Air-cap 3502i White LED no console output

On our department We have 36 lightweight AP 3502i v02 out of the 36 ap only 7 are working fine. And the rest has white LED and no console output, all the AP that working fine are v01.
Basic on the information in the link below, the access points with v02 should be fine. I wondering if anyone who has the same problem with these software or access points.
PID: AIR-CAP3502I-A-K9
VID : v01 , v02
15.2(2)JAX ver
http://www.cisco.com/c/en/us/support/docs/field-notices/635/fn63537.html
thank you

Never saw that before, since when are you running into this problem?
In the 3500 documentation there is no explanation given for the white LED status, so I guess that you have to file a TAC case. The 3500 access-points have limited lifetime warranty, so if they are broken you will receive new ones in about 10 business days (much faster if you have smartnets on them, but not a lot of people do this).

Similar Messages

AIR-3502 show a white LED and no console output.

like the title, i have upgrade the wlc version to 7.4.121.0,but the question didnot resolve.

Must be an old batch of AP.
This is a known defect. Some of us call it the "white LED of death". You may need to RMA the AP.

G5 won't boot. White LED lights when power button is pushed, click heard.

Unlike some other non-booting G5 stories, mine never makes it past this stage. It's a dual 1.8ghz G5 powermac.
The white LED above the power button turns on when the power button is pressed, a click is heard, but it does not go any further. The LED does not flash at all... no grey screen, no hard-drive access, nada.
When I push the power button with the aluminum side removed (but with the transparent insert in place), I can see the fans twitch like they are going to start spinning, but then immediately stop.
I've tried resetting the PMU, replacing the PRAM(CMOS) battery, another identical type of video card, blowing out the dust with compressed air, removing and swapping memory, but always get this same result.
There was some renovation done in the house recently, but the machine was gently wrapped and moved away from the work. However after 2 weeks of sitting there, it now won't start.
Any help is appreciated. If the 'clicking' of the power supply is being heard (also clicks when I plug in the power cord), does that mean the power supply is likely working? In which case, is it likely a logic board issue?
One thing I noticed upon closer inspection, after removing the main fan, is that the higher processor seems darker than the lower one. Is there a way to remove one processor to test for hardware failure?

Hi subculture,
A power supply is not to difficult to replace. The lower processor must be removed. It is much easier to lay the Mac on its side. A used power supply can be found on ebay. There are 2 main power connector that connect to the logic board. Those can be tested with a DC voltage meter against a pinout chart for your particular model and can be found on google.
Powermac G5 2004 Model
Power Supply P1 Connector
Pin# Signal Color ------ Pin# Signal Color
1 +5Vstb Purple --------- 13 GND Black
2 GND Black ------------- 14 Power ON Green
3 FANtach White/Yellow -- 15 GND Black
4 GND Black ------------- 16 Reserved
5 Reserved -------------- 17 GND Black
6 GND Black ------------- 18 RTNaud(GND) Black
7 +12Vaud (12V2) Yellow - 19 GND Black
8 GND Black ------------- 20 +5V sense Red
9 +3.3V sense Orange ---- 21 GND Black
10 GND Black ------------ 22 -12V Blue
11 GND Black ------------ 23 GND Black
12 Reserved ------------- 24 Reserved
Power Supply P2 Connector
Pin# Signal Color ------- Pin# Signal Color
1 +3.3V Orange ----------- 9 +5V Red
2 +3.3V Orange ---------- 10 +5V Red
3 +3.3V Orange ---------- 11 +5V Red
4 +3.3V Orange ---------- 12 +12V3 Yellow
5 Reserve --------------- 13 +12V3 Yellow
6 +12Vfan Yellow -------- 14 +12V1 Yellow
7 +12Vfan(12V2) Yellow -- 15 +12V1 Yellow
8 +25V White ------------ 16 RTNfan(GND) Black
Power Supply P3 Connector
Pin# Signal Color ------- Pin# Signal Color
1 +5V Red ---------------- 5 +5V Red
2 GND Black -------------- 6 GND Black
3 GND Black -------------- 7 GND Black
4 12V2 Yellow ------------ 8 +12V2 Yellow
Regards

Blinking caps and num leds

I shut down my touchsmart tx2-1020us notebook pc for about an hour or two and when i try powering it the caps and num leds only blinks with darkscreen. I av try all i can to make it work but still the blining caps and num leds is all i get. NEEDS HELP

Hello cedibill. I understand that when powering on your notebook you're getting a black screen and the CAPS LOCK/NUM LOCK keys are flashing. Is this correct?
There are multiple different causes of this. The easiest way to determine which error you're getting is to see how many times the CAPS LOCK is blinking. Look at this document and tell me which pattern you are getting.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Colored console output?

Is it possible to change the color of the console output?
Ive seen that in C it is posible and i hope in java too.
i want to write for example errors in RED and Information GREEN and debuginfo WHITE.

The color of the output has nothing (or, little) to do with the language. It has to do with the console. Not all consoles can support color output.
The windows cmd.exe console and some consoles on linux can do color though. The way you activate it is by including escape codes in the output.
It looks like you've already found the info about that.
One way to approach this, would be to write loggers that display colors and use a logging framework. Or to replay the PrintStreams for System.out and System.err with subclasses that know about color.
Just a suggestion.

I want to show console output in my cmd prompt in C# winform application

Hi,
I'm launching the some process in C# .net Winform appliaction. But i couldn't able to see console output on the screen. The process is getting launched but inside cmd prompt window, it is showing nothing. I would like to show something on cmd prompt. Please
help on this.
using (Process comxdcProcess = new System.Diagnostics.Process())
comxdcProcess.StartInfo.FileName = fileName;
comxdcProcess.StartInfo.Arguments = args;
comxdcProcess.StartInfo.RedirectStandardError = true;
comxdcProcess.StartInfo.RedirectStandardOutput = true;
comxdcProcess.StartInfo.UseShellExecute = false;
comxdcProcess.Start();
this.errorComment = comxdcProcess.StandardError.ReadToEnd();
StreamReader myStreamReader = comxdcProcess.StandardOutput;
//// Read the standard output of the spawned process.
this.errorComment = myStreamReader.ReadToEnd();
comxdcProcess.WaitForExit();
click "Proposed As Answer by" if this post solves your problem or "Vote As Helpful" if a post has been useful to you Happy Programming! Hari

@Hariprasadbrk
Do you mean you have use process class to start "cmd prompt" And want to display some output in it?
If so, there is no need to use RedirectStandardOutput property. This property means the output of an application is written to the
Process.StandardOutput stream.
// Setup the process with the ProcessStartInfo class.
ProcessStartInfo start = new ProcessStartInfo();
start.FileName = @"C:\7za.exe"; // Specify exe name not cmd exe.
start.UseShellExecute = false;
start.RedirectStandardOutput = true;
// Start the process.
using (Process process = Process.Start(start))
// Read in all the text from the process with the StreamReader.
using (StreamReader reader = process.StandardOutput)
string result = reader.ReadToEnd();
Console.Write(result);
Output
This section shows the output of the process.
7-Zip (A) 4.60 beta Copyright (c) 1999-2008 Igor Pavlov 2008-08-19
Usage: 7za <command> [<switches>...] <archive_name> [<file_names>...]
[<@listfiles...>]
So you can start a cmd exe.
Please also take a look at the article from codeproject
How to redirect Standard Input/Output of an application
In summary, the shutdown proces is invoked from my application, and it displays the output from the process in RichTextBox control.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can i display console outputs in my form?

Hi,
I have an application which performs some actions like, insert 200 rows in the database. While inserting data i am using <code>
int i=0;
system.out.println ("Insert "+i+" row in database");
i=i+1;
</code>
The output displays on the commnad line.
what i am trying to do is i have a form, which has text area. I want to display the console output "Insert 1 row in database" and next "Insert 2 row in database"..... and soon in the text area. How could i do that?
Thanks in advance!!

Hi Petes,
Thanks for you response. I am very new to java. I just started learning jsp and have bit knowledge of swing. I am confused how to use jsp and swing componenets together. Can you please guide me a bit?
Also i am using AJAX to update form field. I am able to work with the rest except bringing the console output in the text area.
Do you think i have some other way to do it?
Do you think, it is a good idea , if I will save the output strings in a file and with the help of jsp i can read the file in textarea.
Pin2g

How can i display console outputs in my form field?

Hi,
I have an application which performs some actions like, insert 200 rows in the database. While inserting data i am using
int i=0;
system.out.println ("Insert "+i+" row in database");
i=i+1;
The output displays on the commnad line
what i am trying to do is i have a form, which has text area. I want to display the console output "Insert 1 row in database" and next "Insert 2 row in database"..... and soon in the text area. How could i do that?
Thanks in advance!!
pin2g

solution removed, because you crossposted.
Message was edited by:
Navy_Coder

Iphone 4 won't turn on and white LED is lit up

My mom just gave me her old iPhone 4 but its screwed up. I can't tell if its on or off because the screen won't come on and it won't turn on. The white led on the back is constantly lit up. I tried holding the home and lock button but that did nothing. I also tried connecting to itunes and restoring that way but itunes didn't even recognize it.

Hi Gracielle,
Apple Stores do not do service for fees. They do replacements only - in and out of warranty. Out of Warranty Replacements range anywhere from $149 to $225 depending on the device.
Cheers,
GB

How to print console output

Hi, I have a JSP page and I would like to print STDOUT to the page. Is this possible?
I've seen a few methods and none work for me:
BufferedReader reader = new BufferedReader(System.out);
String input = reader.readLine();
out.println(input);*** Error: Type BufferedReader was not found.
FileOutputStream out;
 PrintStream ps; // declare a print stream object
 try {
 // Create a new file output stream
 out = new FileOutputStream("myfile.txt");
 // Connect print stream to the output stream
 ps = new PrintStream(out);
 ps.println ("This data is written to a file:");
 System.err.println ("Write successfully");
 ps.close();
 catch (Exception e){
 System.err.println ("Error in writing to file");
 }*** Error: Duplicate declaration of local variable "out".
*** Error: The type of the left-hand side in this assignment, "javax/servlet/jsp/JspWriter", is not compatible with the type of the right-hand side expression, "java/io/FileOutputStream".
*** Error: No match was found for constructor "PrintStream(javax.servlet.jsp.JspWriter)".
So what's next?
How can I call the console without writing to a file first?
I would like AJAX to show console output in real-time.

Thanks for your help.
The reason I have the script to write to a file is because it's the closest I could find to what I want. Ideally, I would be able to run a script that prints to the console but I want to grab the system.out going to the console and display it on the page.
Basically, I want the page to act as a console but not redirect the output (I want it to still go to the console) and I don't want it in a text file that the page reads.
So for example, the page loads and while that is occurring, the server grabs the console output and prints to the page. Then I run a function on the page that prints to the console and on the refresh, print the updated output. Ideally, I would restrict the output that was relevant to the page's functions and ignore every output to the console but I'm not (trying to be) picky.
So how would that work?
Pseudo-code:
for (int i=0;i < System.out().length(); i++) {
 String grabbedtext += System.out().toString();
}out.println(grabbedtext);

Server console output

Hi,
I have been using flex from last six month. I have develped one application and now its time to deploy the application. But, I am facing one issue regarding server console output. In my application I have various remote call to java class deployed on JBOSS server. My problem is that, whenever I made any remote call the information of that remote call gets printed on server console. I want to stop this server console printing. How can I do this? Please suggest. I have checked in my code, there is no trace() or system.out.println() command is used. Please help me out of this. Its very urgent.
Thanks.
Regards,
Ravindar Kumar

Hi
You can setup properties so that we can save stdout and stderr to files.
In the setDomainEnv.cmd file of your domain, you can set the properties so that the ouput will be saved to a file
%WLS_STDOUT_LOG%
%WLS_STDERR_LOG%
Vimala-

WLC 5508 and AIR CAP 1602I

Hello,
We've got a problem with the AP (AIR CAP 1602I) which is managed by WLC 5508(7.4.100.60)
Users connect to the AP with VOIP phones(Avaya).. and there are following problems during calls
-robot voice
-strong noise(even if call is not made, just speaker is on)
Strange thing is that there is no problem with older APs which are managed with the same WLC.
Any idea?
Thanks in advance

Well that can be a cause also. I would look at using 7.4.110.0 which is MR1. If that doesn't help, then open a TAC case as it might be something else. Going to v7.5 I don't think will fix the issue.
Many times I would go the the manufacture and find out if the support a certain code or not. It's nice when they do test to make sure it still works. Some manufactures do test and will suggest code versions and that's when you have to decide if the 1602 was really needed or just keep adding 1262's since there was only 3 added.
Sent from Cisco Technical Support iPhone App

Create console output from LabView

Hi all.
Is there any way of creating a console string output when calling a dll from LabView?
I have to call a C++ program from LabView and I'm using a dll. I need to debug this program, and I think that using "cout" is the fastest and simplest way.
Thanks in advance.
Regards,
Francisco

No, there is no console output when calling a DLL. You could have your DLL simply write debug information to a log file.

How to see console output in Sun Java(TM) System Web Server 6.1 SP7?

Dear All,
I am having Sun Java(TM) System Web Server 6.1 SP7 installed on Windows 2000 Prof.
I have deployed few applications and they were running successfully.
From debugging point of view, i like to see the output from System.out.println .
Prior to SP7 there is a console which shows this output. But now the batch files only starts and stops the admin and site server services. Where to see for console output?
Is there command like tail.exe of Weblogic awailable for Sun Java System Web Server or any setting to be done in Admin?
Please revert.
-Sameer

Response headers can be found in srvhdrs pblock.
Those can be manipulated by using set-variable
http://docs.sun.com/app/docs/doc/820-1638/6nda01tea?l=en&a=view#abuis
You can read more about these in
Sun Java System Web Server 6.1 SP8 Administrator's Configuration File Reference
http://docs.sun.com/app/docs/doc/820-1638?l=en
and
Sun Java System Web Server 6.1 SP8 NSAPI Programmer's Guide
http://docs.sun.com/app/docs/doc/820-1643?l=en

Re: How do I turn the white LEDs on?

I have seen in pictures that the F50 has white LEDs under each key. How are these turned on?
Thanks

I agree with you. You are wrong.
Anyway, if you check Users manuals and read page 146 you will find description how to do this.
Above the keyboard is placed front operational panel with nine buttons. Third from the right page is Illumination ON/OFF button and you can use it to enable/disable all illuminated buttons and notebook parts (power button, volume dial, etc).
If you start ToshibaHWSetup from Control panel there you can also find tab for illumination and option to enable or disable it.
Please test both options.

Air-cap 3502i White LED no console output

Similar Messages

Maybe you are looking for