AirPrint with 3040A HP cut off

I've been trying to use the AirPrint feature with my HP 3040A printer and everything works fine until it prints. I've tried with pictures, documents, screenshots...everything. It prints the image in the top left corner of the paper and cuts off the top and sides. It also doesn't print it at all at the size it should be. I've tried on two printers and I have the same issue. Any ideas?

Sorry I looked but I couldn't find the 3040A there. According to Apple's list:
http://support.apple.com/kb/ht4356
the 3050A supports AirPrint but the 3040A is not listed there.
Any chance you are sharing the printer through a Mac or PC?

Similar Messages

A camera icon (with the ends cut off) is on my lock screen, and it wont open the camera app. how do i fix this?

A camera icon (with the ends cut off) is on my lock screen, and it wont open the camera app. how do i fix this? does anyone else have this problem with the iphone 4s?

What do you mean "with the ends cut off"?
You swipe the screen upwards starting on this icon to open the camera app.

HT204406 Problem with iTunes match cutting off a song on my iPhone, not Mac or PC

I have purchased the Katy Perry album "Prism" outside of iTunes and matched it with iTunes match. When I try to play the first song "Roar" on my iPhone, it plays only part of it and then cuts off and plays the second song. This only happens on my iPhone, when I use iTunes match to play the song on either my mac or PC using iTunes, the song plays fine without any issues.
I've tried turning off iTunes match, and then starting it again, no luck. I powered off, then on my iPhone, no luck. I've downloaded the song out of the cloud and still has the same problem... anybody have this problem too or can help?

Some additional observations:
When I look at the album, the song "Roar" has a length of "2:05", but once I play the song by pressing it, the song begins playing and the slider shows a length of 3:39 (close to the correct length). However, once it hits 2:03, it stops and starts playing the next song.
Interestingly, using iTunes on my mac, the song in the album view shows "2:04" but once I double-click the song, the length changes to "3:43", but plays the complete song without any problems.

HDR Pro on CS 5 - Merged image appears but bottom with save buttons cut off??

When I select photos to merge, either via Bridge or within CS5 (Automate/Merge to HDR Pro), the Merged image appears over the CS5 screen. However, the bottom of the HDR screen with the photos selected for the merge along with the Cancel & Save buttons are cut off. The only way for me to exit HDR is to force quit.
My monitor resolution is 1440X900 which is better than the 1024x768 required for CS5.
I noticed the same problem in Terry White's video on Youtube describing workflow between Lightroom & CS5 HDR Pro (http://www.youtube.com/watch?v=rab25UTe6HY) as well as a couple of other users mentioning the problem to Zeno Bokor of Adobe (http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-78e5a.h tml).
Does anyone have a solution???
Thanks.

I found the soluion - after spending over an hour with Adobe phone support (800-833-6687) - of which 45min was being on hold.
It turns out that for some computers, Photoshop CS5 doesn't automatically work as efficiently as it could with the monitor resolution, even if the resolution is > than the minimum 1024 X 768. This is more frequent in those that have had older versions of Photoshop in them. This causes part of the screen to be cut off when going into HDR Pro.
One has to "prime" CS5 to recognize one's computer monitor settings. How to do:
Close out of PS CS5
Go to system preferences and select hardware settings/display (For PC would have to go through Control Panel/Hardware/Display)
Change monitor setting to one recommended by Adobe: 1024 X 768 or 1280 X 800
Save changes. Monitor will look less clear if you have been using higher settings...it's ok for now.
Now open CS5 again and access HDR Pro all three ways available, i.e. via Bridge, Mini Bridge and through PS under File/Automate.
Verify that the entire screen is visible including all thumbnails and Save/Close buttons.
Close out of CS5.
Go back to System Preferences ( for PC, go through Control Panel) and change back to your preferred resolution.
Voila! When you open CS5 again you should be able to see the entire screen.
For example, I use a Macbook Pro with OS 10.6.7 and the monitor resolution was set to 1440 X 900. However, I still couldn't see the bottom of the screen with the Save/Close buttons so couldn't save any work (had to force quit or escape to exit HDR). After doing the above steps, I am now able to use HDR Pro w/o problem and access the Merge via all three modes.
Via Mini Bridge - Choose photos to merge--> Tools (above photos, last on right in Content bar) --> Photoshop --> Merge to HDR Pro
Via Bridge - Choose photos to merge--> Tools (Tool Bar beside "Adobe CS5 Bridge" at left top of screen; 3rd from end) --> Photoshop --> Merge to HDR
Via inside Photoshop - File --> Automate --> Merge to HDR
Since this seems to have affected several people and is a simple solution, I have asked the supervisor I spoke to, Laurie, to please have someone in Adobe post this solution.
Hope this helped.
MJC

Printing pdf files made from Filemaker docs on HP 7410 cuts off top margin

Just bought a MacBook Pro and jumped from Tiger to Snow Leopard.
Also bought FileMaker 10 replacing the FileMaker 8.5 I used up till the MacBook Pro purchase and system upgrade.
Still using the same HP 7410, but during installation, I think I remember upgrading the printer driver. At any rate, this HP Printer is now much more responsive. It was previously very slow.
When I now save documents printed as pdf's from filemaker (as I used to) and then try to print them on the HP 7410, they open fine in Preview showing the whole page with no text cut off. But when I press Print in preview and I get the HP driver preview of what will print as part of the print dialogue box, it shows the top margin of the page cut off (down to at least 1/2 ") and actually prints that way. Before the switch to Snow Leopard and the MacBook Pro, a top margin of 1/4 " worked fine and printed in pdf docs.
(top margins of 1/4" on Word & Excel documents I tested still seem to print fine)
I use the borderless printing work-around, but that seems inelegant. It also takes much, much............much longer to print when it's in that mode (even fast draft).
Why is this happening?
Is there a setting I am missing?
Can this be fixed?
Steve

What print driver are you using?
I set my printer to use the open source Gutenprint driver in place of the one supplied with my printer to resolve an issue I was having - see my post http://discussions.apple.com/thread.jspa?threadID=1626340&tstart=0
The Gutenprint home page is http://gutenprint.sourceforge.net/index.php3
Message was edited by: another_steve

Cut off Event Notes

I noticed that on my iPhone, the notes included with events are cut off for meetings set up by others, and as a result a lot of times critical information, like conference call login information, is cut off with it (my iPad seems to show more, if not all, notes)
For events I set up, there appears to be an "All Notes" button that then shows everything. Events set up by someone else do not have that. Is this new in iOS5? I didn't notice it as an issue before.
Either way, It would be nice to have access to the notes for all events, not that the ones created by me. Am I missing something?

Keynote print layout is a bit of a mess, and is well commented on by users, it prints differently than previous versions, eg in handouts the slide image is much smaller than previously, in grid, the slides are off the printable area on the left.
We are hoping this is fixed in the round of scheduled updates.

HP Envy 4500 cuts off right side of page

When I print a Word 2010 document, the right side of the page is cut off.

Hello Yonniehere,
Welcome to the HP Forums.
I see that you are having an issue with the printer cutting off the right side of the page.
Does this only happen when printing in Word or does it happen with other programs?
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Another problem - phone cuts off incoming calls

Has anyone else had issues since upgrading to iOS4 or at any other time with incoming calls being cut off just a second or so after the phone starts ringing? I've had this happen twice to me today although I've never had the problem before. I know there've been issues with 3GS handsets cutting off calls since the upgrade but I've not seen it mentioned with regards to the 3G. Anyone else experienced this at all?

I'm sorry for misunderstanding you, but you said she went to the Apple store and the third time she bought a new phone. Did the new phone work then? Is the issue still persisting on the old device? That's where I'm confused. Did she get the device replaced or just buy a new phone and the problem is still happening on the old device.

IP2700 Cuts off right edge

I have been using this printer with my desktop with no problem, but now with my new laptop, the 'scale to fit media' function always leaves me with my imagery cut off on the right hand side. I am printing from photoshop with an 8.5x11 inch canvas, and am printing on an 8.5x11 inch sheet, i have scaled to fit media checked, and the bounding box shows that the entire image is fit in with nothing cut off, yet when i print it always cuts off a couple millimeters off the right side. Is there a setting I'm missing, I've done a side by side comparison with my desktop and the laptop's printing screens and they look the same.

I am having the same issue with my iX6520. Margins are set to zero, borderless printing is on, it's scaled to fit, and it still is cutting off. It does this when I try to print from photoshop, and also when I tried to print from Preview. Attached is an image of the problem... I am also on a relatively new laptop (a mac).

Top of Pop up windows are cut off- out of frame, FF 30.0

On sites where I've allowed pop-ups the pop up often displays with the top cut off (out of the frame). Never had this problem with other versions of FF. Just started when I upgraded to 30.0. Win 7, Res 1366 x 768.

Do you mean the content ''in the window'' is cut off, or the window itself is off the screen upwards of where it should be?
''Page content''
Could you try down-zooming the content of the pop-up by holding down the Ctrl key and tapping the - key a couple times. If that makes the content fit the pop-up, the site probably is using a fixed size window that doesn't allow for higher zoom levels.
I am not aware of a fix for that, since the values usually would be hardcoded into the site's script. But pop-up windows should be resizable. That's a hassle if you have to do it often, so perhaps there's an add-on to work around this issue.
''Window position''
If you can't click and drag the title bar down, try using the Windows "Move" function. With the popup window active, press Alt+Spacebar and display the window control menu. This may or may not be visible. Press M to select the move function, and press the down arrow until the title bar of the pop up appears on the screen. Then press Enter to accept the current position.
Does Firefox remember your preferred position the next time, or same problem?

Illustrator cutting off 2" when printing

Illustrator 9.0; WIN2000; HP Deskjet 722C -- Working on pages in Illustrator with photos & copy; the print copies have started coming out with about 2" cut off the bottom of the page; tried changing document setting to legal length but keeping content within the letter-size dimensions, hoping to "fool" the printer with a "longer" print area, but not to be. Any ideas about what's going on and how to remedy?
Tried to .pdf the file(s): First time I .pdf'd it, it printed correctly (with no cut-off); second time I printed it, some gremlin decided to change the fonts to Uzbekistanese or some such -- very strange graphic.... So -- .pdf gives back the complete printable page (still, why doesn't Illustrator?), but takes away my font choices; .pdf comes up with the Uzb font about four times out of five or six ...
Sure would be nice (!) if Adobe Illlustrator wouldn't decide to make changes to my print commands on its own ....
Many thanks for any help

A few things could go wonky and cause this problem (Illustrator being the most fussy of all the Adobe products when it comes to printing).
Artboard - Check to make sure your artboard includes all of your image, i know it's obvious but sometimes you can overlap the boarder if you have a very detailed image without noticing.
Print Paper Size - For some printers you need to set the paper size in the general tab of illustrator as well as in the "Printer" sections and the "Page Setup" section (these are the buttons under the display)
Check your display and if your image is being cut-off there then drag it around (inside the preview window) until it's centered. If all of it won't fit then use the scale options under the General section.
Let me know if all of that doesn't solve the problem, because it's always something small that i forget to do, when Illustrator is giving me printing problems.

Field Cutting Off Numbers

I am having trouble with a field cutting off most of a number when 0.00 is present. The field is named FL025, and pulls information from an outside source. It is right-justified with a 10 digit character limit. It is formatted as a number. This exact same field on other forms works perfectly. I cannot figure out why it keeps cutting off most part of the number on this one. It isn't the field size, no matter how big I make the field, it still cuts off the numbers and half a zero is all that shows, or perhaps it's a parenthesis. I'm not sure. See clip below.

We are trying to help you find the problem. There maybe some issue with the format you selected. The suggested change is for testing and observation only. This is part of the debugging process. You could also use JavaScript to examine the field, but I do not think you can do that.
Normally the parenthesis do not display for zero unless the value is a negative number smaller than the amount the field is formatted to display and it is possible to enter a digit with more than 10 digits especially for decimal values.
An image does not provide much information. Many computer programs have data in a different format than what is displayed.
Can you post a link to a sample form with the data?
If the data supplied is formatted with currency symbols and a thousand separator the 'Number:" format will not display it properly. The number format only accepts the numeric digits, a leading sign, and a decimal point. The decimal [point might also need to be the "." and not ",". If it is a "," there maybe a script in the other forms that make the correction when the outside source is quired.
What version of Acrobat are you using? Database access has been removed for Acrobat forms but remains for LiveCycle forms.
Is the form being populated by a direct data connection or through some other software?
Have you tried talking to your companies IT support?

CS4: Publish Settings window cut off

When I bring up Publish Settings, the window the comes up is
cut off on my MacBook. I can't grab it and move it down into the
center of the screen since the top of it is out of reach. Probably
easier to just check out the screen grab:
http://hansen-photo.com/cutoff.png
Any idea how I can fix this?
Thanks

Okay, I think this is officially a bug. I temporarily
installed Mercury Mover so that I could reposition the Publish
Settings window. Problem solved. Except that that next time I
brought up the Publish Settings, it was back in the same old
position with the top cut off.
New question: How do I report a bug to Adobe?
Erik

Phone cutting off

Hi,
new first time user.
Problem with my phone cutting off after a period of time from 5 - 7 minutes upwards.
Thought it may be a filter issue so added filters to 3 empty extension sockets and this seemed to resolve it temporarily.
It1s returned but less frequently and main complainant is my wife who likes lengthy calls to friendsand family!!
My system has a main socket with corded phone and extension to my office which has a single socket with double splitter for telephone and computer lead.
The telephone is a cordless hub with another phone connected wirelessly
3 empty extension sockets in othere parts of the house but all have filters fitted.
Internal wiring is aged, a bit like myself but never caused problems prior to switcing from AOL to BT.
I`m also experiencing some computer interference sporadically as if there is a conflict of signal somewhere.
Any iseas that I can try before calling in an engineer with ensuing costs.
Solved!
Go to Solution.

This sounds like a problem with the wiring although with no master test socket it is difficult to determine where the fault is as your are unable to eliminate your internal wiring. Because of the age of your master socket and internal wiring Openreach will probably raise a charge or a visit - at engineer discretion! However whether this is passed onto you from your communications provider is up to them. If you phone your CP they will be able to test your liine for you, their results if it picks a fault up should give them a measurement as to where the fault is and whether an engineer visit is needed, IE internal or external problem. Eveeryone has their own 2 wires back to the exchange so your fault is unlikely to be affecting anyone else. However there are so many joints to the wires in the external network any of these can go faulty especially after heavy rain, wnid etc.

Voice over cut-offs on Captivate 5.5

Has anyone else had problems with voice overs cutting off in Captivate 5.5? I have kept most projects as small as possible, but even so am getting cut-offs between 2 -5 times within one project (I am recording audio to slides and leaving a gap at the beginning and end on the timeline)

Hi Emily,
You can record audio to 3 slides in different ways.
Option1 :
You can record audio individually on all the three slides by invoking the Slide audio dialog for every slide.
1. On every slide you wish to record audio invoke the slide audio dialog ( from Audio >> Record to >> Slide ) and record for the single slide. Saving the recorded audio will add it to the slide you recorded.
2. You can follow step 1 for all the three slides you wish to record.
Option 2:
You can record audio to all the three slides continuously in one go. You can do this in the SLIDES audio dialog
For ex if you want to record audio for slides 1,2 and 3, then select slide 1 and invoke the slides audio dialog from Audio >> Record to >> Slides
You get a "Record from Slide" dialog. Enter the Slide numbers for which you wish to record audio and click ok.
This will open the slides audio dialog.
Slides audio dialog shows up the slides selected in the "Record from slide" dialog. Enable "Continuous play" and "SWF Preview" and Click on the recording button. This will record audio over the three slides as you narrate. Audio will be added to all the three slides. You can see the Movie (SWF) preview or the Slide number mentioned in the top right of the preview pane to know the slide number you are recording to.
If some portions of the audio spills over the next slide then you can arrange the markers in the EDIT tab. Here you can play the audio and pause at the point where you want your next slide to start and click on the button highlighted by Lilybiri. Its called the "Start Next slide here" button.
After all the recording is done click on SAVE to add audio to all the three slides.
Try out these and let me know if it works.
-Ashwin Bharghav B

AirPrint with 3040A HP cut off

Similar Messages

Maybe you are looking for