Aggregates suggested by system
Hi,
I have 200-odd aggregates proposed by system when I asked for suggestions for an infocube for specific period for queries that ran over 300 seconds. I did this in production environment. Out of that 200+ aggregates 2 has usage over 800, 3 more have usage over 500 and 3 more have usage 300.
I also checked optimum aggregate suggested by the system. 5 such aggregates were suggested. They are different from those I mentioned above.
My question is,how many aggregates should I build on a cube? Also, to build aggregates what should I consider as more prudent system recommendation - the one with higher usage or the one told as optimum? Should I build 8 aggregates that have usage over 300 or should I just build 5 optimum aggregates proposed?
Help will be appreciated
Thanks
Shankar,
As a thumb you can go for 5 optimum aggregates proposed.
As a most prudent practice, you can create your own aggregates based upon your query designs. I would recommend you to build aggregates based upon the queries on the infocube. This will reduce the disk space and maintainance efforts.
http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Similar Messages
-
Aggregates in Production System and Change Run Hierarchy
Hi All,
Can anybody tell me, Why should we create Aggregates in Production System nd How?
What is Change Run Hierarchy nd How to perform this?
Reply back me to [email protected]
Regards,
KiranHi Kiran,
Aggregates are nothing but a subset of your Infocube... when a query is executed, it firstl looks for the presence of the data in your aggregates and if found then it fetches the reocrds from there itself.. Else not, it'll search teh entire infocube and then fetch the records which is at a high risk of time consumption and the performance of the Query execution slows down or becomes worse significantly.. for this purpose, you build aggregates.. how do you decide whether you should go for aggregates or not is based on the following criteria...
if the %Data Base time is > 30% and if the KPI ratio (selected to transferred records) is > 10, then you go for the aggregates... you can get these details in the ST03N transaction by choosing Expert mode and selecting BI Workload... you can find all the statistics related to the Query execution starting from the front end time to db time/...
thats all about your aggregates...
Attribute or Hierarchy change run is done so that any changes to your Master data Attributes will have to get effected in terms of your reporting...
say for eg.. ur name is XYZ and loc is in India.. this is how it'll be reflected in your reporting also.. but at a later point in time, if you have changed your location from India to Europe, then for that to be reflected in your reporting, you'll have to perform an Attribute change run for that Characteristic...
Hope it solves your issue..
Regards
Manick -
Need new PC - Suggestions for system requirements needed!
Hello!
I am taking a class in CS4 Design Premium and will be purchasing the software as soon as I buy a new computer. I've been looking into an Acer or HP Desktop PC (<$700) with the following minimum requirements:
4GB RAM
2.0GHz processing speed
500GB hard drive
I've read the Sticky posted on this site regarding graphics cards compatible with CS4, but I'd really appreciate suggestions from the users. What do you feel is the best system to purchase for a new web designer? Are there other components I should be concerned about?
I truly appreciate any and all input
LynnYou could buy a used printer on ebay, the models here support the HP 02 cartridges:
Compatible printers (released since July 2005)
» HP Photosmart 8200 Printer series
» HP Photosmart D7100 Printer series
» HP Photosmart D7200 Printer series
» HP Photosmart D7300 Printer series
» HP Photosmart D7400 Printer series
» HP Photosmart 3100 All-in-One series
» HP Photosmart 3200 All-in-One series
» HP Photosmart 3300 All-in-One series
» HP Photosmart C5100 All-in-One series
» HP Photosmart C6100 All-in-One series
» HP Photosmart C6200 All-in-One series
» HP Photosmart C7100 All-in-One series
» HP Photosmart C7200 All-in-One series
» HP Photosmart C8100 All-in-One series
With a page printing volume of only fifty pages a week a CIS system may be overkill. I print about that on my Officejet 8600 Plus and have only replaced the cartridges once in eighteen months.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Fixing at aggregate level & unfixing at detailed level.
Hi,
Our requirement is as given below......
Our Demand Planning Process is Top-down process. Head Quarter will enter the demand at Territory, Channel and Product Group Level. These values are fixed and gets disaggregated to further planning level based on historical sales. The further planning levels are Sales Officer, Location & Product. Territory Manager can change the demand with in his targets across Sales officers (i.e. he should be able to change the targets of Sales officers without exceeding or reducing the Territory targets).
Can anyone suggest how to fix the keyfigures at Aggregate Level without fixing it at detailed level. We tried FIX_CALC macro, but could not resolve the issue.
Thanks in advance.
SPYou need to create AGGREGATES in your PLANNING OBJECT STRUCTURE, right click on POS and create the following aggregates
(1) ALL TERRITORY characteristics
Now you will be able to fix at the top level and still be able to change at the detailed level.
Read the following:* Let me know if you have any questions*
Aggregate
Definition
The aggregates in APO are not the same as those in the Business Information Warehouse (BW), but they have the same purpose: to speed up data access and therefore increase performance. SAP recommends that you use aggregates in Demand Planning.
These aggregates are sometimes referred to as persistent aggregates, in particular when talking about detail and aggregate levels in interactive planning.
Use
An APO aggregate contains a subset of the characteristics in the master planning object structure. The creation and use of aggregates is optional. The data is always saved on the lowest level of detail. If aggregates exist, the system saves the planning data on the defined aggregate levels as well as on the lowest level of detail. The data is saved twice, but consistently; that is, the sum of the details equals the aggregate value.
SAP recommends that the aggregates you build in APO for planning data also exist in BW for actual data.
If you want to save fixed values at aggregate level ; that is not at detail level of the master planning object structure, in a planning book, you must create aggregates for this level. Otherwise the data is only saved at detail level.
You cannot form aggregates for navigational attributes
See also:
Fixing Key Figure Values
Aggregates are discussed in detail in OSS note 503363. SAP recommends that you read this note thoroughly before configuring your master planning object structures and aggregate hierarchy. -
Hi
I'm looking for some general information of aggregate in BW server. Our BW application team is facing some performance problem while executing queries. As per my knowledge, aggregate need to be created for infocube and queries to resolve this problem. I checked the system and right now, no aggregates has been created in our BW server. I have some following questions to clear:
1. How to find out that aggregate is required in system for infocube and queries? I checked all infocube with "Automatic Proposal by System for Aggregate (RSDDV)" and aggregate need to be requied as per system proposal. Same result i got for queries. Is it the right way to find out the requirment of aggregate in BW system? Pls confirm or suggest if there is any other way.
2. Do aggregate help to resolve the performance problem of queries?
3. As per my knowledge, Queries can execute on infocube, ODS (or any inforprovider). But aggregate can only be created on the basic cubes (not on ODS, multiprovider, remote cube and infoset). Pls confirm.
4. What is the difference between infoprovider and infocubes/ODS?
5. what would be another impact on the BW server, if there are no aggregate?
and if there is any document that help me to solve the slow performance of queries, pls suggest or pass it to me.
Thanks
AmarHi
Thanks Rishi, Naren and Balaji for help to understand the aggregate concept. I have read the link, Balaji has suggested.
I'm still working on it and trying to get some more information.
1. How many queries run on daily basis and how many queries run in parallel. Is there way to find out it? I checked with table 'RSDDSTAT' and it is hard to understand from there. I don't understand the starttime format '20.080.730.140.839,1668870'. I try with 'RSRT' and got the following information:
STATUID -
> 4ANJOK50HR3QGQ0P7JSI14QWA
SESSIONUID -
> 4ANJOKCP0PPFZCK5DDUUB6PM2
NAVSTEPUID -
> 4ANJOKKDJOB5HZ3LJ7X6L8OBU
INFOCUBE -
> 0COOM_C02
HANDLE -
> 1
QUERYID -
> 0COOM_C02/Y_0COOM_C02_QW003
UNAME -
> NAGI_A
QNACHLESEN -
> H
OLAPMODE -
> 1
QRUNTIMECATEGORY--> 5
QNAVSTEP -
> 3
QNUMOLAPREADS ---> 1
QDBSEL -
> 229.497
QDBTRANS -
> 3.819
QNUMCELLS ---> 3.156
QNUMRANGES --> 72
RECCHAVLREAD --> 264
QTIMEOLAPINIT ---> 0,214844
QTIMEOLAP -
> 0,414064
QTIMEDB -
> 3,191406
QTIMEVARDP -
> 1,589844
QTIMECLIENT -
> 0,062500
TIMECHAVLREAD --> 0,144532
TIMEREST -
> 1,660156
DMTDBBASIC -
> 3,125000
STARTTIME -
> 20.080.730.140.839,1668870
is there any link to understand all these above mentioned parameter?
2. I have checked in our system that some of queries access the data from ODS instead of infocube. Is there any benefit to run the queries in ODS instead of infocube? In our company, BW application team execute one query to access the data from ODS. I don't know the reason for it.
3. With 'RSRT', we can execute performance information for infocube. is there any tcode or tool to check the performance of queries that access the data from ODS?
Thanks
Amar -
How to work on Recommendations based on Health Check suggested by SAP
Hi GURU's,
My client has already implemented BI 7.0 and they have undergone a health check done by SAP.
And they wanted me to give my recommendations on that and I have done so.
But now, they would like to see a bit more detail on my recommendations. In particular, they want me to provide system related information on the following questions raised by them:
1. To identify the unwanted/unused aggregates or weak aggregates in the system and need to delete them. We also need to create or maintain few aggregates based on our requirement to improve the report performance.
2. To use OLAP Cache mode 1. Do all our queries use this cache mode or just some ? Can we change it globally to affect all queries and how big should our cache table be ?
3. Need to implement the Parameter settings suggested by SAP.
4. The ratio of number of entries in the dimension tables to fact tables should be reasonable. Please pass on details of this against cubes against the ZMPA1, ZMDSF1, ZMPCA1 multicubes.
The above recommendations were provided by me to the client based on the health check done by SAP. And I would like to know, how can I get the information required byt he client???
They are also looking at caching some commonly used reports and want to knowif I am able to provide them with information regarding the Top 20 queries used in the system per week, by multicube. The aim is to pre-calculate these queries at night to help with the user experience. Statistics are turned on in BWP.
Thanks and regards,994418 wrote:
forms6i
Hi to all
the requirment the we have already master detail form.example emp details based on the dept number.in the form just only displays three coloumns per record wise(emp details).
actually my requrment is place the check box each record and place a one button in the form.once check the particular record and click on the button open the another form
it's displays that particular record entire emp details.any one help me...........
Edited by: 994418 on 3 Apr, 2013 1:50 AMHi,
As you said, you emp block is tabular, i think there is no need of check box. Just add a button in that block. So there is a button for each record and associate button click display the associate record details (you said to go another form and display)
check this Calling a form and passing a context
Hope this helps
Hamid
Mark correct/helpful to help others to get right answer(s).* -
System.Exception: null or empty values
Have designed a 4 part form Using DW MX, ASP.NET C# and MySQL
and currently getting the below error when moving from one page to
the next.
The web.config file is on the server, there are no null or
empty values, and the key tags match.
I am new to applicaiton development in DW and am now stuck -
any suggestions?
System.Exception: This page has a MM:DataSet, MM:Insert,
MM:Update or MM:Delete tag with a null or empty value for the
ConnectionString and DatabaseType attributes.
Often, such values come from application settings in the
web.config file. That file might be missing from the server
executing this page. Or, it might be missing the particular add key
tags for the database connection this page uses. If you are using
Dreamweaver, look for the web.config file in the local root folder
of your Dreamweaver site. Once you find this file, you can either:
Put this file onto the server that is executing this page.
Copy the add key tags from the web.config in the local root
folder of your Dreamweaver site and paste them into the web.config
file in the server that is executing this page.
at DreamweaverCtrls.DataSet.DoInit()
Texthttp://java.sun.com/docs/books/tutorial/uiswing/components/spinner.html#model
Might be a good start. -
System/Query Performance: What to look for in these tcodes
Hi
I have been researching on system/query performance in general in the BW environment.
I have seen tcodes such as
ST02 :Buffer/Table analysis
ST03 :System workload
ST03N:
ST04 : Database monitor
ST05 : SQL trace
ST06 :
ST66:
ST21:
ST22:
SE30: ABAP runtime analysis
RSRT:Query performance
RSRV: Analysis and repair of BW objects
For example, Note 948066 provides descriptions of these tcodes but what I am not getting are thresholds and their implications. e.g. ST02 gave tune summary screen with several rows and columns (?not sure what they are called) with several numerical values.
Is there some information on these rows/columns such as the typical range for each of these columns and rows; and the acceptable figures, and which numbers under which columns suggest what problems?
Basically some type of a metric for each of these indicators provided by these performance tcodes.
Something similar to when you are using an Operating system, and the CPU performance is consistently over 70% which may suggest the need to upgrade CPU; while over 90% suggests your system is about to crush, etc.
I will appreciate some guidelines on the use of these tcodes and from your personal experience, which indicators you pay attention to under each tcode and why?
Thankshi Amanda,
i forgot something .... SAP provides Early Watch report, if you have solution manager, you can generate it by yourself .... in Early Watch report there will be red, yellow and green light for parameters
http://help.sap.com/saphelp_sm40/helpdata/EN/a4/a0cd16e4bcb3418efdaf4a07f4cdf8/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f35bf3-14a3-2910-abb8-89a7a294cedb
EarlyWatch focuses on the following aspects:
· Server analysis
· Database analysis
· Configuration analysis
· Application analysis
· Workload analysis
EarlyWatch Alert a free part of your standard maintenance contract with SAP is a preventive service designed to help you take rapid action before potential problems can lead to actual downtime. In addition to EarlyWatch Alert, you can also decide to have an EarlyWatch session for a more detailed analysis of your system.
ask your basis for Early Watch sample report, the parameters in Early Watch should cover what you are looking for with red, yellow, green indicators
Understanding Your EarlyWatch Alert Reports
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b88cb90-0201-0010-5bb1-a65272a329bf
hope this helps. -
Facing issue in suggested meeting time in ews-java-api
Hi,
I have a meeting room id , and i want to get Free and Busy schedule of the meeting room , below is the code i am using
List<AttendeeInfo> attendees = new ArrayList<AttendeeInfo>();
attendees.add(new AttendeeInfo([email protected]));
SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
Date startDate = formatter.parse("2015-03-03 00:00:00");
Date endDate = formatter.parse("2015-03-05 00:00:00");
// Call the availability service.
GetUserAvailabilityResults results = exchangService.getUserAvailability(
attendees,
new TimeWindow(startDate, endDate),
AvailabilityData.FreeBusyAndSuggestions);
// Output attendee availability information.
int attendeeIndex = 0;
for (AttendeeAvailability attendeeAvailability : results.getAttendeesAvailability()) {
System.out.println("Availability for " + attendees.get(attendeeIndex).getSmtpAddress());
//if (attendeeAvailability.getErrorCode() == ServiceError.NoError) {
for (CalendarEvent calendarEvent : attendeeAvailability.getCalendarEvents()) {
System.out.println("Calendar event : "+ calendarEvent.getFreeBusyStatus().toString());
System.out.println(" Start time: " + calendarEvent.getStartTime().toString());
System.out.println(" End time: " + calendarEvent.getEndTime().toString());
if (calendarEvent.getDetails() != null)
System.out.println(" Subject: " + calendarEvent.getDetails().getSubject());
// Output additional properties.
attendeeIndex++;
for (Suggestion suggestion : results.getSuggestions()) {
System.out.println("Suggested day: " + suggestion.getDate().toString());
//System.out.println("Overall quality of the suggested day: " + suggestion.getQuality().toString());
for (TimeSuggestion timeSuggestion : suggestion.getTimeSuggestions()) {
System.out.println("Suggested time: " + timeSuggestion.getMeetingTime().toString());
// Output additonal properties.
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
I am getting output like,
Calendar event : Busy
Start time: Tue Mar 03 10:00:00 GMT+05:30 2015
End time: Tue Mar 03 17:00:00 GMT+05:30 2015
Calendar event : Busy
Start time: Wed Mar 04 12:00:00 GMT+05:30 2015
End time: Wed Mar 04 13:00:00 GMT+05:30 2015
Calendar event : Busy
Start time: Wed Mar 04 13:00:00 GMT+05:30 2015
End time: Wed Mar 04 18:30:00 GMT+05:30 2015
Suggested day: Tue Mar 03 00:00:00 GMT+05:30 2015
Suggested time: Tue Mar 03 17:00:00 GMT+05:30 2015
Suggested time: Tue Mar 03 17:30:00 GMT+05:30 2015
Suggested time: Tue Mar 03 18:00:00 GMT+05:30 2015
Suggested time: Tue Mar 03 18:30:00 GMT+05:30 2015
Suggested time: Tue Mar 03 19:00:00 GMT+05:30 2015
Suggested time: Tue Mar 03 19:30:00 GMT+05:30 2015
Suggested time: Tue Mar 03 20:00:00 GMT+05:30 2015
Suggested time: Tue Mar 03 20:30:00 GMT+05:30 2015
Suggested time: Tue Mar 03 21:00:00 GMT+05:30 2015
Suggested time: Tue Mar 03 21:30:00 GMT+05:30 2015
Suggested day: Wed Mar 04 00:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 05:30:00 GMT+05:30 2015
Suggested time: Wed Mar 04 06:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 06:30:00 GMT+05:30 2015
Suggested time: Wed Mar 04 07:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 07:30:00 GMT+05:30 2015
Suggested time: Wed Mar 04 08:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 08:30:00 GMT+05:30 2015
Suggested time: Wed Mar 04 09:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 09:30:00 GMT+05:30 2015
Suggested time: Wed Mar 04 10:00:00 GMT+05:30 2015
In the above output, for the corresponding date Mar 03, it is showing busy time correctly, but in the suggested time which is free , it is showing until 21.30 only, it need to showed until 23.30 as that also a suggested time which is free, Similarly, in
next day ie. Mar 04, it shows busy time correctly, but suggested time which is free is shown until 10:00 am only, why it is not showing after 10 am. Please help me to solve this issue and how to proceed further to show the remaining free meeting time also.
Thanks,
Akshea.Hi Jason,
Thanks for your response, your answer works ,i gave max. number of suggestions per day as 48, but i have a doubt,
Suggested day: Wed Mar 04 00:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 11:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 18:30:00 GMT+05:30 2015
Suggested time: Wed Mar 04 19:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 19:30:00 GMT+05:30 2015
Suggested time: Wed Mar 04 20:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 20:30:00 GMT+05:30 2015
Suggested time: Wed Mar 04 21:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 21:30:00 GMT+05:30 2015
Suggested time: Wed Mar 04 22:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 22:30:00 GMT+05:30 2015
Suggested time: Wed Mar 04 23:00:00 GMT+05:30 2015
Suggested time: Wed Mar 04 23:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 00:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 00:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 01:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 01:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 02:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 02:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 03:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 03:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 04:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 04:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 05:00:00 GMT+05:30 2015
Suggested day: Thu Mar 05 00:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 05:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 06:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 06:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 07:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 07:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 08:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 10:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 10:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 11:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 11:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 12:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 12:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 13:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 13:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 14:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 14:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 15:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 15:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 16:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 16:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 17:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 17:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 18:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 18:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 19:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 19:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 20:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 20:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 21:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 21:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 22:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 22:30:00 GMT+05:30 2015
Suggested time: Thu Mar 05 23:00:00 GMT+05:30 2015
Suggested time: Thu Mar 05 23:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 00:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 00:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 01:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 01:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 02:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 02:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 03:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 03:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 04:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 04:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 05:00:00 GMT+05:30 2015
Suggested day: Fri Mar 06 00:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 05:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 06:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 06:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 07:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 09:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 09:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 10:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 10:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 11:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 11:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 12:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 12:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 13:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 13:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 14:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 14:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 15:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 15:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 16:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 16:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 17:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 17:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 18:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 18:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 19:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 19:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 20:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 20:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 21:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 21:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 22:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 22:30:00 GMT+05:30 2015
Suggested time: Fri Mar 06 23:00:00 GMT+05:30 2015
Suggested time: Fri Mar 06 23:30:00 GMT+05:30 2015
Suggested time: Sat Mar 07 00:00:00 GMT+05:30 2015
Suggested time: Sat Mar 07 00:30:00 GMT+05:30 2015
Suggested time: Sat Mar 07 01:00:00 GMT+05:30 2015
Suggested time: Sat Mar 07 01:30:00 GMT+05:30 2015
Suggested time: Sat Mar 07 02:00:00 GMT+05:30 2015
Suggested time: Sat Mar 07 02:30:00 GMT+05:30 2015
Suggested time: Sat Mar 07 03:00:00 GMT+05:30 2015
Suggested time: Sat Mar 07 03:30:00 GMT+05:30 2015
Suggested time: Sat Mar 07 04:00:00 GMT+05:30 2015
Suggested time: Sat Mar 07 04:30:00 GMT+05:30 2015
This is my output,
i gave start date from 04-Mar-2015 and end date 07-Mar-2015, so it shows me the meeting suggestion time from 04-Mar to 06-Mar till 23.30, that is fine, but for 07-Mar, it just shows first 10 meeting time only till 4.30 only, y so, on 07-Mar-2015 also it
should give time till 23.30 . right. -
Help! I am trying to export my show and commercials from the timeline. Both Share and Send to compressor are not working.
Its starts compressing then I get Failed"Quicktime Error -50". I appreciate any suggestions.
SYSTEM INFO
Model Name: Mac Pro
Model Identifier: MacPro5,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.4 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per core): 256 KB
L3 Cache (per processor): 12 MB
Memory: 10 GB
Processor Interconnect Speed: 5.86 GT/s
Boot ROM Version: MP51.007F.B00
SMC Version (system): 1.39f11
SMC Version (processor tray): 1.39f11First try exporting a self-contained movie from FCP, the using the resulting file in Compressor. To do it, go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion). In the export window, check the self-contained option but do not "recompress all frames."
Once the export is finished, launch Compressor then use the self-contained file as the source. If that fails, you may want to try using theis: http://www.digitalrebellion.com/compressorrepair/
-DH -
DEFAULT_TEMP_TABLESPACE=SYSTEM, is this good practice
version 9208, db size 1139 gb
We have performance issue on this db all the time , it has 5 temp tablespaces , different users using different temp tablespaces. any suggestion?
SQL> select * from database_properties where property_name='DEFAULT_TEMP_TABLESPACE';
PROPERTY_NAME
PROPERTY_VALUE
DESCRIPTION
DEFAULT_TEMP_TABLESPACE
SYSTEM
ID of default temporary tablespace
Edited by: DBA2008 on Jan 27, 2010 4:34 PMThat what i am going to suggest, currently system is default temp tablespace , make temp as default and shift all user there. we have performance issue on this db all the times. any suggestion?
SQL> select temporary_tablespace, count(*) from dba_users group by temporary_tablespace;
TEMPORARY_TABLESPACE COUNT(*)
SYSTEM 11
TEMP 9046
TEMP2 1
TEMP3 2
TEMP5 4
SQL>select PROPERTY_VALUE from database_properties where property_name='DEFAULT_TEMP_TABLESPACE';
PROPERTY_VALUE
SYSTEM
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP;
SQL> select USERNAME, TEMPORARY_TABLESPACE
2 from dba_users
3 where TEMPORARY_TABLESPACE='SYSTEM';
USERNAME TEMPORARY_TABLESPACE
TRACESVR SYSTEM
U008906 SYSTEM
EDA SYSTEM
U008157 SYSTEM
U004343 SYSTEM
UE00945 SYSTEM
U004507 SYSTEM
AKARMAKAR SYSTEM
U029604 SYSTEM
U007820 SYSTEM
U023110 SYSTEM
11 rows selected.
ALTER USER <username> TEMPORARY TABLESPACE TEMP; -
How do I change which programs start when the system boots up?
I want to delete a program from the start up sequence so that the program does not start up automatically. Suggestions!
System Preferences - Users and Groups - Login Items - highlight the one you don't want to start up and hit the minus sign.
-
Diagnostics Agent installation - which SID for the systems in your landscap
Hi,
I have a question in regads to installing the Diagnostics Agent on the systems in your landscape: ie. I want to install the Diagnostics Agent on all systems, and SAP suggests the system ID "DAA" as standard sid. From my experience there are no errors or exceptions when I use the system id DAA for a few or all systems.
However, will I run into problems later on (for example, when using root cause analysis, etc.)? Can I use the standard system id DAA for several systems/hosts, or should I use a seperate system ID (DAA, DAB, DAC, etc.) for each Diagnostics Agent?
thanks,
WalterHi,
We have used same SIDs (the default DAA) for a few hosts in our landscape and this did not cause a problem.
But in my opinion best to use DAA, DAB, DAC etc in order to remove any room for confusion for both the humans and the systems
Regards,
Srikishan -
How to find aggregates which are not used.
Hi ,
There are lot of aggregates in my system , so i should deactivate the aggregates which are not used from long back. so how to find out all those , can u plz guide me ,You can also check the usage column of the aggregates. If usage value is high then the aggregate is used very frequently.
If there is no value at the last used then the aggreagete is not used at all.
Hope it helps
Regards
Sadeesh -
Hello, have a look at the topic, is there anybody out there able to give me any suggestion?
System requirements
Linux® or Microsoft® Windows Server® (32 bit or 64 bit)
1GB of available RAM
50MB of hard-disk space for the services and assets; 2KB of additional disk space per each fulfillment for transaction logging
Microsoft SQL Server 2005 or later, MySQL 5 or later, and Oracle 10 or later are supported
Java™ Runtime Environment 1.7
Servlet engine
SSL client (for communication with signing server)
Maybe you are looking for
-
HELP...I just upgraded to 10.6.7 and now my Appleworks drawing program is slow - beach balls all the time, I can not copy into other programs, copy and paste messes with the formatting, fills and lines disappear, Fonts are messed up when copied...ON
-
How do i watch tv shows after i purchase them, i can only view 30 second videos
how do i watch tv shows after i purchase them on itunes, i can only view 30 second video?
-
Bapi BAPI_PRODORDCONF_GET_TT_PROP
Hi, how can I use this function module (PRODORDCONF_GET_TT_PROP) to post also the standard times in the confirmation? Many thanks. Luca
-
How can I get operating system's information ?How can I code it in java?
-
Satellite L650D-10J - Windows 7 won't start
Hi, I have a Toshiba Satellite L650D-10J, Windows 7 64Bit, 4GB RAM and it won't start Windows 7. It starts and then you see Toshiba logo startup etc. and then it goes to black and it loads up Windows Bootmanager with the following message ; +A proble