Airport card 1.2.1 does not work with Ibook G3 with OSx.4.2

I just purchased a brand new airport express base station. It seems to be up and running on my G4Imac just fine as a server.
For the client,
I have an ibook G3 and now have OSX.3.4 on it.
I installed my ancient Airport card- 1.2.1 into the Ibook.
I installed the new software from the new Airport base station.
I tried to install the old software from the Airport 1.2.1 card but dont have Classic- so would not install.
Now, the Ibook does not allow me to choose Airport in the Network Preferences section- does not seem to recognize there is a card installed. So, no way to connect to the base station.
My questions:
1.can OS X..3.4 recognize the old Airport 1.2.1?
2. Does the software from the new base station support the old card when used in the client?
3. Do I need different software for the card in the iBook other then the base station software? ie, is there card software that needs to be installed, and if so what is it in system X?
Im trying to figure out if I have a hardward problem- ie the card or slot is not working- or s software problem.
Can anyone help?

MacOS 10.3.x has all the software to use an Airport card already installed. All I would recommend you do is install the Airport 4.1 update provided at:
http://www.apple.com/support/downloads/airport41formacosx.html
The software that ships on the CD that came with the Airport Express is only used to configure an Airport Express. It doesn't provide any software updates for the MacOS itself, nor for the Airport card installed in that Mac.
First thing I suggest you do - run the System Profiler utility on your Mac. See if it identifies that an Airport card is installed. If it does not then recheck the installation of the card - ie pull out the card, then plug it in again and make sure it is fully seated into its socket. Remember to also attach the antenna cable to the card. If the System Profiler still fails to "see" the installed Airport card, then the card itself is likely defective.
[Side note: Airport 1.2.1 was the version of the Airport software required to provide software support for the card in ancient MacOS versions. Airport 1.2.1 is not actually installed on the Airport card itself, so if you install an original Airport card into another Mac it makes no difference what Airport version was installed on the Mac the card was pulled from.]

Similar Messages

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894)

HT201412 Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.

Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.Mute us not checked in general settings. Reboot (off/on) has not helped. Deleted apps and reloaded them. Did not help. Any other suggestions thank you

If you lose sound for games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

HT201272 i paid and downloaded Card Game ( UNO) is does not work

Uno card game off apps store does not work on my i-pad 4th generation

Have you tried deleting the apps and re-downloading it ? If that doesn't fix it then you could try contacting the app's developer (there should be a link on its description page in the store).
If you don't get a reply from the developer then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

WebGL does not work on Windows 8 with NVidia (650M) cards

Hi, I`m working on WIndows8-64 and NVidia 650M GPU.
I use FF 17.0.1.
WebGL does not work until I set "webgl.force-enabled=true".
Can this be fixed to work by default ?
Thanks

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.

Spotlight does not work on iphone 6 with ios 8.1.2

Since a few weeks the spotlight search does not work anymore on my iphone. I tried removing all subjects in the setiings menu and adding them again.

No, it should work with the iPad. It's not a matter of what version of iOS is on the device.
The card reader has never been compatible with any iPhone. It is compatible with iPads.
~Lyssa

The Create List Item workflow action does not work in document library with document template

My end goal is more complex but below is a basic example of the issue I’m having that just simply does not work.
I'm trying to use a site workflow to create an item in a document library that has a document template applied to it but the file that gets created by the workflow is corrupt and cannot be opened.
I created a document library and edited the document template by adding some text to the header and changing it to a Word docx file instead of a Word dotx file. I tested the document template by clicking the files tab in the ribbon and then clicking new
document which opens the document template in Word and allows me to edit and save the document back to SharePoint. Then I created a SharePoint 2013 site workflow in SharePoint Designer that contains a single Create List Item action, and that action creates
an item in the document library with the name field statically defined. I published the workflow and then manually start it on the site. The workflow completes successfully and when I navigate to the document library the document has been created by the workflow.
When I click on the document to open it in the Word Web App it throws the error pictured below and if I open it in the Word client application it just opens a blank document and not the correct document template.
I also tried using a SharePoint 2010 workflow with pretty much the same results. Opening the document in Word Web App gives the same error as above and opening the document in the Word client application gives the error pictured below.
Come on Microsoft creating a Word Document in a SharePoint Document Library from a SharePoint Workflow should just work! Is this a bug or does anyone have any ideas on what is causing the this issue?

I had the same problem with corrupted document - this worked for me:
1. Create a 2010 Workflow which creates the list element in a document library
(you may start this workflow from your 2013 workflow if applicable)
2. In the Create New List Item properties - make sure to set ContentTypeId to your content type
("Id for indholdstype" is Danish for "Contenttype ID")
3. Your Content Type template should be a ".docx" file - NOT a ".dotx" file...!
(I have always created my templates for content types as .dotx files - seems Microsoft wants us to use ordinary .docx files as template files for content types)
Hope this helps you!

"Search font .." does not work and CS2 crashes with every program shutdown ??

Since yesterday Indesign is showing some strange behaviour ...
At first I encountered that the "search font ..." dialogue does not work anymore, it just does not appear! It´s just as I wouldn´t have clicked anything ... That´s quite a prob for me, I really need this function, because I get a lot of documents with lots of fonts which I have to change. How can this function disappear??
Another strange thing: since the font changing function disappeared Indesign chrashes with everey program shutdown (I´m working on Windows Vista) and on the other hand it´s suspiciously quick when starting ...
Has anyone an idea how I can fix this?
Thanks!

Maybe good to know: I do not use more than one monitor. I have used the search font function before on the same day it was disappearing. I was working in a document with several hyperlinks imported from Word. as it happens.
Any suggestions? I really need help!

Auto-Detect Screen Resolution Does Not Work Across Multiple Monitors With Different Resolutions

Hi,
The Acrobat Pro DC (15.007.20033.2203) auto-detect screen resolution feature does not work with multiple monitors at different resolutions. Acrobat looks fine on my hidpi primary laptop display (Razr 14" 2014) but is completely unusable if I drag or extend the application to a standard HD resolution secondary monitor. Dragging Acrobat from my primary desktop display to the secondary display causes the UI elements to become 2x as large as they should be and makes Acrobat unusable.
Is there a way to make Acrobat auto-detect the display that it is currently on?
Thanks!
-Donald

To prevent it from happing again, you can
1. go to the Mouse preference and turn off the scroll zoom feature.
2. go to the Universal Access preference and disable the zoom features.

SCVMM 2012, Conntect via conosle does not work when logged in with specified credentials

Hi all
I have a problem with the SCVMM 2012 console. When I start the console I select the "Specify credentials" option and then I enter my admin credentials. Afterward the console opens
and everything works except the "Connect via Console" function.
When I try to connect to a VM I get the following message:
Virtual Machine Manager lost the connection to the virtual machine for one of the following reasons: Another connection was established to the console of this machine. The virtual machine has been shut down or put into the saved state. The user credentials
provided do not have the necessary privilege to connect (0x0003, 0x0300)
It seems that the Virtual Machine Viewer runs not under the admin credentials which I enter at the beginning and therefore the console cannot connect.
Has someone the same issue ? Is it by design that the console connection does not work with specified credentials or is a sort of a bug or error ?
Thx
J0fe

Being new to SCVMM, I've just come across this issue myself, though I came to a different (not necessarily better, but good enough for me) resolution.
I have a somewhat convoluted but not abnormal configuration where the SCVMM server lives in a separate untrusted forest to that which the Hyper-V Server hosts live.
As people have noted in this and other threads, the VirtualMachineViewer.exe process launches in the same security context with which you logged onto your pc. While the VmmAdminUI.exe process also runs in the same security context,
the network logon it issues makes use of the credentials provided at the SCVMM MMC's logon screen, which VirtualMachineViewer.exe does not.
I elected to use Credential Manager to resolve this issue.
In Credential Manager, I created a "Windows Credential" entry where the hostname matched the FQDN of the hostname that appears within SCVMM as the virtual host entry. Using an IP does not match if you've used an FQDN in the SCVMM
registration, and vice versa. If you used an IP for the host in SCVMM, then you need to supply that IP as the hostname in Credential Manager, and likewise if you used a FQDN.
This solution isn't perfect as it requires you to manage numerous Credential Manager entries (one per host), but that still appealed to me far more than one per guest. If I had a larger environment, I'd script the account configuration
given it only needs to happen once per host, rather than on an ongoing basis of once per guest as some of the above approaches would require.
I haven't tested the different combinations to verify the least permissions required. For the time being I've gone with the model of using a non-privileged domain user account (to avoid managing multiple identities and passwords)
which I added to the local Administrators group of each Hyper-V Server host. This stuck me as being a sound enough compromise between rigid security and ease-of-administration (given the per host arrangement in Credential Manager).
With the account correctly specified in Credential Manager, I'm able to move on past the 0x0003 error and successfully use the remote function.
If I was to point out an upside to this, it would be that this approach would allow me to remote Hyper-V servers in untrusted forests (including workgroups), which is something I couldn't do if the VirtualMachineViewer.exe process
did in fact use my SCVMM credentials alone. Ultimately, that's something you have to come to terms with yourself, though.
Cheers,
Lain
Thanks a bunch Lain, this helped! I'd still consider this a bug, however, and not a workable solution for a large number of servers/admins... But for now this does the trick, thanks!

I just bought a Quantaray All-in-one card reader. It does not work with my Macbook OSX.

I just bought a Quantaray All-in-one card reader. My Macbook OSX does not seem to read it. I have tried attaching it with iphoto on both before and after attaching the card reader to the computer and also have tried another card. Directions say that a green light should come on to prove that connection has been made; I only get a red light. I am Europe with no help and am desperate. Can anyone out there please help? Thanks.

There is no way to use the Thunderbolt display with a computer that has no Thunderbolt port.
Swap the display for the Mini DisplayPort version
<http://store.apple.com/us/product/MC007LL/A/apple-led-cinema-display-(27%22-flat -panel)>
The price is the same.

Satellite M30-951 graphic card or video BIOS does not work properly

On the BIOS and boot pages strange characters occur (screenshot www.audioberlin.com/M30-951_SCREEN.jpg).
XP boots up but the elements displayed freeze and the display becomes black for a second. The system becomes slow and does not react any longer.
Maybe these symptoms started after having tried to watch a movie which was not encoded correctly but I am not sure.
I already tried different video drivers (Nvidia FX GO5200), changed the BIOS from 1.7 to 1.6 and back again and reinstalled XP Pro. I also substituted the RAM. Nothing changes :(
Could a broken video bios be the problem? And how could this problem be solved?

Hi buddy,
no, its not a broken videobios. Your graphicscard is defective and thats a 100% fact. My girlfriend had an M30-244 and the same error occurred with her machine.
At this time she had warranty on her machine, and they replaced the Mainboard of the machine.
After the replacement everything was fine again. So if you have still warranty on your Rig then give it to repair; otherwise you can give the machine to ebay. :)
Sorry dude, but thats a not very nice fact, which I can tell you.
Greets

Connection to external display does not work under windows bootcamp, with a thunderbolt to vga adapter.

Hello guys, after searching a lot in the forum for an answer to this, I could not find a solution so this is the reason for this post.
I have a Macbook Pro (early 2011 I think) running MacOSX Lion and I have installed Windows 7 64-bit through bootcamp (version 4.0).
Everything works fine except that I cannot connect my external display through my thunderbolt-vga adapter.
The external monitor shows only the boot screen of windows (the one with the windows logo) and then, when I get into the login page it goes blank.
After reading the forum, I have done several things in order to fix this problem such as:
Restarting the macbook with the thunderbolt device connected to it.
Updated to the latest ATI drivers through bootcamp.
Removed the graphics driver and re-install it again.
I have tried to identify the external monitor through windows 'screen resolution' tool (attached photo).
but still no luck.
Does anyone have any idea on what else I could do in order to fix this? By the way, I find it very frustrating that Apple does not have a stable solution to the problem with devices that are connected to the thunderbolt port.
Thank you in advance

and here is the attached screenshot

Microphone on Macbook pro does not work in windows 7 with parallels

I recently purchased a Macbook pro with retina display, and installed windows 7 on the macbook with parallels desktop 7. I found out my microphone was not working correctly inside windows, I did bought my laptop to Apple store, at first we thought it was the microphone problem and exchanged me a new laptop, but the issue still exits, so I bought the laptop back to Apple store, this time we find out it seems like the microphone only not working under the windows, it works just fine in Mac part.
Apple direct me to windows telling me that I might need to install a device or driver only windows can provide; then when I contacted window, Windows told me I need to contact apple because the device or deriver must provided by the manufacture of the PC. Both side still direct me back to each other, so I still don't know what deriver or device I needed..........
When I pull up the device manager inside windows, the only device listed under sound is "Parallels Audio Controller (x64)"
Another thing is, the microphone still works inside windows 7, it's just not working correctly. For an example, if I'm doing a live chatting with my friends inside windows, I can hear my friends and they can hear me too, but they cannot hear me very clearly, it seems like there are some kind of negative feedback, it seems like there's an electronic vibrate in my voice.
Can someone please help me
Thank you

Post on the Parallels forums: http://forums.parallels.com

HP 932C PRINTER DOES NOT WORK OVER A NETWORK WITH TWO DIFFERENT OPERATIONAL SYSTEMS.

I have a 932c HP printer connected via USB to a Windows XP desktop computer (Dell E520), which is part of a home network.
I also have an HP Pavilion dv5 notebook, running Windows Vista Home Premium 64-bit, connected to the same network. This notebook can find the printer over the network. However, when I try to capture the 932c printer, the following dialog box appears:
"The server for the `hp deskjet 930c series` printer does not have the correct printer driver installed. If you want to search for the proper driver, click OK. Otherwise, click Cancel and contact your network administrator or original equipmente manufacturer for the correct printer driver."
When I click OK, another dialog box appears:
"The file `*.INF`on (Unknown) is needed. Type the path where the file is located, and then click OK."
However, I can't find any workable *.inf file in the HP notebook Hard drive (both partitions).
I have already tried to download the driver from the HP website, but it says that Windows Vista already has the driver for such printer! Well, now I'm stucked!
I'd like to point out that the printer works fine if I plug it directly to the HP notebook's USB port. But I want to operate the printer via the home network, keeping it hooked to the Windows XP desktop computer.
How to solve this problem? Thanks.

This is the HP notebook forums. I would recommend posting this in the printer forums for better coverage.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Airport card 1.2.1 does not work with Ibook G3 with OSx.4.2

Similar Messages

Maybe you are looking for