AIR-CAP1532I in a non-mesh environment

Hi.
I'm trying to get a CAP1532I working as a "normal access point" and not in a mesh environment.
Is that possible?
If I try to get the AP joining our controller ( 5508 with 7.6.120.0 ), I get these errors:
*Mar  1 00:02:27.495: %CAPWAP-3-ERRORLOG: Go join a capwap controller 
*Aug 20 10:22:44.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: XX peer_port: 5246
*Aug 20 10:22:44.515: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: XX peer_port: 5246
*Aug 20 10:22:44.515: %CAPWAP-5-SENDJOIN: sending Join Request to XX
*Aug 20 10:22:44.519: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Aug 20 10:22:44.519: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Aug 20 10:22:44.519: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Aug 20 10:22:44.519: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from XX
*Aug 20 10:22:49.515: %CAPWAP-5-SENDJOIN: sending Join Request to XX
*Aug 20 10:23:43.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to XX:5246
*Aug 20 10:23:44.031: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Aug 20 10:23:44.083: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Aug 20 10:23:44.119: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Aug 20 10:23:45.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Aug 20 10:23:45.139: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Aug 20 10:23:46.139: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
IP of the controller is correct through DHCP.
We don't have any mesh access points in our network and I don't think that would be possible because we have more than one country code registred.
No information in the controller log, so I don't know what to do now.
Does anyone has an idea?
Regards,
Sven

Hello Sandeep.
I already added the MAC address to the filter.
I did everything that was in the configuration guide.
Here is the further information:
sh version
Cisco IOS Software, C1530 Software (ap1g3-K9W8-M), Version 15.2(4)JB3b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 23-Jan-14 21:52 by prod_rel_team
ROM: Bootstrap program is C1530 boot loader
BOOTLDR: C1530 Boot Loader (ap1g3-BOOT-M) Version 15.2(4)JB3b, RELEASE SOFTWARE (fc1)
AP78da.6e60.8a72 uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:/ap1g3-k9w8-mx.152-4.JB3b/ap1g3-k9w8-mx.152-4.JB3b"
Last reload reason: Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP1532I-E-K9 (MIPS74k) processor (revision 28) with 204800K/57344K bytes of memory.
Processor board ID FCZ1825H059
MIPS74k CPU at 700Mhz, revision number 0x0000
Last reset from power-on
LWAPP image version 7.6.95.12
2 Gigabit Ethernet interfaces
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 78:DA:6E:60:8A:72
Part Number                          : 74-11942-01
PCA Assembly Number                  : 000-00000-00
PCA Revision Number                  : 
PCB Serial Number                    : FOC182280HQ
Top Assembly Part Number             : 000-00000-00
Top Assembly Serial Number           : FCZ1825H059
Top Revision Number                  : 23
Product/Model Number                 : AIR-CAP1532I-E-K9   
Configuration register is 0xF
sh sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.120.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 7.0.112.21
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS
System Name...................................... XX
System Location.................................. 
System Contact................................... 
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. SSO (Both AP and Client SSO)
IP Address....................................... XX
Last Reset....................................... Software reset
System Up Time................................... 10 days 1 hrs 7 mins 54 secs
System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin, Rome, Vienna
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... Multiple Countries:AT,BG,BR,CH,CN,CZ,DE,DK,FI,FR,GB,HK,IT,JP,KR,NL,NO,PL,SE,SK
--More-- or (q)uit
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +27 C
External Temperature............................. +22 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 15
Number of Active Clients......................... 563
Burned-in MAC Address............................ 2C:54:2D:72:60:C0
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 500
Regards,
Sven

Similar Messages

  • After making a note in a non wifi environment the note disappears when connecting the Macbook Air to the internet?

    After making a note in a non wifi environment the note dissappears completely after connecting the Macbook Air to the internet again?

    What kind of server are you using to sync Notes, if not iCloud?

  • BI-IP with non SAP environment

    Hi,
    How is BI-IP suitable for Planning , Budgeting and Forecasting with non-SAP environment?
    Regards,
    UR

    Hi UR,
    BI-IP works on top of BI (datawarehouse). If you mean load data from non sap into BI and then plan with IP, it can be a good solution, if you mean plan data outside BI it is not possible.
    br
    Michele

  • Instnce name in non-RAC environment

    Hi!
    In non-RAC environment V$INSTANCE.INSTANCE_NAME does not actually displays the name of the instance,that was set in INSTANCE_NAME parameter.
    It always displays DB_NAME instead.
    Is it any way to get instance_name that has service user connected to in this environment?
    LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 28-JAN-2010 09:16:25
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=vegas)(PORT=1524)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
    Start Date 28-JAN-2010 09:15:36
    Uptime 0 days 0 hr. 0 min. 48 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File D:\oracle\db\product\10.2.0\network\admin\listener.ora
    Listener Log File D:\oracle\db\product\10.2.0\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vegas)(PORT=1524)))
    Services Summary...
    Service "EMCOR" has 1 instance(s).
    Instance "INST0", status READY, has 1 handler(s) for this service...
    Service "EMCOR_XPT" has 1 instance(s).
    Instance "INST0", status READY, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "RESXDB" has 1 instance(s).
    Instance "INST0", status READY, has 1 handler(s) for this service...
    Service "SRV1" has 1 instance(s).
    Instance "INST0", status READY, has 1 handler(s) for this service...
    Service "SRV2" has 1 instance(s).
    Instance "INST0", status READY, has 1 handler(s) for this service...
    The command completed successfully
    And SQLPLUS said
    C:\Documents and Settings\oradba>sqlplus
    SQL*Plus: Release 10.2.0.4.0 - Production on Thu Jan 28 09:44:59 2010
    Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
    Enter user-name: emcos@emcor_srv2
    Enter password:
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    09:45:04 EMCOS@emcor_srv2 >select name from v$database;
    NAME
    EMCOR
    Elapsed: 00:00:00.00
    09:45:07 EMCOS@emcor_srv2 >select instance_name from v$instance;
    INSTANCE_NAME
    emcor
    Elapsed: 00:00:00.01
    09:45:21 EMCOS@emcor_srv2 >select service_name from v$session where sid=(select unique sid from v$mystat);
    SERVICE_NAME
    SRV2

    Hemant K Chitale wrote:
    The documentation on INSTANCE_NAME in the 10gR2 Reference says :
    "In a single-instance database system, the instance name is usually the same as the database name."
    (this after
    "In a Real Application Clusters environment, multiple instances can be associated with a single database service. Clients can override Oracle's connection load balancing by specifying a particular instance by which to connect to the database. INSTANCE_NAME specifies the unique name of this instance.")
    This would imply that setting INSTANCE_NAME in non-RAC is ignored. The usage of the word "usually" is weak.
    Hemant K ChitaleBut what do says lsnrctl - it says that it is not weak
    11:33:28 SYS@EMCOR_SRV1 >show parameter instance_name
    NAME TYPE VALUE
    instance_name                        string      INST0
    11:33:36 SYS@EMCOR_SRV1 >host lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 28-JAN-2010 11:33:50
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=vegas)(PORT=1524)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
    Start Date 28-JAN-2010 09:15:36
    Uptime 0 days 2 hr. 18 min. 14 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File D:\oracle\db\product\10.2.0\network\admin\listener.ora
    Listener Log File D:\oracle\db\product\10.2.0\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vegas)(PORT=1524)))
    Services Summary...
    Service "EMCOR" has 1 instance(s).
    Instance "INST0", status READY, has 1 handler(s) for this service...
    Service "EMCOR_XPT" has 1 instance(s).
    Instance "INST0", status READY, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "RESXDB" has 1 instance(s).
    Instance "INST0", status READY, has 1 handler(s) for this service...
    Service "SRV1" has 1 instance(s).
    Instance "INST0", status READY, has 1 handler(s) for this service...
    Service "SRV2" has 1 instance(s).
    Instance "INST0", status READY, has 1 handler(s) for this service...
    The command completed successfully
    11:33:50 SYS@EMCOR_SRV1 >select sys_context('USERENV','INSTANCE_NAME') from dual;
    SYS_CONTEXT('USERENV','INSTANCE_NAME')
    emcor
    Elapsed: 00:00:00.00
    11:34:42 SYS@EMCOR_SRV1 >select service_name from v$session where sid=sys_context('USERENV','SID');
    SERVICE_NAME
    SRV1
    Best regards, Sergey

  • IS IT SUPPORTED TO CENTRALLY MOUNT THE ORACLE_HOME IN A NON-RAC ENVIRONMENT

    SR 7250090.993 : (http://qmon.oraclecorp.com/qmon3/quickpicks.pl?t=t&q=7250090.993)
    Technical Summary:
    Customer is planing to install Oracle 10.2.0.4 and 11.1.0.x software on a Red Hat5 with NetApp storage.
    Customer came across the following :
    For single instance installations (as opposed to RAC installations), you must create a separate Oracle home directory for each installation. Run the software in this Oracle home directory only from the system that you used to install it. For Oracle Real Application Clusters (RAC) installations, you can use a single Oracle home directory mounted from each node in the cluster. You must mount this Oracle home directory on each node so that it has the same directory path on all nodes.
    mentioned in the 10gR2 documentation link :
    http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/app_nas.htm#BCFIDEJA
    Requirements/Expectations:
    As the above statements, that customer came across is not present in 9i documentation, customer wants to understand if it is actually supported to centrally mount the 10g/11g ORACLE_HOME to many servers that are not RAC enabled.
    Also, I would like to understand if the statements in documentation indicate that it is not generally recommended centrally mount the 10g/11g ORACLE_HOME or does it mean that it is not supported to centrally mount the ORACLE_HOME in a non RAC environment?
    Please advice.

    The binaries (executables) in an Oracle home are "linked" (link edited?) to the OS libraries on each server where the software is installed.
    Unless the OS is IDENTICAL on each of the IDENTICAL(HW) servers -- that would share the Oracle home--, you could be in trouble.
    The only supported configuration (I know of) where the Oracle binaries are shared between servers is 9i RAC. On 10g RAC the binaries are installed on each server.
    Other wise I'd say it's NOT recommended, besides you don't save anything (execpt a cooupl of Gigs disk space).
    :p

  • OCFS2 in a non-RAC environment

    Here's a question I've been batting around with a sysadmin. I thought I'd run it past this group.
    We're spec'ing out the hardware for a very large Oracle database (3+ TB) running on Linux. This will be a single, non-RAC instance. This particular SA has very bad feelings about the ext3 filesystem (I am not exactly sure what his objections are). He has heard about ocfs2 and wonders if it would be superior to ext3.
    What do you think? Would ocfs2 be appropriate in a non-clustered environment? Can you suggest any arguments for or against this approach?
    Thanks, I appreciate any thoughts anyone might have.

    Note that paper was written in 2004, and their tests used Pentium III processors. The OS was RHAS 2.1 and their kernel was 2.4.9
    I'm not saying that invalidates the paper's conclusions, but I'm certainly saying you'd have to be very careful indeed in assuming that conclusions drawn from that combination of hardware and software had anything much to say about today's quad cores, multi-gigabyte RAM, kernel 2.6.x setups.
    I'm concerned when I see their graphs on page 8: no axis scales in either x or y directions. If they're going to come to the conclusion that ext2/3 performance tails off, it would be nice to know whether it does so when the number of users hits 10, 50, 100, 500 or whatever, wouldn't it? But you can't tell anything from their graphs on that score.
    And I don't see any mention of them adjusting the buffer cache when using raw, which (having just abolished the file system cache) is something you should sensibly do when making such comparisons.
    And, of course, they were testing OCFS not OCFS2, so again... the applicability of anything concluded in that paper to today's situation is highly questionable, at least in my mind. But I do note that OCFS with "high numbers" of users ended up clobbering the CPU to death, whereas ext2/3 didn't...
    And they seem to claim that transactions per second levelled out with ext2/3 because they hit a lot of free buffer waits -and there are ways of dealing with them that don't involve getting rid of the file system! The fact that they didn't report a lot of write complete waits as well as free buffer waits might indicate that they just need more DBWRs, and not a switch of file system, for example.
    Anyway... short answer is, I wouldn't read too much into that report, which looks to me to be poorly devised and written and very much 'of its time and place' with little general applicability outside of that.

  • ASM in a non-RAC environment

    Gurus,
    what are the advantages, if any, of running ASM in a non-RAC environment?
    Thanks.

    Any raid (that actually provides multiple disks in a
    LVM) will nullify the performance gains of raw that
    are associated with disk head contention.
    Any disk subsystem with front-end RAM cache will
    nullify the rest of the performance gains of raw
    disk.
    Any 'RAID-5 is good' argument under a database
    assumes large and efficient cache.Unfortunately, we can't just discount RAID-5, since it is far too cost-efficient an option these days, with 10, 20, 30+ TB databases. Plus, the storage vendors actually make it efficient enough that it performs almost as well as RAID 1+0.
    Multiple disks on the storage subsystem and RAM caches (for reads and writes) are still important and valuable performance enhancements. Remember that your storage subsystem is much more efficient at this than your database or server (since it's designed to do it!). True, it doesn't have knowledge of the database files, their content, and their usage, but you do, and can therefore intelligently configure the subsystem and place the data files.
    ASM does nothing more intelligent than stripe the data across all of the available disks. The best part about it is the ability to dynamically grow the groups. The problem with it is that it thwarts the read-ahead cache of the storage subsystem. And, while Oracle will intelligently 'read-ahead', it can't optimize where the heads are on the disk, or take into consideration the 10 other servers accessing the same storage subsystem.
    The problem with ASM doing the striping is that, for large databases, you will typically have hundreds of disks underneath the covers. If you gave the OS and then Oracle that many devices, what do you think would happen? It would step all over itself and seriously impair your ability to access the devices in parallel. Whereas, if you group 4 or 8 devices together, the storage subsystem will access them together in parallel for the OS.
    So, don't discount your storage box... But yeah, use RAID 1+0 rather than RAID-5 (4,3) when possible!

  • Cssd does not start in non-RAC environment Thus we can not bring up ASM

    Non-RAC environment
    ASM version = 11.1.0.7
    HP-UX Itanium 11.23
    After power outage, CSSD does not start on non-RAC environment
    Running as root "/sbin/init.d/init.cssd start" does not start cssd
    Oracle support tried "$ASM_HOME/bin/localconfig delete" and "$ASM_HOME/bin/localconfig add"
    but it did not start CSS
    Oracle support tried "$ASM_HOME/bin/localconfig reset $ASM_HOME"
    It started the CSSD and the "crsctl check css" came back with CSS is healthy
    But around 1 minute later it rebooted the server and when it came up again CSS does not start.
    They checked /etc/inittab and it looked fine.
    Before the reboot we saw this message in the /var/adm/syslog/OLDsyslog.log:
    Cluster Ready Services completed waiting on dependencies
    Again it is a NON-RAC environment. We only need CSSD for ASM. We do not have CRS installed on this server.
    Our test system has been down for a week and we did not get the resolution from Oracle support yet !
    Any pointers are greately appriciated.
    Thanks,
    Dzung

    Here is the message in $ASM_HOME/log/<hostname>/alert<hostname>.log :
    2010-07-16 09:42:02.956
    [client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
    ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
    2010-07-16 09:42:02.971
    [client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
    ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
    2010-07-16 09:42:03.054
    [client(11930)]CRS-1013:The OCR at /db/app/oracle/product/11.1/cdata/localhost/local.ocr was successfull
    y formatted using version 2. Ignore earlier CRS-1006 messages if any.
    2010-07-16 09:42:46.379
    [cssd(12297)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rmodbd01 .
    Here is the message in $ASM_HOME/log/<hostname>/cssd/cssdOUT.log:
    setsid: failed with -1/1
    s0clssscGetEnvOracleUser: calling getpwnam_r for user oracle
    s0clssscGetEnvOracleUser: info for user oracle complete
    07/16/10 09:42:36: CSSD starting
    Here is the message in $ASM_HOME/log/<hostname>/cssd/ocssd.log:
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 7, from 6, changes 6
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmSetVersions: properties common to all peers: 1,2,3,4,5,6,7
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmEstablishMasterNode: MASTER for 174732166 is node(0) birth(174732166)
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 8, from 7, changes 7
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 9, from 8, changes 8
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 10, from 9, changes 9
    [    CSSD]CLSS-3000: reconfiguration successful, incarnation 174732166 with 1 nodes
    [    CSSD]CLSS-3001: local node number 0, master node number 0
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssscSAGEInitFenceCompl: Completing kgzf fence initialization
    [    CSSD]2010-07-16 09:42:46.394 [12] >TRACE: clssgmUpdateEventValue: Client listener incarn val 174732166, changes 1
    [    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c7120) allocated
    [    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c73a0) allocated
    [    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user oracle
    [    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user root
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7120 - 1,2,3
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2810) proc(60000000003c7120) pid(12350) version 11:1:1:4
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c73a0 - 1,2,3
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c73a0) pid(12131) version 11:1:1:4
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(1/600000000096e7c0)
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e7c0)
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmJoinGrock: local grock CSS_INTERNAL_NODE_GROUP new client 600000000096e7c0 with con 60000000003b2b10, requested num 0
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmAddNodeGrpMember: member (60000000009e0030) added
    [    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
    [    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
    [    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDeadProc: proc 60000000003c73a0
    [    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c73a0) con(60000000003b2990) skgpid ospid 12131 with 0 clients, refcount 0
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of unknown group MASTER#DISKMON#GROUP
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of group MASTER#DISKMON#GROUP, member count 0
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: KGZF: context successfully initialized, API version 1.4, using pipe default
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssscSAGEInitFenceCompl: kgzf fence initialization successfully completed
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: CSS/GM open for global group registrations
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: completed for reconfig(174732166), with status(1)
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmUpdateEventValue: Reconfig Event val 2, changes 2
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmWaitOnEventValue: after Reconfig Event val 2, eval 2 waited 47
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(2/600000000096e870)
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmUpdateEventValue: Reconfig Event val 0, changes 3
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmStartNMMon: previous reconfig complete, incarnation(174732166)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP#MX new client 600000000096e870 with con 60000000003b2990, requested num -1
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP#MX
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/MASTER#DISKMON#GROUP#MX)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmQueueGrockEvent: lockName(MASTER#DISKMON#GROUP#MX) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmCommonAddMember: global lock grock MASTER#DISKMON#GROUP#MX member(0/Local) node(0) flags 0x2 0x2
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(3/600000000096e920)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 3 (600000000096e920)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP new client 600000000096e920 with con 60000000003b2bd0, requested num 0
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: new master 0 for group(MASTER#DISKMON#GROUP)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group MASTER#DISKMON#GROUP, death 1, SAGE 0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: member (0/60000000009e0230) added. pbsz(72) prsz(0) flags 0x0 to grock (600000000098a170/MASTER#DISKMON#GROUP)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmQueueGrockEvent: groupName(MASTER#DISKMON#GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x78, state 0x0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmCommonAddMember: global group grock MASTER#DISKMON#GROUP member(0/Local) node(0) flags 0x0 0x1e00
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock MASTER#DISKMON#GROUP#MX, member 0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock MASTER#DISKMON#GROUP#MX
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmRemoveMember: grock MASTER#DISKMON#GROUP#MX, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
    [    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:58.354 [12] >TRACE: clssgmAllocProc: (60000000003c7ee0) allocated
    [    CSSD]2010-07-16 09:43:58.355 [14] >TRACE: Connect request from user oracle
    [    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7ee0 - 1,2,3
    [    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c7ee0) pid(13157) version 11:1:1:4
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(1/600000000096e870)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_GROUP new client 600000000096e870 with con 60000000003b2c90, requested num -1
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_GROUP
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: new master 0 for group(CLSSSCHECK_GROUP)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group CLSSSCHECK_GROUP, death 1, SAGE 0
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: member (0/60000000009e0130) added. pbsz(8) prsz(8) flags 0x0 to grock (6000000000989e50/CLSSSCHECK_GROUP)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmQueueGrockEvent: groupName(CLSSSCHECK_GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x0, state 0x0
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmCommonAddMember: global group grock CLSSSCHECK_GROUP member(0/Local) node(0) flags 0x0 0x0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 1 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 1 (600000000096e870), grock CLSSSCHECK_GROUP, member 0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_GROUP
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_GROUP, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 2
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(2/600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_LOCK new client 600000000096e870 with con 60000000003b2c90, requested num -1
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_LOCK
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/CLSSSCHECK_LOCK)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmQueueGrockEvent: lockName(CLSSSCHECK_LOCK) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmCommonAddMember: global lock grock CLSSSCHECK_LOCK member(0/Local) node(0) flags 0x2 0x2
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock CLSSSCHECK_LOCK, member 0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_LOCK
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_LOCK, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
    [    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDeadProc: proc 60000000003c7ee0
    [    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c7ee0) con(60000000003b2990) skgpid ospid 13157 with 0 clients, refcount 0
    [    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/client.log:
    [ DISKMON] 07/16/2010 18:33:32.050 dskm_send_command: process 23246 sending command 8 to master diskmon listening on default pipe
    [ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: skgznp_connect failed with error 56815
    [ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: error 56815 at location skgznpcon6 - connect() - Connection refused
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmonOUT.log:
    setsid: failed with -1/1
    dskm_getenv_oracle_user: calling getpwnam_r for user oracle
    dskm_getenv_oracle_user: info for user oracle complete
    07/16/10 18:33:31: Master Diskmon starting
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmon.log:
    [ DISKMON] 07/16/2010 09:42:35.573 dskm main: starting up
    [ DISKMON] 07/16/2010 09:42:35.588 [12350:3] dskm_rac_thrd_main: running
    [ DISKMON] 07/16/2010 09:42:35.588 [12350:1] dskm_rac_thrd_creat2: got the post from the css event handling thread
    [ DISKMON] 07/16/2010 09:42:35.589 [12350:1] dskm main: startup complete
    [ DISKMON] 07/16/2010 09:42:35.589 [12350:1] listening on -> default pipe
    [ DISKMON] 07/16/2010 09:42:35.792 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:36.385 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:36.906 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:37.426 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:37.945 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:38.465 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:1] dskm_slave_thrd_creat: thread created
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_slave_thrd_main1: slave 0 running
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_process_msg5: received msg type KGZM_IDENTIFY (0x0001)
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_identify8: client kgzf/12297, version 0x01020000, slave 0, reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=0,gin=0,gmn=0,umemid=0,opid=0,opsn=0,lvl=node
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version1:
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version4: done
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_IDENTIFY (0x0001), retcode 0
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg5: received msg type KGZM_KGZF_HANDSHAKE (0x0010)
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_kgzf_handshake3: client kgzf/12297, kgzf version 0x00010004, slave 0
    [ DISKMON] 07/16/2010 09:42:46.401 [12350:3] dskm_clss_ini2: successful clsssinit(), clssvers 2.1
    [ DISKMON] 07/16/2010 09:42:46.402 [12350:3] dskm_clss_ini12: node rmodbd01 (0) registered in cluster
    [ DISKMON] 07/16/2010 09:42:46.403 [12350:3] dskm_reid_ini12: diskmon reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=-1,gin=-1,gmn=-1,umemid=-1,opid=12350,opsn=1279291355,lvl=process
    [ DISKMON] 07/16/2010 09:42:46.424 [12350:3] dskm_sage_config: CELL storage configuration file cellinit.ora not found
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:3] dskm_nfy_kgzf1: notified thread kgzf enabled
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake5: got the post from the hb thread
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake9: done, kgzf enabled
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_KGZF_HANDSHAKE (0x0010), retcode 0
    [ DISKMON] 07/16/2010 09:42:46.426 [12350:3] dskm_rac_ini22: CELL storage not configured in the cluster; registered in group MASTER#DISKMON#GROUP as memno 0 (GSDGRPSZ 512)

  • Text Mining with Trex 6.1 in non-portal environment

    Hello,
    I am using a 46C system with Kpro connected to a Trex 6.10 for indexing DMS-documents. The fulltext search works fine, however I cannot get the text-mining functions to work.
    In the Trex 6.10 administration looking at the index parameters i see the text-mining-flag is NOT set.
    How can I set the text-mining flag of an index?
    Since i have only a 46c system I create the index-category in transaction SKPR07 - but i cannot enable text-mining there (?).
    To wrap it up: I want to get not only fulltext-search results but also document features and (maybe) similar documents from trex. How can i achieve this in a non-portal environment?
    Any help from you experts would be highly appreciated!
    best regards,
    Johannes
    ps: i posted this here in the EP forum because this seems to be where the trex knowledge is.

    Hi Karsten
    Problem was that when i create the index from SKPR07 it is always without text-mining flag. But a small modification solved the problem, and now I can use textmining also in the 46C system.
    here is how-to:
    added 2 new import parameters in the function (on 46c)
    FUNCTION SRET_INDEX_STORAGE_CREATE.
    ""Lokale Schnittstelle:
    *"  IMPORTING
    *"     VALUE(SEARCHENG) LIKE  SRETGSTRUC-XSENG
    *"     VALUE(CODEPAGE) LIKE  SRETRCP-CODEPAGE
    *"     VALUE(XUSECLASS) LIKE  SRETGSTRUC-XUSECLASS OPTIONAL
    -->added     VALUE(FILTER_FLAG) LIKE  SRETGSTRUC-X2FLAG OPTIONAL
    -->added     VALUE(TEXTMINING_FLAG) LIKE  SRETGSTRUC-X2FLAG OPTIONAL
    *"  EXPORTING
    *"     VALUE(RCODE) LIKE  SRETGSTRUC-RCODE
    *"  TABLES
    *"      IDXSTORAGETAB STRUCTURE  SRETIDSTID
    *"      TECHNICALATTR STRUCTURE  SRETXTECAT
    *"      DOCATTRTAB STRUCTURE  SRETDOCATR
    *"  EXCEPTIONS
    *"      CREATION_NOT_POS
    set textmining flag to '1' and so now a newly created index has the textmining flag on the trex.
    now i can use function (on any webas>6.10)
    SRET_C_GET_DOCUMENT_FEATURES to get the document keywords. Great! Now I can (finally) implement the "google-like" document search in the old 46c system.
    thank you for your help! your fast replies are very much appreciated!
    Johannes

  • Roaming between mesh and non mesh and mesh AP design

    Hi There,
    I need some verification on the following:
    - Can client roam between Mesh AP 1550 series and Non-Mesh AP?
    - I have 1550 series AP to be installed and all the mounting area are with data point ready, which connects back to switch. Would configuring mesh for this outdoor units recommended, and guide on this. Current guide i am looking from cisco site is basically the AP do not have wired ethernet connection, my design here a bit different, all the AP's have wired connection back to the switch.
    Kindly assist.
    Thank you
    Rama

    I have seen and done installs like this. The advantage is that you don't have to worry about the backhaul dropping. So it's like any LAP but big chunky outdoor AP. If the RAP looses Ethernet connectivity... Well it changes to a MAP. So you can look at
    It as a benefit. It's always nice to be able to have Ethernet when you can.
    Sent from Cisco Technical Support iPhone App

  • MARS topology in non-Cisco environment

    In a heterogeneous, non-Cisco environment (e.g. Dell switches, Sidewinder firewall), is it possible to obtain accurate topology/visualization information? If so, how is this accomplished? Any other best-practices/gotchas for getting the most out of MARS in such environment would be helpful as well. Thank you.

    We don't really have any topology information in MARS, and for the most part don't pay much attention to the topology or attack graphs/charts. Don't even use the summary page. We don't use the MARS for anything but collecting events. Maybe I don't know what I'm missing, but we get along just fine without(we even have a mostly Cisco network).

  • NAC in non dhcp environment

    how can implement nac in non dhcp environment (all users have static ip) ?
    i need to use virtual GW mode?
    all the useres must be in the same access vlan ?

    For role-based vlan mapping, the vlan is switched to the final vlan and then agent requests an ip refresh since if you had the access vlan IP address, and you're now in a new vlan, network access wont be there.
    I don't think we have any white papers discussing setting up NAC with static IPs, but I'll look.
    HTH,
    Faisal

  • How to read a non-oracle environment variable?

    I have been trying to read a non-oracle environment variable using TOOL_ENV.GETVAR, and have come to understand that it doesn't work. Is there another function that can do what I want? I don't want to hardcode the directory the forms and reports must reside in, but can't find anyway to make this value flexible.
    can anyone help ?
    thx
    adam

    I figured out a way. I put a String in the registry in the oracle home area, and can read it with TOOL_ENV.GETVAR now. It appears that it reads from the registry, not the environment variables. Except for unix apparently, where it reads environment variables.
    adam

  • WLC code: Mesh-Only vs Non-Mesh

    Most of the sites have 1131Indoor and one site has 1522 Outdoor AP. All the AP's will have POE cable. We dont need Mesh technology.
    We are trying to evaluate between Mesh Only or Non-Mesh code for WLC. Some of the departments are low budget funded so they cannot afford to have two different WLC's.
    What is the loss of functionality if we make Indoor AP like 1131 connect to Mesh Only code?
    Is there a link that shows the functionality comparison between Mesh Only and Non-Mesh WLC code?

    the mesh code right now is still based on 4.1 code.... so you will only have features as of 4.1 (there is no mesh code based on 4.2 yet)....
    if you use mesh release 2, the .24 code... its the first mesh code to support internal ap's like the 1131 in indoor mesh and normal local mode (possibly hreap as well but I dont have a doc in front of me right now)......
    but if you want to support the 1522 and 1131 on the same WLC you will have to use mesh release 2 the.24 one...

  • Syndicating with a non unicode environment

    When MDM is used as the central data manager what are the known issues when the data is syndicated to a non Unicode environment?

    When MDM is used as the central data manager what are the known issues when the data is syndicated to a non Unicode environment?

Maybe you are looking for