Aging and slowing computer, time to replace RAM?

I have a late 2008 Black MacBook with 4gb 667MHz DDR2 SDRAM and about 45gb (of 250gb) of free space on my HD. Lately, my poor MacBook has been getting extremely slow even with the most mundane of tasks like checking my email. I notice that my memory usage fluxuates a lot more and the computer gets significantly hotter lately than it did in the past, so I'm thinking that the problem is related mostly to that more than anything else. What I'm trying to figure out is whether replacing the RAM would solve this problem, or if this problem may be related to something else. Please let me know your thoughts, or if other diagnostic material is needed to help further troubleshoot.

If the computer is working, then the RAM is fine. RAM doesn't slow down with age. You have other problems - maybe not enough RAM.
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
  1. Carbon Copy Cloner
  2. Data Backup
  3. Deja Vu
  4. SuperDuper!
  5. SyncTwoFolders
  6. Synk Pro
  7. Synk Standard
  8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Similar Messages

  • Is ther a way to speed up a Mac? Mine has gotten slower and slower over time.  When memory comes close to full would that have an effect on performance? Is there a way to determine unused programs/software to remove and free space?

    Is there a way to speed up a Mac (similar to de-fragging on a PC)? Mine has gotten slower and slower over time. 
    When memory/disc comes close to full would that have an effect on performance? How should I determine what programs/software to remove and free space?

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • Slow computer after logicboard replacement/ any way to retrieve 18 month old receipts

    I purchased a Macbook Pro in August of 2008 and have been generally pleased with it. About a month ago it stopped turning on so I brought it in to the Apple store. They claimed that the video card was fried and that they would need to replace the entire logic board. The computer has been out of warranty for a little while now so I was seriously debating shelling out the $330 to replace the logic board. The genius guy assured me that it would run like new once it was replaced so I went ahead and did it. When I got it back, I soon noticed that everything was running slower. Over the last month, the computer has gotten so slow its almost unusable, so I started snooping into the computer a little bit. I noticed that I had 2 gb of memory. I think I originally installed 4 gb of memory but I cant be sure. I checked for the receipt but its nowhere to be found. Not too surprising considering how long its been sicne I originally bought the computer. I looked up the standard specs on everymac.com and found that 2 gb was the baseline. I am pretty sure Ive upgraded the memory on every computer I've ever gotten which further deepens my suspicion.  Now, I dont know for sure if I actually had 4 gb of memory and I dont want to start ranting and raving at the apple store about how the evil repairmen stole 2 gb of memory from me if I am not sure. Does anyone know of a way to check what was originally in my computer? If it turns out im simply forgetful, does anyone have any ideas about the slow computer following logicboard replacement? A quick google search let me know that I am not the only one with this problem but didnt turn up much in the way of help. Thanks so much.

    I purchased a Macbook Pro in August of 2008 and have been generally pleased with it. About a month ago it stopped turning on so I brought it in to the Apple store. They claimed that the video card was fried and that they would need to replace the entire logic board. The computer has been out of warranty for a little while now so I was seriously debating shelling out the $330 to replace the logic board. The genius guy assured me that it would run like new once it was replaced so I went ahead and did it. When I got it back, I soon noticed that everything was running slower. Over the last month, the computer has gotten so slow its almost unusable, so I started snooping into the computer a little bit. I noticed that I had 2 gb of memory. I think I originally installed 4 gb of memory but I cant be sure. I checked for the receipt but its nowhere to be found. Not too surprising considering how long its been sicne I originally bought the computer. I looked up the standard specs on everymac.com and found that 2 gb was the baseline. I am pretty sure Ive upgraded the memory on every computer I've ever gotten which further deepens my suspicion.  Now, I dont know for sure if I actually had 4 gb of memory and I dont want to start ranting and raving at the apple store about how the evil repairmen stole 2 gb of memory from me if I am not sure. Does anyone know of a way to check what was originally in my computer? If it turns out im simply forgetful, does anyone have any ideas about the slow computer following logicboard replacement? A quick google search let me know that I am not the only one with this problem but didnt turn up much in the way of help. Thanks so much.

  • Firefox gets slower and slower over time.

    I have been using firefox for some time, Like it better than Safari generally, but I've noticed (and it has gotten worse with 3.6.x) that if you leave FF running for extended periods of time it gets slower and slower, does not seem to matter if add-ons are installed or not, and it gets REALLY bad after going in and out of flash based apps/games a couple times. It is not just a mac problem as this behaviour also happens on windows xp or newer, but windows OS needs to be rebooted daily anyways so most people won't notice.

    Proceed with [[Basic Troubleshooting]] first of all.
    You could also try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

  • Macbook Pro 2011 loud fans and slow computer functioning?

    Today my Macbook has suddenly begun to act slow and the fans are running quite loud. I read online that I should try checking the activity moniter, and I did this, and a program is currently taking a large portion of my CPU. However, I am unable to quit it and I'm sure it is the problem. In one of the description fields it is lableled "root" and says "kernel_task". Someone please help me out!

    Actually I'm still running snow leopard. But this problem is confusing me so badly. I have tried several times to totally restart the computer by holding down the power button for a few seconds. The MacBook restarts fine but upon startup the fans start running loud again and the Performance of the computer is clearly slower than normal. For example, when I maneuver with the trackpad down to the dock the icons are very slow to respond. Also, normally upon startup my keyboard illuminates upon viewing the log in screen, however for some reason this is not happening either.
    I hope someone on here has the solution to this it would be greatly appreciated.

  • Slow computer even though replaced hard drive.

    I made a post before about this issue but I didn't get many replies. Going to make it very brief incase the old post was just TLDR kinda thing.
    First, my computer was running very slow, so slow that everything became unresponsive. The hard drive light was "busy" always yet my CPU usage was fine and no processes were causing it to do this. Starting up my computer took a good 8-10 min.
    I restarted my computer thinking it'd fix itself but I get the error "Windows has failed to start. A recent hard ware or software change..." I attempt to repair using various repair methods I've seen, CD, the option at start up, etc.... It always comes back with "It could not be repaired automatically, send to Windows.... etc"
    Me & boyfriend become convinced it's hard drive failure since his laptop he bought only 5 months after mine experienced hard drive failure (experiencing the same SLOW symptoms & errors) but he was covered under BestBuy warranty. I did not purchase it..
    I bought a new harddrive http://www.amazon.com/gp/product/B004I9J5OG/ref=ox_sc_act_title_1?ie=UTF8&m=ATVPDKIKX0DER and then use my WIndows 7 Upgrade CD and installed Windows 7 unto the brand new hard drive. 
    The computer works PERFECTLY and runs amazingly fast for the whole day/night.
    I then wake up the next morning and I am stunned to find my computer is having the symptoms of what the old hard drive had yet again. It ran SO SLOW and eventually became unresponsive. After restarting the computer, the error came again "Windows failed to start. A recent hardware or...." Again, all start up repairs come up with nothing saying "Could not be fixed automatically. Send more info to Windows."
    Now, everytime I start my laptop it takes a good 8-10 min to get to my desktop. To get to the WIndows login screen takes about 5 min alone.
    I've completely replaced a hard drive and STILL have the same problems. What else can I do? What is going on?

    Hi, I would like to assist you on this issue that you are having. I would need some information about the computer first please.  What is the model of the computer? I see that you are now running windows 7, is it 32 bit or 64 bit operating system?   Here is a document for performance issue's. Please click on the link and follow the on line instructions.http://goo.gl/Phyx87; If this does not resolve the issue, please feel free to write back with the information that I requested and I will be happy to do more research for you.
    Thanks in advance
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • IMac crashing randomly and slow boot time.

    My mid 2011 27" 2.7GHz i5 iMac has been crashing/powering off to black screen randomly. Apple just replaced the logic board and power supply last week. I have not had any more crashes yet, but on startup I get a white screen that will last for 1 whole minute at times before I finally get the Apple logo to appear. Can someone please tell me about how long my boot time should be and what could be the problem. Also my Mac keeps not seeing my External Hard drive Time Machine Backup. It will be working fine and then act like the drive is not connected. This seems to have started after Apple replaced my logic board and power supply. This is my first Mac ever and Im starting to get really frustrated!

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Extremely slow computer even after replacing hard drive. Please help.

    The problem started when I upgraded to lion (I think). I also run VMware fusion with windows 7 so maybe a virus? I ran disk utilities, followed suggestions on these communities to no avail. Our IT person and then apple support told me I should replace the hard drive. So I did. I played around a little bit and everything seemed good. Then I did a full restore from time capsule and everything is going downhill again. Any suggestions on a next step?

    See:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    Macintosh OS X Routine Maintenance,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths, and
    Myths of required versus not required maintenance for Mac OS X for information.

  • Fast disk and slow shipping times?

    Hi,
    I ordered MBP (with 4GB RAM and 200GB 7200rpm hard drive) from a Finnish reseller a month ago. Question is what's taking so long? Is it because of the RAM or hard drive? Is this normal? Please let me know if you have same kind of experiences. This would be my first mac so I might be too impatient =)

    Good morning,
    Sadly purchasing from Resellers often takes a considerably longer amount of time than ordering directly from Apple when a custom configuration is involved.
    You may wish to contact the reseller you purchased from and request an update as to how things are coming.
    Hope this helps! 
    David

  • Java kills my Safari and slows computer

    Everytime I run into Java (script or applet) while surfing on Safari it takes forever to load (at least 3-4 minutes) then slows down every other application until I quit Safari (i.e. copying and pasting in Word takes 5x as long if Safari is running in the background-but only after loading Java). I have all my Safari and Java updates installed. I have emptied my cache, cleared my history, trashed my safari icons folder and set it to read only, I've turned off all my auto-fill preferences, and I even trashed and reinstalled Safari, preferences and all. I have always had issues with Safari and Java, but things seem to be worse since I upgraded to Tiger. Only have this problem on my Powerbook, my G4 tower (which is 3 years older) has no problem loading or running Java, even after the Tiger upgrade. I thought it might be a memory thing, so I ran a hardware test, but everything passed. Any thoughts?

    Nevermind. I found my answer! I just cleared my Java cache (duh!) If anyone else has a similar problem go to: Applications>Utilities>Java> and open your plug-in settings, click the cache tab and click clear. Worked like a charm. Java loads instantly now, and no slowing down other apps either!! Woo-Hoo! I unchecked "enable caching" to keep it from happening again, of course you can limit your cache size too.

  • IMac mail is frozen and slows computer, occasional screen flicker.

         Anybody got a fix for frozen mail? It seems to slow down the machine and I've also noticed a flicker/buzz style jump to the screen occasionally and thinking it is related.

    iMacs are not designed to have the graphics cards upgraded. If your old card is bad and you feel competent to exchange it for the same one that's really your only GPU option. Apple never said the iMac GPU's were upgradeable and frankly I've never heard of anyone successfully upgrading an iMac GPU.
    As far as the adaptor well you could bring your system into an Apple Store and have it checked out by a Genius, it's a free service. I don't know how to make a reservation in Japan but I'm sure you can from the Japanese Apple site. The link in the US is:
    http://www.apple.com/buy/locator/service/
    I'm providing that so you can look for something equivalent.

  • How do ya get downloadfetcher too auto down load paused downloads too cut on and down load one at time have slow computer wont download but one at time

    was told by friend something about an addon or a way when ya have muptable downloads in download area that they can be stored and then cut on or set up somehow where ya can turn on where all the downloads that are on pause mode can be down loaded one at a time have old and slow computer cant down load two or more at one time thonkssssssss

    Hi Magsrobby,
    Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Time machine slows computer

    When TM does its hourly thing the computer slows dramatically for abut 5 minutes. Is it supposed to?
    If this is correct, is there a way I can ask TM to forget the hourly back up and do a daily only?
    Geoff

    on an older and slower computer like yours (your profile indicates 1GHz iMac G4) this will happen, yes. I had this problem with my powerbook. Try [TimeMachineEditor|http://timesoftware.free.fr/timemachineeditor> to change the backup intervals.

  • Blackberry runs slower every time!?

    When i synchronize my bb with my computer, it seems like it runs slower and slower every time {moving from screen to screen, or sending messages}. why is this? i found that if i reset it often, it helps, but i do not want to have to do this everytime! help!
    thanks!

    You're lucky I'm so nice and zipped the files for you lol...j/k. Unzip the files to your media card, browse to the folder and open the .jad file. It should install it for you. This version is for OS 4.5 which I'm guessing you have.
    Enjoy!
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • Page not found, slow loading times CC Files

    Hi,
    Two weeks ago I reported that there were CC files problems like 'page not found' errors and slow loading times and pages not even showing anything. Those problems were temporarily resolved but are back as of today.
    Please fix this because for me this is not workable and I guess for many others. I've already moved part of my design files away from CC Files and am now reaching the point were I want to abandon this beta-ware altogether.
    I'm living in Europe, maybe this gives additional info. Maybe server problems only in this continent?
    Thanks for looking into this.
    Jan

    So what product would you advice me to file this bug report under? There is no Creative Cloud Files entree or similar.
    I'm not sure I'm taken by Adobe support channels policies. if I tweet a complaint some employee tell me I'll be called back by support. Instead of being called back I get asked per email to report on the community forums, when I post on the forum someone tells me to file a bug report. Ehhh...
    Time to move on.
    Jan

Maybe you are looking for

  • Encore CS3 submenus not looping - in regular DVD player?

    Hi all, I have a SD PAL project, 1 main movie, 1 main menu and 2 submenus. The total data is around 4,1 GB. My submenus have a video background which lasts for 45 seconds. I have set up the submenus play over again by setting the "end action" back to

  • VGA VIDEO CONTROLLER DRIVER

    I have downloaded all my Drivers except one that is called,"Video Controller VGA compatible". Can you please help me or be able to give me a link to get this driver.Computer Hp Compac Presario  SR1739IT, here nobody knows how to get this driver. Than

  • Unsupported third party add ons

    Safari has difficulty in loading and it is suggested that this is due to "Unsupported third party add ons". How do I find what "Unsupported third party add ons" I have on my computer

  • Mapping shipment 05 idoc

    hi experts,                  we have a scenario to map shipment 05 idoc to delivery 05 idoc. there will be one or more handling units in source idoc.for every handling unit in shipment 05 we should map respective article information to seperate deliv

  • Physical Standby Database (Protection Mode)?!!

    Hi, I have configured a physical standby database to use Real-time Apply, but i noticed that the protection mode of the database has been changed from "Maximum Performance" to ''Maximum Availability".. log_archive_dest_3='service=phystby OPTIONAL LGW