Aggregator not binding files
Needing help again. This time I'm going back to my old problem about the Aggregator. I have these three lessons that I want to bind together because I have quizzes in each of them. ( I don't have SCORM Packager and the other binder program have not work) So... When I was using the Aggregator to bind my files that is up until today it was working fine. It would bind my files together with a TOC on the side and it would go from one slide to the next no problem. Now it still does the same thing except when I run it from the Aggregator (publish) the TOC does not appear for the second and third lessons but the lessons continue in a very wonky sort of way.
Then I inserted all of the necessary files into Moodle - Moodle allows me to run the first lesson but kicks me out after the first lesson is over. It takes me to the Moodle landing page. So first this morning everything was working fine - it wasn't until I changed the names of my files that things got broken - the only thing I did different was I renamed my files i.e. my three lessons and made a new aggregator file so that they would have appropriate names displayed when the lessons were being played.
I put the following files into Moodle
Health Center Prog.agg
Health Center Prog.htm
Health Center Prog.swf
Intro to HC,swf
History of HC.swf
Prog Req.swf
Any idea on what I could have done to make the lessons stop playing and now kick me out of the lesson and throw me to the Moodle landing page.
Im using Captivate 6 on a Mac.
Please please please anything you can suggest would be helpful.
Thanks in advance.
Maree
I don't honestly believe Storyline is going to solve this particular problem for you. It doesn't have either an Aggregator app or a Multi-SCORM Packager app like Captivate offers. The reason your content wasn't working before was due to your changing the names of the files and breaking the links. That would happen in Storyline as well.
By the way, you have shown the published file names in one of your original posts as having spaces in the names:
Health Center Prog.agg
Health Center Prog.htm
Health Center Prog.swf
Intro to HC,swf
History of HC.swf
Prog Req.swf
Please be aware that when publishing content to a web server for delivery over an intranet or the internet you should NOT have spaces in the names as this can also break links. Use hyphens or underscores instead of spaces. In Captivate, this means you need to set the name in the Project Title field in the Publish dialog correctly to output the files without spaces.
Also, there's no point uploading the .agg file to your web server or Moodle as this is just the file that Captivate reads in order to create the Aggregated project output. It's not required for the final content on the server.
Similar Messages
-
This was all working yesterday, but this morning, I cannot run in the dev fabric, or even setting the website project as a startup project directly, I get the following error:
Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'msshrtmi' could not be loaded.
=== Pre-bind state information ===
LOG: User = Andrew-VAIO\Andrew
LOG: DisplayName = msshrtmi
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: msshrtmi | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/
LOG: Initial PrivatePath = C:\Users\Andrew\Desktop\Beko2011Azure\Website\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\Andrew\Desktop\Beko2011Azure\Website\web.config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/bin/msshrtmi.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
[ConfigurationErrorsException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +618
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +209
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +94
System.Web.Compilation.BuildManager.CallPreStartInitMethods() +332
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +677
[HttpException (0x80004005): Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9079228
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +97
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +258
Note that the dev machine is x64 Win7.
I have not tried deploying this to staging since the issue started as I'm a bit nervous of touching the staging/live environment until this is solved.
Removing the PlatformTarget element from the project file has no effect
Removing the msshrtmi.dll file from the bin directory of the website project ends up with
'Could not load file or assembly 'Microsoft.WindowsFabric.Common, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified'
I have used Git to revert to the last working build to no effect (But I don't have the obj/bin folders in GIT), but it has atleast reset the project files etc.
If I return msshrtmi.dll to the bin folder and switch the model and website projects to x64 there is no change
If I switch both to x86 then I get an error Could not load file or assembly 'BekoModel2011' or one of its dependencies. An attempt was made to load a program with an incorrect format.
which is the model project - presumably because to run on my x64 machine I need the 64bit version?
I really need to be able to debug and then publish some changes ASAP.
AndrewHi,
Is it true that you're using IIS to host the application? Could you check whether the process is x64 or x86 one via task manager or config in IIS manager?
http://blogs.msdn.com/b/rakkimk/archive/2007/11/03/iis7-running-32-bit-and-64-bit-asp-net-versions-at-the-same-time-on-different-worker-processes.aspx
Allen Chen [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, V
I'm working on a 64 bit windows 7 ultimate system and I can't get the Oracle.DataAccess and Oracle.Web to load on the helloworld web page
See error below. At the very end i have the gacutil output. Also, the same dll's work on a 32 bit windows 7 system. I've also tried to load the beta version of the odac 64 bit
but it it gets a "java stopped working error"
Thanks in advance
WEB PAGE ERRORVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
Server Error in '/test/helloworld' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 37: <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 38: <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 39: <add assembly="Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
Line 40: <add assembly="Oracle.Web, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/></assemblies>
Line 41: </compilation>
Source File: C:\inetpub\wwwroot\test\helloworld\web.config Line: 39
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
=== Pre-bind state information ===
LOG: User = IIS APPPOOL\DefaultAppPool
LOG: DisplayName = Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
(Fully-specified)
LOG: Appbase = file:///C:/inetpub/wwwroot/test/helloworld/
LOG: Initial PrivatePath = C:\inetpub\wwwroot\test\helloworld\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\inetpub\wwwroot\test\helloworld\web.config
LOG: Using host configuration file: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Aspnet.config
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v2.0.50727\config\machine.config.
LOG: Post-policy reference: Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.EXE.
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
gacuil output
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
C:\Users\Administrator>C:\"Program Files"\"Microsoft SDKs"\Windows\v6.0A\Bin\x64
\gacutil.exe /l Oracle.DataAccess
Microsoft (R) .NET Global Assembly Cache Utility. Version 3.5.21022.8
Copyright (c) Microsoft Corporation. All rights reserved.
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=x86
Edited by: burk_s on Jun 6, 2010 2:42 PMHi Mubarak,
Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Could not load file or assembly 'Oracle.DataAccess error on server
I have been building a.NET application on my local Machine Windows 7 and have the 32-bit ODT installed on my machine which works nicely with VS 2010.
I placed it on the server and when I open the page that accesses data from Oracle, I get the below error. Both the server and my local computer have the Oracle.DataAccess
dll installed and both have the same public token 89b483f429c47342. I changed the target CPU from Any CPU to x86 and published a Release build of my project to the server.
Why am I getting the below error?
==========================================================================================================
Could not load file or assembly 'Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.]
antac.dashboard.Page_Load(Object sender, EventArgs e) in C:\Users\George\Documents\Visual Studio 2010\Projects\antac\antac\dashboard.aspx.cs:92
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25
System.Web.UI.Control.LoadRecursive() +71
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3048
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1This was definitely the right answer, I thought ODAC was already installed on the server, but apparently not. I installed the 64-bit OCAC XCopy version on the server and now it works.
-
In your experience what are the most common errors in binding files when deploying?
As the title suggest I'm interested in discussing the most common errors in binding files when deploying.
Reason for this is that I'm currently working on a Powershell script that can parse a binding file and create a reader friendly report (rtf format) with various information.
But the main purpose for this script is to find common errors in the binding file used. And so far these are the ones I've thought of:
- Tracking enabled for either services or the pipelines they are using (if it's a binding meant for Prod).
- Orchestrations logical ports not having any ports bound to them.
- URI containing certain words that's not ok. For example if a binding meant for Prod contains the word "test" anywhere in the URI then that should be reported in the created rtf report. This also applies vice versa.
So now I need your help with coming up with more ideas on common errors that need to be looked after and reported on if found!
Additional features the report should contain:
- Listing the details of each orchestration, send port, receive port along with their associated receive location(s). To better understand and get a quick overview on exactly what settings are planned to be deployed. Especially the "TransportTypeData"
section which otherwise can be quite tedious to read.
- List each unique host instance, so that I can easier see directly which ones might need a restart after an import.
I'd appreciate if you can come up with any more features that should be included in this script.
/Christian @ IntegrationAdmin.comFilter on send port not on the same line as the Filter tag.
This one is a nice one, I ran into it several times. Mostly after copy/paste of a port definition for a binding file, because Visual Studio is formatting after paste the XML in a way the filter will get invalid. This leads to a cryptic error
during importing the binding.
http://winterdom.com/2008/06/biztalkfiltersnotgettingimported
Jean-Paul Smit | Didago IT Consultancy
Blog |
Twitter | LinkedIn
MCTS BizTalk 2006/2010 + Certified SOA Architect
Please indicate "Mark as Answer" if this post has answered the question. -
WARNING: Could not bind factory to JNDI
Hi i am using tomcat server5.5
Eclipse 3.2 and adding tomcat plug-in's to my Eclipse
i created JNDI on tomcat server i got this type of error
plez any one can help me
i got this type WARNING
WARNING: Could not bind factory to JNDI
javax.naming.NamingException: Context is read only
how can i over come this worning
the server show message like
INFO: Factory name: java:hibernate/SessionFactory
May 2, 2007 9:12:24 AM org.hibernate.util.NamingHelper getInitialContext
INFO: JNDI InitialContext properties:{}
May 2, 2007 9:12:24 AM org.hibernate.util.NamingHelper bind
INFO: Creating subcontext: java:hibernate
May 2, 2007 9:12:24 AM org.hibernate.impl.SessionFactoryObjectFactory addInstanc
e
WARNING: Could not bind factory to JNDI
javax.naming.NamingException: Context is read only
at org.apache.naming.NamingContext.checkWritable(NamingContext.java:901)
at org.apache.naming.NamingContext.createSubcontext(NamingContext.java:5
15)
at org.apache.naming.NamingContext.createSubcontext(NamingContext.java:5
36)
at org.apache.naming.SelectorContext.createSubcontext(SelectorContext.ja
va:421)
at javax.naming.InitialContext.createSubcontext(InitialContext.java:423)
at org.hibernate.util.NamingHelper.bind(NamingHelper.java:69)
at org.hibernate.impl.SessionFactoryObjectFactory.addInstance(SessionFac
toryObjectFactory.java:90)
at org.hibernate.impl.SessionFactoryImpl.<init>(SessionFactoryImpl.java:
303)
at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.jav
a:1213)
at com.gssamerica.expensereporting.business.dao.HibernateUtil.<clinit>(H
ibernateUtil.java:38)
at com.gssamerica.expensereporting.business.dao.RoleHome.roleList(RoleHo
me.java:159)
at com.gssamerica.expensereporting.business.listener.LookupCacheListener
.cacheRoles(LookupCacheListener.java:168)
at com.gssamerica.expensereporting.business.listener.LookupCacheListener
.contextInitialized(LookupCacheListener.java:48)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3827)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4
343)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478
at org.apache.catalina.core.StandardService.start(StandardService.java:4
80)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:231
3)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
May 2, 2007 9:12:24 AM org.hibernate.cache.UpdateTimestampsCache <init>
INFO: starting update timestamps cache at region: org.hibernate.cache.UpdateTime
stampsCache
May 2, 2007 9:12:24 AM org.hibernate.cache.EhCacheProvider buildCache
WARNING: Could not find configuration [org.hibernate.cache.UpdateTimestampsCache
]; using defaults.
May 2, 2007 9:12:24 AM org.hibernate.cache.StandardQueryCache <init>
INFO: starting query cache at region: org.hibernate.cache.StandardQueryCache
May 2, 2007 9:12:24 AM org.hibernate.cache.EhCacheProvider buildCache
WARNING: Could not find configuration [org.hibernate.cache.StandardQueryCache];
using defaults.
Roles Cached......
##################>.SessionImpl(PersistenceContext[entityKeys=[],collectionKeys=
[]];ActionQueue[insertions=[] updates=[] deletions=[] collectionCreations=[] col
lectionRemovals=[] collectionUpdates=[]])
Currencies Cached.......
Countries Cached.......
JNDI DATASOURCE USED ........................................
Instance Created .................
org.apache.commons.dbcp.SQLNestedException: Cannot create JDBC driver of class '
' for connect URL 'null'
at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSou
rce.java:780)
at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource
.java:540)
at com.gssamerica.expensereporting.ui.common.SQLManager.getConnection(SQ
LManager.java:93)
at com.gssamerica.expensereporting.business.dao.CacheHome.getExpenseIds(
CacheHome.java:63)
at com.gssamerica.expensereporting.business.listener.LookupCacheListener
.cacheExpenseId(LookupCacheListener.java:191)
at com.gssamerica.expensereporting.business.listener.LookupCacheListener
.contextInitialized(LookupCacheListener.java:51)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3827)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4
343)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478
at org.apache.catalina.core.StandardService.start(StandardService.java:4
80)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:231
3)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Caused by: java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getDriver(DriverManager.java:243)
at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSou
rce.java:773)
... 20 more
Connection Error - Exchange Rates cannot be Stored in Database
Expense Ids Cached......
Statuses Cached......
May 2, 2007 9:12:27 AM org.apache.catalina.startup.ContextConfig applicationConf
ig
INFO: Missing application web.xml, using defaults only StandardEngine[Catalina].
StandardHost[localhost].StandardContext[SCWCDProj]
log4j:WARN No appenders could be found for logger (org.apache.commons.beanutils.
ConvertUtils).
log4j:WARN Please initialize the log4j system properly.
log4j:ERROR Could not read configuration file from URL [file:E:/WebExpenses/Test
ValidationsTomcat/WEB-INF/classes/log4j.properties].
java.io.FileNotFoundException: E:\WebExpenses\TestValidationsTomcat\WEB-INF\clas
ses\log4j.properties (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection
.java:70)
at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLCon
nection.java:161)
at java.net.URL.openStream(URL.java:1007)
at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurato
r.java:433)
at org.apache.log4j.PropertyConfigurator.configure(PropertyConfigurator.
java:336)
at org.springframework.util.Log4jConfigurer.initLogging(Log4jConfigurer.
java:70)
at org.springframework.web.util.Log4jWebConfigurer.initLogging(Log4jWebC
onfigurer.java:151)
at org.springframework.web.util.Log4jConfigListener.contextInitialized(L
og4jConfigListener.java:51)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3827)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4
343)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478
at org.apache.catalina.core.StandardService.start(StandardService.java:4
80)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:231
3)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
log4j:ERROR Ignoring configuration file [file:E:/WebExpenses/TestValidationsTomc
at/WEB-INF/classes/log4j.properties].
May 2, 2007 9:12:30 AM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
May 2, 2007 9:12:31 AM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
May 2, 2007 9:12:32 AM org.apache.catalina.loader.WebappClassLoader validateJarF
ile
INFO: validateJarFile(E:\WebExpenses\JSFDataBaseConnection\WEB-INF\lib\servlet-a
pi.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class:
javax/servlet/Servlet.class
log4j:WARN No appenders could be found for logger (org.apache.commons.beanutils.
ConvertUtils).
log4j:WARN Please initialize the log4j system properly.
May 2, 2007 9:12:35 AM org.apache.catalina.startup.ContextConfig applicationConf
ig
INFO: Missing application web.xml, using defaults only StandardEngine[Catalina].
StandardHost[localhost].StandardContext[WebServicesApp]
May 2, 2007 9:12:37 AM org.apache.catalina.loader.WebappClassLoader validateJarF
ile
INFO: validateJarFile(E:\WebExpenses\JSFApplication\WEB-INF\lib\servlet-api.jar)
- jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/s
ervlet/Servlet.class
May 2, 2007 9:12:39 AM org.apache.catalina.core.StandardHost getDeployer
INFO: Create Host deployer for direct deployment ( non-jmx )
May 2, 2007 9:12:39 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\admin.xml
May 2, 2007 9:12:40 AM org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.util.LocalStrings', returnNull=tru
e
May 2, 2007 9:12:40 AM org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.action.ActionResources', returnNul
l=true
May 2, 2007 9:12:40 AM org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.webapp.admin.ApplicationResources', retur
nNull=true
May 2, 2007 9:12:42 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\balancer.xml
May 2, 2007 9:12:43 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\jsp-examples.xml
May 2, 2007 9:12:43 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\manager.xml
May 2, 2007 9:12:44 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\ROOT.xml
May 2, 2007 9:12:44 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\servlets-examples.xml
May 2, 2007 9:12:44 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\tomcat-docs.xml
May 2, 2007 9:12:44 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\TomcatJNDIProj.xml
log4j:WARN No appenders could be found for logger (org.apache.commons.beanutils.
ConvertUtils).
log4j:WARN Please initialize the log4j system properly.
May 2, 2007 9:12:45 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\webdav.xml
May 2, 2007 9:12:46 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /struts2-blank-2.0.1 from URL f
ile:C:/Tomcat 5.0/webapps/struts2-blank-2.0.1
May 2, 2007 9:12:47 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Root WebApplicationContext: initialization started
May 2, 2007 9:12:47 AM org.springframework.core.CollectionFactory <clinit>
INFO: JDK 1.4+ collections available
May 2, 2007 9:12:47 AM org.springframework.core.CollectionFactory <clinit>
INFO: Commons Collections 3.x available
May 2, 2007 9:12:47 AM org.springframework.beans.factory.xml.XmlBeanDefinitionRe
ader loadBeanDefinitions
INFO: Loading XML bean definitions from ServletContext resource [/WEB-INF/applic
ationContext.xml]
May 2, 2007 9:12:47 AM org.springframework.context.support.AbstractRefreshableAp
plicationContext refreshBeanFactory
INFO: Bean factory for application context [Root WebApplicationContext]: org.spr
ingframework.beans.factory.support.DefaultListableBeanFactory defining beans [];
root of BeanFactory hierarchy
May 2, 2007 9:12:48 AM org.springframework.context.support.AbstractApplicationCo
ntext refresh
INFO: No beans defined in application context [Root WebApplicationContext]
May 2, 2007 9:12:48 AM org.springframework.context.support.AbstractApplicationCo
ntext initMessageSource
INFO: Unable to locate MessageSource with name 'messageSource': using default [o
[email protected]]
May 2, 2007 9:12:48 AM org.springframework.context.support.AbstractApplicationCo
ntext initApplicationEventMulticaster
INFO: Unable to locate ApplicationEventMulticaster with name 'applicationEventMu
lticaster': using default [org.springframework.context.event.SimpleApplicationEv
entMulticaster@2f7cfe]
May 2, 2007 9:12:48 AM org.springframework.ui.context.support.UiApplicationConte
xtUtils initThemeSource
INFO: Unable to locate ThemeSource with name 'themeSource': using default [org.s
[email protected]3]
May 2, 2007 9:12:48 AM org.springframework.beans.factory.support.DefaultListable
BeanFactory preInstantiateSingletons
INFO: Pre-instantiating singletons in factory [org.springframework.beans.factory
.support.DefaultListableBeanFactory defining beans []; root of BeanFactory hiera
rchy]
May 2, 2007 9:12:48 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Using context class [org.springframework.web.context.support.XmlWebApplica
tionContext] for root WebApplicationContext
May 2, 2007 9:12:48 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Root WebApplicationContext: initialization completed in 1638 ms
May 2, 2007 9:12:49 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /HibElearning from URL file:C:\
Tomcat 5.0\webapps\HibElearning
May 2, 2007 9:12:50 AM org.apache.catalina.loader.WebappClassLoader validateJarF
ile
INFO: validateJarFile(C:\Tomcat 5.0\webapps\HibElearning\WEB-INF\lib\servlet-api
.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: ja
vax/servlet/Servlet.class
log4j:WARN No appenders could be found for logger (org.apache.commons.beanutils.
ConvertUtils).
log4j:WARN Please initialize the log4j system properly.
May 2, 2007 9:12:51 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /reddy from URL file:C:\Tomcat
5.0\webapps\reddy
May 2, 2007 9:12:52 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Root WebApplicationContext: initialization started
May 2, 2007 9:12:52 AM org.springframework.core.CollectionFactory <clinit>
INFO: JDK 1.4+ collections available
May 2, 2007 9:12:52 AM org.springframework.core.CollectionFactory <clinit>
INFO: Commons Collections 3.x available
May 2, 2007 9:12:52 AM org.springframework.beans.factory.xml.XmlBeanDefinitionRe
ader loadBeanDefinitions
INFO: Loading XML bean definitions from ServletContext resource [/WEB-INF/applic
ationContext.xml]
May 2, 2007 9:12:52 AM org.springframework.context.support.AbstractRefreshableAp
plicationContext refreshBeanFactory
INFO: Bean factory for application context [Root WebApplicationContext]: org.spr
ingframework.beans.factory.support.DefaultListableBeanFactory defining beans [];
root of BeanFactory hierarchy
May 2, 2007 9:12:52 AM org.springframework.context.support.AbstractApplicationCo
ntext refresh
INFO: No beans defined in application context [Root WebApplicationContext]
May 2, 2007 9:12:53 AM org.springframework.context.support.AbstractApplicationCo
ntext initMessageSource
INFO: Unable to locate MessageSource with name 'messageSource': using default [o
[email protected]]
May 2, 2007 9:12:53 AM org.springframework.context.support.AbstractApplicationCo
ntext initApplicationEventMulticaster
INFO: Unable to locate ApplicationEventMulticaster with name 'applicationEventMu
lticaster': using default [org.springframework.context.event.SimpleApplicationEv
entMulticaster@fae78f]
May 2, 2007 9:12:53 AM org.springframework.ui.context.support.UiApplicationConte
xtUtils initThemeSource
INFO: Unable to locate ThemeSource with name 'themeSource': using default [org.s
[email protected]3]
May 2, 2007 9:12:53 AM org.springframework.beans.factory.support.DefaultListable
BeanFactory preInstantiateSingletons
INFO: Pre-instantiating singletons in factory [org.springframework.beans.factory
.support.DefaultListableBeanFactory defining beans []; root of BeanFactory hiera
rchy]
May 2, 2007 9:12:53 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Using context class [org.springframework.web.context.support.XmlWebApplica
tionContext] for root WebApplicationContext
May 2, 2007 9:12:53 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Root WebApplicationContext: initialization completed in 1279 ms
May 2, 2007 9:12:53 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8080
May 2, 2007 9:12:54 AM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:8009
plez any one can help me as early as possibleMaybe this resoruce will be helpful.
-
Hello,
I have a BizTalk Server 2009 running on Windows Server 2003 x64. I am installing WCF-SAP adapter and have done the following for the same. However, I am getting an error as mentioned below when I click on the Configure button of WCF-SAP adapter in send
port. I would appreciate if anyone could let me know how to fix this error and make the WCF-SAP adapter working.
TITLE: BizTalk Server 2009 Administration Console
Exception has been thrown by the target of an invocation. (mscorlib)
ADDITIONAL INFORMATION:
Exception has been thrown by the target of an invocation. (mscorlib)
Could not load file or assembly 'Microsoft.Adapters.SAP.SAPGInvoker, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. This application has failed to start because the application configuration is incorrect. Reinstalling
the application may fix this problem. (Exception from HRESULT: 0x800736B1) (Microsoft.Adapters.SAP)
This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. (Exception from HRESULT: 0x800736B1)
I have copied the following 32 bit & 64 bit unicode DLLs in SysWOW64 and System32 folders respectively.
icudt30.dll
icuin30.dll
icuuc30.dll
librfc32u.dll
libsapu16vc71.dll
libsapucum.dll
Following r3dllinst DLLs are there in System32 folder.
mfc42.dll
mfc42u.dll
mfc71.dll
mfc71u.dll
msvcp60.dll
msvcp71.dll
msvcp80.dll
msvcr71.dll
msvcr80.dll
Following r3dllinst DLLs are there in SysWOW64 folder.
mfc40.dll
mfc40u.dll
mfc42.dll
mfc42u.dll
mfc71.dll
mfc71u.dll
mfc80.dll
mfc80u.dll
msvcp50.dll
msvcp60.dll
msvcp71.dll
msvcp80.dll
msvcr71.dll
msvcr80.dll
I have the following softwares installed on the server.
Microsoft Visual C++ 2008 Redistributable x64
Microsoft Visual C++ 2008 Redistributable x86
WCF LOB Adapter SDK (64-bit)
BizTalk Adapter Pack 2.0 (64-bit)
BizTalk Adapter Pack 2.0 (32-bit)
The following bindings are also present in the machine.config under Framework\v2.0.50727\CONFIG and Framework64\v2.0.50727\CONFIG
<system.serviceModel>
<extensions>
<bindingElementExtensions>
<add name="sapAdapter" type="Microsoft.Adapters.SAP.SAPAdapterExtensionElement, Microsoft.Adapters.SAP, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</bindingElementExtensions>
</extensions>
<client>
<endpoint binding="sapBinding" contract="IMetadataExchange" name="sap" />
</client>
</system.serviceModel>
Thanks,
TarunHave you tried this?
http://geekswithblogs.net/MoonWalker/archive/2013/07/17/could-not-load-file-or-assembly-microsoft.adapters.sap.sapginvoker.dll.aspx
Morten la Cour -
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 31: <compilation debug="true">
Line 32: <assemblies>
Line 33: <add assembly="Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89B483F429C47342" />
Line 34: <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
Line 35: <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
Source File: D:\AverySignatureBinders\httpsdocs\ASBNet\web.config Line: 33
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].For Adapter Pack 2013 the following Oracle Client(s) are needed:
Supported client versions: Oracle Data Access Components for Oracle Client 12.1, Oracle Data Access Components for Oracle Client 11.2.0.1
And please bear in mind that both the 32- and 64 bit versions are needed.
Morten la Cour -
I'm having problem as
"A class name generation conflict has occured between element 'psoID' and element 'psoID'. Please use a Binding file to solve this problem.Continue anyway [not recommended] (y|n|?)"
Above warning is generated when am trying to generate java classes for SPML XSD file using Castor's SourceGenerator?Achim Lörke wrote:
> First guess: you haven't defined the classpath in the plugin.xml of
> your plugin. If that's the case, edit the plugin.xml, go to the
> "Runtime" tab and add all necessary entries to the classpath.
>
>
> Achim
> --
> Eclipse Stammtisch Braunschweig/Wolfsburg/usw. am 18.12.2007
> siehe http://www.bredex.de/de/news/eclipseregtable.html
The problem was providing the proper class loader to the Mapping object
constructor. Castor mapping object requires the class loader when
running as a java extension.
Regards
Samrat Dhillon -
Binding file to update package name issue
I'm trying to change the package name via a binding file, however I'm having issues. The schema within the WSDL is defined as a local schema rather than at http: How would I get the following to work? Thank you for your time
1) WSDL
<wsdl:definitions xmlns="..."
<xs:schema attributeFormDefault="qualified" elementFormDefault="qualified" ...>
<xs:import namespace=""/>
<xs:import namespace="http://aaa" schemaLocation="a.xsd"/>
</xs:schema>
2) Binding file
<jxb:bindings xmlns:xs="http://www.w3.org/2001/XMLSchema" schemaLocation="a.xsb" node="/xs:schema">
<jxb:schemaBindings>
<jxb:package name="com.a"/>
</jxb:schemaBindings>
</jxb:bindings>
3) Output
a.xsb" is not a part of this compilation. Is this a mistake for ...Hello,
You are creating your url using the SPList object "docLibrary" which is not providing you the url of the list, that's your error
here a sample to how upload file :http://blogs.msdn.com/b/peterj/archive/2008/01/23/creating-folders-and-adding-files-to-sharepoint-document-library.aspx
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer? -
FtpAdapter not reading files consistently
I'm using Ftp Adapter to read files from ftps server. It is not reading files consistently. All of a sudden it stops reading the files. Once I restart the run time instance, it starts reading again. There are no errors in logs.
The wsdl configurations and oc4j-ra.xml is given below. Is there any configurations to be done for clustered environment? There are 2 run time instances trying to read files from same directory in the same ftps server.
WSDL
<message name="Get_msg">
<part name="opaque" element="opaque:opaqueElement" />
</message>
<portType name="Get_ptt">
<operation name="Get">
<input message="tns:Get_msg" />
</operation>
</portType>
<binding name="Get_binding" type="tns:Get_ptt">
<pc:inbound_binding />
<operation name="Get">
<jca:operation FileType="ascii" PhysicalDirectory="/users/PCGFTPS/test/inbound/272" ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec" DeleteFile="true" IncludeFiles="saf272\.d.*\.t.*c.*" PollingFrequency="5" MinimumAge="0" OpaqueSchema="true" />
<input>
<jca:header message="hdr:InboundHeader_msg" part="inboundHeader" />
</input>
</operation>
</binding>
<service name="readFileFromFTPS">
<port name="Get_pt" binding="tns:Get_binding">
<jca:address location="eis/Ftp/edi/FtpAdapter" UIincludeWildcard="saf272.d*.t*c*" />
</port>
</service>
<plt:partnerLinkType name="Get_plt">
<plt:role name="Get_role">
<plt:portType name="tns:Get_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>
oc4j-ra.xml
<config-property name="host" value="ftps.qa.com"/>
<config-property name="port" value="21"/>
<config-property name="username" value="ftps"/>
<config-property name="password" value="8888"/>
<config-property name="ftpAbsolutePathBegin" value="/"/>
<config-property name="ftpPathSeparator" value="/"/>
<config-property name="changeDirectory" value="false"/>
<config-property name="enforceFileTypeFromSpec" value="false"/>
<config-property name="keepConnections" value="true"/>
<config-property name="keepAlive" value="false"/>
<config-property name="serverType" value="win"/>
<config-property name="serverLocaleLanguage" value=""/>
<config-property name="serverLocaleCountry" value=""/>
<config-property name="serverLocaleVariant" value=""/>
<config-property name="serverEncoding" value=""/>
<config-property name="defaultDateFormat" value="MMM d yyyy"/>
<config-property name="recentDateFormat" value="MMM d HH:mm"/>
<config-property name="serverTimeZone" value=""/>
<config-property name="listParserKey" value="WIN"/>
<config-property name="timeParserKey" value="default"/>
<config-property name="useFtps" value="true"/>
<config-property name="useImplicitSSL" value="false"/>
<config-property name="walletLocation" value="/tools/da/oracle/swinstall/product/10.1.3.1/OAS11/opmn/conf/ssl.wlt/interfaces/ewallet.p12"/>
<config-property name="walletPassword" value="oc4jadmin"/>
<config-property name="channelMask" value="both"/>
<config-property name="securePort" value="990"/>
<config-property name="keyStoreProviderName" value="oracle.security.pki.OraclePKIProvider"/>
<config-property name="keystoreType" value="PKCS12"/>
<config-property name="keystoreAlgorithm" value="OracleX509"/>
<config-property name="enableCipherSuits" value=""/>
<config-property name="pkiProvider" value="OraclePKI"/>
<config-property name="jsseProvider" value="OracleJSSE"/>
<config-property name="proxyHost" value=""/>
<config-property name="proxyPort" value=""/>
<config-property name="proxyUsername" value=""/>
<config-property name="proxyPassword" value=""/>
<config-property name="proxyType" value=""/>
<config-property name="proxyDefinitionFile" value=""/>
<config-property name="useProxy" value="false"/>
<config-property name="useSftp" value="false"/>
<config-property name="authenticationType" value="password"/>
<config-property name="preferredKeyExchangeAlgorithm" value="diffie-hellman-group1-sha1"/>
<config-property name="preferredCompressionAlgorithm" value="none"/>
<config-property name="preferredDataIntegrityAlgorithm" value="hmac-md5"/>
<config-property name="preferredPKIAlgorithm" value="ssh-rsa"/>
<config-property name="privateKeyFile" value=""/>
<config-property name="preferredCipherSuite" value="blowfish-cbc"/>
<config-property name="transportProvider" value="socket"/>
<connection-pooling use="none">
</connection-pooling>
<security-config use="none">
</security-config>The fact that two instances are reading the same directory doesn't look that good to me. In parallel, the DB Adapter, polling for new records must not have two instances polling for the same table! Another issue could be problems on the FTP server itself. FTP connections are in Passive mode. It could be that the FTP server runs into portnumbers that are blocked in the firewall. This can be read from FTP logging on the FTP server itself.
-
Hi There..
I'm running the follows:
1. OS : XP SP3
2. VS 2010
3. ODP Net 11.2.0.2.0
When I set the ASP NET target framework to .NET 4 all running normally. However, if the set target to .NET 2 appears error "Could not load file or assembly Oracle.DataAccess, Version=4.112.2.0".
What could be the problem ?
Thanks,
IqbalJust figure it out..
use assembly binding when targetted framework is 2.0
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="Oracle.DataAccess" publicKeyToken="89b483f429c47342"/>
<bindingRedirect oldVersion="4.112.2.0" newVersion="2.112.2.0"/>
</dependentAssembly>
</assemblyBinding>
</runtime>
.. and all running back normally :D -
Hi,
I'm trying to generate client code from WSDL with wsimport maven goal. I can generate the code, but I have this specific problem which I'm trying to solve by jaxb and jaxws external binding files.
In my src/main/resources/wsdl directory I have
- three WSDL files (let's say A.wsdl, B.wsdl, C.wsdl)
- two XSD files(X.xsd, Y.xsd)
All these files share the same targetNamespace.
A.wsdl includes X.xsd through
<xsd:include schemaLocation="X.xsd" />
B.wsdl and C.wsdl include Y.xsd in the same manner.
Since X.xsd and Y.xsd types are generated into one package, the ObjectFactory is overwritten.
I'd like to generate X.xsd types into one package and Y.xsd types into another. I've not been able to exploit jaxb and jaxws binding to do that.
Is this possible when X.xsd and Y.xsd have the same targetNamespace?
The idea is shown in this binding file (it's not correct, but I've tried many combinations of these declarations without success)
<jaxws:bindings xmlns:jaxb="http://java.sun.com/xml/ns/jaxb"
xmlns:jaxws="http://java.sun.com/xml/ns/jaxws"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<jaxb:bindings shcemaLocation="../main/resources/wsdl/X.xsd">
<jaxb:schemaBindings>
<jaxb:package name="package_x" />
</jaxb:schemaBindings>
</jaxb:bindings>
<jaxb:bindings shcemaLocation="../main/resources/wsdl/Y.xsd">
<jaxb:schemaBindings>
<jaxb:package name="package_y" />
</jaxb:schemaBindings>
</jaxb:bindings>
</jaxws:bindings>
{code}Hi Ram Swami,
When I try to add services reference by using this:
https://www.sunat.gob.pe/ol-ti-itcpgem-beta/billService?wsdl, it generates a baiscHttpBinding in my client config file, so could you please try to use the baiscHttpBinding in your client config file for instead to see if it works? The following article
is about accessing Java service(Jax-WS) from C#.net, please try to check it:
http://gayandenzil.blogspot.jp/2012/07/write-web-service-using-jax-ws-and.html .
Besides, this forum is used to discuss the questions about the WCF Web Service, for the questions about the others web services, please try to post in this forum:
http://forums.asp.net/28.aspx/1?WCF+ASMX+and+other+Web+Services .
Thanks for your understanding.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Could not load file or assembly DreamweaverCtrls
Hello,
I’ve been researching my issue, but haven’t had
any luck in getting it resolved. So, i’m hoping someone can
please help me!
I’m using DW 8 and am trying to load a simple asp.net
application. The application works perfectly fine on my local
server. The problem is, is that can’t get the application to
even open when it is on the hosting server. When I try to run the
application I receive the following Parser Error message.
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a
resource required to service this request. Please review the
following specific parse error details and modify your source file
appropriately.
Parser Error Message: Could not load file or assembly
'DreamweaverCtrls, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=836f606ede05d46a' or one of its dependencies. The
system cannot find the file specified.
Source Error:
Line 1: <%@ Page Language="VB" ContentType="text/html"
%>
Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
Line 3:
Line 4: <MM:Insert
Source File: /Signup Form.aspx Line: 2
Assembly Load Trace: The following information can be helpful
to determine why the assembly 'DreamweaverCtrls, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=836f606ede05d46a' could not be
loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry
value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with
assembly bind failure logging.
To turn this feature off, remove the registry value
[HKLM\Software\Microsoft\Fusion!EnableLog].
Version Information: Microsoft .NET Framework
Version:2.0.50727.42; ASP.NET Version:2.0.50727.210KandSpam Wrote:
> Nevermind I figured it out!
What was your solution? -
Hi,
I'm running TFS2013.4 with a number of build servers and all working fine.
I'm also running Release Management with update 4 (12.0.31101.0) and am running into trouble when trying to run my first dummy release.
I have setup my servers, stages, releases paths, components and release template (all vNext) with out issue.
When I run my Release Template (Deploy Using PS/DSC) I'm getting the following error :-
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.AggregateException: One or more errors occurred. ---> System.IO.FileNotFoundException:
Could not load file or assembly 'System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies.
The system cannot find the file specified.
at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.PowershellExecutor.DisposeCurrentSession()
at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.RemoteDeploymentHelper.Dispose()
at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.DeploymentClient.<RunAsync>d__11.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.VisualStudio.Services.DevTestLabs.Deployment.Deployment.DeploymentClient.<RunPowerShellAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.TeamFoundation.Release.EnvironmentProvider.OnPrem.Implementation.OnPremDeploymentProvider.<CopyBuildsLocally>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.TeamFoundation.Release.EnvironmentProvider.OnPrem.Implementation.OnPremDeploymentProvider.<RunScript>d__0.MoveNext()
--- End of inner exception stack trace ---
at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Release.MonitorServices.Dsc.OnPrem.OnPremDeploymentActions.InvokePlatform(String activityId, MachineSpecification machineSpecification, StorageSpecification storageSpecification, String scriptPath, String configurationPath,
Dictionary`2 configurationVariables)
at Microsoft.TeamFoundation.Release.MonitorServices.Dsc.OnPrem.OnPremDeploymentActions.RunScript(DscComponent dscComponentParameters, String serverName, String userName, String password, String componentName, String scriptPath, String configurationPath,
String useCredSecuritySupportProvider, String useHttps, String skipCACheck)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.Dsc.DscComponentInstaller.InvokeMethodByReflection(String methodArguments)
I can't work out if my target machine (2008 R2 SP1) has a problem with WMA 3.0 or if the Release Template can't find the powershell script that I'm trying to call. I figured that the relative path to the script could be wrong and have tried numerous
iterations to no effect. The error clearly points to a problem with WMA right?
The target machine has .Net Framework 4.0, WMA Framework 3.0 and I can run Enter-PSSession to remote to it etc...
Before I trash and rebuild my target machine I hoping someone may have some insight to my problem?
Thanks in Advance
Jason
shroomieDaniel,
The PS Script is taken from an MSDN blog and is fairly standard. I'm sure it will run fine when executed, but I've not run it as it requires environment variables ($applicationPath) that will be present in the Release Management session calling it.
Here's the script :-
configuration InstallModules
param
# Target nodes to apply the configuration
[string[]]$NodeName = 'localhost',
# Source Path for Modules
[String]$SourcePath = "$applicationPath\Deploy\Modules",
# Destination path for Modules
[String]$DestinationPath = "$env:ProgramFiles\WindowsPowershell\Modules"
Node $NodeName
# Copy the Modules
File ModuleContent
Ensure = "Present"
SourcePath = $SourcePath
DestinationPath = $DestinationPath
Recurse = $true
Type = "Directory"
InstallModules
Thanks
Jason
shroomie
Maybe you are looking for
-
My laptop was updating itunes and turned off and every since when i try to load itunes it brings up a window that says The itunes library.itl fie cannot be found or created. The default location for this fie is in the itunes folder in the Music folde
-
File /folder permission problem
Hi, I have a share on server 2012 R2 with FULL ACCESS. Now I have problem to write in it when I mounted the network share on a PC booted with WinPE. Even I mounted the share with Administrator Account. Effective permissions and ownership details seem
-
20 inch cinema monitor to a imac g4.
okay. so basically i have the monitor already. in addition, i bought the apple dvi to adc convertor. so now i need to figure out how to convert my mini vga to dvi. i bought a small adapter on the net, hasn't arrived yet, it's a vga to dvi-i convertor
-
Need Help 'installing' 21" monitor
I need to place a 21" Sun monitor in a Monitoring Wall, where space is tight due to the small doors on the front. There are doors in the back, but they are unreachable. There is enough room if I take off the bottom foot that the monitor stands on. I
-
How to make WMV files open in in Windows Media Player not Flip4Mac/QT
I just installed Safari 4. With Safari 3 when I clicked on a WMV file on a web site it would automatically open in Windows Media Player. I liked this arrangement just fine. When I installed Safari 4, instead of this happening WMV files started to dow