AIA COM 2.0.1 Vs AIA COM 2.4

Hi All,
What are the functionalities that are added in the AIA COM 2.4 PIP which were not present in AIA COM 2.0.1 PIP?
What are the new features we are using in the AIA COM 2.4 PIP?
Is AIA COM 2.0.1 upgradable to 2.4?
Thanks,
Shanty

Hi Shanty,
These questions are answered in 2.4 release notes. You can find the AIA Documentation library here.
Regards
Rohit

Similar Messages

AIA PIP 11.1 - COM to SOM integration

We need to integrate OSM-COM & OSM-SOM using AIA PIP 11.1
So we have doenloaded:
Oracle Application Integration Architecture Pre-built Integrations 11.1 Release (part # V28086-01)
During the development therewill be no CRM in our environment.
Since there is no PIP exists only for OSM-COM & OSM-SOM, so we decided to use:
Siebel CRM Integration Pack for Oracle Order Management
However as I mentioned that we do not have CRM in our development environment
So My question is:
1> Did we choose the right PIP?
2> How to install the PIP without CRM details OR if it is possible to give some Dummy Data (which doesn't exist) for CRM during PIP install.

We need to integrate OSM-COM & OSM-SOM using AIA PIP 11.1
So we have doenloaded:
Oracle Application Integration Architecture Pre-built Integrations 11.1 Release (part # V28086-01)
During the development therewill be no CRM in our environment.
Since there is no PIP exists only for OSM-COM & OSM-SOM, so we decided to use:
Siebel CRM Integration Pack for Oracle Order Management
However as I mentioned that we do not have CRM in our development environment
So My question is:
1> Did we choose the right PIP?
2> How to install the PIP without CRM details OR if it is possible to give some Dummy Data (which doesn't exist) for CRM during PIP install.

AIA for COMS PIPs

Hi All,
From Oracle product evaluation perspectives, I would like to know the PIPs(Process integration packages) available in Oracle AIA specifically for COMMS.
Does the Oracle communications(OSS/BSS) software’s like ASAP, OSM etc are integrated with the AIA framework?
Secondly are the PIPs available for Telecom process which cater to Areas like OSS/BSS.

Hi All,
From Oracle product evaluation perspectives, I would like to know the PIPs(Process integration packages) available in Oracle AIA specifically for COMMS.
Check this:
http://www.oracle.com/us/industries/communications/order-activate-integration-pack-ds-315067.pdf
Does the Oracle communications(OSS/BSS) software’s like ASAP, OSM etc are integrated with the AIA framework?
YES it is integrated with AIA.
Secondly are the PIPs available for Telecom process which cater to Areas like OSS/BSS.
I recommend you download the information from https://edelivery.oracle.com in the Package: Oracle comunications Applications there is the information about all the aplications included OSM in versions like 7.0 7.1 7.2 and the much information about how to install and how to use.
Regards.
Lucas.

Is BSR comes with Soa Suite 10.1.3.1 or 10.1.3.3 Patch or AIA FP or Apserv?

At what level of installing .. BSR available for using ?
Application Server
or
Soa Suite 10.1.3.1
or
Upgrade Soa Suite from 10.1.3.1 to 10.1.3.3 By applying 10.1.3.3 Patch
or
AIA Foundation Pack
Edited by: sridhar rachumallu on Nov 22, 2008 11:15 PM

AIA Foundation Pack

Question about Kurts comments discussing the seperation of AIA & CDP - Test Lab Guide: Deploying an AD CS Two-Tier PKI Hierarchy - Kurt L Hudson MSFT

Question about the sentence in bold. What is the meaning behind this comment?
How would you separate the role of the AIA and CDP from a CA subordinate server? I can see where I add a CES and CEP server which has those as well, but I don't completely understand his comment. Because in this second step, (http://technet.microsoft.com/en-us/library/tlg-key-based-renewal.aspx)
he shows how to implement CES and CEP.
This is from the guide located at: http://technet.microsoft.com/library/hh831348.aspx
Step 3: Configure APP1 to distribute certificates and CRLs
In the extensions of the root CA, it was stated that the CRL from the root CA would be available via http://www.contoso.com/pki. Currently, there is not a PKI virtual directory on APP1, so one must be created.
In a production environment, you would typically separate the issuing CA role from the role of hosting the AIA and CDP.
However, this lab combines both in order to reduce the number of resources needed to complete the lab.
Thanks,
James

My concern is, they have a 2-3k base of xp systems, over this year they are migrating them to Windows 7. During this time they will also be upgrading hardware for the existing windows 7 machines. The turnover of certificates are going to be high, which
from what I've read here, it worries me.
http://blogs.technet.com/b/askds/archive/2009/06/24/implementing-an-ocsp-responder-part-i-introducing-ocsp.aspx
The application then can go to those locations to download the CRL. There are, however, some potential issues with this scenario. CRLs over time can get rather large
depending on the number of certificates issued and revoked. If CRLs grow to a large size, and many clients have to download CRLs, this can have a negative impact on network performance. More importantly, by
default Windows clients will timeout after 15 seconds while trying to download a CRL. Additionally,
CRLs have information about every currently valid certificate that has been revoked, which is an excessive amount of data given the fact that an application may only need the revocation status for a few certificates. So,
aside from downloading the CRL, the application or the OS has to parse the CRL and find a match for the serial number of the certificate that has been revoked.
With the above limitations, which mostly revolve around scalability, it is clear that there are some drawbacks to using CRLs. Hence, the introduction of Online Certificate
Status Protocol (OCSP). OCSP reduces the overhead associated with CRLs. There are server/client components to OCSP: The OCSP responder, which is the server component, and the OCSP Client. The OCSP Responder accepts status
requests from OCSP Clients. When the OCSP Responder receives the request from the client it then needs to determine the status of the certificate using the serial number presented by the client. First the OCSP Responder determines if it has any cached responses
for the same request. If it does, it can then send that response to the client. If there is no cached response, the OCSP Responder then checks to see if it has the CRL issued by the CA cached locally on the OCSP. If it does, it can check the revocation status
locally, and send a response to the client stating whether the certificate is valid or revoked. The response is signed by the OCSP Signing Certificate that is selected during installation. If the OCSP does not have the CRL cached locally, the OCSP Responder
can retrieve the CRL from the CDP locations listed in the certificate. The OCSP Responder then can parse the CRL to determine the revocation status, and send the appropriate response to the client.

Error when deploying AIA Demo BPEL project to SAR file

Hi,
I am trying to deploy the AIADemoCreateRequestForQuoteSupplierProvABCSImpl project (in AIA Demo) to a SAR file, and I am getting this error:
Buildfile: /scratch/ifan/jdevhome_5912/jdeveloper/bin/ant-sca-compile.xml
scac:
[scac] Validating composite "/ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/composite.xml"
[scac] INFO: SchemaManager.isIncrementalBuildSupported XMLSchema incremental build enabled.
[scac] Setting BPELC option 'classpath' to /scratch/ifan/jdevhome_5912/jdeveloper/jdev/extensions/oracle.sca.modeler.jar:/scratch/ifan/jdevhome_5912/jdeveloper/soa/modules/oracle.soa.fabric_11.1.1/fabric-runtime.jar:/scratch/ifan/jdevhome_5912/jdeveloper/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/scratch/ifan/jdevhome_5912/oracle_common/modules/oracle.fabriccommon_11.1.1/fabric-common.jar:/scratch/ifan/jdevhome_5912/jdeveloper/soa/modules/oracle.soa.bpel_11.1.1/orabpel.jar:/scratch/ifan/jdevhome_5912/jdeveloper/soa/modules/oracle.soa.mediator_11.1.1/mediator_client.jar:/scratch/ifan/jdevhome_5912/oracle_common/modules/oracle.mds_11.1.1/mdsrt.jar::/ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF\classes
[scac] Composed "AIADemoCreateRequestForQuoteSupplierProvABCSImpl" in 92.9 milliseconds [nodes 56=1+55, 602.9 nodes/sec]
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe14.java:699: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe14.java:708: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe4.java:205: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe12.java:634: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe12.java:646: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe3.java:178: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe9.java:400: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe9.java:409: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe7.java:360: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe10.java:482: package oracle.apps.aia.core.config does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe10.java:485: package oracle.apps.aia.core.config does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe10.java:489: package oracle.apps.aia.core.config does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe10.java:523: package oracle.apps.aia.core.config does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe10.java:526: package oracle.apps.aia.core.config does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe10.java:540: package oracle.apps.aia.core.config does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe10.java:543: package oracle.apps.aia.core.config does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe2.java:154: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe11.java:601: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe11.java:613: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe1.java:131: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe6.java:298: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe15.java:727: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe5.java:274: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe0.java:109: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe13.java:673: package oracle.apps.aia.core.eh.logging does not exist
[scac] /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/ExecLetBxExe13.java:682: package oracle.apps.aia.core.eh.logging does not exist
[scac] Note: /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF/bpel/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/src/orabpel/aiademocreaterequestforquotesupplierprovabcsimpl/BPEL_BIN.java uses unchecked or unsafe operations.
[scac] Note: Recompile with -Xlint:unchecked for details.
[scac] warning: in AIADemoCreateRequestForQuoteSupplierProvABCSImpl.bpel(210): <from> value type "{http://www.w3.org/2001/XMLSchema}string" is not compatible with <to> value type "{http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2}CodeType"
[scac] warning: in AIADemoCreateRequestForQuoteSupplierProvABCSImpl.bpel(210): <from> value type "{http://www.w3.org/2001/XMLSchema}string" is not compatible with <to> value type "{http://xmlns.oracle.com/EnterpriseObjects/Core/Common/V2}TextType"
[scac] warning: in AIADemoCreateRequestForQuoteSupplierProvABCSImpl.bpel(557): <from> value type "{http://www.w3.org/2001/XMLSchema}string" is not compatible with <to> value type "{http://schemas.xmlsoap.org/ws/2003/03/addressing}AttributedURI"
*[scac] error: location {ns:composite}: SCAC-50012*
BUILD FAILED
/scratch/ifan/jdevhome_5912/jdeveloper/bin/ant-sca-compile.xml:269: Java returned: 1 Check log file : /ade/ifan_nov29/aiafp/apps/fp/components/samples/AIADemo/ProviderABCS/AIADemoCreateRequestForQuoteSupplierProvABCSImpl/SCA-INF\classes/scac.log for errors
Total time: 16 seconds
In particular, we keep seeing the compilation fail with error "SCAC-50012" have not seen helpful information on how to resolve that.
The log file:
Jan 7, 2011 7:05:50 PM oracle.mds
WARNING: The default CharSet US-ASCII is not a unicode character set. File names with non-ASCII characters may not operate as expected. Check locale settings.
Jan 7, 2011 7:05:51 PM oracle.adf.share.ADFContext getCurrent
WARNING: Automatically initializing a DefaultContext for getCurrent.
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
Jan 7, 2011 7:05:55 PM com.collaxa.cube.CubeLogger info
INFO: validating "AIADemoCreateRequestForQuoteSupplierProvABCSImpl.bpel" ...
oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
at oracle.integration.platform.blocks.WLSPlatformConfigurationProvider.<clinit>(WLSPlatformConfigurationProvider.java:44)
at oracle.integration.platform.blocks.FabricConfigManager.<clinit>(FabricConfigManager.java:154)
at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.loadXpathFunctions(FabricXPathFunctionResolver.java:282)
at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.loadXPathConfigFile(FabricXPathFunctionResolver.java:156)
at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.init(FabricXPathFunctionResolver.java:49)
at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.loadFabricXpathFunctions(BPELXPathFunctionNameResolver.java:57)
at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.<init>(BPELXPathFunctionNameResolver.java:48)
at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.<clinit>(BPELXPathFunctionNameResolver.java:44)
at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.<init>(XPathExprValidatorVisitor.java:122)
at com.collaxa.cube.lang.compiler.bpel.AssignValidator.<init>(AssignValidator.java:89)
at com.collaxa.cube.lang.compiler.bpel.BpelParser.<init>(BpelParser.java:452)
at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validate(BPELValidator.java:60)
at com.collaxa.cube.lang.compiler.BPEL1Processor.validate(BPEL1Processor.java:329)
at com.collaxa.cube.lang.compiler.BPEL1Processor.process(BPEL1Processor.java:153)
at com.collaxa.cube.lang.compiler.CubeParserHelper.compile(CubeParserHelper.java:47)
at oracle.fabric.bpel.bpelc.BPELComponentValidator.validate(BPELComponentValidator.java:40)
at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1117)
at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:500)
at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
Jan 7, 2011 7:06:01 PM CubeProcessGenerator compile
<< and then long classpath >>
Any ideas on how to resolve this issue and deploy the project? Thanks in advance.
Irene

Here are some alternatives:
1.Consider creating an application server connection and select deploy to your new application server connection, not to sar.
2.Consult for example: SCAC-50012
3. Recompile with -Xlint:unchecked for details
4.Although they seem harmless, get rid of the warnings
5. Consider posting to another forum such as SOA Suite
NA
http://nickaiva.blogspot.com

BPEL Process CurrencyExchangeList BUG or Limitation...its part of Oracle PIPs for AIA,

Hi All,
The BPEL process CurrencyExchangeListEbizJMSProducer is a Oracle standard process (PIPs) , but still we are getting the error.
The below error in red I took from server log file.
We are getting an error in Production environment while a BPEL process producing (enqueue) a message to a JMS queue by using JMS adapter. (partener link)
We are using Orcacle 10G SOA suite with OC4J server and AIA 10G.
Please note that we are not getting this error every time, few BPEL instances are getting this error, around 4 out of 10 instances.
Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=file:/sw/appaia/product/SOA/bpel/domains/default/tmp/.bpel_CurrencyExchangeListEbizJMSProducer_1.0_4ec528ec93a8a6ff0278fab9701dcc71.tmp/CurrencyExchangeListEbizJMSProducerV1.wsdl [ Produce_Message_ptt::Produce_Message(OutputParameters) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Adapter Framework unable to create outbound JCA connection.
file:/sw/appaia/product/SOA/bpel/domains/default/tmp/.bpel_CurrencyExchangeListEbizJMSProducer_1.0_4ec528ec93a8a6ff0278fab9701dcc71.tmp/CurrencyExchangeListEbizJMSProducerV1.wsdl [ Produce_Message_ptt::Produce_Message(OutputParameters) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: oracle.j2ee.connector.proxy.ProxyInterceptException: javax.resource.ResourceException: RollbackException: Transaction has been marked for rollback: null [Caused by: RollbackException: Transaction has been marked for rollback: null]
; nested exception is:
ORABPEL-12511
Adapter Framework unable to create outbound JCA connection.
I tried all the below JMS tunings with different combination, but not no improvement.
<property name="useJCAConnectionPool">true</property>
<property name="maxSizeJCAConnectionPool">500</property>
<property name="retryMaxCount">10</property>
<property name="retryInterval">60</property>
First we are taking these messages from BPEL_Q_TAB (business event) by Apps adapter then sending to JMS Queue. So, throttling also not working as this is apps adapter.
I tried "minimumDelayBetweenMessages">1000</property> in the apps adapter while consume the message from Business Event Q (BPEL_Q_TAB).
But it didn’t work, there was no delay happened while picking the messages.
Please let me know if there is any fix for this issue, otherwise pls let me know is there any way to throttle the apps adapter.
Thanks,
Pershad

Hi Lonneke
Thanks for responding....
You are correct in seeing that the two services are different in name.
However they are identical in function.
I created the service POSyncComp in my earlier version of JDev and deployed it to my local OC4J.
Which is launched by a PeopleSoft call using PeopleCode.
I have now rewritten this service in my new JDev and called it POSyncCompInt and deployed to home in an SOA suite implementation.
So whilst I test and before I roll the original service call out, I have both.
I have duplicated the PeopleCode and tweaked the message call, so that for testing purposes, and before I drop the current working version I have both calls in my PeopleCode event.
The original POSyncComp call still works, but the call to the 'new replacement' does not.
Hence the log shows both calls.... with slightly different names.
The strange thing is that the PeopleSoft LOG shows very similar code in the Request Message, but the response from the new call shows the HTML Form that I get if I run the second BPEL process from the SOA BPEL console.
So it looks like it is addressing the URL correctly.... but it suggests that stand alone OC4J returns a different response to the SOA suite which I am using for the new version of the BPEL process.... Is this configuration ?
It hints at the xsd file and the complex message type at entry to the BPEL process.
I can run the new process from the SOA suite BPEL Console with no problems.
I hope that clarifies your question about two different service names

Is there any way to achieve dynamic end point in SOA 11g (non-AIA process)

Hi,
We are using SOA Suite 11.1.1.5.0 and we are not using AIA product..Is there any mechanism to achieve dynamic end point?If so can you please tell me how we can achieve this.
Thanks in advance.

Hi All,
We can achieve dynamic end point in oracle soa suite 11g
Check the below link
https://blogs.oracle.com/ateamsoab2b/entry/invoking_web_services_dynamically_in
regards
Shankari

Installing AIA FP 2.4 on SOA Suite 10.1.3.4 with Weblogic 9.2 failed

Hi,
While Installing AIA FP 2.4 on Weblogic 9.2 using FPWLInstall.xml,
I got the following Error..
BUILD FAILED
D:\AIA_HOME\Infrastructure\install\wlscripts\FPWLInstall.xml:218: The following error occurred while executing this line:
D:\AIA_HOME\Infrastructure\install\wlscripts\FPWLInstall.xml:226: The following error occurred while executing this line:
D:\AIA_HOME\Infrastructure\install\wlscripts\FPWLDeployment.xml:17: The following error occurred while executing this line:
D:\AIA_HOME\Infrastructure\install\wlscripts\FPWLDeployment.xml:29: The following error occurred while executing this line:
D:\AIA_HOME\Infrastructure\install\wlscripts\FPWLErrorHandlingInstall.xml:140: The following error occurred while executing this line:
D:\AIA_HOME\Infrastructure\ErrorHandling\AIAReadJMSNotificationProcess\build.xml:209: A problem occured while connecting to server "localhost" using port "9700": bpel_aiareadjmsnotificationprocess_1.0.jar failed to deploy. Exception message is: Could not initialize activation agent.
An error occured while initializing an activation agent for process "AIAReadJMSNotificationProcess", revision "1.0".
Please ensure that the activation agents are configured correctly in the bpel deployment descriptor (bpel.xml).
oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: ORABPEL-12517
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter was unable to activate the endpoint :{} due to the following reason: ORABPEL-12561
Unable to locate the JCA Resource Adapter via WSDL port element jca:address.
*The Adapter Framework is unable to startup the Resource Adapter specified in the WSDL jca:address element: {http://xmlns.oracle.com/pcbpel/wsdl/jca/}address: location='eis/Jms/AIA_ERROR_JMS'*
The reason for this is most likely that either
*1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic J2EE Application server or*
*2) the JNDI location setting in the WebLogic JCA deployment descriptor has not been set to eis/Jms/AIA_ERROR_JMS. In the last case you might have to add a new 'connector-factory' entry (connection) to the deployment descriptor.*
Please correct this and then restart the BPEL/WebLogic Application Server
Please correct the reported issue and redeploy the BPEL process.
Please help.

pls see http://bit.ly/ozJqoz , in case you have missed some steps.

Issue with AIA XPath Functions while compiling in JDeveloper 11.1.1.2.0

Hi,
BPEL flow contains Assign activity as below :
<assign name="Assign_1"><copy><from expression='aia.getServiceProperty("{http://xmlns.oracle.com/ABCSImpl/SAP/Core/UpdateItemListSAPReqABCSImpl/V1}UpdateItemListSAPReqABCSImpl","Default.SystemID",true())'/>
<to variable="temp"/></copy> </assign>
When I try to compile this flow, it gives me below errors :
SOALog:
Buildfile: D:\Oracle\Middleware\jdeveloper\bin\ant-sca-compile.xml
scac:
[scac] Validating composite : 'D:\test\TestAIAFunc\composite.xml'
[scac] FATAL_ERROR: in TestAIABPELProcess.bpel(81): unresolved xpath function
[scac] could not resolve xpath function "aia.getServiceProperty", because function "aia.getServiceProperty" not registered.
[scac] Make sure this function is either in the system xpath function configuration file or in the custom xpath function configuration file. Refer to the user guide regarding how to register xpath functions in your compiler environment.
BUILD FAILED
D:\Oracle\Middleware\jdeveloper\bin\ant-sca-compile.xml:264: Java returned: 1 Check log file : D:\test\TestAIAFunc\SCA-INF\classes\scac.log for errors
Total time: 9 seconds
CompilerLog:
Project: D:\test\TestAIAFunc\TestAIAFunc.jpr
D:\test\TestAIAFunc\TestAIABPELProcess.bpel
Error(81): unresolved xpath function
could not resolve xpath function "aia.getServiceProperty", because function "aia.getServiceProperty" not registered.
Make sure this function is either in the system xpath function configuration file or in the custom xpath function configuration file. Refer to the user guide regarding how to register xpath functions in your compiler environment.
I got latest aia.jar from server(SOA11.1.1.2, weblogic 10.3.2, AIA11gR1) and added aia.jar @ JDeveloper 11.1.1.2--> Tools--> Preferences--> SOA
I also added it in jdeveloper/lib, jdeveloper/jdev/lib
aia namespace is there in .bpel as : xmlns:aia="http://www.oracle.com/XSL/Transform/java/oracle.apps.aia.core.xpath.AIAFunctions"
Thanks,
Hema

You have to include the aia.jar file. I had same issue .. I had aia.jar included in the project but the file was not ther ein the path . so i updated the correct path .. it worked

Problem with Business Process Publisher and AIA

After installing AIA 11.1.1.5, I installed the Business Process Publisher following the instructions in the AIA Installation Guide at http://download.oracle.com/docs/cd/E21764_01/aia.htm, sec. 8.3: "Manually uploading reference process models to business process publisher".
Since I could not find the Publisher installation files in the AIAFP install I downloaded from OTN, I used the Publisher installation files from the BPA OTN download (files Oracle_BPA_Suite_11.1.1.4_OTN_1of2.zip and Oracle_BPA_Suite_11.1.1.4_OTN_2of2.zip - I did not install BPA before installing Publisher).
Now when I launch Publisher the login page says "Currently, no exports are available. You can only log in to the administration area at this time". If I login, the new page does not show any AIA contents, only the message "There are currently no profiles available". (I am not sure which “exports” and “profiles” it is talking about).
Evidently something is missing, but I cannot figure out what.
Thank you,
Ugo

"Todd Bradfute" <[email protected]> wrote:
>
I'm trying to run the Business Process Tutorial (http://e-docs.bea.com/workshop/docs81/doc/en/integration/tutorial/tutWLIProcessCreateApp.html?skipReload=true#1025634)
in WebLogic Workshop 8.1 (Build 2003.0710.190003) and I'm having trouble
with
the part that says:
In the New Application dialog box, select Tutorial in the left pane,
and select
Tutorial: Process Application in the right pane.
In my setup, the New Application window has only "All" in the left pane.
And it
doesn't have anything "Tutorial" related in the right pane.
Any suggestions?
Thanks
-TAB
Hi TAB--
When you installed the platform, did you install the whole thing, or just part
of it? If you chose not to install the examples, or if you chose not to install
Integration, that would explain this behavior. If not, we'll try to go from there...
Thanks,
Mike

Urgent! AIA 2.2.1 deployment fails on weblogic 9.2

Hi,
I have installed SOA 10.1.3.1 advanced installation with 10.1.3.4 patch on weblogic 9.2 and its working fine and now am trying to install AIA 2.2.1 (not doing the complete installation, just copying the AIA software as that is the requirement for AIA on weblogic) on the same platform and when i run the command ant -buildfile FPWLInstall.xml for the foundation pack installation am getting the following error.
The build message was from the FPInstall log file. we are running weblogic 9.2 MP3.
now am getting the following error in the FPWLInstall log file:
CreateDatasources:
CreateCommonDatasources:
createConnectionPool:
[echo] creating ConnectionPool AIAConnectionPool
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
createXAConnectionPool:
[echo] creating ConnectionPool AIAXAConnectionPool
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
createAIADataSource:
[echo] Adding ManagedDataSource AIADataSource
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
createXrefDataSource:
[echo] Adding ManagedDataSource XREFDataSource
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
createDiagnosticQueue:
[echo] ----Creating Diagnostics Queue--------------
[sql] Executing file: D:\aiahome\Infrastructure\install\seeddata\DatabaseObjects\createDiagnosticQueue.sql
[sql] Failed to execute: BEGIN sys.dbms_aqadm.create_queue_table ( queue_table => 'AIA_DIGNST_QUEUE_TBL' , queue_payload_type => 'SYS.AQ$_JMS_TEXT_MESSAGE' , sort_list => 'ENQ_TIME' , comment => '' , multiple_consumers => FALSE , message_grouping => DBMS_AQADM.NONE , compatible => '8.1' , primary_instance => '0' , secondary_instance => '0'); COMMIT; END;
[sql] java.sql.SQLException: ORA-24001: cannot create QUEUE_TABLE, AIA.AIA_DIGNST_QUEUE_TBL already exists
[sql] ORA-06512: at "SYS.DBMS_AQADM_SYS", line 2822
[sql] ORA-06512: at "SYS.DBMS_AQADM", line 58
[sql] ORA-06512: at line 1
[sql] Failed to execute: BEGIN sys.dbms_aqadm.create_queue( queue_name => 'AIA_DIGNST_QUEUE' , queue_table => 'AIA_DIGNST_QUEUE_TBL' , queue_type => sys.dbms_aqadm.NORMAL_QUEUE , max_retries => '5' , retry_delay => '0' , retention_time => '0' , comment => ''); END;
[sql] java.sql.SQLException: ORA-24006: cannot create QUEUE, AIA.AIA_DIGNST_QUEUE already exists
[sql] ORA-06512: at "SYS.DBMS_AQADM_SYS", line 3127
[sql] ORA-06512: at "SYS.DBMS_AQADM", line 119
[sql] ORA-06512: at line 1
[sql] 1 of 3 SQL statements executed successfully
CommonConfigurations:
replaceServerDetails:
[copy] Copying 1 file to D:\aiahome\Infrastructure\install\wlscripts
CreateStartupClasses:
[copy] Copying 9 files to D:\aiahome\Infrastructure\install\wlscripts
[java] Using existing user key file...
[java] Using existing user key file...
[java] Using existing user key file...
[mkdir] Created dir: D:\bea\user_projects\domains\SOADomain\AIAaqfiles
[copy] Copying 9 files to D:\bea\user_projects\domains\SOADomain\AIAaqfiles
[delete] Deleting 6 files from D:\aiahome\Infrastructure\install\wlscripts
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
[wlconfig] Ok
stopServer:
[echo] .;D:\product\10.1.3.1\OracleAS_2/bpel/lib/connector15.jar;D:\product\10.1.3.1\OracleAS_2/bpel/lib/oracle_http_client.jar;D:\product\10.1.3.1\OracleAS_2/j2ee/home/oc4jclient.jar;D:\product\10.1.3.1\OracleAS_2/bpel/lib/orawsdl.jar;D:\product\10.1.3.1\OracleAS_2/bpel/lib/orabpel.jar;D:\product\10.1.3.1\OracleAS_2/bpel/lib/orabpel-common.jar;D:\product\10.1.3.1\OracleAS_2/bpel/lib/orabpel-common.jar;D:\product\10.1.3.1\OracleAS_2/bpel/lib/orabpel-thirdparty.jar;D:\product\10.1.3.1\OracleAS_2/integration/esb/lib/commons-logging.jar;D:\product\10.1.3.1\OracleAS_2/integration/esb/lib/commons-codec-1.3.jar;D:\product\10.1.3.1\OracleAS_2/j2ee/home/admin_client.jar;D:\aiahome/Infrastructure/install/applications/ESBErrorListenerMDB.jar;d:/bea/weblogic92/server/lib/weblogic.jar;d:/bea/weblogic92/server/lib/ant/ant-weblogic.jar
[wlst] <WLSTTask> Loaded and set the properties from D:\aiahome/Infrastructure/install/wlscripts/server.properties
[wlst] <WLSTTask> The script that will be executed
[wlst] Connecting to t3://localhost:9700 with userid weblogic ...
BUILD FAILED
D:\aiahome\Infrastructure\install\wlscripts\FPWLInstall.xml:96: The following error occurred while executing this line:
D:\aiahome\Infrastructure\install\wlscripts\FPWLInstall.xml:106: The following error occurred while executing this line:
D:\aiahome\Infrastructure\install\wlscripts\FPWLConfiguration.xml:97: The following error occurred while executing this line:
D:\aiahome\Infrastructure\install\wlscripts\FPWLConfiguration.xml:69: The following error occurred while executing this line:
D:\aiahome\Infrastructure\install\wlscripts\FPWLConfiguration.xml:43: Traceback (innermost last):
File "D:\aiahome\Infrastructure\install\wlscripts\stopServer.py", line 3, in ?
File "<iostream>", line 22, in connect
WLSTException: 'Error occured while performing connect : Error getting the initial context. There is no server running at t3://localhost:9700 Use dumpStack() to view the full stacktrace'
Total time: 1 minute 47 seconds
This is due to the error while starting the Oracle SOA Server in the weblogic console which is failing with the following exception:
####<Jun 1, 2009 3:23:34 PM GMT+05:30> <Info> <WebLogicServer> <B4B-2F-011-FZVS> <OracleSOAServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243850014642> <BEA-000287> <Invoking startup class: com.oracle.oems.weblogic.AQJMSStartupClass.startup(AQJMSPropertiesFile=jmsuserjndi.properties,AQJMSPasswordFile=jmsuser_password.properties,AQJMSSecretFile=jmsuser_secretfile.dat,AQJMSConfigDirectory=D:/bea/user_projects/domains/SOADomain/AIAaqfiles)>
####<Jun 1, 2009 3:23:34 PM GMT+05:30> <Info> <WebLogicServer> <B4B-2F-011-FZVS> <OracleSOAServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243850014642> <BEA-000288> <com.oracle.oems.weblogic.AQJMSStartupClass reports: SUCCESS: Bound the following Oracle AQ objects into WebLogic JNDI:
XAQueueConnectionFactory -> AQJMS_JMSUSER_XAQueueConnectionFactory
QueueConnectionFactory -> AQJMS_JMSUSER_QueueConnectionFactory
XATopicConnectionFactory -> AQJMS_JMSUSER_XATopicConnectionFactory
TopicConnectionFactory -> AQJMS_JMSUSER_TopicConnectionFactory
XAConnectionFactory -> AQJMS_JMSUSER_XAConnectionFactory
ConnectionFactory -> AQJMS_JMSUSER_ConnectionFactory
>
####<Jun 1, 2009 3:23:34 PM GMT+05:30> <Info> <WebLogicServer> <B4B-2F-011-FZVS> <OracleSOAServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243850014642> <BEA-000287> <Invoking startup class: com.oracle.oems.weblogic.AQJMSStartupClass.startup(AQJMSPropertiesFile=oraesbjndi.properties,AQJMSPasswordFile=oraesb_password.properties,AQJMSSecretFile=oraesb_secretfile.dat,AQJMSConfigDirectory=D:/bea/user_projects/domains/SOADomain/AIAaqfiles)>
####<Jun 1, 2009 3:23:34 PM GMT+05:30> <Critical> <WebLogicServer> <B4B-2F-011-FZVS> <OracleSOAServer> <Main Thread> <<WLS Kernel>> <> <> <1243850014753> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
com.oracle.oems.weblogic.AQJMSException: Failed to get Oracle AQ destinations: JMS-232: An invalid user/password was specified for the JMS connection
javax.jms.JMSSecurityException: JMS-232: An invalid user/password was specified for the JMS connection
at oracle.jms.AQjmsDBConnMgr.checkForSecurityException(AQjmsDBConnMgr.java:868)
at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:580)
at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:169)
at oracle.jms.AQjmsConnection.<init>(AQjmsConnection.java:162)
at oracle.jms.AQjmsTopicConnectionFactory.createTopicConnection(AQjmsTopicConnectionFactory.java:287)
at com.oracle.oems.weblogic.AQJMSStartupClass.startup(AQJMSStartupClass.java:458)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeStartup(ClassDeploymentManager.java:278)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:256)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployment(ClassDeploymentManager.java:198)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.runStartupsBeforeAppDeployments(ClassDeploymentManager.java:145)
at weblogic.management.deploy.classdeployment.ClassDeploymentService.start(ClassDeploymentService.java:20)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
at com.oracle.oems.weblogic.AQJMSStartupClass.startup(AQJMSStartupClass.java:473)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeStartup(ClassDeploymentManager.java:278)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:256)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployment(ClassDeploymentManager.java:198)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.runStartupsBeforeAppDeployments(ClassDeploymentManager.java:145)
at weblogic.management.deploy.classdeployment.ClassDeploymentService.start(ClassDeploymentService.java:20)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Thanks in advance.
Edited by: user10869954 on Jun 8, 2009 12:33 AM
Edited by: user10869954 on Jun 8, 2009 12:35 AM
Edited by: user10869954 on Jun 8, 2009 12:46 AM
Edited by: user10869954 on Jun 8, 2009 1:03 AM

this problem is due to hard-coded user/pwd in installation scripts. Here are steps
1) open file AIA_HOME/Infrastructure/install/wlscripts/FPWLCommonConfig.xml
2) reach to target CreateStartupClasses
3) there are three java tasks for com.oracle.oems.weblogic.AQJMSPasswordUtility
4) in the task for oraesb, password is hardcoded as 'oraesb' in clear text.
5) this should be password of 'ORAESB' database user.
6) change this password value; and restart the installation.
Regards,
Vaibhav

How to use Harvester Only Using HarvesterSettings.xml on aia server

Hi, I have a problem.
I can not fix it.
The following HarvesterSettings.xml I had to use.
<?xml version="1.0" encoding="UTF-8"?>
<tns:harvesterSettings xmlns:tns="http://www.oracle.com/oer/integration/harvester"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/oer/integration/harvester Harvester_Settings.xsd ">
<harvesterDescription>Oracle Enterprise Repository Harvester</harvesterDescription>
<registrationStatus>Registered</registrationStatus>
<namespace/>
<query>
<fileQuery>
<files>E:/Oracle/Middleware/VM3/AIAMetaData/AIAComponents/EnterpriseBusinessServiceLibrary/Core/EBO/ReceivedPayment/V1/ReceivedPaymentEBS.wsdl</files>
<fileType>.wsdl</fileType>
</fileQuery>
</query>
<introspection>
<reader>com.oracle.oer.sync.plugin.reader.file.FileReader</reader>
<writer>com.oracle.oer.sync.plugin.writer.oer.OERWriter</writer>
</introspection>
</tns:harvesterSettings>
The following command I had to use.
e:\>AIAHarvest.bat -partial true -settings HarvesterSettings.xml -mode AIA
When I run the command, the following error occurs.
[main] ERROR com.oracle.aia.AIAHarvester - invalid composite xml
Exception in thread "main" com.oracle.aia.InvalidCompositeException: invalid composite xml
at com.oracle.aia.AIACompositeParser.parseXML<AIACompositeParser.java:732>
at com.oracle.aia.AIAXmlReader.feedToCompositeParser<AIAXmlReader.java:94>
at com.oracle.aia.AIACompositeMain.main<AIACompositeMain.java:62>
at com.oracle.aia.AIAHarvester.main<AIAHarvester.java:94>
E:/Oracle/Middleware/VM3/AIAMetaData/AIAComponents/EnterpriseBusinessServiceLibrary/Core/EBO/ReceivedPayment/V1/ReceivedPaymentEBS.wsdl
is original file when I install FP

cvoelker wrote:
My question is, how you deal with locking of documents saved on the server or how you compare different versions of long documents in case you decide to work on a local copy.
This question was asked and responded several times: we can't do that.
Second, are there any third party tools available
I don't know
or any future plans on Apples side to extend iWork itself or Mac OS X Server to support locking and versioning in iWork documents for true collaboration?
Nobody is allowed to write about Apple projects before the official announcement.
So, if someone is aware of them, he will not respond here !
On my idisk:
<http://idisk.me.com/koenigyvan-Public?view=web>
is a script designed to offer a workaround but I never got complete feedback so I don't know if it behaves correctly (I don't use networks).
You may download:
foriWork:iWork_sharing:iWorksharing.zip
expand it, read the given instructions
apply them on a copy of a document to check its behaviour.
Yvan KOENIG (from FRANCE vendredi 5 décembre 2008 14:32:51)

AIA support for multiple brands implemented in multiple instances of Siebel

Good Day!
I would like to ask whether AIA has the capability to support multiple brands in terms of multiple instances of Siebel and BRM.
I have a client wherein they have a scenario of:
1.) To launch 4 different brands which contain multiple services and it has been decided that anything that holds customer specific data should be all in a separate instance (which would cover SIEBEL, BRM etc.)
2.) It is also a plan to have systems which only contain transactional data (mainly transient information) to have a central deployment platform (This would typically include OSM and AIA)
I've heard that this is possible with AIA but with heavy customization is required to be done. In case for customization, are there any white paper / documentation which talks about this?
So to summarize, here are the key questions:
-- Support of AIA to integrate multiple instances of Siebel, multiple instances of OBRM and single instance of OSM
-- Does AIA PIPS (mainly O2C, AABC) support data models (account, subscription, etc.,) of different services like 2G, 3G, LTE and Enterprise
-- Does AIA support more than 2 level hierarchies
-- Does AIA support charge redirection within the hierarchy
-- Does AIA PIPS support different MACD scenarios like suspend, resume, account movement within & across hierarchies especially for Enterprise Services?
Regards,
Jeff

First off - Have no knowledge of ERPi - Just googled it.
If its any help, we have multiple instances of EBS on the same box, we have seperate DWH (and ODI Work / Master Repos) environments aligned to these instances. An ODI Agent can only communicate with one ODI Work repository, hence we have Multiple Agents so we can use the EBIZ -> DWH pairs simultaneasouly.
Maybe someone will come along and tell us how it could work differently, until then - its works for us!

AIA 3.0 installer fails in step 10 of 11 at Deploy Application Deployments

Hi,
we are trying to install AIA 3.0 on linux environment.
we are getting the following error. Kindly provide inputs if anyone has faced similar issues.
Deployments:
[echo] ======================================
[echo] DeploymentPlan file ="/app/oracle/Middleware/AIAFP30/config/FPInstallDP.xml"
[echo] ======================================
Deployments:
[echo]
[echo]
[echo]
[echo] Deployment log -- /app/oracle/Middleware/AIAFP30/aia_instances/AIAFP30/logs/FPInstallDP_Deployments_2010-02-02_17-12-10.log
[echo]
[echo]
[echo] === Executing Deployments ===
[echo]
[echo]
[xslt] Processing /app/oracle/Middleware/AIAFP30/config/FPInstallDP.xml to /app/oracle/Middleware/AIAFP30/aia_instances/AIAFP30/tmp/AIDExecuteDP_temp_41477337.xml
[xslt] Loading stylesheet /app/oracle/Middleware/AIAFP30/aia_instances/AIAFP30/tmp/AIDExtractxsl_temp_1018895610.xsl
executeDP:
[wlst] @@@ Starting the deployment script ...
[wlst] Connecting to t3://hydhtc70560d.ad.infosys.com:7001 with userid weblogic ...
[wlst] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'SOADomain'.
[wlst]
[wlst] Warning: An insecure protocol was used to connect to the
[wlst] server. To ensure on-the-wire security, the SSL port or
[wlst] Admin port should be used instead.
[wlst]
[wlst] Location changed to edit tree. This is a writable tree with
[wlst] DomainMBean as the root. To make changes you will need to start
[wlst] an edit session via startEdit().
[wlst]
[wlst] For more help, use help(edit)
[wlst] You already have an edit session in progress and hence WLST will
[wlst] continue with your edit session.
[wlst]
[wlst] Starting an edit session ...
[wlst] Started edit session, please be sure to save and activate your
[wlst] changes once you are done.
[wlst] Warning: Unrecognized option stage is being ignored
[wlst] Deploying application from /app/oracle/Middleware/AIAFP30/Infrastructure/Install/applications/AIAHomeApp.ear to targets soa_server1 (upload=true) ...
[wlst] <Feb 2, 2010 5:12:17 PM IST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, AIAHomeApp [archive: /app/oracle/Middleware/AIAFP30/Infrastructure/Install/applications/AIAHomeApp.ear], to soa_server1 .>
[wlst] You have an edit session in progress, hence WLST will not
[wlst] block for your deployment to complete.
[wlst] Started the Deployment of Application. Please refer to the returned WLSTProgress object or variable LAST to track the status.
[wlst] Current Status of your Deployment:
[wlst] Deployment command type: deploy
[wlst] Deployment State : running
[wlst] Deployment Message : no message
[wlst] No stack trace available.
[wlst] Activating all your changes, this may take a while ...
[wlst] The edit lock associated with this edit session is released
[wlst] once the activation is completed.
BUILD FAILED
/app/oracle/Middleware/AIAFP30/Infrastructure/Install/AID/AIAInstallDriver.xml:167: The following error occurred while executing this line:
/app/oracle/Middleware/AIAFP30/Infrastructure/Install/AID/AIAExecuteDriver.xml:106: The following error occurred while executing this line:
/app/oracle/Middleware/AIAFP30/Infrastructure/Install/AID/AIAExecuteDriver.xml:58: The following error occurred while executing this line:
/app/oracle/Middleware/AIAFP30/aia_instances/AIAFP30/tmp/AIDExecuteDP_temp_41477337.xml:11: The following error occurred while executing this line:
/app/oracle/Middleware/AIAFP30/Infrastructure/Install/AID/lib/AIDDeploymentLibraryTasks.xml:90: Traceback (innermost last):
File "/app/oracle/Middleware/AIAFP30/Infrastructure/Install/AID/lib/py/deployApplication.py", line 36, in ?
File "<iostream>", line 376, in activate
File "<iostream>", line 1744, in raiseWLSTException
WLSTException: Error occured while performing activate : Error while Activating changes. :
Use dumpStack() to view the full stacktrace
Total time: 27 seconds
<Feb 2, 2010 5:12:36 PM IST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
Step Deploy Application Deployments failed
Step Deploy Application Deployments failed
Deploy Application Post-Install

Hi Kanakavally,
I saw the logs and I can see you have several failed attempts. Initially it had to do with AIALifecycle user already present and now it has to do with changes not getting activated.
I suggest you do another attempt at installation after complete cleanup.
Here is what you can do.
1. Click finish and exit out of the current Installer window (if you already have it open)
2. Now launch the deinstaller as per the Installation Guide.
3. Choose the AIA Home and uninstall (the uninstall bar may not be showing the progress but wait for some time and the uninstall will happen. We are fixing the progress bar issue)
4. Once this is done, navigate to weblogic console and click deployments in the left nav.
5. Select all AIA related deployments (if they exist - ideally this will get removed during uninstallation) and click delete
6. Repeat the process for Datasources, JMS modules and JMS resources (again these dont exist ideally after uninstallation)
7. Also navigate to security realms, select your realm (myrealm) and then click on the users and groups tab and remove AIA users and AIA groups
8. Now shutdown the SOA managed server and then shutdown the Admin server as well
9. Start the admin server
10. Open the console, see if you have any changes to activate in the Activation. If there is any activate them. If it doesnt get activated undo all changes.
11. Open the folder Middleware/domains/<your_domain> In this folder remove the file edit.lok.
12. Also under the folder Middleware/domains/<your_domain>/pending , remove all files.
14. Once you have done this restart the SOA Server.
15. Attempt a fresh installation. Ensure that you read all the pre-install steps and instructions in the Install guide carefully before attempting the installation.

AIA COM 2.0.1 Vs AIA COM 2.4

Similar Messages

Maybe you are looking for