uninstall once the trial period has ended? The instructions say to de-activate the software, but the only option I am given is to enter a serial number (I can't get to a place where I can go to help and de-activate).. Thank you

Mobriennc which operating system are you using? Which Adobe software title are you currently evaluating?

After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

Hi do someone now how to fix this "when i press Tab button on the keyboard the cursor don't move to the next string control"

When i press Tab button on the keyboard the cursor don't move to the next password control. i have simple login dialog in web ui builder.
When i run the vix i need to press two times Tab to move from username string control to the next password "password control" my Tab index for the username
control is "1" and for the password is "2' and i try to use all of the 3 options for TabNavigation Local, Cycle and Once and noone work.
Thanks

I attached one simple example of the issue.
Thanks for the Reply.
Attachments:
Login Dialog.zip ‏2 KB

How can I stop the cursor from being dragged outside the bounds of an intensity graph in LV 7.1?

Currently, an intensity graph cursor can be dragged outside the graph bounds, and the cursor position continues to change as if the graph had no bounds.

You can maintain the cursor (and the graph scales...) between defined boundaries programmatically, using an attribute node. Not a very elegant solution, since there is some quivering. See the example.vi.
Of course, if the user need to modify the scales (zoom in/out...), there will be some additional work ! :-)
Hope this help.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Bound_cursor.vi ‏51 KB

L need help with textedit, I inserted a picture then the cursor went from small to the size of picture and l need to write a header next to the picture not at the bottom of it. can anyone help please?

Can anyone tell me how to make cursor smaller after inserting picture so that l can add somethimg right next to it instead of bottom of picture. Meaning the next line is too low

AFAIK, you can't. The nature of TextEdit is that it allows the picture to be treated as a character and adjusts the cursor size for that line.
You need a app that supports transparent overlays.

The cursor no longer blinks in the Save As dialogue box, so how can I toggle the setting for it?

I have been unable to make the cursor blink again through tinkering with the settings of about:config
== This happened ==
Every time Firefox opened
== In late June

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

The cursor cannot be placed on the text at the bottom of the page

I have a very long document that I'm working on. The latter pages are behaving strangely. When I scroll down big blocks of grey appear between pages, when I try to place the cursor on a line of text at the bottom of the page it simply won't stick.

I am not sure what the problem is but it is something being reported by others.
Personally I do not trust longer documents in Pages, it may be advisable to break them up into smaller documents and simply continue the page numbers on in subsequent document.
Peter

The scroll bar stops moving with the cursor after the frist inch or so down the page, even though the cursor keeps moving as does the page itself.

This problem started about 4-5 days ago.
After i scroll down a bit on a longer page, the scroll bar is still near (not at) the top. The page is scrolling at that point based only on me continuing to move the cursor in the scroll bar vertical column - even though not in line with the actual scroll bar itself. Then when I put the cursor on the actual scroll bar the page jumps back up to near the top of the page.
Thanks for any help.

Are you using code in userContent.css or Stylish?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
Firefox Safe mode also disables the customizations in the userChrome.css and userContent.css files.
See also:
*[https://bugzilla.mozilla.org/show_bug.cgi?id=787465 bug 787465] - scrollbars don't update sometimes

Started on V15: selecting a field with prefilled text, the cursor is always BLACK vs. the text color, so if field happens to be black... the cursor is invisible

see what i mean on keystone.skyrun.com. click on the search box (right, just below the top) that has the prefilled in text 'search...'.
cursor is there, but virtually invisible until you start typing. this works fine on ff v14- or all versions of ie.

I added a comment on this bug with a link to this thread:
'''Bug 769405 No caret appears in an empty <input> if placeholder is defined'''<br>
https://bugzilla.mozilla.org/show_bug.cgi?id=769405#c14

Moving the cursor in a graph beyond the XY boundaries

Hi All,
I have graphs with many plots.
Suppose one of my plots is on the topmost portion of the graph.
The user is able to scroll thsough the graph so that sometimes some of the plots go beyond the visible portion of the graph.
I want to know how can i limit the graph scrolling beyond the area the plots reside.
The graph consists of all the plots in the visible area when its loaded.
But if the user scrolls the graph beyond ther limits some plots go beyond the visible portion.
What is the solution for this problem?
Is there any way like lock the graph if the usder scrolls beyond the boundaries?

Right click the graph and uncheck "Advanced>>Cursors Scroll Graph".
Try to take over the world!

When I use the arrow keys in firefox to go forward and back, the cursor erases tiny bits of the letters.

Even within this text field as I type, all is normal, but backspacing using the arrow keys (and then also forward spacing using the arrow keys as I return to typing) erases bits of the text. Once I begin typing again in this field, the erased components restore to normal. This effect can be captured in a screenshot. Upon closer inspection, there appears to be a second invisible cursor, one full character to the right of the visible cursor. So when arrow backspacing, the invisible cursor trails the visible one, wrecking the text behind. When forward spacing using the arrow keys the text gets wrecked in front of the visible cursor.

I am guilty of not following up. The above solution "appeared" to work for me until I realized that now, the text does not erase bits on the same line as my cursor but erases any text on the line below my cursor... so if I am typing above other text, these semi-invisible marks chop up the text below where I am backspacing. Yes, I know - put this in David Letterman's, "Museum of the hard to believe".

Why the cursor changes only after moving the mouse?

I have used the setCursor() on a JInternalFrame to change the image of the cursor. I change the cursor to Cursor.WAIT_CURSOR and back to Cursor.DEFAULT_CURSOR in a new thread. Then the only way for the cursor to change from WAIT to DEFAULT is to move the mouse, otherwise it will remain in WAIT status. What's going wrong?

I am using version 1.1.2 in JBuilder1. I have an extended Dialog as an interface to change the Oracle Password. When the OK button is selected to complete the process of accessing the DB to make the change, I change cursor to the wait cursor before the DB is accessed. I have to move the mouse to trigger the cursor change to wait. I would think there would be an efficient way to do this. I would also appreciat some help. I'm not sure if this is a problem in later versions.
Thanks,
Mike

REGARDING position the cursor at the end of the field

Similar Messages

Maybe you are looking for