Alarms get duplicated many times in an Event

For some reason almost all my events(re-occuring or otherwise) have their alarms duplicated numerous times with in the event. I finally had to shutdown ical and go back in and adjust every event.
Any idea of what causes this. For what it is worth I turned off .mac publishing too just in case this was the cause.
--Mickey

I'm not certain either why it happened.
I used the script Link: [here|http://vocaro.com/trevor/software/applescript> as a basis for removing the duplicate events. The original script checks for a duplicate sound+display alarm, and duplicate sound alarms. However, my problem was with duplicate display alarms, so I changed the code after the comment
+There's also a dupe if there are two sound alarms they're both set to the same trigger interval+
from
+if the (count of sound alarm of this_event) is equal to 2 then+
to
+if the (count of display alarm of this_event) is equal to 2 then+
This worked for -existing- events.
At the moment duplicates are not appearing in new events, so whatever went wrong before is not currently recurring.

Similar Messages

Iphone doesn't make a sound alert when get texts many times

Has anyone else noticed that sometimes you get a sound alert that you got a text and many times you do not?

Hello, Nina1125.
Thank you for visiting Apple Support Communities.
I would make sure that you have a Text Tone set in Settings > Sounds. If your device is witched to silent Text Tones will not be audible.
iPhone Buttons
http://support.apple.com/kb/ta38625
Ringtones and vibrations
Cheers,
Jason H.

Statistics - To get how many time a report has been run

Hi Gurus,
I would like to know how many times each of the reports on the portal has been run. If I could get this by user id, that would be great.
Do you know where I can get such information?
Regards
Mathew

Hi Guys,
This can not be done throug ST03/ST03N. For this you will have to either use the SAP delivered BI Statistics query which is built on 0TCT_M01 multiprovider. Make sure your data is upto date before you run the query.
Disadvantage of teh SAP delivered query is, it will not give you result which is older than 24 hrs. So basically it gives you oppourtinity to analyze only last 24 hrs data. If you want to modify the query, you can copy the query and modify as per your requirement.
Now coming to your question of finding how many times a report is run:
Question is how many queries do you have in your report. If your report contains one query only, there is free char in the query called Frontend Session. Everytime your execute the query you will have a new Frontend session ID.
So create a formula as counters for all values and set the exception aggregation based on Frontend session. This will give you the number of times each query executed. If you drill down by Users, you will get this numbers by users.
- Danny.

HT1338 Why do I get so many "time out" connection problems?

I keep getting "time out" connection problems when I am on computer. I am also experiencing a lot of "spinning wheeling" issues. Are they related?

Hi Garima,
These are the three I use and I get 1 or 2 updates a day on most days....why?
Best regards,
Haye Kesteloo
ServiceSpider, LLC
100 Mill Plain Road
Danbury, CT 06811
Cell: +1 203 522 6727
www.servicespider.com

Document keeps getting duplicated every time I save

I think my preferences have been set up so that every time I make changes to my document I seem to be getting a new copy every time, so that instead of just working on one version, I suddenly have about three or four documents with the same document name. I had this problem once before in Quark and I was told to do something in the saving function in prefernces, but I don't know where to find this in indesign. Please help. Thank you lots.

Stix Hart wrote:
So you've been hitting File > Save As?! Just go Ctrl + S and your duplicate problems will disappear...
I don't think this is what's going on. Doing a Save As each time would would bring up a dialog asking for a name and location, so it would be hard not to notice that you are either making a copy by using a new name or location, or you would overwrite the old file by using the same name and location.
I suspect what's really happening is the OP has been issuing the Save a Copy command, which by default is Ctrl (Cmd) + Alt (Opt) + S. Ironically, your suggestion to use just Ctrl + S should also solve that, since that is the correct command if the shortcusts are set to defaults, but it bears noting that it is possible to edit the keyboard shorcuts so that, for example, the Save and Save a Copy commands are reversed in their use of the second modifier key.
This sort of confusion would only occur when using shortcuts, and not from the file menu. I can conceive of the possibility, too, that a Mac user might be able to accidentally hit Cmd + Opt together with the same finger since the keys are adjacent.

Workflow getting triggered many times

Hi all ,
I m working on Travel management workflows. I have set the triggering event as BUS2089->Created . But Whenever I m saving a travel request , it is triggering the workflow which is not desired .
How can this be rectified ???
Thanks ,
Sonu.

See,
I analysed the problem earlier.
I switched on the EVENT TRACE and ran one TRIP CREATION cycle. I can find that BUS2089 - REQUESTCREATED event is triggered. Well, as per our scenario, I changed that Created Trip, and I can still find the BUS2089 - REQUESTCREATED event even for this action also.
And If I am not wrong this workflow gets triggered for BUS2089 - REQUESTCREATED event(refer your Trip WF Basic Data-Start Events).
So, to avoid this problem, I have used a USER EXIT for TRIP to trigger my WF manually.
Please refer the enhancement FITR0003 for the TRIP Userexit.
I hope this should clear your problem as myn.
Regards,
Raja Sekhar

Ipod nano 4G same albums duplicated many times in album list

I have a nano 4G 8GB and have loaded up some music on it, about 50 odd albums so far, whenever I scroll through the album list it keeps showing 4 albums in duplicate, it's as if there are about 10 copies of each album.
It scrolls through ok then 2 album covers and details appear over and over, then it goes normally, listing albums as it should, then another 2 albums appear over and over, at the moment it is just 4 albums that is doing it.
It only does this when scrolling through the album list, never does it when in cover flow mode, I have reset the ipod and reinstalled the software on it and it still does it, would removing and installing the affected albums correct this problem ?

Similar problem here. I just imported a cd of 17 songs. I entered the info for each song by typing the album name of all 17 and then typed the song titles. I synced to my old Nano and no problem but on my new Nano 6th generation, it separated each song individualy, soooo, I cannot search that album and play it, only one song at a time. Frustrating.

How many times Application.Idle event is generated per second when application is idle?

Hi,
I want to implement a function when application is idle for more than 20sec.. Am using Application.Idle for determining application's idle state.. But i don know how to calculate the idle duration.. Can any one provide a sample code?

E.g.
namespace WindowsFormsApplication2
using System;
using System.Windows.Forms;
public partial class Form1 : Form
MessageFilter messageFilter ;
public Form1()
InitializeComponent();
Application.Idle += new EventHandler(this.Application_Idle);
this.messageFilter = new MessageFilter(this);
Application.AddMessageFilter(this.messageFilter);
private void Application_Idle(Object sender, EventArgs e)
this.timer1.Enabled = true;
private void timer1_Tick(object sender, EventArgs e)
this.textBox1.Text += "timer1_Tick";
public void StopTimer()
this.timer1.Enabled = false;
public class MessageFilter : IMessageFilter
private Form1 owner;
public MessageFilter(Form1 form)
this.owner = form;
public bool PreFilterMessage(ref Message m)
const int WM_TIMER = 0x113;
if ( m.Msg != WM_TIMER)
this.owner.StopTimer();
return false;

How many times does the VideoEvent.READY event get fired?

Hello,
I have 2 videos I am loading via VideoPlayer.load(url). I
have setup eventlisteners(VideoEvent.READY, onVideoLoaded) for each
video so when the videos are loaded my function is called. How many
times should my function onVideoLoaded be called? I assume once for
each video. This is not the case because my function is called
multiple times for the first video and not called at all for the
second video. Can someone to me why? Is this a bug with AS3? Any
help would be appreciated.
Regards,
Nilang

Hi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM

Events showing up many times in iCal on Mac and iPhone

Certain events are showing up many times within my iCal and iPhone. These are clearly duplicate events and can show up as much as 50 times or more on the same day at the same time. Some additional background:
1. I use mobileme and have my iCal syched through Mobile Me
2. I have a gmail calendar that is synching (these events do not appear to be duplicating)
3. I synch my iPhone calendar with my work PC through a USB chord. My work PC uses MS Outlook. Some of these events are duplicated. Especially annual events such as birthdays.
4. I have set my wife's calendar to publish and I have subscribed to her calendar. She has a far more extensive issue of events duplicating and these duplications show up on my iPhone since I subscribe to her calendar.
Any help would be much appreciated.

Hi Martin,
Are you using MobileMe? Are you syncing the events to the iPhone through iTunes or pushing them over the air with MobileMe?
If you are using MobileMe you can set the Time Zone online at http://www.me.com/calendar/ click the Gear> Preferences> Advanced.
Try turning off Time Zone Support on the iPhone, tap Settings> Mail, Contacts, Calendars> Time Zone Support, off.
Did that change the time on the events?
If you are not using MobileMe or that does not resolve the issue, try the tips below.
If the Time Zone Support is on in iCal, try disabling it. Go to iCal>Preferences> Advanced> uncheck Turn on time zone support. You can change Time Zones of events in iCal as described in the iCal help article: "Changing the time zone for an event"
If the issue persists try resetting the sync history as described here: http://support.apple.com/kb/TA23030 and then syncing the calendar events to the iPhone again.
-Jason
Message was edited by: Jason L

Help appending how many times an event ID has occurred next to the unique Event ID.

Hello,
I am trying to figure out how to find how many times an event occurred and then append that next to the single -unique Event ID.
The closest I can find is the Sort-Object Count but I can't figure out how to get that work within the below script.
Any help would be appreciated, the below script works already. but just doesn't have that Event ID count.
Thank you for any help.
Below is the
script to pull all Event Logs for each server, filter them to only display Warnings, Failures, and FailureAudits for Application, System, and Security logs and then remove all duplicate EventIDs so only 1 of each is shown. it then exports that info into a
.CSV per server.
param([string]$days= "31" )
$servers = @("Server1", "Server2" "Server3", "Etc")
$user = Get-Credential
#Set namespace and calculate the date to start from
$namespace = "root\CIMV2"
$BeginDate=[System.Management.ManagementDateTimeConverter]::ToDMTFDateTime((get-date).AddDays(-$days))
$store = "C:\Powershell\MonthlyMaintenance"
foreach ($computer in $servers)
$filter="TimeWritten >= '$BeginDate' AND (type='Warning' OR type='Error' OR type='FailureAudit')"
Echo "Pulling Event Logs for $computer ..."
Get-WmiObject Win32_NTLogEvent -computername $computer -Filter $filter |
sort eventcode -unique |
select Computername,
Logfile,
Type,
@{N='TimeWritten';E={$_.ConvertToDateTime($_.TimeWritten)}},
SourceName,
Message,
Category,
EventCode,
User |
Export-CSV C:\Powershell\MonthlyMaintenance\$computer-Filter.csv
Echo "Done."

Unfortunately adding that to the script just outputs a bunch of jargon:
#TYPE Microsoft.PowerShell.Commands.Internal.Format.FormatStartData
ClassId2e4f51ef21dd47e99d3c952918aff9cd
pageHeaderEntry
pageFooterEntry
autosizeInfo
shapeInfo
033ecb2bc07a4d43b5ef94ed5a35d280
Microsoft.PowerShell.Commands.Internal.Format.AutosizeInfo
Microsoft.PowerShell.Commands.Internal.Format.TableHeaderInfo
9e210fe47d09416682b841769c78b8a3
I did try adding it in various ways and removing the initial # Sort EventCode -unique | # and I just get the same jargon
Am I adding it in wrong some how?
Thank you again for any help.
param([string]$days= "31" )
$servers = @("ComputerName")
$user = Get-Credential
#Set namespace and calculate the date to start from
$namespace = "root\CIMV2"
$BeginDate=[System.Management.ManagementDateTimeConverter]::ToDMTFDateTime((get-date).AddDays(-$days))
$store = "C:\Powershell\MonthlyMaintenance"
foreach ($computer in $servers)
$filter="TimeWritten >= '$BeginDate' AND (type='Warning' OR type='Error' OR type='FailureAudit')"
Echo "Pulling Event Logs for $computer ..."
Get-WmiObject Win32_NTLogEvent -computername $computer -Filter $filter |
sort eventcode -unique |
select Computername,
Logfile,
Type,
@{N='TimeWritten';E={$_.ConvertToDateTime($_.TimeWritten)}},
SourceName,
Message,
Category,
User,
EventCode | Select Name,Count | FT -auto|
Export-CSV C:\Powershell\MonthlyMaintenance\$computer-Filter.csv
Echo "Done."

Why do songs keep duplicating in my Library. One song has duplicated five times. If I delete the unwanted duplicates will it delete the song entirely from my library? How do I get the four unwanted duplicates out of my library?

Why do songs keep duplicating in my library. One song has duplicated five times. I have many that have duplicated up to 3 times. How do I get the duplicates out of the library without removing the song completely?

As above, Apple's official advice on duplicates is here... HT2905: How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
tt2

When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

All of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any

all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.

Okay, that's got one thing ruled out at least.
Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try launching iTunes. Does it open this time?

How do I get Itunes downloaded on a windows 7 32 bit laptop? I have tried many times and it will not recognize it. Thanks

Hi, how do I get Itunes downloaded on a laptop with windows 7 32 bit? I have tried , but failed many times. My daughter is going to get a new phone soon I would like her to be able to save her music to her laptop. Please help if you can. Thanks

If you have an IPHONE 3G and you will be getting a new upgrade soon will you be able to get your downloaded music easily on your new IPHONE??

Alarms get duplicated many times in an Event

Similar Messages

Maybe you are looking for