I am setting up new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resetting and unplugging. How do I fix this?

I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets

Similar Messages

Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

HT1178 Setting Up new AirPort Time Capsule

im setting up airport time capsule for the first time and its asking me to "Provide the PPPoE connection information from your ISP" Im not sure what to do? Where do i get this information?

PPPoE connection information consists of your user name....likely your email address....and password for your Internet Service Provider (ISP).
If you do not know this, then you will need to contact your ISP for the required information.

HT203167 OK, so I bought a brand new macbook pro since my last one broke. Now my itunes library isn't playing my songs all the way through. How do I fix this ?

ON my new Macbnookpro 2 days old, how do I obtain my itunes purchses in full ???
My old macpro is broken, do I need to somehow make my new macpro my main computer ?
The song are ALL Cut in half i can;r listen to anything I purchased ?
How do I fix this ?
Thanks
Patrick

AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad

I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time...
Thanks for any help.

I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
Are you talking about files you are hosting on the TC?? Not Time Machine backups??
Can you tell me exactly how you are accessing the TC.. please do a test..
Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
Do the same test from the same computer with wireless turned off running ethernet.
Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
eg
Now do the test from the HP laptop and give me the results from that.
Is the issue wireless only.. ??
Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
About Wireless Diagnostics

I'm trying to open itunes and keep getting an error message that i'm missing a file, MSVCR80.dll. How do I fix this? I've tried uninstalling and re-installing itunes several times.

I am trying to open itunes on my computer. Windows 7 64-bit operating system. When I try to open itunes, I get an error message saying MSVCR80.dll file is missing. Where can I find this file and how can I get it on my computer? I have tried uninstalling and reinstalling itunes several times. Thanks for any help.

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

I set up a new airport time capsule. Most devices work fine however now my apple tv 2nd gen won't work.

I set up a new airport time capsule. Most devices connected fine however now my apple tv 2nd gen won't work. I turn it on and it searches for time and date but goes no further. I can't by pass it either. Any suggestions?

I can't by pass it either. Any suggestions?
Does that mean you cannot move it to the TC and plug in by ethernet? What does bypass mean?
I would still move it closer to the TC.. and just trial it there. Range on some AC models for 2.4ghz is worse than old one. For some people.
Another thing to try is fixed wireless channels.. one of the very few options still available in the AC model.. lock the 2.4ghz to 11, 6, 1 .. try it in that order.

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Problem setting up an AirPort Time Capsule

I am trying to link a new AirPort Time Capsule (2TB) to my iMac and MacBook Pro.
While the machines 'recognise' the AirPort, neither can connect to it as the AirPort is not connecting to the WiFi.
Do I need to link the AirPort to the modem directly (by ethernet cable) to set it up initially?
If yes, can I then disconnect the AirPort form the modem and move it to another room where I want to use it?
Thank you.

Do I need to link the AirPort to the modem directly (by ethernet cable) to set it up initially?
The Time Capsule needs to stay connected to the modem using an Ethernet cable at all times. Please refer to the illustration in your Setup Guide for the Time Capsule.
Ethernet cabling can be run 330 feet, or 100 meters, with virtually no signal loss, so you should be able to locate the Time Capsule just about anywhere that you want.

Can I use my new airport time capsule 3TB for my personal cloud

I am trying to get my own personal cloud. Can I use my new airport time capsule to accomplish this?

The Time Capsule stores data on its internal drive and not in the cloud. If you want it actually put in the cloud, it needs to be separately set up with a hosting or storage service.
(92923)

Will my MacBook Pro '11 support the software needed for my new AirPort Time Capsule?

I've got a MacBook Pro '11, OS X 10.6.8 and am trying to back up my photo library to a new AirPort Time Capsule 2TB.
When trying to set it up in AirPort Utility, I am getting the warning "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility."
1. Where do I go to get the latest version of AirPort Utility?
2. Will the latest version work with OS X 10.6.8?
Thanks for any help you can offer.

Yes. The latest version will be installed when you upgrade to Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite - System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

My computer is macbook white with iOS 10. 6.8, will i able to use the new Airport Time Capsule 2TB and what does it mean administrate the Airport Time Capsule 2TB ?

my computer is macbook white with Mac OS X (10. 6.8), will i able to use the new Airport Time Capsule 2TB and work properly with Time Capsule on my computer to back up wirelessly?
And what does it mean "to administrate" because it was written in requirement of the Airport Time Capsule 2TB ?

You must use a Mac running Lion (10.7.5), Mountain Lion or Mavericks to be able to set up the Time Capsule and make any changes to the settings.
A recent version iPhone or iPad could also be used for this task.
From the Specifications on the Time Capsule:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

Is the new AirPort Time Capsule compatible with a fibre optic modem?

I will be having fibre optic set up in my new home. The new AirPort Time Capsule states that it si able to connect to cable or DLS modem for internet access. Will I be able to connect this device to a modem designed for fibre optic internet?
Many thanks
CS

Yes. All it needs is a modem (cable, fiber, satellite, DSL) with an Ethernet output (not USB).

How to connect New Airport Time Capsule to non Apple asdl router

Guys,
I have just purchased a new AirPort Time Capsule to back up the various macs in my house. I want to connect it to my wireless router which is a non apple product but the setup instructions are a little unclear to me.
My current router has simply a phone line connector and the power source coming into it. Do I simply connect an ethernet cable from the Airport to the Router. And if so, do I use the single Ethernet WAN port or one of the three Ethernet LAN ports on the rear of the airport? I assume the other end of the cable goes into any of the Ethernet slots on the back of my router which are marked 'Ethernet', or would it go into the socket marked 'Broadband WAN'?
Appreciate your help and if anyone is willing to speak on phone, I am very ahppy to call you in the next couple of hours! I am in the UK
Best, Anthony

thanks LaPastengue!
Here is what ive got
What ATT router do you have? Exact make and model please.
    gateway 2wire from at&t
What TC do you have.. Latest AC tall one?? Or older one?? If older. .please tell us the model number. A1409 for example from the base mat.
     yes I have the latest airport time capsule 2TB
Please tell us the full setup.. what is currently plugged into the main modem router??
     The Main modem route has an ethernet cord plugged in the other side of the cord is plugged into the phone      jack
Do not plug the TC in first.. plug a single ethernet TC to the computer.. Hmm. so I need an additional ethenet cord to plug the TC into the computer? Leaving the router plugged in as is?
Open the airport utility and change the TC to bridge mode.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-23706673-32722 6/450-411/bridgev6AU.png
Update the TC and then plug it into the ATT modem and plug it into your computer or use the wireless and then tell us what happens.

How can I make my new AirPort Time Capsule with VOIP?

I purchased an AirPort Time Capsule because of the modem capability. The modem we have from the phone company isn't very good.
Now I have a little problem. I forgot we have our phone over internet and I cannot figure out how to set it all up.
Any ideas for my latest problem? I'd run back to the store/genius bar, but it's a ferry ride away and I'm not sure it would do any good to go back because all my phone "stuff" (cords, etc) wall jacks, is all here.
Current set up is this:
Modem box has ethernet (yellow) cable going from it to imac. It also has blue cable going from it to ATA Router (smaller black box). Each box (white larger "modem" box, and black smaller ATA Router) have a phone cord going from wall (2 separate jacks) to the box. And obviously each has it's own power cord.
I tried moving all plugs from white modem box to AP TC, but there really isn't a phone jack on back of APTC. It clicked in place in one of the <--> ports, but I'm getting a flashing amber light on the front, and no internet connection.
Any ideas for my latest issue?? I know so much more about computers than I ever wanted to know, but it obviously isn't enough.
Thanks!

I purchased an AirPort Time Capsule because of the modem capability.
There is no modem in the airport routers.. they are all plain ethernet routers.
It sounds like you have adsl modem.. and I would just leave it alone.
But if you want to play and your ISP supports PPPOE and the modem allows bridging or bridge mode.. then you can bridge the modem and use TC to establish the link to the ISP.. on the internet tab use PPPOE and put in your ISP username and password.
You can then plug the ATA into one of the LAN ports of the TC.
Overall this is probably not a great idea.
Exactly what modem are you talking about .. make and model from the base please?? Who is your ISP?
What model is the ATA? Actual model numbers from it please.
Generally you will plug the TC into the modem and use simple bridge mode.
Even though the airport wizard might attempt to take over as main router.. please do the setup manually and choose bridge mode.
See Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

I am setting up new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resetting and unplugging. How do I fix this?

Similar Messages

Maybe you are looking for