Alarm Clock messes up the UI responsiveness and headphone jack is messed up.

I have a problem where the alarm going off makes the UI almost impossible. I have to keep tapping on the snooze or the disabling button until it finally takes my input, it is aggravating. Another one is that when I tap on the headphones, from the jack, the music switches to handset, I have to tap it a bit hard and at a certain point again to get it to switch back to headset.
The headset jack problem got worse in an update with 6.0(later type of 6.0 version), so I reverted(maybe the first 6.0 version), but that doesn't fix the problem, still, but it is less aggravating than before.

Hi megamanx,
Welcome to the BlackBerry Support Community.
To rule out any possible software issue that may be causing this, please try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software. For further instructions, please see the following KB articles.
For Windows®: "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
For Mac: "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
Please test to make sure the issue has been resolved before restoring any data from your backup file.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

Would the alarm clock works with the tablet is off / shutdown?

Hi all
Some users (including me) will turn off / shutdown their device when they are asleep to conserve device battery life.
Would the alarm clock work if the tablet is off / shutdown? I do know some smartphone alarm clock would work when the smartphone is off and when it's ringing, it would just automatically turn on the device without user manually on it.
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...
Solved!
Go to Solution.

No, it doesn't
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

E-63 what type are Alarm Clock Tones for the clock

when try to set the alarm clock tone for the clock if I try to change Tone for alarm I only get optios for Download Default or off. What type of tones do I need to download lor do they have to be in a special folder
Thanks
Message Edited by dougggg on 10-Nov-2009 05:47 PM
Solved!
Go to Solution.

I can choose about a dozen (pre-installed) on my E63 in the alarm menu.
Message Edited by hadimassa on 10-Nov-2009 07:29 PM
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

I have a digital voice recorder with a 3.5mm mic and headphone jack and want to transfer some recorded lecture to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

I have a digital voice recorder with a 3.5mm microphone and headphone jack and want to transfer some recorded lectures to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

Is there a pattern to the time of day or other detail that may be
traced back to a OS X system cause of this odd phenomenon?
Are there any copies of system files on any of the attached USB
external drives? Any libraries, such as iTunes, iPhoto, etc?
Once the drives are indexed by Spotlight, are their permissions
ignored by the OS X? Content, if neutral, should not affect the
wake or sleep cycle; especially if they're ignored by the OS X.
Could there be a bad cable or other component? If so that would
be a difficult process of elimination to detect it. Usually replacing
most suspect components in the USB stream (external to Macs)
is a rote way to mechanically test that idea; & not 100% sure.
Does the equipment all have a good ground to the utility or house
electrical field? An intermittent ground may affect more than sleep.
Hard to say at this point. Maybe a late-night talk radio guru on
remote viewing could peer into your situation and sleuth it out?
Sorry to have run out of ideas, but the process must be electrical
& mechanical to some extent. - Or perhaps odd software inspired.
Do you have any phone-home spyware items inside, just jumping
at the chance to spill your information? Little Snitch may help.
PS: Perhaps the computer needs to go into Apple & have a genius
or product specialist at AASP test the unit thoroughly... BlueTooth?
see:
https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
Good luck & happy computing!
edited 2x

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

What operating system are you using? Is it on a Mac or a PC? Which preferences are set for external mic/headphones, Audition's or the computers?

I need to have audio out from HDMI and headphone jack simultaneously

I need to have audio out from HDMI and headphone jack simultaneously.
I seem to be able to select one or the other, but not both ? !
Thanks

No. You can only use one sound output:
Why can't I select HDMI audio on my Mac mini?
If you connect an HDMI display or television to a Mac mini (Mid 2010 or later), you might not be able to select the HDMI audio device (in System Preferences > Sound > Output). This can happen if you also have headphones plugged in to the computer. Unplug the headphones to be able to select HDMI audio.
Mac computers: Frequently asked questions about using HDMI

I can't hear my phone calls unless I put it on speaker. Tried cleaning by blowing on earpiece and headphone jack and pushing near front camera and earpiece speaker...no luck. HELP!

I can't hear my phone calls unless I put it on speaker. Tried cleaning by blowing on earpiece and headphone jack and pushing near front camera and earpiece speaker...no luck. HELP!

If you've tried everything mentioned you probably have a failed earpiece. One option is to get a BlueTooth headset and use it for all calls. It will be cheaper than the $199 out-of-warranty replacement price from Apple (if it's still in warranty or AppleCare it will be free). Good BT headsets can be had for around $40. And it will hold you over until the Next New Thing from Apple is available

Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

Yes, that's one of the things airplay is for...

Want to get a alarm clock base for the 3g iPhone - any suggestions?

I want to get an alarm clock base for my iPhone 3g.
I have a couple of specs I would like:
A large clock display, preferably in blue
I want to be able to use speaker phone with the phone plugged in the base & have it come through the speakers
Past that, I dont care
Anyone have any suggestions?

Hi,
There's a few on the Apple online store: http://store.apple.com/us/browse/home/shopiphone/iphoneaccessories/speakers?mco=MTU2NjA5OQ
You can also see the ratings and comments left by other customers that purchased the device.
-Jason

Does a clock/ alarm clock app damage the PB screen?

There are some nice clock apps for the playbook and I'd like to put my PB in a dock for overnight chaging and have the screen display a clock, but I'd rather not do that if it will damage the screen or visuals?
Anyone have any information on this - I cant find an answer online.

We have left our internet access terminal on for past 3 years with a LCD screen. No issue with it cept for the light is a bit yellowed from being on all the time.
I have used my playbook a bit often over the past year and no screen burnin at all on it
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

OMGosh, alarm clock woke me up 8 am and I cant shut it off, just keeps going and going, how do I shut it off please help??? Thx

When the alarm is going at the bottom of your screen there will be a line with dismiss on the left and an arrow heading to theright. You have to sweep that arrow to the right for the alarm to be dismissed and finally stop. Don't feel bad the same
thing happened to me. The first few days I went to the app alarm and turned it off from there until on about the third day
I finally noticed the dismiss arrow.

Hello, I forgot the security response and could not recover

hola , se me olvidaron las respuestas de seguridad y no e podido recuperarlas

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

How do you disable "digital optical output" so the red light in headphone jack goes off and I can use the internal speakers?

HI,
I have a red light in my headphone jack and I see "correct responses" listed as "when digital output is enabled speakers are disabled." That's all well and good but doens't really help. HOW do you disable the "digital output," get the red light to turn off and be able to hear through the speakers? What's the SOLUTION to the problem. Sorry, just a bit frustrated. Any help is greatly appreciated.
Best,
dpeast12

Allegedly this can occur if there is a contaminant in the headphone jack that makes the computer believe there is an optical connection there, so it shuts off the internal speakers.
Try inserting and removing a headphone plug repeatedly. This ought to dislodge the junk, and seems to have fixed the problem for others. Hope it helps!

TS4113 Is there a terminal or other type of workaround to allow sound to come from the HDMI and headphone jack at the same time?

I have a late 2012 Mini, running 10.8.2. I have a set of powered speakers plugged into the headphone jack. My TV is running on a direct HDMI connection. I can only stream sound through HDMI, or even select it as an output, if I unplug my headphone speaker plug. Apple's knowlege base says this is the case. I am looking for a way to have both plugged in all the time, and have the sound mirrored to both.
I use the speakers for itunes music, system sounds, skype, etc.. The HDMI sound is for steaming content to the TV. I don't want to have to reach around behind the computer and unplug/plug each time I switch, for a multitude of reasons. Any ideas out there? Google wasn't getting me very far. Maybe a terminal solution of some sort? Thanks in advance.

it seems that m1r3k found a very good workaround, at least for the Mid 2010 Mac mini models (that I'm using right now). I don't know if it works also with more recent Mac mini models.
Re: After upgrading to lion, cant select HDMI sound setting
Open Audio MIDI Setup.app in /Applications/Utility, click the + (plus) button in the bottom left corner of the window and choose "Create Multi-Output Device". In the new device settings tick the HDMI "Use" checkbox and you're done. Simply go to the usual System Preferences Audio panel and choose the newly created device, without the need to unplug the audio cable from the back of the Mac mini. You can also name the new audio device as you want.
NOTE:
This is only a workaround for a deliberate choice made by Apple on OS X Lion 10.7.2 and beyond:
Mac mini: About HDMI audio and headphones
Please let Apple know (here or here) how this has made things unnecessary awkward for users and needs to be fixed (these forums don't count, they are not read by Apple's employees)!

Alarm Clock messes up the UI responsiveness and headphone jack is messed up.

Similar Messages

Maybe you are looking for