Air project works in test but fails when installed.

I have a little project I'm trying to put together as a stand-alone widget. It loads some sounds that are set up in sets and saved in a subdirectory of the application directory. I have a movie clip in the library that appears when the "Config" button is pressed.
Works great in test mode. The sounds are loaded and play. The config screen shows up when the button is pressed. The components (two sliders) work and their listeners fire. Wonderful!
But when I pack it up as an installable AIR file and then actually install it on my poncuter, epic fail. The sliders don't appear, the config button doesn't call up the configure movieClip and no sounds are played. The buttons that I placed on the stage at design time appear but don't appear to function. Nothing I added programmatically appears.
Is this an Adobe CS3 problem or did I miss something in the security sandbox? No files are being written to, I'm getting a directory listing of ./sets and then opening the files in that directory where .isDirectory comes up false. The files are XML and point to a folder off the ./sets folder and the files in that set.
I could probably track this but I have no experience debugging an AIR project. Trace is not working in development. How do people debug the final? Output to a dynamic text field?

Sorry to hear you are having a tough go of it...
there should be no reasons that your application functions differently debugging than when you install the application so the behavior you are seeing is likely something easy to fix (as opposed to having to re-write a bunch of AS code :D).
Couple of Questions:
1.) Are you using CS3 as-is out of the box - or did you manually upgrade your AIR SDK inside Flash Professional to target a later version?
2.) What version of AIR are you targeting?
3.) What version of AIR do you have installed on your system?
4.) What OS are you running on?
5.) Can you install any AIR applications on your machine and have them run properly? (Bunch of AIR apps here: http://www.adobe.com/go/airmarketplace)
6.) It sounds like you are likely using CS3 and not the command line tools - but if you are using the command line tools (ADT) to create your AIR package what command line do you use to create it?
That should help get things rolling...but likely the best course of action is for you to send us your project so we can take a look. You can send your project to cthilgen at adobe.com - please do not send a zip as our mail system will auto-reject it.
Also, you should be able to get trace output. If you are using CS3 the trace output goes to the output panel. (Windows->Output) If you are using the AIR command line tools (ADL) - debug output is enabled by default (you have to manually pass -nodebug to turn it off).
Hope this helps.
Thanks,
Chris Thilgen
AIR Engineering

Similar Messages

CommandAction works through OnDeviceDebug, but not when installed from jar

Hi everybody,
I'm trying to run a HelloMIDlet example and if I run it on emulator it works fine, also when I run it on mobile through OnDeviceDebug from eclipse it works fine, but when I install a jar file and run the application it ends with Application Error message and it exits. I found out that the problem might be in the CommandAction method, because when I use this:
public void commandAction(Command c, Displayable s) {
          notifyDestroyed();
}then the application works also when installed from jar, but when I use this:
public void commandAction(Command c, Displayable s) {
   String label = new String("Exit");   //just for test
   if (label.equals("Exit"))
     notifyDestroyed();
}then it ends with Application Error right after I run the program (and it works when I use OnDeviceDebug). I'm using jdk1.5.0_06 and WTK from Sony Erricsson (my target device is W800i, which supports CLDC1.1 and MIDP2.0)
My manifest file is
Manifest-Version: 1.0
MicroEdition-Configuration: CLDC-1.1
MIDlet-Name: HelloMIDlet
Created-By: Sun Microsystems Inc.
MIDlet-Vendor: Sun Microsystems, Inc.
MIDlet-1: HelloMIDlet, , HelloMIDlet
MIDlet-Version: 1.0
MicroEdition-Profile: MIDP-2.0
MIDlet-Description: Hello Worldand I don't use the jad file when installing the application (seems to be unecessary when you have a manifest file inside the jar). And I'm unable to debug it because when debugging then it works normally. Also I tried to recompile the BluetoothDemo and the same error(and works through OnDeviceDebug). And when I installed the jar file, which is originally distributed with BluetoothDemo then it worked. When I compared original jar file and my jar file then the only difference was in the size the class files (class files compiled by me were bigger then the class files in original jar file (which work)).
Any ideas guys and girls?

I tried that approach but it doesn't work either. I think maybe my directory structure is wrong.
C:\IRS\IRS.jar
C:\IRS\irs.hs
referenced: jar:file://C:/IRS/IRS.jar!/irs.hs
Am I doing this right?

Tried to install new version X1 but fails when installing client B928

I still have no idea what "B928" is; a screenshot of what you are seeing may be most helpful.
In the meantime I suggest that you download and run the offline installer from http://get.adobe.com/reader/enterprise/

Unit test runs perfectly fine with NUnit but fails when run from TestExplorer

Hello all,
I have a TestProject, Harmony.Tests. In there, I have a method AddApplicationEvent()
which calls another method Send(InvokeRequestMessage requestMessage) which calls a webservice (OperationHandlerBrokerWebService).
The code snippet looks like this. This is not the complete code but a part where we are calling the web service. It fails on the underlined Italic line of code.
OperationHandlerBrokerWebService brokerService = new OperationHandlerBrokerWebService();
brokerService.UseDefaultCredentials = true;
brokerService.Url = address;
brokerService.Timeout = timeoutInMilliseconds;
byte[] serializedResponseMessage = brokerService.InvokeOperationHandler(serializedRequestMessage);
The same test works and passed fine when I ran it with NUnit, but failed with following exception when I tried to run it from TestExplorer.
Test Name: AddApplicationEvent
Test FullName: N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.AddApplicationEvent
Test Source: d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs : line 665
Test Outcome: Failed
Test Duration: 0:00:00.296
Result Message:
SetUp : Message returned System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: Invalid token for impersonation - it cannot be duplicated.
at System.Security.Principal.WindowsIdentity.CreateFromToken(IntPtr userToken)
at System.Security.Principal.WindowsIdentity..ctor(SerializationInfo info)
at System.Security.Principal.WindowsIdentity..ctor(SerializationInfo info, StreamingContext context)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._SerializationInvoke(Object target, SignatureStruct& declaringTypeSig, SerializationInfo info, StreamingContext context)
at System.Reflection.RuntimeConstructorInfo.SerializationInvoke(Object target, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.CompleteISerializableObject(Object obj, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.FixupSpecialObject(ObjectHolder holder)
at System.Runtime.Serialization.ObjectManager.DoFixups()
at System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream)
at N4S.Forms.OperationHandlerBroker.AMessage.DeserializeMessage(Byte[] serializedMessage)
at N4S.Forms.OperationHandlerBroker.WebServiceServer.BrokerService.InvokeOperationHandler(Byte[] serializedInvokeRequestMessage)
--- End of inner exception stack trace ---
expected: <0>
but was: <1>
Result StackTrace:
at N4S.Harmony.Tests.TestHelper.InvokeOperation(OperationHandler handler, OperationHandlerInput input, Boolean expectedToWork) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 136
at N4S.Harmony.Tests.TestHelper.LoginAsUser(String username, String password) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 394
at N4S.Harmony.Tests.TestHelper.Login(TestUserName requestedUser) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 377
at N4S.Harmony.Tests.TestHelper.LoginAsAdvisor() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 230
at N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.Login() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs:line 76
at N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.SetupTest() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs:line 67
I am not sure what causing the issue. I checked the Credentials, Windows Identity during both the test run and there is no difference. Please advise !!
Thanks,
Deepak

Hi Tina,
Thanks for your reply.
I do have NUnit adapter installed. I even noticed that the test runs fine with NUnit GUI and also if I run it through Resharper Test Explorer window.
As you can see in the image above the same test is passed when I ran it from Resharper Unit Test Explorer window but fails when I ran it from Test Explorer window. I also captured the information on fiddler.
There was a significant difference in the Header Content length. Also under the User-Agent property the protocol versions are different.
Not sure why VSTest ExecutionEngine is picking a different version.
The UnitTest in question is calling a webservice method which in turn calls a method from another referenced project.
Web Service class
using System;
using System.Web.Services;
using N4S.Forms.OperationHandlerBroker.Server;
using NLog;
namespace N4S.Forms.OperationHandlerBroker.WebServiceServer
/// <summary>
/// The operaton-handler broker service.
/// </summary>
[WebService(Description = "The N4S Forms Operation-Handler Broker Web-Service.", Name = "OperationHandlerBrokerWebService",
Namespace = "N4S.Forms.OperationHandlerBroker.WebServiceServer")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
public class BrokerService : WebService
{ /// <summary>
/// Calls <see cref="HandleRequest"/>. Updates performance-counters.
/// </summary>
/// <param name="serializedInvokeRequestMessage">the binary-serialized <see cref="InvokeRequestMessage"/></param>
/// <returns>the binary-serialized response message</returns>
[WebMethod(BufferResponse = true, CacheDuration = 0, Description = "Invokes the requested operation-handler and returns a binary-serialized response-message.", EnableSession = false)]
public byte[] InvokeOperationHandler(byte[] serializedInvokeRequestMessage)
logger.Trace(Strings.TraceMethodEntered);
PerformanceMonitor.RecordRequestStarted();
InvokeRequestMessage requestMessage = (InvokeRequestMessage) AMessage.DeserializeMessage(serializedInvokeRequestMessage);
InvokeResponseMessage responseMessage;
try
responseMessage = HandleRequest(requestMessage);
PerformanceMonitor.RecordSuccessfulRequest();
catch (Exception)
PerformanceMonitor.RecordFailedRequest();
throw;
finally
PerformanceMonitor.RecordRequestEnded();
logger.Trace(Strings.TraceMethodExiting);
return AMessage.SerializeMessage(responseMessage);
UnitTest snippet
OperationHandlerBrokerWebService brokerService = new OperationHandlerBrokerWebService();
brokerService.UseDefaultCredentials = true;
byte[] serializedResponseMessage = brokerService.InvokeOperationHandler(serializedRequestMessage);
Please advise.
Thanks,
Deepak

SSIS package works in development environment but fails when job scheduler executes, file path invalid

SIS package works in development environment but fails when job scheduler executes, file path invalid
Relatively simple package to get OLE-DB connection to MS FoxPro 9.0 DB
The failure in the job log states that the path is invalid its a network path (\\192.168.1.xxx\foldername) this has been run several ways with the remote computer being mapped as a network drive and through the \\ notation described above.
Thinking it was a security issue between the SQL agent account and my account I tested by subsitution myself as a proxy account for the agent when running this job, again same result failed on network path.
One issue I see is that the remote computer is running Server 2000 (legacy software incompatable with newer versions)
Is it possible that this is a security issue, since if i understand correctly the current MS domain security model didn't exist until Server 2003.

Hi REIData,
Have you got the issue resolved? Based on your description, please make sure the target folder is shared properly. If the computer on which the SQL Server Agent job runs doesn’t join the domain as the server that hosts the shared folder, you have to share
the folder with everyone by adding “Everyone” to the people list on the File Sharing page of the folder and assign "Read/Write" permission to it.
Regards,
Mike Yin
TechNet Community Support

Applet works in JDeveloper, but not when deployed to OC4J

I am working on an applet version of the BI Beans java client application. It works fine when running in JDeveloper (applet viewer), but fails when deployed to OC4J. The applet shows a red X, with a message in the status bar saying "Loading Java Applet Failed...". Contents of java console are as follows:
java.lang.NoClassDefFoundError: oracle/dss/selection/step/Step
     at java.lang.Class.getDeclaredConstructors0(Native Method)
     at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
     at java.lang.Class.getConstructor0(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Any one have any ideas how to chase this one down?
Here is the message that JDeveloper shows when it runs the applet. I have gone thru this and ensured that all these references are selected in my .deploy settings:
C:\JDeveloper\jdk\bin\javaw.exe -ojvm -Xbootclasspath/a:C:\dev\jdev\Workspace1\TestClientApp\classes;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\biaddinsrt.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\biamlocal.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bicmn.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bidataclt.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bidatacmn.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bidatasvr.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\biext.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bipres.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bidata-nls.zip;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bipres-nls.zip;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bicmn-nls.zip;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\biaddins-nls.zip;
C:\JDeveloper\jdev\lib\ext\..\..\..\jlib\LW_PfjBean.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\jlib\share.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\jlib\jewt4.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\jlib\jewt4-nls.jar;
C:\JDeveloper\jdev\lib\ext\..\..\infobus\lib\infobus.jar;
C:\JDeveloper\BC4J\lib\bc4jmt.jar;C:\JDeveloper\BC4J\lib\collections.jar;
C:\JDeveloper\BC4J\lib\bc4jct.jar;
C:\JDeveloper\lib\xmlparserv2.jar;
C:\JDeveloper\jlib\jdev-cm.jar;
C:\JDeveloper\j2ee\home\lib\jndi.jar;
C:\JDeveloper\jlib\regexp.jar;
C:\JDeveloper\jlib\share.jar;
C:\JDeveloper\jlib\uix2.jar;
C:\JDeveloper\jdbc\lib\classes12.jar;
C:\JDeveloper\jdbc\lib\nls_charset12.jar;
C:\JDeveloper\j2ee\home\lib\ojsp.jar;
C:\JDeveloper\j2ee\home\jsp\lib\taglib\ojsputil.jar;
C:\JDeveloper\j2ee\home\oc4j.jar;
C:\JDeveloper\j2ee\home\lib\servlet.jar;
C:\JDeveloper\jdev\lib\ojc.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\olap_api_92.jar;
C:\JDeveloper\jdev\lib\jdev-rt.jar;
C:\JDeveloper\BC4J\lib\bc4jhtml.jar;
C:\JDeveloper\BC4J\lib\datatags.jar;
C:\JDeveloper\BC4J\lib\bc4juixtags.jar;
C:\JDeveloper\BC4J\lib\bc4j_jclient_common.jar
Any assistance would be appreciated.
s.l.

i have the same problem
i cant load my applet on OC4J , i am wondering know how Oracle canot solve this problem

Wifi works at home but not when away from home

My Wifi works at home but not when away from home, what is wrong? I thought with a phone plan I didn't need to have a wifi connection.

You either need WiFi or Cellular (or both). If you have neither, you can't connect to the internet.
Most people use WiFi at home and Cellular while away from home, or connect to public WiFi networks where there are some.

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

BAPI works in test but not in production

3rd party software uses BAPI to input data into SAP. This works in test but not in production. We have checked that user 3rd party software uses have same rights in both systems. BAPI is standard SAP BAPI. We can connect to production with SM59.
Is there anything in SAP that could cause this?

No. Better you check with the PATCH Levels.. etc to know is there any changes in the BAPI (BASIS people can help you) > Otherwise go to SYSTEM in the MENUBAR> STATUS--> Compare the Status there
After that check the data once...
Reward if helpful...

Hi, well i just got my mac book pro, and it worked perfectly yesterday but then when i opened it today to go on FaceTime, my picture/video was dark and red ! how do i get it back to normal?

hi, well i just got my mac book pro, and it worked perfectly yesterday but then when i opened it today to go on FaceTime, my picture/video was dark and red ! how do i get it back to normal? there is a green light next to the camera when im on photobooth/facetime,...

Just do a restart. It seems to clear it up.

My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera.

My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera. I plan on replacing this phone with an iphone 5s when it comes out but I need this phone to work until then.

When you did the restore, did you restore from a backup or restore as new? The final step of user troubleshooting is to restore as a new device, not from a backup. If you restore as a new device and the camera still does not function, it is probably a hardware issue. Make an appointment at the Apple Store Genius Bar and have the device checked by a Genius.

When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

Hi Willy,
Welcome to Apple Support Communities.
The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
Resolve iOS update and restore errors
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
I hope this helps,
-Jason

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

Hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me

hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me

Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.

Illustrator CS6 says "installation failed" when installing.

Illustrator CS6 says "installation failed" when installing. No explanation is given. I don't have any previous versions of AI installed or any trials. Help? I really need to use this product today!

We can't know. You need to provide system information and possibly the install logs:
Troubleshoot with install logs
Mylenium

Air project works in test but fails when installed.

Similar Messages

Maybe you are looking for