AirPort Access over Internet via iCloud

Hey there,
i figured out that i'm not able to connect to my remote AirPort device using AirPort Utility.
Doesn't iCloud support this feature? Do I need to confirue something else to get it work?
kind regards
Andreas

Try here > AirPort Express frequently asked questions (FAQ)
Press Command + F. Type in remote

Similar Messages

Share Airport Disk over WAN via iCloud

Does anyone have info on how 7.6.1 allows WAN access via an iCloud account? Supposedly that was a new feature and I can't find anything about it.
Sorry for everyone's frustrations. My 7.6.1 update went fine on two Extremes & an Express. 7.5.2 was the one that gave me fits last year.

I understand now about the IP address but every address that makes a direct connection to the Internet must be unique so I don't understand how you and your neighbour can have the same IP address. You may be on the same subnet, first three groups of number in IP the same, but it is impossible to have the exact same address otherwise the Internet would be broken for both of you. Are you sure the last group of numbers is not different? In the following sequence the number represented by DDD should be different between you and your neighbour.
AAA.BBB.CCC.DDD <-- DDD must be different
Anyway, it appears that things are mostly working. If you can access the Airport base station to configure it remotely then you should also be able to access the hard drive remotely.
When you are at a remote location does the name of your Airport Base station stay on the Finder sidebar? If it does what happens when you click on it to select it? If your AirPort disks are protected by a password it should ask you for your password and then the disk should become available.

I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8) and Tme Capsule(7.5.2). Browser is Safari 5.1.
When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
Thanks.

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

HT1222 Since downloading the IOS7 I can't access the internet via a wifi. I would like to remove it, is it possible? I have the ipad2

Since downloading the IOS7 I can't access the internet via a wifi. I would like to remove it, is it possible? I have the ipad2

Sorry, no. Apple does not support downgrading.
Have you tried to go into your settings, reset, reset network settings? It'll erase your current network from your iPad and let you start over.

I cannot access the internet via wifi on my time capsule.

I cannot access the internet via wifi on my time capsule even thought it was shown that I am connected to the time capsule with full wifi on my iMac. I use to be able access the internet via wifi on the TC. However, after playing around with the airport utility on my iPad I was no longer able to access the internet via the wifi on myTC. How can I fix this problem?

Did your TC recently upgrade firmware to 7.6.3?
I recommend you do a full factory reset.. and redo the setup.
Use different names.. SMB type.. ie short, no spaces. pure alphanumeric for everything.
Use only WPA2 Personal security.
If that doesn't work, give more info.
Age of the TC.. model number.. A1xxx from the base.
Firmware revision.
In the computer are you getting the correct IP and router and dns values? Please post a screen shot.

I CANNOT ACCESS THE INTERNET VIA MOZILLA FIREFOX. BOX COMES UP AS FOLLOWS:-

I CANNOT ACCESS THE INTERNET VIA MOZILLA FIREFOX
A BOX COMES UP WITH THE FOLLOWING:-
firefox-exe - Entry Point Not Found The procedure Entry Point
could not be located in the dynamic link library mozsqlite-3-all.
PLUS
When I access the internet via my server (Tiscali now Talk-Talk)
I have to enlarge each page. this is not now automatic.
What on earth has happened?
Please Help.
Thank you.

You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I just bought a brand new iPhone 5s and a huge problem is that when i try to sync my music to my iPhone 5s, under the music tab it says that i can only access my music via iCloud. is there anyway to sync your music from your computer?????

I just bought a brand new iPhone 5s and a huge problem is that when i try to sync my music to my iPhone 5s, under the music tab it says that i can only access my music via iCloud. is there anyway to sync your music from your computer?????

The ! sign before the song means that the actual song is no longer on your computer and/or iTunes library.

Is it possible to access text messages via iCloud?

Is it possible to access text messages via iCloud?

No, except to restore an iCloud backup to recover text messages and other data.

I cleared a playlist on my iPhone 4 because I wanted to remove the songs from my phone's storage (I had previously downloaded them) because I wanted to clear storage space. I now want to access the playlist via iCloud and can't. Thoughts?

I cleared a playlist on my iPhone 4 because I wanted to remove the songs from my phone's storage (I had previously downloaded them) because I wanted to clear storage space. I now want to access the playlist via iCloud and can't. In other words, I want it to sync with the playlist as it exists in iTunes Match. Thoughts?

Export Photos and Videos from Camera Roll to your computer.
Empty Camera Roll.
Make a Folder/Album with all photos and videos you want to have in your iPhone and sync them through iTunes.
This will free up space in your iPhone and your iCloud.
The backup of Camera Roll in iCloud is only to restore your iPhone. You can't access them directly.

Database access over INTERNET

I have a database on a machine on the INTERNET (say MAC1).
I also have a LAN setup, wherein we access the internet via a proxy server.
I can ping MAC1 from the proxy server on my LAN but as I cannot ping MAC1 from any other machine in the LAN, and hence I am unable to create Net8 connection, and hence could not connect to the server.
Looking for a way around.
Advice..................

The most obvious solution is open a port in the firewall, by default, that is 1521.
Have you considered using a VPN or SSH tunnel? (If your server is *NIX based.)

HT204406 Apple ID couldnt be created bacause of a server error, help!!!! I cannot access the internet via Ipod

After having to do a recovery with my Ipod I try to access the internet via the Ipod and the above mentioned Error is what I receive.

So I found out with alittle research that instead of entering all that info on my ipod, security questions, birthday, ect that it was much easier to just go to http://appleid.apple.com and place all that info there and save it than try the process on my ipod and it finished the update.

I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

Thanks for your note. My tech dept could not come up with any explanation for the dictation tool not working. We have about 1,000 employees in our office - I think I will send an all employee message to see if anyone else has the issue.

I have a first gen IPad 1..have been very happy until two weeks ago...everytime I try to access the internet via WIFI...it blows me off. I have tried 5-6 different WIFI spots...to be sure it was not mine at home...does the same thing everywhere...

Recently I have lost the ability to access the internet via WIFI with my I Pad one first generation. It blows me off every time I try. I have
tried 6 different WIFI spots to be sure it was not the WIFI at home. Just doesn't work?????

I spoke to several other Ipad 1 users who have identical problems...worked well since the original purchase then
recently....no WIFI.??????

Why can't I access the internet via ethernet port on my Airport Express?

I have an Airport Extreme base station and two Airport Express units. The Extreme is connected by ethernet to a BT Home Hub (BT is the internet provider). The network works for all the other computers that have Airport cards BUT I want to connect a Mac Mini (no airport card) by ethernet to the Express, but no matter how I try re-jigging the settings on the base station and Express, it won't connect. Mac Mini WILL connect when wired directly to the Extreme base station, so it's not the port. Also, I have been able to stream iTunes to the Express units so they are functioning in that respect. What am I doing wrong or not doing? Do I need to set up a WDS? Is there a bridging mode? Do I need to have a relay? Surely internet via the Express is possible!

The Airport Express units are the A1088 variety. The Extreme is A1354. Originally I set up the base station to create a network and got the Expresses to 'join network'. However, since that didn't work, I dug a little deeper and investigated WDS and bridge settings. The base station wireless mode is 'Create a network'. I selected 'allow this network to be extended' and made sure that the channel used was the same as the Express units. I have set up one Express to be a WDS remote and one to be a WDS relay on the same channel of the same network with the same password. I have specified the MAC address of the base as the main and the other MAC addresses in the appropriate places for the Expresses. I have tried selecting the 802.11b/g radio mode manually as well as in automatic. Access control is off for all units. I have tried the base station connection setting on 'Off (bridge mode)' and 'share a public IP address'. Am I just missing something?

My PC isn't accessing the internet via my Time Capsule.

I just got the new AirPort Time Capsule 3TB with 802.11ac WiFi and set it up. My iMac and my iPhones and my PC laptop are all connecting to the network just fine; however, the PC (a Toshiba Sattelite running Windows Vista) is the only device unable to access the internet.
I've been on the phone with Apple Support and MicroSoft Windows support, and neither has an answer. I have tried several things that have been posted on other discussion threads on this issue. None of those has worked for me, and the previous discussions on this issue (that I've found) have all originated from before the current TC model and before the current firmware version (7.1.1).
My iMac is running OSX 10.9 (Mavericks).
I am currently using all one-word alphanumeric names for my networks (I checked the 5Ghz box to make that a separate network, and I also have the Guest network set up).
I am currently using 10-character passwords.
I am currently using WPA2 Personal network security.
I am currently connecting using DHCP (and the PC is DHCP enabled), and the router mode is DHCP and NAT.
I am currently using fixed channels for both networks, and I have tried several different channels.
I ran the following diagnostics on the PC Command Prompt:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\user>
C:\Users\user>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : user-PC
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : hsd1.wa.comcast.net.
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . : hsd1.wa.comcast.net.
   Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter
   Physical Address. . . . . . . . . : 00-21-63-5A-9C-07
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2601:8:b700:84d:9c97:bc23:1cc3:b795(Prefe
rred)
   Temporary IPv6 Address. . . . . . : 2601:8:b700:84d:21b7:cc6b:3e70:8e25(Prefe
rred)
   Link-local IPv6 Address . . . . . : fe80::9c97:bc23:1cc3:b795%11(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.0.1.3(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Sunday, October 27, 2013 6:33:11 AM
   Lease Expires . . . . . . . . . . : Monday, October 28, 2013 6:54:09 AM
   Default Gateway . . . . . . . . . : fe80::9272:40ff:fe08:1e6c%11
                                       10.0.1.1
   DHCP Server . . . . . . . . . . . : 10.0.1.1
   DHCPv6 IAID . . . . . . . . . . . : 285221219
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-10-47-D7-A5-00-1E-33-5F-2E-18
   DNS Servers . . . . . . . . . . . : 10.0.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Realtek RTL8102E Family PCI-E Fast Ethern
et NIC (NDIS 6.0)
   Physical Address. . . . . . . . . : 00-1E-33-5F-D5-60
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{BD700D70-4407-43E8-AA8B-DDA1E4D7C
854}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : hsd1.wa.comcast.net.
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 12:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
C:\Users\user>ping 8.8.8.8
Pinging 8.8.8.8 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Reply from 10.0.1.3: Destination host unreachable.
Ping statistics for 8.8.8.8:
    Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
C:\Users\user>ping 98.237.184.1
Pinging 98.237.184.1 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 10.0.1.3: Destination host unreachable.
Request timed out.
Ping statistics for 98.237.184.1:
    Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
C:\Users\user>
My thought is that it's either a case of the TC somehow blocking the PC from internet access, or else the PC not being able to make sense of the access information provided. The latter is the conclusion of Apple technical support, while Windows tech support concluded that I must have a defective router.
Any help will be much appreciated!

You can use the E1000 as wireless AP.
This is the method that will generally work with any wireless router. We term it Wan Bypass.. it is not an official method.. but works fine in vast majority of cases.
Leave your existing setup as is.. modem with TC plugged in.. keep the TC as the main router (at least I presume it is).
Let me work on real numbers as it is easier.. and you can adjust the setup according to your actual setup.
The TC has IP of 10.0.1.1 by default and dhcp passes IP from 2-200.
Plug the Linksys into a computer and setup the IP as 10.0.1.202 ... Please write this down as it will be hidden and if you forget it .. you will need to recover the Linksys by reset and start over.
Turn off the DHCP server in the Linksys. When you do this, and save the setting the computer will no longer be able to connect to the Linksys.. that is fine. Plug the Linksys now into the TC.. LAN port to LAN port. (Hence the name WAN BYPASS).
Back onto a computer connected as normal to the network.. access the Linksys at the address you just set.
Setup its wireless to have a different name to the TC and I would also recommend you fix its channel.. make it say 11. So the two routers don't fight each other.
Names should be short, no spaces and pure alphanumeric. Set up the wireless security as you normally do.
Remember this is wan bypass so plug LAN TC to LAN E1000.
If you run into issues.. post again.

AirPort Access over Internet via iCloud

Similar Messages

Maybe you are looking for