AIR, fullscreen, cpu power and a touchscreen pc: Help!
hello all
i need help on AIR in fullscreen mode, cpu power and cores.
i am a ("2 years old") self taught AS3 programmer, and i have written a specific gaming application which is intended to run on a touchscreen pc in full screen mode, as a gaming kiosk.
i am coding and debugging on my old G5 dual 2.3 PowerPC mac (screen resolution:11572x870) and i have found that some rendering operations are hard for my computer to do (frame rate drops significantly), even after doing much optimization tricks (like the excellent ones provided by Sean Christmann - http://tv.adobe.com/watch/max-2008-develop/optimizing-adobe-air-for-code-execution-memory- rendering/)
when i scale the app window down performance improves a lot (but i need it fullscreen)
as i have never learned computer programming (i am a sound designer "by day"), the terms "no graphics hardware acceleration" and "single threaded" came a bit too late for me... so although I'm not so sure flash/air/as3 was the best way to go to achieve my idea, i currently don't want to switch to another platform/languge.
i am about to purchase a touchscreen pc for this purpose. i am considering an HP touchsmart or a Sony VAIO-L for that.
my first question is: do multiple cores affect AIR performance ?
hp's best model has an Intel(R) Core(TM) 2 Duo processor T9800 [2.93GHz, 6MB L2, 1066 FSB]
and sony's best model has a 2.66GHz (Q8400S) Intel® Core® 2 Quad Processor
my second question is: is there any "wrapper" out there that will wrap my AIR app and help it by using the graphics card for accelaration?
thanx in advance,
Saar
i'm not seeing this, i ran a few demos in both gtk-demo and gtk3-demo, flipped thru a bunch of menus real fast, and the cpu usage for both was nearly indentical. those affected should probably post more info about their setup such as what graphic driver they're using and if they're on 32 or 64 bit arch, etc.
my relevant setup info:
fully updated arch-x86_64
openbox
xf86-video-nouveau 0.0.16_git20120324-1 (compiled myself from that date in order to be able to use the new SwapLimit option for reliable double buffering with vsync)
Similar Messages
-
Kernel_task problem on MBP 8,2 eating up huge CPU power, and messed up Ethernet.
Hello.
After using resource-intensive apps like VMware, I find that kernel_task is gobbling up lots of CPU power, causing my fans to keep spinning at high speeds even after VMware has been shut down for over half an hour.
The same thing happens after using BlueStacks.
PS some places are telling me that it could be a faulty temperature sensor, but I can't confirm this as Apple Hardware Test just wouldn't load up on my MBP.
I have provided two images showing Activity Monitor and iStat.
EDIT: This problem has also prevented me from connecting to the web via Ethernet. Attempts to disconnect from Ethernet has also failed. The Ethernet status in the menu bar keeps saying 'disconnecting…' for several minutes, but to no avail.
Note: This is on an early-2011 15" MBP, 2.3GHz i7, 8GB RAM.
Is there any way to solve this problem?
Thanks in advance.Okay, here's the log. The kernel_task started hogging CPU power the moment I connected to my PPPoE service via Ethernet:
02/09/2012 15:59:07.000
bootlog[0]
BOOT_TIME 1346572747 0
02/09/2012 15:59:18.000
kernel[0]
PMAP: PCID enabled
02/09/2012 15:59:18.000
kernel[0]
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
02/09/2012 15:59:18.000
kernel[0]
vm_page_bootstrap: 2004996 free pages and 75772 wired pages
02/09/2012 15:59:18.000
kernel[0]
kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
02/09/2012 15:59:18.000
kernel[0]
zone leak detection enabled
02/09/2012 15:59:18.000
kernel[0]
standard timeslicing quantum is 10000 us
02/09/2012 15:59:18.000
kernel[0]
standard background quantum is 2500 us
02/09/2012 15:59:18.000
kernel[0]
mig_table_max_displ = 74
02/09/2012 15:59:18.000
kernel[0]
TSC Deadline Timer supported and enabled
02/09/2012 15:59:18.000
kernel[0]
corecrypto kext started!
02/09/2012 15:59:18.000
kernel[0]
Running kernel space in FIPS MODE
02/09/2012 15:59:18.000
kernel[0]
Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
02/09/2012 15:59:18.000
kernel[0]
Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS integrity POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS AES CBC POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS TDES CBC POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS AES ECB AESNI POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS AES XTS AESNI POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS SHA POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS HMAC POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS ECDSA POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS DRBG POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS POST passed!
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
02/09/2012 15:59:18.000
kernel[0]
calling mpo_policy_init for TMSafetyNet
02/09/2012 15:59:18.000
kernel[0]
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
02/09/2012 15:59:18.000
kernel[0]
calling mpo_policy_init for Sandbox
02/09/2012 15:59:18.000
kernel[0]
Security policy loaded: Seatbelt sandbox policy (Sandbox)
02/09/2012 15:59:18.000
kernel[0]
calling mpo_policy_init for Quarantine
02/09/2012 15:59:18.000
kernel[0]
Security policy loaded: Quarantine policy (Quarantine)
02/09/2012 15:59:18.000
kernel[0]
Copyright (c) 1982, 1986, 1989, 1991, 1993
02/09/2012 15:59:18.000
kernel[0]
The Regents of the University of California. All rights reserved.
02/09/2012 15:59:18.000
kernel[0]
MAC Framework successfully initialized
02/09/2012 15:59:18.000
kernel[0]
using 16384 buffer headers and 10240 cluster IO buffer headers
02/09/2012 15:59:18.000
kernel[0]
IOAPIC: Version 0x20 Vectors 64:87
02/09/2012 15:59:18.000
kernel[0]
ACPI: System State [S0 S3 S4 S5] (S3)
02/09/2012 15:59:18.000
kernel[0]
PFM64 (36 cpu) 0xf10000000, 0xf0000000
02/09/2012 15:59:18.000
kernel[0]
[ PCI configuration begin ]
02/09/2012 15:59:18.000
kernel[0]
AppleIntelCPUPowerManagement: Turbo Ratios 88AB
02/09/2012 15:59:18.000
kernel[0]
AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
02/09/2012 15:59:18.000
kernel[0]
console relocated to 0xf60010000
02/09/2012 15:59:18.000
kernel[0]
PCI configuration changed (bridge=16 device=5 cardbus=0)
02/09/2012 15:59:18.000
kernel[0]
[ PCI configuration end, bridges 12 devices 18 ]
02/09/2012 15:59:18.000
kernel[0]
FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe81c7a8; max speed s800.
02/09/2012 15:59:18.000
kernel[0]
mbinit: done [96 MB total pool size, (64/32) split]
02/09/2012 15:59:18.000
kernel[0]
Pthread support ABORTS when sync kernel primitives misused
02/09/2012 15:59:18.000
kernel[0]
rooting via boot-uuid from /chosen: 26EE8AAD-DFBC-399D-8F6E-B825F8A84EEC
02/09/2012 15:59:18.000
kernel[0]
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
02/09/2012 15:59:18.000
kernel[0]
com.apple.AppleFSCompressionTypeZlib kmod start
02/09/2012 15:59:18.000
kernel[0]
com.apple.AppleFSCompressionTypeDataless kmod start
02/09/2012 15:59:18.000
kernel[0]
Error 2 registering socket filter (com.symantec.fw.ac.at). Your computer may not be fully protected.
02/09/2012 15:59:18.000
kernel[0]
com.apple.AppleFSCompressionTypeZlib load succeeded
02/09/2012 15:59:18.000
kernel[0]
com.apple.AppleFSCompressionTypeDataless load succeeded
02/09/2012 15:59:18.000
kernel[0]
AppleIntelCPUPowerManagementClient: ready
02/09/2012 15:59:18.000
kernel[0]
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HTS725050A9A362 Media/IOGUIDPartitionScheme/Customer@2
02/09/2012 15:59:18.000
kernel[0]
BSD root: disk0s2, major 1, minor 1
02/09/2012 15:59:18.000
kernel[0]
BTCOEXIST off
02/09/2012 15:59:18.000
kernel[0]
BRCM tunables:
02/09/2012 15:59:18.000
kernel[0]
pullmode[1] txringsize[ 256] reapmin[ 32] reapcount[ 128]
02/09/2012 15:59:18.000
kernel[0]
highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
02/09/2012 15:59:18.000
kernel[0]
Kernel is LP64
02/09/2012 15:59:18.000
kernel[0]
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
02/09/2012 15:59:08.672
com.apple.launchd[1]
*** launchd[1] has started up. ***
02/09/2012 15:59:08.672
com.apple.launchd[1]
*** Shutdown logging is enabled. ***
02/09/2012 15:59:18.062
com.apple.launchd[1]
(com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
02/09/2012 15:59:32.855
hidd[47]
Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
02/09/2012 15:59:33.000
kernel[0]
macx_swapon SUCCESS
02/09/2012 15:59:34.000
kernel[0]
BCM5701Enet: Ethernet address c8:2a:14:26:41:68
02/09/2012 15:59:34.000
kernel[0]
AirPort_Brcm4331: Ethernet address e4:ce:8f:02:e2:6e
02/09/2012 15:59:34.000
kernel[0]
IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
02/09/2012 15:59:34.000
kernel[0]
IO80211Interface::efiNVRAMPublished():
02/09/2012 15:59:34.165
Extractor[64]
Starting Extractor Daemon Mode.
02/09/2012 15:59:35.814
kdc[45]
label: default
02/09/2012 15:59:35.815
kdc[45]
dbname: od:/Local/Default
02/09/2012 15:59:35.815
kdc[45]
mkey_file: /var/db/krb5kdc/m-key
02/09/2012 15:59:35.815
kdc[45]
acl_file: /var/db/krb5kdc/kadmind.acl
02/09/2012 15:59:36.000
kernel[0]
Waiting for DSMOS...
02/09/2012 15:59:36.210
Symantec Error Reporting[63]
Symantec Error Reporting Daemon launched.
02/09/2012 15:59:36.819
hidd[47]
void __IOHIDLoadBundles(): Loaded 0 HID plugins
02/09/2012 15:59:36.821
mDNSResponder[39]
mDNSResponder mDNSResponder-379.27.1 (Aug 1 2012 20:12:04) starting OSXVers 12
02/09/2012 15:59:36.846
appleeventsd[53]
main: Starting up
02/09/2012 15:59:36.852
airportd[69]
_processDLILEvent: en1 attached (down)
02/09/2012 15:59:36.900
com.apple.usbmuxd[27]
usbmuxd-268.5 on Apr 5 2012 at 15:33:48, running 64 bit
02/09/2012 15:59:37.000
kernel[0]
createVirtIf(): ifRole = 1
02/09/2012 15:59:37.000
kernel[0]
in func createVirtualInterface ifRole = 1
02/09/2012 15:59:37.000
kernel[0]
AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8014146c00
02/09/2012 15:59:37.000
kernel[0]
AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
02/09/2012 15:59:37.000
kernel[0]
Created virtif 0xffffff8014146c00 p2p0
02/09/2012 15:59:37.665
coreservicesd[65]
FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
02/09/2012 15:59:37.000
kernel[0]
AGC: 3.2.6, HW version=1.9.23, flags:0, features:20600
02/09/2012 15:59:37.000
kernel[0]
Previous Shutdown Cause: 5
02/09/2012 15:59:37.000
kernel[0]
IOBluetoothUSBDFU::probe
02/09/2012 15:59:37.000
kernel[0]
IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
02/09/2012 15:59:37.000
kernel[0]
[BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
02/09/2012 15:59:37.000
kernel[0]
ACPI_SMC_PlatformPlugin::initFanThrottleControl - waiting for AppleSMC
02/09/2012 15:59:37.806
com.apple.kextd[12]
Can't load /System/Library/Extensions/iavkfs.kext - no code for running kernel's architecture.
02/09/2012 15:59:37.812
com.apple.kextd[12]
Load com.pctools.iantivirus.kfs failed; removing personalities from kernel.
02/09/2012 15:59:37.845
com.apple.kextd[12]
Can't load /System/Library/Extensions/iavkfs.kext - no code for running kernel's architecture.
02/09/2012 15:59:37.940
com.apple.kextd[12]
Load com.pctools.iantivirus.kfs failed; removing personalities from kernel.
02/09/2012 15:59:38.000
kernel[0]
[AGPM Controller] build GPUDict by Vendor1002Device6741
02/09/2012 15:59:38.000
kernel[0]
DSMOS has arrived
02/09/2012 15:59:38.000
kernel[0]
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
02/09/2012 15:59:38.000
kernel[0]
[IOBluetoothHCIController][start] -- completed
02/09/2012 15:59:38.000
kernel[0]
[IOBluetoothHCIController::setConfigState] calling registerService
02/09/2012 15:59:38.687
com.apple.SecurityServer[15]
Session 100000 created
02/09/2012 15:59:39.166
mds[38]
(Normal) FMW: FMW 0 0
02/09/2012 15:59:39.169
WindowServer[80]
Server is starting up
02/09/2012 15:59:39.172
WindowServer[80]
Session 256 retained (2 references)
02/09/2012 15:59:39.172
WindowServer[80]
Session 256 released (1 references)
02/09/2012 15:59:39.178
WindowServer[80]
Session 256 retained (2 references)
02/09/2012 15:59:39.559
WindowServer[80]
init_page_flip: page flip mode is on
02/09/2012 15:59:39.560
WindowServer[80]
init_resolution: resolution is enabled
02/09/2012 15:59:40.000
kernel[0]
AirPort: Link Down on en1. Reason 1 (Unspecified).
02/09/2012 15:59:40.000
kernel[0]
en1::IO80211Interface::postMessage bssid changed
02/09/2012 15:59:40.000
kernel[0]
AppleLMUController found an AG vendor product (0x9cb7), notifying SMC.
02/09/2012 15:59:40.341
configd[18]
network changed.
02/09/2012 15:59:40.342
configd[18]
setting hostname to "Yung-Ju-Chuas-MacBook-Pro.local"
02/09/2012 15:59:42.000
kernel[0]
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]
02/09/2012 15:59:42.228
WindowServer[80]
mux_initialize: Mode is dynamic
02/09/2012 15:59:42.240
WindowServer[80]
GLCompositor enabled for tile size [256 x 256]
02/09/2012 15:59:42.240
WindowServer[80]
CGXGLInitMipMap: mip map mode is on
02/09/2012 15:59:42.250
WindowServer[80]
WSMachineUsesNewStyleMirroring: false
02/09/2012 15:59:42.250
WindowServer[80]
Display 0x04272dc0: GL mask 0x9; bounds (0, 0)[1680 x 1050], 51 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cb7, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cb70000000004272dc0
02/09/2012 15:59:42.250
WindowServer[80]
Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
02/09/2012 15:59:42.250
WindowServer[80]
Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
02/09/2012 15:59:42.257
WindowServer[80]
Created shield window 0x5 for display 0x04272dc0
02/09/2012 15:59:42.257
WindowServer[80]
Created shield window 0x6 for display 0x003f003e
02/09/2012 15:59:42.257
WindowServer[80]
Created shield window 0x7 for display 0x003f003d
02/09/2012 15:59:42.261
WindowServer[80]
Display 0x04272dc0: GL mask 0x9; bounds (0, 0)[1680 x 1050], 51 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cb7, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cb70000000004272dc0
02/09/2012 15:59:42.262
WindowServer[80]
Display 0x003f003e: GL mask 0x4; bounds (2704, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
02/09/2012 15:59:42.262
WindowServer[80]
Display 0x003f003d: GL mask 0x2; bounds (2705, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
02/09/2012 15:59:42.262
WindowServer[80]
CGXPerformInitialDisplayConfiguration
02/09/2012 15:59:42.262
WindowServer[80]
Display 0x04272dc0: MappedDisplay Unit 0; Alias(0, 0x9); Vendor 0x610 Model 0x9cb7 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1680 x 1050], Rotation 0, Resolution 1
02/09/2012 15:59:42.262
WindowServer[80]
Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2704,0)[1 x 1], Rotation 0, Resolution 1
02/09/2012 15:59:42.262
WindowServer[80]
Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2705,0)[1 x 1], Rotation 0, Resolution 1
02/09/2012 15:59:42.262
WindowServer[80]
CGXMuxBoot: Boot normal
02/09/2012 15:59:42.326
WindowServer[80]
GLCompositor: GL renderer id 0x01021b06, GL mask 0x00000007, accelerator 0x00003d63, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
02/09/2012 15:59:42.326
WindowServer[80]
GLCompositor: GL renderer id 0x01021b06, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
02/09/2012 15:59:42.326
WindowServer[80]
GLCompositor: GL renderer id 0x01024301, GL mask 0x00000008, accelerator 0x00004477, unit 3, caps QEX|QGL|MIPMAP, vram 451 MB
02/09/2012 15:59:42.327
WindowServer[80]
GLCompositor: GL renderer id 0x01024301, GL mask 0x00000008, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
02/09/2012 15:59:42.338
WindowServer[80]
Unable to open IOHIDSystem (e00002bd)
02/09/2012 15:59:42.000
kernel[0]
virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
02/09/2012 15:59:44.258
WindowServer[80]
**DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
02/09/2012 15:59:44.284
WindowServer[80]
Received display connect changed for display 0x4272dc0
02/09/2012 15:59:44.324
WindowServer[80]
CGXMuxAcknowledge: Posting glitchless acknowledge
02/09/2012 15:59:44.342
WindowServer[80]
Received display connect changed for display 0x4272dc0
02/09/2012 15:59:44.342
WindowServer[80]
Received display connect changed for display 0x3f003d
02/09/2012 15:59:44.342
WindowServer[80]
Received display connect changed for display 0x3f003e
02/09/2012 15:59:44.687
com.apple.SecurityServer[15]
Entering service
02/09/2012 15:59:44.714
systemkeychain[71]
done file: /var/run/systemkeychaincheck.done
02/09/2012 15:59:44.724
configd[18]
network changed: DNS*
02/09/2012 15:59:44.727
kdc[45]
WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
02/09/2012 15:59:44.727
mDNSResponder[39]
D2D_IPC: Loaded
02/09/2012 15:59:44.727
mDNSResponder[39]
D2DInitialize succeeded
02/09/2012 15:59:44.740
Symantec Error Reporting[63]
Symantec Error Reporting Daemon beginning submission for domain local-domain.
02/09/2012 15:59:44.741
Symantec Error Reporting[63]
Symantec Error Reporting Daemon: Submitting 0 error reports.
02/09/2012 15:59:44.741
Symantec Error Reporting[63]
Symantec Error Reporting Daemon: Submitting 2 reports.
02/09/2012 15:59:44.778
netbiosd[81]
Unable to start NetBIOS name service:
02/09/2012 15:59:45.077
Extractor[64]
Profile: npfmac4
02/09/2012 15:59:45.077
Extractor[64]
Could not upload /var/tmp/tmp.0.LSxwVC. Error: [Login Error: Could not resolve host: upload4.symantec.com; nodename nor servname provided, or not known]
02/09/2012 15:59:45.957
UserEventAgent[11]
Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
02/09/2012 15:59:46.180
kdc[45]
KDC started
02/09/2012 15:59:46.363
awacsd[57]
Starting awacsd connectivity-77 (Jun 20 2012 15:40:49)
02/09/2012 15:59:46.366
awacsd[57]
InnerStore CopyAllZones: no info in Dynamic Store
02/09/2012 15:59:46.460
sudo[117]
root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
02/09/2012 15:59:47.177
loginwindow[42]
Login Window Application Started
02/09/2012 15:59:47.191
loginwindow[42]
**DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
02/09/2012 15:59:48.398
WindowServer[80]
Created shield window 0x8 for display 0x04272dc0
02/09/2012 15:59:48.398
WindowServer[80]
Display 0x04272dc0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
02/09/2012 15:59:48.412
WindowServer[80]
Display 0x04272dc0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
02/09/2012 15:59:49.781
SymSharedSettingsd[124]
Settings server starting up.
02/09/2012 15:59:49.849
digest-service[112]
label: default
02/09/2012 15:59:49.849
digest-service[112]
dbname: od:/Local/Default
02/09/2012 15:59:49.849
digest-service[112]
mkey_file: /var/db/krb5kdc/m-key
02/09/2012 15:59:49.849
digest-service[112]
acl_file: /var/db/krb5kdc/kadmind.acl
02/09/2012 15:59:49.852
digest-service[112]
digest-request: uid=0
02/09/2012 15:59:49.873
rpcsvchost[125]
sandbox_init: com.apple.msrpc.netlogon.sb succeeded
02/09/2012 15:59:49.877
digest-service[112]
digest-request: init request
02/09/2012 15:59:49.880
digest-service[112]
digest-request: init return domain: BUILTIN server: YUNG-JU-CHUAS-MACBOOK-PRO
02/09/2012 15:59:50.058
SymDaemon[60]
+++ SymLM::SkuKey 0x10251a150 (# 1) - 1 alive +++
02/09/2012 15:59:50.476
locationd[43]
NOTICE,Location icon should now be in state 0
02/09/2012 15:59:50.788
coreaudiod[103]
2012-09-02 03:59:50.787831 PM [AirPlay] Started browsing for _airplay._tcp.
02/09/2012 15:59:50.789
coreaudiod[103]
2012-09-02 03:59:50.788665 PM [AirPlay] Started browsing for _raop._tcp.
02/09/2012 15:59:51.316
WindowServer[80]
Display 0x04272dc0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
02/09/2012 15:59:51.332
launchctl[129]
com.apple.findmymacmessenger: Already loaded
02/09/2012 15:59:51.352
com.apple.SecurityServer[15]
Session 100004 created
02/09/2012 15:59:51.563
hidd[47]
CGSShutdownServerConnections: Detaching application from window server
02/09/2012 15:59:51.563
hidd[47]
CGSDisplayServerShutdown: Detaching display subsystem from window server
02/09/2012 15:59:51.666
ALSPlugin 235.55[47]
Failed to get brightness for displayID 0x04272dc0
02/09/2012 15:59:52.287
UserEventAgent[131]
cannot find useragent 1102
02/09/2012 15:59:52.288
loginwindow[42]
Login Window Started Security Agent
02/09/2012 15:59:53.034
WindowServer[80]
3891612: App SecurityAgent cannot order in untagged windows before login.
02/09/2012 15:59:53.034
WindowServer[80]
kCGErrorInvalidOperation: CGXOrderWinsAndPanels: error ordering window
02/09/2012 15:59:54.825
SymDaemon[60]
ZSharedObject::Attach - 0x100525a70 already deleted - BACKTRACE:
02/09/2012 15:59:55.601
DictationIM[143]
3891612: (connect_and_check) Untrusted apps are not allowed to connect to or launch Window Server before login.
02/09/2012 15:59:55.601
DictationIM[143]
Window Server is not available.
02/09/2012 15:59:55.601
DictationIM[143]
Window Server is not available.
02/09/2012 15:59:55.601
DictationIM[143]
Window Server is not available.
02/09/2012 15:59:55.601
DictationIM[143]
Window Server is not available.
02/09/2012 15:59:55.630
SecurityAgent[138]
This is the first run
02/09/2012 15:59:55.631
SecurityAgent[138]
MacBuddy was run = 0
02/09/2012 15:59:55.665
SecurityAgent[138]
spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
02/09/2012 15:59:55.665
SecurityAgent[138]
spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
02/09/2012 15:59:55.992
SymDaemon[60]
0 SymBase 0x0000000100038bc0 _ZN13ZSharedObject6AttachEv + 74
02/09/2012 15:59:55.992
SymDaemon[60]
1 SymSharedSettings 0x00000001000a6760 _ZNK6SymSS29ZssObject11DescriptionEPc + 1800
02/09/2012 15:59:55.993
SymDaemon[60]
2 SymSharedSettings 0x000000010009ecac _ZN6SymSS29ZssStDataC1EPKcm + 716
02/09/2012 15:59:55.993
SymDaemon[60]
3 SymSharedSettings 0x000000010009adf2 _ZN6SymSS213ZssConnection19OpenOrCreateSettingEPPNS_12ZssContainerEjPKcj + 508
02/09/2012 15:59:55.993
SymDaemon[60]
4 SymPersonalFirewall 0x0000000102798b63 _ZN5SymFW16AutoSetupCluster4copyEPN6SymSS213ZssConnectionEj + 201
02/09/2012 15:59:55.993
SymDaemon[60]
5 SymAutoSetup 0x00000001004d5492 AutoSetupDaemonPlugInFactory + 12439
02/09/2012 15:59:55.993
SymDaemon[60]
6 SymDaemon 0x000000010000a449 main + 17446
02/09/2012 15:59:55.993
SymDaemon[60]
7 SymDaemon 0x000000010000e7e2 main + 34751
02/09/2012 15:59:55.993
SymDaemon[60]
8 SymDaemon 0x000000010000e8b7 main + 34964
02/09/2012 15:59:55.993
SymDaemon[60]
9 SymDaemon 0x000000010000dc23 main + 31744
02/09/2012 15:59:55.993
SymDaemon[60]
10 SymBase 0x0000000100045d60 _ZN12SymException14DispatchSync_fEP16dispatch_queue_sPvPFvS2_E + 56
02/09/2012 15:59:55.993
SymDaemon[60]
11 SymDaemon 0x000000010000daa2 main + 31359
02/09/2012 15:59:55.993
SymDaemon[60]
12 SymDaemon 0x000000010000a867 main + 18500
02/09/2012 15:59:55.993
SymDaemon[60]
13 SymBase 0x000000010004366b _ZN12SymException13ExceptionDataD1Ev + 39
02/09/2012 15:59:55.993
SymDaemon[60]
14 libdispatch.dylib 0x00007fff934cb0fa _dispatch_client_callout + 8
02/09/2012 15:59:55.993
SymDaemon[60]
15 libdispatch.dylib 0x00007fff934cc4c3 _dispatch_queue_drain + 235
02/09/2012 15:59:55.993
SymDaemon[60]
16 libdispatch.dylib 0x00007fff934cc335 _dispatch_queue_invoke + 52
02/09/2012 15:59:55.994
SymDaemon[60]
17 libdispatch.dylib 0x00007fff934cc207 _dispatch_worker_thread2 + 249
02/09/2012 15:59:55.994
SymDaemon[60]
18 libsystem_c.dylib 0x00007fff8cfe3ceb _pthread_wqthread + 404
02/09/2012 15:59:55.994
SymDaemon[60]
19 libsystem_c.dylib 0x00007fff8cfce1b1 start_wqthread + 13
02/09/2012 15:59:57.665
com.apple.launchd[1]
(com.symantec.nav.migrateqtf) Bug: 12B19: launchd + 33673 [AEF41441-17BC-36E6-B1F8-57BADBDFEBCF]: 0x10000003
02/09/2012 15:59:58.312
SystemStarter[110]
StartOuc (116) did not complete successfully
02/09/2012 15:59:58.313
SystemStarter[110]
The following StartupItems failed to start properly:
02/09/2012 15:59:58.313
SystemStarter[110]
/Library/StartupItems/StartOuc
02/09/2012 15:59:58.313
SystemStarter[110]
- execution of Startup script failed
02/09/2012 15:59:58.441
configd[18]
subnet_route: write routing socket failed, Network is unreachable
02/09/2012 15:59:58.490
ReportCrash[147]
DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
02/09/2012 16:00:00.168
configd[18]
network changed: v4(en0+:169.254.35.103) DNS+ Proxy+ SMB
02/09/2012 16:00:01.368
awacsd[57]
Exiting
02/09/2012 16:00:01.404
configd[18]
setting hostname to "yung-ju-chuas-macbook-pro.local"
02/09/2012 16:00:23.007
ReportCrash[147]
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
02/09/2012 16:00:23.007
ReportCrash[147]
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
02/09/2012 16:00:23.007
ReportCrash[147]
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
02/09/2012 16:00:23.007
ReportCrash[147]
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
02/09/2012 16:00:23.008
ReportCrash[147]
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
02/09/2012 16:00:23.008
ReportCrash[147]
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
02/09/2012 16:00:23.008
ReportCrash[147]
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
02/09/2012 16:00:23.008
ReportCrash[147]
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
02/09/2012 16:00:23.008
ReportCrash[147]
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
02/09/2012 16:00:23.009
ReportCrash[147]
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
02/09/2012 16:00:23.111
com.apple.launchd[1]
(com.symantec.symdaemon[60]) Job appears to have crashed: Segmentation fault: 11
02/09/2012 16:00:24.122
SymDaemon[167]
+++ SymLM::SkuKey 0x102600080 (# 1) - 1 alive +++
02/09/2012 16:00:27.000
kernel[0]
Sandbox: sandboxd(168) deny mach-lookup com.apple.coresymbolicationd
02/09/2012 16:00:32.415
ReportCrash[147]
Saved crash report for SymDaemon[60] version 5.1 (3) to /Library/Logs/DiagnosticReports/SymDaemon_2012-09-02-160032_Yung-Ju-Chuas-MacBo ok-Pro.crash
02/09/2012 16:00:36.186
SecurityAgent[138]
User info context values set for yjchua
02/09/2012 16:00:37.410
SecurityAgent[138]
Login Window login proceeding
02/09/2012 16:00:38.351
loginwindow[42]
Login Window - Returned from Security Agent
02/09/2012 16:00:38.357
DictationIM[143]
Window Server is not available.
02/09/2012 16:00:38.357
DictationIM[143]
Window Server is not available.
02/09/2012 16:00:38.357
DictationIM[143]
Window Server is not available.
02/09/2012 16:00:38.357
DictationIM[143]
Window Server is not available.
02/09/2012 16:00:38.556
loginwindow[42]
USER_PROCESS: 42 console
02/09/2012 16:00:39.360
com.apple.launchd.peruser.501[176]
(com.BlueStacks.AppPlayer.LogRotator) Bug: 12B19: launchd + 101332 [AEF41441-17BC-36E6-B1F8-57BADBDFEBCF]: 0x16
02/09/2012 16:00:39.360
com.apple.launchd.peruser.501[176]
(com.BlueStacks.AppPlayer.Service) Bug: 12B19: launchd + 101332 [AEF41441-17BC-36E6-B1F8-57BADBDFEBCF]: 0x16
02/09/2012 16:00:39.360
com.apple.launchd.peruser.501[176]
(com.BlueStacks.AppPlayer.UpdaterAgent) Bug: 12B19: launchd + 101332 [AEF41441-17BC-36E6-B1F8-57BADBDFEBCF]: 0x16
02/09/2012 16:00:39.362
com.apple.launchd.peruser.501[176]
(com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
02/09/2012 16:00:39.367
loginwindow[42]
Connection with distnoted server was invalidated
02/09/2012 16:00:39.374
distnoted[179]
# distnote server agent absolute time: 92.947071690 civil time: Sun Sep 2 16:00:39 2012 pid: 179 uid: 501 root: no
02/09/2012 16:00:40.074
WindowServer[80]
**DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
02/09/2012 16:00:40.477
WindowServer[80]
Display 0x04272dc0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
02/09/2012 16:00:40.545
NetworkBrowserAgent[195]
Starting NetworkBrowserAgent
02/09/2012 16:00:41.354
com.apple.SecurityServer[15]
Session 100007 created
02/09/2012 16:00:41.671
Symantec Error Reporting[218]
Symantec Error Reporting Daemon launched.
02/09/2012 16:00:41.743
com.apple.launchd.peruser.501[176]
(com.apple.afpstat-qfa[215]) Exited with code: 2
02/09/2012 16:00:41.000
kernel[0]
CODE SIGNING: cs_invalid_page(0x1000): p=221[GoogleSoftwareUp] clearing CS_VALID
02/09/2012 16:00:41.978
coreservicesd[65]
SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationCreation to notificationID=134
02/09/2012 16:00:42.784
WindowServer[80]
CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
02/09/2012 16:00:44.371
Symantec Error Reporting[218]
Symantec Error Reporting Daemon beginning submission for domain current-user.
02/09/2012 16:00:44.372
Symantec Error Reporting[218]
Symantec Error Reporting Daemon: Submitting 0 error reports.
02/09/2012 16:00:44.372
Symantec Error Reporting[218]
Symantec Error Reporting Daemon: Nothing to submit.
02/09/2012 16:00:44.374
blued[166]
kBTXPCUpdateUserPreferences gConsoleUserUID = 501
02/09/2012 16:00:44.408
locationd[243]
NOTICE,Location icon should now be in state 0
02/09/2012 16:00:44.465
SocialPushAgent[202]
Error: unable to get the current device-token:(null) and/or the uuid:(null)
02/09/2012 16:00:44.467
SocialPushAgent[202]
Error: unable to get the current device-token:(null) and/or the uuid:(null)
02/09/2012 16:00:45.831
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA392A9D0 GUID: Jabber;-;[email protected] Style: - Participants: (
"[email protected]"
) Room Name: (null) Identifier: [email protected]]
02/09/2012 16:00:45.833
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA392E140 GUID: Jabber;-;[email protected] Style: - Participants: (
"[email protected]"
) Room Name: (null) Identifier: [email protected]]
02/09/2012 16:00:45.837
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA3931180 GUID: Jabber;-;chat.facebook.com Style: - Participants: (
"chat.facebook.com"
) Room Name: (null) Identifier: chat.facebook.com]
02/09/2012 16:00:45.841
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA3936360 GUID: Jabber;-;[email protected] Style: - Participants: (
"[email protected]"
) Room Name: (null) Identifier: [email protected]]
02/09/2012 16:00:45.843
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA3937C10 GUID: Jabber;-;[email protected] Style: - Participants: (
"[email protected]"
) Room Name: (null) Identifier: [email protected]]
02/09/2012 16:00:45.865
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA3927690 GUID: Jabber;-;[email protected] Style: - Participants: (
"[email protected]"
) Room Name: (null) Identifier: [email protected]]
02/09/2012 16:00:46.364
WindowServer[80]
reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 4.58 seconds (server forcibly re-enabled them after 1.00 seconds)
02/09/2012 16:00:46.424
CalendarAgent[212]
[com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fdd5e150b20 {NSUnderlyingError=0x7fdd5c61c0c0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://yjchua95%[email protected]/principals///yjchua95%[email protected]/principals/, NSErrorFailingURLKey=https://yjchua95%[email protected]/principals///yjchua95%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
02/09/2012 16:00:50.809
SystemUIServer[190]
*** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
02/09/2012 16:00:50.810
SystemUIServer[190]
*** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
02/09/2012 16:00:53.139
locationd[255]
NOTICE,Location icon should now be in state 0
02/09/2012 16:00:53.410
imagent[208]
[Warning] Bag loading failed! Error (NSURLErrorDomain:-1009): The Internet connection appears to be offline. http://init.ess.apple.com/WebObjects/VCInit.woa/wa/getBag?ix=1
02/09/2012 16:00:53.411
imagent[208]
[Warning] Bag loading failed! Error (NSURLErrorDomain:-1009): The Internet connection appears to be offline. http://init-p01md.apple.com/bag
02/09/2012 16:00:55.345
WindowServer[80]
CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
02/09/2012 16:00:55.452
WindowServer[80]
reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.11 seconds (server forcibly re-enabled them after 1.00 seconds)
02/09/2012 16:00:55.848
Adobe Reader Updater Helper[225]
Adobe Reader Updater encountered errorCode 260
02/09/2012 16:00:55.995
Adobe Reader Updater Helper[225]
Adobe Reader Updater encountered errorCode 1001
02/09/2012 16:01:03.974
assistantd[213]
<Error>: AceConnection - NSStreamEventErrorOccurred <__NSCFOutputStream: 0x7f921d5041e0>, error = Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)" UserInfo=0x7f921ea138e0 {kCFGetAddrInfoFailureKey=8}, domain = kCFErrorDomainCFNetwork, code = 2
02/09/2012 16:01:03.000
kernel[0]
Symantec Vulnerability Protection loaded new signatures successfully.
02/09/2012 16:01:04.000
assistantd[213]
<Error>: Session - Connection error: <ADAceConnection: 0x7f921bc22fd0> Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)" UserInfo=0x7f921ea152d0 {kCFGetAddrInfoFailureKey=8}
02/09/2012 16:01:04.001
assistantd[213]
<Error>: Daemon - Session Error Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)" UserInfo=0x7f921ea152d0 {kCFGetAddrInfoFailureKey=8}
02/09/2012 16:01:05.620
configd[18]
SCNC: start, triggered by SystemUIServer, type PPPoE, status 0
02/09/2012 16:01:06.496
pppd[261]
pppd 2.4.2 (Apple version 596.13) started by yjchua, uid 501
02/09/2012 16:01:06.636
pppd[261]
PPPoE connecting to service 'Streamyx' [access concentrator '']...
02/09/2012 16:01:06.000
kernel[0]
PPPoE domain init
02/09/2012 16:01:07.129
pppd[261]
PPPoE connection established.
02/09/2012 16:01:07.132
pppd[261]
Connect: ppp0 <--> socket[34:16]
02/09/2012 16:01:07.931
pppd[261]
PAP authentication succeeded
02/09/2012 16:01:08.280
pppd[261]
local IP address 60.48.248.51
02/09/2012 16:01:08.281
pppd[261]
remote IP address 219.93.218.177
02/09/2012 16:01:08.281
pppd[261]
primary DNS address 202.188.0.133
02/09/2012 16:01:08.281
pppd[261]
secondary DNS address 202.188.1.5
02/09/2012 16:01:08.286
configd[18]
network changed: v4(en0:169.254.35.103) DNS* Proxy SMB
02/09/2012 16:01:08.299
configd[18]
network changed: v4(ppp0+:60.48.248.51, en0) DNS! Proxy! SMB
02/09/2012 16:01:08.772
SIMBL Agent[216]
No identifier for bundle at path '/Library/Application Support/SIMBL/Plugins/XSetApplicationIconImage.bundle'
02/09/2012 16:01:09.394
configd[18]
setting hostname to "51.248.48.60.klj03-home.tm.net.my"
02/09/2012 16:01:12.152
com.apple.SecurityServer[15]
Session 100005 created
02/09/2012 16:01:15.383
digest-service[280]
label: default
02/09/2012 16:01:15.383
digest-service[280]
dbname: od:/Local/Default
02/09/2012 16:01:15.383
digest-service[280]
mkey_file: /var/db/krb5kdc/m-key
02/09/2012 16:01:15.383
digest-service[280]
acl_file: /var/db/krb5kdc/kadmind.acl
02/09/2012 16:01:15.384
digest-service[280]
digest-request: uid=0
02/09/2012 16:01:15.387
digest-service[280]
digest-request: init request
02/09/2012 16:01:15.388
digest-service[280]
digest-request: init return domain: MACBOOKPRO-4168 server: 51
02/09/2012 16:01:15.425
mdwrite[278]
[ERROR] [0.000s] com.apple. UBItemStatusNotification.c:805 _do_UBItemStatusNotificationRegisterURLs() can't find realpath for "/Users/yjchua/Library/Mobile Documents/com~apple~system~spotlight/mdlabels", was blocked at "/Users/yjchua/Library/Mobile Documents": 2 (No such file or directory)
02/09/2012 16:01:15.425
mdwrite[278]
[ERROR] [0.001s] com.apple. UBItemStatusNotification.c:805 _do_UBItemStatusNotificationRegisterURLs() can't find realpath for "/Users/yjchua/Library/Mobile Documents/com~apple~system~spotlight/mdlabels", was blocked at "/Users/yjchua/Library/Mobile Documents": 2 (No such file or directory)
02/09/2012 16:01:16.928
SIMBL Agent[216]
No identifier for bundle at path '/Library/Application Support/SIMBL/Plugins/XSetApplicationIconImage.bundle'
02/09/2012 16:02:10.346
com.apple.launchd[1]
(com.apple.xprotectupdater[25]) Exited with code: 255
02/09/2012 16:02:16.166
SIMBL Agent[216]
No identifier for bundle at path '/Library/Application Support/SIMBL/Plugins/XSetApplicationIconImage.bundle'
02/09/2012 16:02:17.497
librariand[303]
MMe quota status changed: under quota
02/09/2012 16:02:19.621
TextEdit[300]
Couldn't contact spell checker for U.S. English
02/09/2012 16:02:21.768
WindowServer[80]
CGXDeferSurfaces : Invalid source window 85
02/09/2012 16:02:21.768
WindowServer[80]
CGXDeferSurfaces : Invalid source window 84
02/09/2012 16:02:40.569 -
I can not reinstall and get started Firefox again after crashed.
With Facebook on display, click on the site identity button (for details on what that is see the [[site identity button]] article) and then on More Information. This will open up the page info dialog.
First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
This should hopefully resolve your issue, but also see [[Images or animations do not show]].
Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images. -
Opening VI and consuming 100% CPU power
I am trying to debug my VI. The first few times the VI ran well but suddenly the VI hang up. I have no choice but to end the LabView process using the Task Manager. When I try to restart this VI again, it fails to open and the Task Manager indicates that the LabView program is now consuming 100% of the CPU time but still fail to open this VI. Looks like it is entering into an infinite loop. I cannot fix anything for I cannot go into my VI to change anything. LabView just consumes all the CPU power and do nothing. What went wrong?
Regards,
LarryOkay. That is very strange. I am seeing the same behavior. (I have LV 8.2)
When I first downloaded the VI, it opened just fine. If I did a saveas, closed the VI, and reopened the copy, I got 99% CPU usage. I reopened the one from the message, no problem. I left that one open and tried opening the one I had saved. It said I already had one in memory by that name do I want to view the one in memory or replace? I said replace. When it opened to the block diagram, everything was okay. But when I clicked on the window to view the front panel, that is when the CPU usage jumped up again.
So somehow the problem is associated with the FP. Nothing looks particular wrong about your code. The question is how did you manage to get a copy of the file that isn't causing problems when you open it?
I think you will want to recreate the VI from scratch. You are able to view a copy to see whay you have which is good. And it doesn't look too complicated.
What is interesting is that if I delete everything from the VI's block diagram (leaving nothing apparent on the FP), save, close, reopen, I still get the extreme CPU Usage. It seems confined to LV, as I am still able to switch over and working within the browser to answer this message.
Message Edited by Ravens Fan on 04-16-2007 02:30 PM -
7 year, 100+ PC Veteran Stumped ! Power, and performance issues. Full detail included.
Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!)
AMD Athlon 64 3200+ (New Castle)
Thermaltake Venus 12 CPU Cooler w/ Manual Adjust
MSI "K8T Neo-FIS2R" K8T800
512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T)
Antec TruePower 430w PS (+5V@36A +3.3V@28A +12V@20A)
Gainward Dual DVI w/ VIVO GeForce FX5700 Ultra
2x Viewsonic 19" VX900 LCD Monitors
Creative SoundBlaster Audigy Platinum eX
Plextor 712a Black 12x+/8x- DVD-RW
Lite-On SOHD-167T Black 16x DVD-ROM
Western Digital WD740GD 74GB 10,000rpm Raptor SATA
Western Digital WD2500JB 250GB 7,200rpm 8MB IDE
Seagate Barracuda ST3200822AS 200GB 7,200rpm 8MB IDE
Lian-Li PC-65B Black Aluminum Case
Vantech PCI Slot Fan
CyberPower 825va Voltage Regulating UPS
Windows XP Professional SP1a
There we have it, I think that that is all you need to know to perhaps give opinions and advice. Allow me to elaborate on why I am posting today after browsing this wonderful forum for the last two weeks. (...and by the way, my hat's off to some of you knowledgeable regulars for helping out a lot of newbies and folks in trouble!) Without further adieu:
Problem #1: POWER ISSUE
When, or if, I remove AC Power from my PC for whatever reason I run into a problem in which after reconnecting the AC Power and attempting to turn on the computer it goes into a 3-5 second startup loop in which the PC does not post, but rather cycles power to all of the components indefinitely. I notice the LEDs on my optical drives cycling repeatedly ad infinitum until I power off using the 4-second hold method, and then press the power button again. At this point the PC boots up fine, and boots up fine going forward from all restarts and shut downs. How strange? I've never, EVER, encountered something like this before.
Problem #2: PERFORMANCE ISSUE
This PC has a handful of serious performace issues.
3dMark03 scored horribly.
Prime95 runs ridiculously slow although there are no erros! It runs much more quickly on my work PC which is a PIII 866mhz with 384MB of PC133 RAM.
I receive, on no regular frequency, or while doing anything in particular, Explorer memory errors. Not BSOD's mind you, but "...blah blah blah referenced memory address xxxxx-xxxxx and could not be written". This causes Explorer to restart itself, blowing away the start menu, task bar, and any Explorer windows open. They reappear, of course, without incident.
The most off performance issue of all is that when opening an Explorer window for either of my IDE HDs, designated D and E drives, I find that when using the highlighting rectangle tool the Explorer window freezes or lags. I can double-click and open or move/copy files without incident, but if I attempt to highlight by this method this halt or lag occurs.
Also, since my update of the BIOS from 1.2 to 1.7, and then to 1.8 system startup times prior to Windows loading are HORRID. I have disabled just about everything, and yet the SATA BIOS loads for 5 seconds, and then I must wait 20 seconds for Windows itself to come to the login screen. No other BIOS related issues to report per se, but this is terrible for what should be a blazingly fast computer.
Now let's see.. what have I tried to do to repair the issues?
1) 2 BIOS flashes. First from 1.2->1.7, and then from 1.7->1.8. Ostensibly this was just "because". The power user need to have the latest! I noticed the incorrect CPU temperature being reported, however.. This led to me buying this massive ThermalTake HSF to replace my stocker. I also added more thermal goop than I ever have before, as well as a PCI slot fan before I became aware that it was a BIOS issue! GRRRR MSI.
2) I thought perhaps for the one issue that one of the hard drives was an issue, and even perhaps for power, but I replaced each with new drives and tested all 4 on another PC. NO problems. Also I should perhaps mention that my IDE drives are all hooked up using Antec Cobra cables. Expensive yes, but why the hell not, right? I've never seen a hang-off grounding wire for IDE before. Decided not to use them as I could think of a great place to screw them in, nor have other PC using them had trouble skipping the ground wire.
3) I unplugged every molex cable, the 4-pin CPU power, and the 20-pin ATX power and rerranged them all - as well as removed and then reinserted the RAM.
4) I tried changing my memory timings and power management settings, etc in BIOS. Nothing seem to impact the issue. I didn't fiddle with the voltages, but I should not need to running the RAM at SPD or lower settings and without overclocking the system at all!
5) Another issue that I had that seems to have vanished, come back, vanished, and then come back a "little bit" is my USB ports. When set to enable legacy devices in BIOS my USB items like my Logitech wireless keyboard would just cycle power and refuse to function. Also my UPS connected VIA USB seems to sometimes handshake with Windows and sometimes not. I've tried using all of the different ports, etc but the problem remains. I NEED 6 ports for my devices so it is all that I could do!
6) I have an Enermax 550w EG651P-VE(FMA) with 36 amps on each voltage rail on it's way, and it should arrive tomorrow. Despite all of the crap regarding power supplies that I see on this board I am not confident that it's the problem. That Antec PSU should be able to hold it's on with 20 amps on the +12v channel. C'mon now. I build a nearly identical system with the same power supply for a customer and he has no problems at all. He also has 3 HDs, same motherboard, etc.. the only difference is he has but one optical drive and a 2800+ rather than a 3200+. That power difference should be decimal nature in amps needed.
...oh and the sound card is in PCI slot 3, for those that remember the glory days of sound card IRQ issues that Creative was once notorious for... oh, and I disable the ethernet boot device, etc so my slow startups should not be related. My serial ATA drive is also on connection 1 of the VIA controller.. Promise can kiss my a**.
Soooo.. Show me what a n00b I am, oh great ones. I've built over 100 PCs since 1998 for myself, friends, families, and customers... and I've never seen an issue like this one! I'm no dummy, but please don't assume too much. Other pros on here know full well you can forget the most simple mundane detail in spite of experience! I want to solve this problem. I am on the verge of shelling out for a new motherboard and processor of the 939 pin variety.. and am now wary of MSI's long awaited socket 939 K8 Neo2 board despite it's awesome reviews. MSI has never really given me trouble before.. but I don't really want to spend money to the order of $200+ for that damned Gigabyte board. Gigabyte has always been good to me as well. Save my wallet! PLEASE!!!
Thanks so much everyone, I tried very hard not to leave out any details!
Az (Ian)
You can reach me on Yahoo or AIM just about any time, and I will check here frequently.Quote
Originally posted by AzaghalSEI
Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!)
AMD Athlon 64 3200+ (New Castle)
Thermaltake Venus 12 CPU Cooler w/ Manual Adjust
MSI "K8T Neo-FIS2R" K8T800
512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T)
Antec TruePower 430w PS (+5V@36A +3.3V@28A +12V@20A)
Gainward Dual DVI w/ VIVO GeForce FX5700 Ultra
2x Viewsonic 19" VX900 LCD Monitors
Creative SoundBlaster Audigy Platinum eX
Plextor 712a Black 12x+/8x- DVD-RW
Lite-On SOHD-167T Black 16x DVD-ROM
Western Digital WD740GD 74GB 10,000rpm Raptor SATA
Western Digital WD2500JB 250GB 7,200rpm 8MB IDE
Seagate Barracuda ST3200822AS 200GB 7,200rpm 8MB IDE
Lian-Li PC-65B Black Aluminum Case
Vantech PCI Slot Fan
CyberPower 825va Voltage Regulating UPS
Windows XP Professional SP1a
There we have it, I think that that is all you need to know to perhaps give opinions and advice. Allow me to elaborate on why I am posting today after browsing this wonderful forum for the last two weeks. (...and by the way, my hat's off to some of you knowledgeable regulars for helping out a lot of newbies and folks in trouble!) Without further adieu:
Problem #1: POWER ISSUE
When, or if, I remove AC Power from my PC for whatever reason I run into a problem in which after reconnecting the AC Power and attempting to turn on the computer it goes into a 3-5 second startup loop in which the PC does not post, but rather cycles power to all of the components indefinitely. I notice the LEDs on my optical drives cycling repeatedly ad infinitum until I power off using the 4-second hold method, and then press the power button again. At this point the PC boots up fine, and boots up fine going forward from all restarts and shut downs. How strange? I've never, EVER, encountered something like this before.
Problem #2: PERFORMANCE ISSUE
This PC has a handful of serious performace issues.
3dMark03 scored horribly.
Prime95 runs ridiculously slow although there are no erros! It runs much more quickly on my work PC which is a PIII 866mhz with 384MB of PC133 RAM.
I receive, on no regular frequency, or while doing anything in particular, Explorer memory errors. Not BSOD's mind you, but "...blah blah blah referenced memory address xxxxx-xxxxx and could not be written". This causes Explorer to restart itself, blowing away the start menu, task bar, and any Explorer windows open. They reappear, of course, without incident.
The most off performance issue of all is that when opening an Explorer window for either of my IDE HDs, designated D and E drives, I find that when using the highlighting rectangle tool the Explorer window freezes or lags. I can double-click and open or move/copy files without incident, but if I attempt to highlight by this method this halt or lag occurs.
Also, since my update of the BIOS from 1.2 to 1.7, and then to 1.8 system startup times prior to Windows loading are HORRID. I have disabled just about everything, and yet the SATA BIOS loads for 5 seconds, and then I must wait 20 seconds for Windows itself to come to the login screen. No other BIOS related issues to report per se, but this is terrible for what should be a blazingly fast computer.
Now let's see.. what have I tried to do to repair the issues?
1) 2 BIOS flashes. First from 1.2->1.7, and then from 1.7->1.8. Ostensibly this was just "because". The power user need to have the latest! I noticed the incorrect CPU temperature being reported, however.. This led to me buying this massive ThermalTake HSF to replace my stocker. I also added more thermal goop than I ever have before, as well as a PCI slot fan before I became aware that it was a BIOS issue! GRRRR MSI.
2) I thought perhaps for the one issue that one of the hard drives was an issue, and even perhaps for power, but I replaced each with new drives and tested all 4 on another PC. NO problems. Also I should perhaps mention that my IDE drives are all hooked up using Antec Cobra cables. Expensive yes, but why the hell not, right? I've never seen a hang-off grounding wire for IDE before. Decided not to use them as I could think of a great place to screw them in, nor have other PC using them had trouble skipping the ground wire.
3) I unplugged every molex cable, the 4-pin CPU power, and the 20-pin ATX power and rerranged them all - as well as removed and then reinserted the RAM.
4) I tried changing my memory timings and power management settings, etc in BIOS. Nothing seem to impact the issue. I didn't fiddle with the voltages, but I should not need to running the RAM at SPD or lower settings and without overclocking the system at all!
5) Another issue that I had that seems to have vanished, come back, vanished, and then come back a "little bit" is my USB ports. When set to enable legacy devices in BIOS my USB items like my Logitech wireless keyboard would just cycle power and refuse to function. Also my UPS connected VIA USB seems to sometimes handshake with Windows and sometimes not. I've tried using all of the different ports, etc but the problem remains. I NEED 6 ports for my devices so it is all that I could do!
6) I have an Enermax 550w EG651P-VE(FMA) with 36 amps on each voltage rail on it's way, and it should arrive tomorrow. Despite all of the crap regarding power supplies that I see on this board I am not confident that it's the problem. That Antec PSU should be able to hold it's on with 20 amps on the +12v channel. C'mon now. I build a nearly identical system with the same power supply for a customer and he has no problems at all. He also has 3 HDs, same motherboard, etc.. the only difference is he has but one optical drive and a 2800+ rather than a 3200+. That power difference should be decimal nature in amps needed.
...oh and the sound card is in PCI slot 3, for those that remember the glory days of sound card IRQ issues that Creative was once notorious for... oh, and I disable the ethernet boot device, etc so my slow startups should not be related. My serial ATA drive is also on connection 1 of the VIA controller.. Promise can kiss my a**.
Soooo.. Show me what a n00b I am, oh great ones. I've built over 100 PCs since 1998 for myself, friends, families, and customers... and I've never seen an issue like this one! I'm no dummy, but please don't assume too much. Other pros on here know full well you can forget the most simple mundane detail in spite of experience! I want to solve this problem. I am on the verge of shelling out for a new motherboard and processor of the 939 pin variety.. and am now wary of MSI's long awaited socket 939 K8 Neo2 board despite it's awesome reviews. MSI has never really given me trouble before.. but I don't really want to spend money to the order of $200+ for that damned Gigabyte board. Gigabyte has always been good to me as well. Save my wallet! PLEASE!!!
Thanks so much everyone, I tried very hard not to leave out any details!
Az (Ian)
You can reach me on Yahoo or AIM just about any time, and I will check here frequently.
The startup problem might just be a screwy psu. Your antec *should* be able to power your stuff just fine, but maybe it is defective in some strange way.
What is your 3dmark03 score? If it is 3000-4000, (approx perf. level of ati 9600xt), then it is fine.
Check your memory using memtest86+, and try underclocking it to ddr333.
UNplug usb devices, and see if it speeds up boot. Also, I would not recommend bios 1.8 since people seem to have some troubles with it.
Also, try disabling agp fast writes, disabling spread spectrum, and maybe boosting ram voltage a tiny bit.
Try booting without your audigy plugged in, and try booting barebones (nothing but 1 hard drive with os) and see what happens.
I'm no expert, but you might get lucky trying these steps. -
I recently bought a 975X Platinum (PowerUp Edition) and when i was getting ready to connect the CPU Power and I noticed that the board has an 8-pin molex connector, but 4 pins are covered up. So my question is should i use a 4 pin CPU power connector or an 8-pin molex for the CPU power? I don't want to damage the CPU so i've waited on hooking up the system.
Any help would be incredibly greatly appreciated. I've read the manual and it doesn't really specify why half the pins come covered up. So as soon as I can get some help on this I'll feel safe powering this system up for the first timeUse your 4 pin Cpu connection. Most Psu's don't have the 8 pin connector that is the reason for the cover, if you do have the 8 pin connector on your Psu you will find that it is a 4x4 pin connector that can be split off for mobos that only have the 4 pin socket. If that is the case you would use the 8 pin plug supplied.
-
High CPU Usage and Temperature
I've recently purchased a MacBook with the latest updates, including the firmware for the random shutdowns but lately when I boot the MacBook up, the fans kick on and it reads 83 degrees Celsius with about 65% CPU Usage and I don't have anything running except what came on the MacBook in itself, any suggestions?? Apple told me to take it in to have it looked at but I was wondering if there is anything I can fix perhaps?? Thank you
Sometimes when I connect an external drive which I have made drastic file changes to, there are two process that eat up a lot of cpu power and get the macbook really hot for awhile, those two processed are related to the way spotlight tries to re-index the external drive or the internal hd itself if I had made drastic changes to it too.
Could it be that?
You can see them show up in Activity Monitor, they are mdimport and another one starting with md(something) too.
Hope that helps (if that's the issue)
Best,
Pedro -
OSMF in AIR has video disapper when switching to fullscreen using AIR runtime 3.8 and above
We have an application that loads StrobeMediaPlayback in an AIR application to play videos. But once we've upgraded to AIR runtime 3.8 and above, the fullscreen stops working: video is missing but audio is still playing. This is reported to be happening to our users using Windows that 64-bit and a few reports with 32-bit Windows (ie Win7 and Win8).
Looking at it closely, it looks like the StageVideo introduced to AIR desktop from AIR 3.8+ runtime was causing the problem. I can disable stageVideo in the player (OSMFSettings.enableStageVideo = false) and it can work fine (or turn off hardware acceleration in the computer). But the real problem I think is that the StageVideoAvailibiltyEvent is not returning the correct value if the machine really supports StageVideo or not. This looks like a bug in AIR runtime.Could you please open a new bug report on this over at https://bugbase.adobe.com? When adding the bug, please include some sample code or a sample application so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the URL so that others effected can add their comments and votes.
Thanks,
Chris -
First and foremost, I need you to understand that over the years I have not only come to heavily rely on Firefox myself, but highly recommended Firefox to literally thousands of people in the course of my work.
The reason for this is very simple... Firefox fast became the most fantastic, configurable and versatile yet highly user-friendly, internet browser in the world! All due to its great: speed and reliability, as well as, crash resistance and economical system resource usage, to name just a few factors!
This is why I'm so upset with you! You establish yourself as the best and then one day just stop being excellent, and start getting worse!
So what have you done?
Ever since version 4, Firefox has progressively regressed in performance and reliability! Firefox is now incapable of running on my computer, without hanging with the CPU power of this quad core machine maxed out! The consequence this freezing has is either: immense frustration on my part right before being forced to kill the process that is not responding from the task manager, or Firefox eventually crashing on its own!
After being so fantastic you start doing this to people? How can you justify this at all?
I am seriously thinking about moving to Google Chrome if this doesn't get resolved ASAP! What do you think about that?
Here is a full list of the latest crash reports, but just from the beginning of August! The list is so big, it didn't fit in the little box you provided below, so here is list:
1. bp-209f18a1-1fa9-43ca-9eba-db3432110824
2. bp-ff6d29a0-e8f4-47e9-b511-6c0f92110822
3. bp-ba22d04d-2afb-45a6-ab08-8ad342110821
4. bp-abafebf9-4d30-4428-87cb-c2aa72110820
5. bp-3ab74d5a-d8fc-4d73-9d88-0918f2110818
6. bp-35afcc7a-0401-42f2-af84-65f1f2110813
7. bp-e1a549f6-733b-4062-a333-879a62110813
8. bp-0d7064fd-41f9-440a-812d-54a5b2110811
9. 63b33a93-9a05-450b-9179-4b3f991a857c
10. 95069d53-be00-4657-90a0-3d127c22042e
11. bp-565c0f54-26c7-4093-804e-f8f8c2110808
12. bp-8755ee08-5530-43c9-a5cf-5eb472110807
13. bp-117aff78-e6dd-4ee5-81d7-c110e2110803
14. bp-b00341c9-7ae8-4b9a-b1bd-d6d722110802
Thank you!How much data is being backed-up from each Mac? (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
Is there any other data on your Time Capsule, besides the backups?
Most likely, there just isn't room. Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't. Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
Also see #C4 in Time Machine - Troubleshooting for more details. -
Multi-select LOV's hang form and use 100% CPU power
Hello,
We are using Designer 6i (6.5.52.1.0) and Headstart 6.5
In one of our forms we are using 6 Multi-select LOV's.
When we click the Cancel or Ok button (included through QMS_MSEL_LOV_BUTTONS), or hit Enter query in one of the ML_... blocks the form hangs and starts using all the CPU-power. I've tested this locally (c/s) and through the web (iAS), same result...
I already rebuilt the LOV's but the problem isn't solved.
We've got other forms with one or two multi-select LOV's, and these work fine.
Has anyone experienced this behaviour before, and what is the cure?
Thanks in advance!
WouterWouter,
If you are running against Solaris, you could be running into the following:
Headstart applications that run via webforms on a Sun Solaris application server, suffer again from bug 1985903. This bug was spotted and solved a time ago and seemed to be solved at next
releases of Forms 6i. Now, on Solaris the bug is introduced again.
Description
===========
1. When using a multi-select LOV (which is displayed in a modal dialog
window), you select the records you want, press OK, and the application exits.
2. When using a shuttle control to move records from left to right or vice
versa, you select the records you want, press '>' to move them, and the
application exits.
This occurs in Forms 6.0.8.13.0 and 6.0.8.14.1. It did NOT occur in prior
releases. This is some kind of forms bug.
Workaround
==========
For some reason the call to procedure renumber in qms$msel.process_records
causes the application to exit. If you copy the code from renumber to all the
places from which it is called, it works fine.
- open qmslib65.pll in Form Builder
- open package body qms$msel
- find procedure process_records and define a local variable l_recno of type
number.
- find local procedure renumber and copy the body of this procedure
(everything
after 'begin' and before 'exception').
- replace each call to 'renumber;' with the copied code.
A new version of qms$msel package body is available on iXchange for download.
See Headstart Oracle Designer 6i, Bugs and Fixes.
Hope this helps,
Marc Vahsen
Headstart Team
Oracle NL -
Macbook Air 2011 CPU Maxes Out then Overheats and Shuts Down...
I've been having this problem for a while now but have learned to deal with it with SMC Fan Control to basically keep my fans maxed out at all times. This is obviously not ideal.
The problem is that at any given time some small, random task in activity monitor shows CPU usage that is very high, often at least 50% CPU and other times as high as 120% It has happened with the tasks like dock, safari web content and virtually any other task you can imagine.
For example, I just tried emptying my recycling bin and it hung half way through then my computer shut down. What is going on here?
Details:
- Macbook Air mid-2011 running Mavericks
- Never have more than one app open at any given time, usually just Safari with about 5 tabs, max
- 3rd party applications running in background include Dropbox, Copy, Backblaze, Flux, Sophos anti virus, Jumpcut, Caffeine and that's it
If I'm doing something like a Time Machine backup, I have to disable Wifi, max out the fans and only then will the Macbook Air remain cool enough to complete the backup, otherwise the Time Machine process maxes out the CPU, overheats and shuts down. This happens with virtually everything now.
How can I start trouble shooting this problem? I've run the hardware and system repair checks with no results, done an SMC reset, etc.
This really seems like a software issue more than anything, like something related to the way tasks/processes are handled...any ideas anyone? This is such an annoying problem!Do the problems also occur in "Safe Mode"?
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well. -
New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on. Sometimes holding the power button for a second is enough for it to come back on.
I took it to the Genius Bar, and they identified it as a hardware issue. Just got it back today. Parts replaced were:
620-5629 Display Module — Symptom: Distored/blurred/focus video issue
605-3284 Top Case with Keyboard — Symptom: specific key(s) do not work
So far so good. I'd suggest taking it in and not trying to work around it — it's a rare hardware issue (given the number of threads about it) and should be replaced. -
My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me
Wrong forum. This is the iPad forum.
-
I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?
If the charging plug fits, use it.
-
11/12/2013 - Release - AIR 3.9 Runtime and SDK
Today we're pleased to announce that the next version of AIR is available for immediate download. This update includes the following new features and improvements:
New Features:
Mobile Workers (concurrency) BETA - Android
Our hugely popular desktop feature, AIR Workers, is now making its debut on mobile! We have added support on Android devices so that you will be able to execute code in the background without interrupting your application’s main code. Your UI will remain responsive, enhancing the user experience. We haven’t forgotten about iOS! Look for news on iOS workers in an upcoming release (NOTE: this feature will undergo an extended beta period.)
AIR Mobile Support for Background Execution in “Direct” Render Mode
AIR now supports background execution on iOS and Android when render mode is set to “direct”. This will allow your applications to perform tasks such as audio playback even when invisible to the user. Due to power and CPU considerations, we recommend reviewing our release notes for additional details and guidance.
In the past AIR on iOS and Android did not support background execution when render mode direct was set. Due to this restriction, Stage3D based apps were not able to execute background tasks like audio playback, location updates, network upload/download etc. iOS does not allow OpenGLES/rendering calls in the background. Applications which attempt to make OpenGL calls in the background are terminated by the iOS. Android does not restrict applications from either making OpenGLES in the background or other background task(like audio playback).
With this feature, we will now allow AIR mobile apps to execute in background when renderMode direct is set. AIR iOS runtime will throw an error if OpenGLES calls are made in background. However no error will be thrown on Android, as Android native apps are allowed to make OpenGLES calls in the background. It's recommended to not make rendering calls while your app is executing in the background as its important to utilize the mobile resources judicially. The following is a list of Stage APIs which may throw the error 3768 - The Stage3D API may not be used during background execution. The swf version should be 22 and above.
Context3D.clear
Context3D.present
Context3D.createVertexBuffer
Context3D.createIndexBuffer
Context3D.drawToBitmapData
IndexBuffer3D.uploadFromVector
IndexBuffer3D.uploadFromByteArray
VertexBuffer3D.uploadFromFloat
VectorVertexBuffer3D.uploadFromFloat4
VectorVertexBuffer3D.uploadFromByteArray
Program3D.upload
Texture.uploadCompressedTextureFromByteArray
Texture.uploadFromBitmapData
Texture.uploadFromByteArray
CubeTexture.uploadFromBitmapData
CubeTexture.uploadFromByteArray
CubeTexture.uploadCompressedTextureFromByteArray
RectangleTexture.uploadFromBitmapData
RectangleTexture.uploadFromByteArray
AIR Support for iOS7
iOS7 has launched and we are making sure that AIR is compatible and performs as expected.
AIR Mac OS 10.9 Support
We have tested against the latest developer releases of OS X 10.9 and are making sure that your applications support the latest technologies such as “App Nap”.
AIR XXHDPI (144 x 144) Icon Support for Android
With this feature we have added support for beautiful, high resolution icons on devices such as the Nexus 10.
Notable bug fixes:
[3650590] [OSX] - App Updater Crashes on MacOS with Air 3.9
[3648442] [iOS7] - Leftmost part of the text in spark TextArea and stageText get clipped when mulitline property is true.
[3640207] [Android] [Captive Application] - orientationChange event handler fetches wrong stage.orientation values.
Known Issues:
[3616981] [iOS] - Sound gets stop on clicking Power button even when UIBackground tag value set to Audio in application.xml
For further information please see our release notes.
Download Locations:
AIR 3.9.0.1210 runtime for Windows: 3.9 Runtime Download
AIR 3.9.0.1210 runtime for Macintosh: 3.9 Runtime Download
AIR 3.9.0.1210 SDK & Compiler for Windows: 3.9 SDK & Compiler Download
AIR 3.9.0.1210 SDK & Compiler for Macintosh: 3.9 SDK & Compiler Download
Note: To provide all the all the necessary tools for our developers in one place and avoid having to download multiple components, we are packaging Adobe AIR 3.9 SDK and ActionScript Compiler 2.0 in a single SDK called “Adobe AIR 3.9 SDK & Compiler”.
AIR SDK 3.9.0.1210 (Compatible with Flex) for Windows: 3.9 SDK Windows Download
AIR SDK 3.9.0.1210 (Compatible with Flex) for Macintosh: 3.9 SDK Macintosh Download
Previous versions of the AIR runtime and SDK can be found on the Archived AIR SDK and Runtimes page
Maybe you are looking for
-
How do I add a scanner to share on my local network?
Hi team. I just got a new Epson V300 scanner and I want to add it to my network to share like my printer does, but I cant seem to find a way to do this. The scanner works fine but only with my iMac.. I cant find a way to get it to show up so I can sh
-
Sync between Macbook Air and Ipad
Good morning, I have a problem concerning a sync via Itunes between my Macbook and Ipad in terms of pictures in Iphoto. I discovered that after the succesful sync all the pictures that are vertical are shown at the end of the event. What I noticed, t
-
Problem in connecting to database..
Hi all, I have deployed a application onto Oracle App Server. In that application i am using sql loader to load file. But it is throwing me: ns main err code: 12560 TNS-12560: TNS:protocol adapter error ns secondary err code: 0 nt main err code: 530
-
Insert collapsible panel in Spry menu
Hi, Can a collapsible panel be inserted into a Spry menu. When clicked, I would like one of my menu items to slide open exposing another menu. Kind of a sub catagory of the menu item. Sorry for the poor discription. Thanks Dennis
-
How to post or use fi upload bapis
hi everybody, this is giri i need some help in bapis upload report. its related to fi module, here i have given details regarding this below. in how to pass data to bapi i dont know .and this bapi containig idoc segenets like IDOC Segment - BAPIACH