Airport time capsule and usb external drives

Just purchased airport time capsule. Questions about using external drives through the usb port on the airport.
- If I am using a powered USB hub should I be able to connect multiple drives?
- Is there a performance/speed difference between going through the usb port on the airport vs. usb hub to the usb slot on the Powerbook
- When I thried one of my external drives it did not display on the desxtop. Instead it was a "folder" in the Airport Time Cabsule. Is this normal?
Thanks

If I am using a powered USB hub should I be able to connect multiple drives?
Yes, if the drives are formatted correctly in Mac OS Extended (Journaled) or FAT 16/32.
Is there a performance/speed difference between going through the usb port on the airport vs. usb hub to the usb slot on the Powerbook
Yes. The USB port on your Mac is probably twice as fast as the port on the AirPort.
When I thried one of my external drives it did not display on the desxtop. Instead it was a "folder" in the Airport Time Cabsule. Is this normal?
Yes. The drive connected to the Time Capsule is a shared network drive. Only drives that connect to your Mac directly via USB or FireWire will appear by default on the desktop. If you try to use Disk Utility with a network drive.....you will not see the drive.

Similar Messages

Using AirPort Time Capsule as an external drive with access to files by guest account

Is it possible to use my AirPort Time Capsule as an external drive with access to files by a guest account?
I would like to store a large number of folders containg photographs on my AirPort Time Capsule and allow anyone with a password to access the photographs - at the time of viewing the Time Capsule would be connected to the internet but I wouldn't want users to actually access anything other than the files on the Time Capsule - is this possible? if so any help in configuring it would be really helpful.

No it is not possible.. Guest is just that.. a guest that is allowed permission to access the internet but none of the local files.
To give a person access to the TC they must have password to access your normal network..
From there it is up to you how you do this.. people cannot actually access files on your computers unless you give them share and password permissions for that.. you can even setup accounts on the TC although I recommend against it.. if you want shared photos anyway. All security on a TC is illusion.. merely pressing the reset and it is all blown away.. so if you are concerned about security don't put stuff on the TC people should not access.. or like your TM backups ensure they are encrypted.
A person can then access you TC and the photos.. but what else on the network??

Backup a dual boot iMac with OSX + Vista to Time capsule and USB hard drive

I have just bought a Time Capsule which is now working as my WiFi Network base station and backs up an iMac and a Macbook. The iMac has both OSX and Vista (using Boot Camp) and I was using a USB Hard Drive that has 2 partitions (HFS+ for the Mac; NTFS for Vista) to back up the iMac. Rather than leave this attached to the iMac just to back up the Vista partition I would like to move it to the Time Capsule's USB port and use it as NAS. The idea being that it becomes a NAS with one partition used to back up the Windows data when I run the iMac with Vista and the other partition to archive the Time Machine backups from both the iMac and Macbook. I tried to connect it as it was but got an error and reading the forum it seems that it won't work unless both partitions are HFS+ or FAT. If I reformat the NTFS partition to HFS+ will I be able to use the built in backup function of Vista to back up the Vista partition to the USB hard drive? I read somewhere else that Time Capsule takes care of the formatting for an external NAS drive and Windows will be able to read and write to it even though it's not NTFS. Any ideas comments appreciated.

This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
As far as mounting the TC..
In finder use Go, Connect to server.. and type.
AFP://TCname or TCipaddress
Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
Fred Blog's Time Capsule 2445566.
It is too long.. it has spaces and it has non-alphanumeric characters.
Shorten it to FredTC
No spaces no characters that are NOT alphanumeric.
TCIPaddress is simply the standard IP.
You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

How can i use the airport time capsule as a external hard drive?

how can i use the airport time capsule as a external hard drive?

Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

Accessing Time Capsule and linked external hard drive from other devices and copying to these drives

Hi
Please be gentle. I am not that technically able :-)
I have managed to set up my time capsule. Router working, external hard drive linked, time machine back ups working...
The last thing I am looking to do is to access files on my time capsule and also external hard drive (linked to it), from Mac, Iphones, Ipads, Apple TV, Windows laptops X2. Am I able to do that? Have read so many discussions but dont get the answer. Please be gentle :-)
Regards
Tommy

The last thing I am looking to do is to access files on my time capsule and also external hard drive (linked to it), from Mac
This should be automatic.. find the TC disk under shared in finder.. double click it and see under the data folder.. you can create new folders in there.
Note using the TC for data and TM backups is not the greatest of ideas.. please read pondini.
Q3 here. http://pondini.org/TM/Time_Capsule.html
The external drive is fine though..
Now it can have loads of issues if you run Mavericks.. so if you have trouble.. do not be surprised.. if you run Mavericks.. be surprised if it works without trouble.
Iphones, Ipads
iOS devices are not file based.. they are not intended to be used with a file device like TC and will neither backup to it nor open files from it.. of course what apple wants and what users want are different things so there are plenty of file apps to help you read and write files.
Filebrowser is the major one.
http://www.stratospherix.com/products/filebrowser/
You still cannot backup though.. iOS uses itunes to backup or icloud.
Apple TV
There is nothing you can do with AppleTV.. it is not a file device at all.. it is not even a media player.. it is a streamer. (Early model Gen1 and Gen2 can be jailbreak.. so they do actually have media player ability) Gen3 is tied to its mother's (iTunes) skirts with steel cables.. no JB.. no use really. If you want to play movies from a TC buy a WD Live TV.. it is a player.. !!
Windows laptops X2
You can access the TC from windows..
1. Make sure the TC naming complies with windows networking.. to put that simply.. all names should be short, no spaces and pure alphanumeric. Apple wizard will recommend a name for the TC, like
Fred Blog's Airport Time Capsule.. this is wrong on so many levels.
It will be a total pain on windows.. use FBATC or TC or anything you like.. as long as it follows the rules..
Short 2-20 characters.. less than 10 is better.
No spaces.
Pure alphanumeric.
All names must comply.. TC name and wireless name/s
2. Load the airport utility for windows into the computer.. you can download for up to win7.. apple haven't bothered with windows since then and are pretty out of date. The win7 utility will load on win8 with the usual voodoo and astrological help.
3. Windows must be set to home for location.. if you cannot open a command window and ping the TC by ip and name, then pull down the firewalls.
4. In windows explorer type into the address bar directly.
\\TCname or \\TCIPaddress (using, of course, the real name or real IP).

Backing up Mac HD with Time Capsule AND an external hard drive

I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
Thanks.

Rheopaipo wrote:
I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
I don't think it's possible to configure Time Machine to back up to two locations without modifying its settings frequently.
You might consider using that external drive to hold a bootable backup. You can create such a thing with either of the utilities SuperDuper! or Carbon Copy Cloner. If you pay the registration fee for SuperDuper! (~US$28), there's a mode where it will back up only what has changed, which makes the backup operation run quicker. (Carbon Copy Cloner may offer a similar feature.)

Is their another way like to use my time capsule as an external drive not using time machine?thanks

is their another way like to use my time capsule as an external drive not using time machine?thanks

You do not have to use Time Machine.. but the TC is hardly suitable for a NAS.. it has no means to back itself up and is relatively slow. Still that is up to you..
CCC or Superduper are good backup softwares .. and there are a number of others.

I have just bought an airport time capsule and im trying to install an airport utility. I tried the 6 version but it wd not load because it said might mac would not support. I then tried the 5.6.1. and it said it would not work with airport capsule.

I have just bought an airport time capsule and i am trying to install an airport utility programme to support this
However, it seems the version 6 which came out last year - i can't use on my Mac - Snow Leopard -
So tried to then install version 5.6.1 and although this installed properly, it says this will not support my capsule
2. I have BT home hub 2. I presume I cannot bypass this as the internet router? I bought the time capsule for its capability to back up . The router was a byproduct. But am I correct in thinking that it acts as a secondary router or a booster rather than a primary router . I still need the BT homehub?
if anyone can help that would be great
CS J

You should either return the Time Capsule or upgrade your Mac at least to OS X 10.7.

I am setting up new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resetting and unplugging. How do I fix this?

I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets

I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Using Airport Time Capsule with an external usb hard drive - how to connect

I have 2TB Airport Time capsule which is connected to my iMac by an ethernet cable and which I use for T.Machine backups - No problems here.
I have an old MacBook Pro running 10.6.8 and which is also connected to my T/C via wi-fi - again no problems.
But I understand I can use an external hard drive via usb cable connected via a powered hub, to the T/Capsule and which I wish to do certain backups from my MBP (I have no wish to update the MBP as it runs certain apps no longer available on the iMac (10.9.2)
Now the problem I have is trying to set it up, the MBP has Airport Utility 5.6.1 and I can’t continue as it says I need a newer version. As I see it, the newer version doesn’t work on the MBP only the iMac.
A catch 22 situation. If I continue and and go to “manual setup” then try update, all I get is “correct the problem before updating” (Allow setup over the internet using Bonjour).
Anyone have any ideas or images that I can view to try and get things going?
I should add that I wish to use my external hard drive not as a time machine backup but only for certain items using say, Super Duper, but am unable to get the disk to mount on the MBP
Alan

I still can't use it the way I was hoping because it then becomes a T/M back-up disk and not a normal usb/firewire disc.
You are first mounting the drive on the desktop, correct?
Not sure what you mean here.
You can drag/drop files normally or copy/paste files to the drive icon on the desktop, just as you would a normal drive that is displayed on the desktop.
Or, double click the drive icon on the desktop and drag/drop files into the open window there.
Tell us the steps that you are using to mount the drive on the desktop. What happens after each step?

Airport Time Capsule and external hard drive issue

I have an external hard drive connected to my 3TB airport time capsule. It no longer shows up in the finder sidebar on my iMac, which is connected via ethernet. It does appear on my Macbook Pro, connected via Wi Fi. It worked normally when first set up. I no longer have a way to drag files from my iMack to the hard drive so I can share them with my MacBook Pro. I am running Mavericks.

This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
As far as mounting the TC..
In finder use Go, Connect to server.. and type.
AFP://TCname or TCipaddress
Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
Fred Blog's Time Capsule 2445566.
It is too long.. it has spaces and it has non-alphanumeric characters.
Shorten it to FredTC
No spaces no characters that are NOT alphanumeric.
TCIPaddress is simply the standard IP.
You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

Is there a way to use spare space on Airport Time Capsule as normal external hard drive?

A friend uses a hard drive with Time Machine for backup, but also has need for an external hard drive to hold a large number of photos that are filling up her computer's hard drive. Hers isn't an Airport Time Capsule but I have one that is. So that raised a two part question:
1. Can her external drive used with Time Machine somehow also be used to store many of her photos (sort of a second iPhoto library) to let her to offload them?
2. Can an Airport Time Capsule be used that way? (Mine is 2 TB but my hard drive is 500 GB.)
Just curious. Thanks.

Can her external drive used with Time Machine somehow also be used to store many of her photos (sort of a second iPhoto library) to let her to offload them?
Not sure if I understand.
To keep things simple, let's just say she has an image library on her Mac it might be iPhoto or another library.
Time Machine is backing up the image library to the external hard drive. So, the "original" version of the image library is on her Mac, and Time Machine is making a backup copy on the external hard drive.
If you move the image library to the external drive....Time Machine has nothing to back up....and the only copy of the image library will be on the external hard drive.
If the external drive has a problem.....she has lost all of her images since there are no other copies of the image library on another drive.
Is this what you are asking about? Do you see the danger here?
Can an Airport Time Capsule be used that way? (Mine is 2 TB but my hard drive is 500 GB.)
Yes it could, but the same dangers would apply.
Or, maybe I am not understanding what you are asking?

HT1331 How to connect external hard disk to airport time capsule and use it throughmy ipad ?

I Have connected an external usb hard disk to airport time capsule. pleasea help me to configure it from my ipad and use it from my ipad.

You need the disk formatted HFS+ on a Mac.. you cannot format disks from the airport utility and there is no hard disk utility of course on ipad.
Once you set it to share.. then you need to load a file app to the ipad as it has no ability to natively handle files.. check out filebrowser as a standard one.. but there are several available.

How to handle upgrading a time capsule with an external drive?

My Time Capsule recently filled up. I have 2 computers I'm backing up - a Mac Pro and a MacBook Pro. I purchased a larger external hard drive and connected it to the Time Capsule, and it appears to be backing up the Mac Pro just fine. I was thinking that it might be useful to have the MacBook Pro back up to the older smaller drive, since its drive is smaller than the Mac Pro's. So my question is - now that the Mac Pro is completely backed up on the new drive, can I just get rid of the old back-ups on the smaller drive and start backing up the MacBook Pro to it? I don't have a lot of need to find old files or go back to older revisions at this point. I'm mainly concerned with catastrophic failure (as recently happened), so as long as I have the latest backup, and can restore from it, I'm happy with that.
I'm curious what others do when they add a new drive after one fills up? I'd like to be able to continue to use the older drive, since it appears to still be good, but unless I delete the old backups, it looks like Time Machine won't make much use out of it.

That is correct procedure.. if the TC is older than 3years.. begin to be suspicious of the TC's continued longevity.. they do become unreliable and hard disks do not last forever,, especially if it is older one, running in an oven effectively all its life.
What model TC do you have? A1xxx model number from the base please.. molded into the rubber rather than on the label where it should be.
If it is gen1 or gen2 both power supply and hard disk is already well past the useby date. Consider a replacement or using USB drive so you are not caught with the backup gone when it fails.. although it usually isn't bad.. if you only have backups on the TC. It is people trying to use them as a NAS who really hit the brick wall.

Airport time capsule and usb external drives

Similar Messages

Maybe you are looking for