Album Artwork - Where did the volume and song title go?

I've been searching online for hours and can't find this on my own so i'm reachin out...
I did a software update (which i won't ever do again) and now when a song is playing the cover art (or a big empty box if i remove cover art) is all that shows on the screen. It use to display the current song playing including artwork, the progression of the song, and the volume in the screen. now i can't get any information on the screen other than the album art cover. anybody else experienced this???
Model PA079LL
Software update : 1.2.1

Thank You Jeff
It worked!
I looked for hours and maybe I just missed it but your suggestion worked in 5 seconds. I really appreciate the help!
THANK YOU AGAIN!
Kevin

Similar Messages

Vicious MPD widget not displaying the artist and song title

EDIT: This thread can be closed now. It turns out Clementine doesn't support mpd and I'm now running ncmpcpp and the widget shows the artist and song title.
I have trouble getting the mpd widget running in awesome wm, it will only display "N/A - N/A". I've read the wiki and done a lot of googling but I can't figure out what I'm missing.
Here's my rc.lua
-- Standard awesome library
local gears = require("gears")
local awful = require("awful")
awful.rules = require("awful.rules")
require("awful.autofocus")
-- Widget and layout library
local wibox = require("wibox")
local vicious = require("vicious")
-- Theme handling library
local beautiful = require("beautiful")
-- Notification library
local naughty = require("naughty")
local menubar = require("menubar")
-- {{{ Error handling
-- Check if awesome encountered an error during startup and fell back to
-- another config (This code will only ever execute for the fallback config)
if awesome.startup_errors then
naughty.notify({ preset = naughty.config.presets.critical,
title = "Oops, there were errors during startup!",
text = awesome.startup_errors })
end
-- Handle runtime errors after startup
do
local in_error = false
awesome.connect_signal("debug::error", function (err)
-- Make sure we don't go into an endless error loop
if in_error then return end
in_error = true
naughty.notify({ preset = naughty.config.presets.critical,
title = "Oops, an error happened!",
text = err })
in_error = false
end)
end
-- {{{ Variable definitions
-- Themes define colours, icons, and wallpapers
beautiful.init("/usr/share/awesome/themes/zenburn/theme.lua")
-- This is used later as the default terminal and editor to run.
terminal = "tilda"
editor = "gedit"
-- os.getenv("EDITOR") or
editor_cmd = terminal .. " -e " .. editor
-- Default modkey.
-- Usually, Mod4 is the key with a logo between Control and Alt.
-- If you do not like this or do not have such a key,
-- I suggest you to remap Mod4 to another key using xmodmap or other tools.
-- However, you can use another modifier like Mod1, but it may interact with others.
modkey = "Mod4"
-- Table of layouts to cover with awful.layout.inc, order matters.
local layouts =
awful.layout.suit.floating,
awful.layout.suit.tile,
awful.layout.suit.tile.left,
awful.layout.suit.tile.bottom,
awful.layout.suit.tile.top,
awful.layout.suit.fair,
awful.layout.suit.fair.horizontal,
awful.layout.suit.spiral,
awful.layout.suit.spiral.dwindle,
awful.layout.suit.max,
awful.layout.suit.max.fullscreen,
awful.layout.suit.magnifier
-- {{{ Wallpaper
if beautiful.wallpaper then
for s = 1, screen.count() do
gears.wallpaper.maximized(beautiful.wallpaper, s, true)
end
end
-- {{{ Tags
-- Define a tag table which will hold all screen tags.
tags = {}
for s = 1, screen.count() do
-- Each screen has its own tag table.
tags[s] = awful.tag({"term", "www", "mp3", "skype", "office", "dev", "misc" }, s)
end
-- {{{ Menu
-- Create a laucher widget and a main menu
myawesomemenu = {
{ "manual", terminal .. " -e man awesome" },
{ "edit config", editor_cmd .. " " .. awesome.conffile },
{ "reboot", "gksudo reboot" },
{ "restart", awesome.restart },
{ "quit", awesome.quit }
mymainmenu = awful.menu({ items = { { "awesome", myawesomemenu, beautiful.awesome_icon },
{ "open terminal", terminal }
mylauncher = awful.widget.launcher({ image = beautiful.awesome_icon,
menu = mymainmenu })
-- Menubar configuration
menubar.utils.terminal = terminal -- Set the terminal for applications that require it
-- Initialize widget
mpdwidget = wibox.widget.textbox()
-- Register widget
vicious.register(mpdwidget, vicious.widgets.mpd,
function (mpdwidget, args)
if args["{state}"] == "Stop" then
return " - "
else
return args["{Artist}"]..' - '.. args["{Title}"]
end
end, 10)
-- {{{ Wibox
-- Create a textclock widget
mytextclock = awful.widget.textclock()
-- Create a wibox for each screen and add it
mywibox = {}
mypromptbox = {}
mylayoutbox = {}
mytaglist = {}
mytaglist.buttons = awful.util.table.join(
awful.button({ }, 1, awful.tag.viewonly),
awful.button({ modkey }, 1, awful.client.movetotag),
awful.button({ }, 3, awful.tag.viewtoggle),
awful.button({ modkey }, 3, awful.client.toggletag),
awful.button({ }, 4, function(t) awful.tag.viewnext(awful.tag.getscreen(t)) end),
awful.button({ }, 5, function(t) awful.tag.viewprev(awful.tag.getscreen(t)) end)
mytasklist = {}
mytasklist.buttons = awful.util.table.join(
awful.button({ }, 1, function (c)
if c == client.focus then
c.minimized = true
else
-- Without this, the following
-- :isvisible() makes no sense
c.minimized = false
if not c:isvisible() then
awful.tag.viewonly(c:tags()[1])
end
-- This will also un-minimize
-- the client, if needed
client.focus = c
c:raise()
end
end),
awful.button({ }, 3, function ()
if instance then
instance:hide()
instance = nil
else
instance = awful.menu.clients({ width=250 })
end
end),
awful.button({ }, 4, function ()
awful.client.focus.byidx(1)
if client.focus then client.focus:raise() end
end),
awful.button({ }, 5, function ()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end))
for s = 1, screen.count() do
-- Create a promptbox for each screen
mypromptbox[s] = awful.widget.prompt()
-- Create an imagebox widget which will contains an icon indicating which layout we're using.
-- We need one layoutbox per screen.
mylayoutbox[s] = awful.widget.layoutbox(s)
mylayoutbox[s]:buttons(awful.util.table.join(
awful.button({ }, 1, function () awful.layout.inc(layouts, 1) end),
awful.button({ }, 3, function () awful.layout.inc(layouts, -1) end),
awful.button({ }, 4, function () awful.layout.inc(layouts, 1) end),
awful.button({ }, 5, function () awful.layout.inc(layouts, -1) end)))
-- Create a taglist widget
mytaglist[s] = awful.widget.taglist(s, awful.widget.taglist.filter.all, mytaglist.buttons)
-- Create a tasklist widget
mytasklist[s] = awful.widget.tasklist(s, awful.widget.tasklist.filter.currenttags, mytasklist.buttons)
-- Create the wibox
mywibox[s] = awful.wibox({ position = "top", screen = s })
-- Widgets that are aligned to the left
local left_layout = wibox.layout.fixed.horizontal()
left_layout:add(mylauncher)
left_layout:add(mytaglist[s])
left_layout:add(mypromptbox[s])
-- Widgets that are aligned to the right
local right_layout = wibox.layout.fixed.horizontal()
right_layout:add(mpdwidget)
if s == 1 then right_layout:add(wibox.widget.systray()) end
right_layout:add(mytextclock)
right_layout:add(mylayoutbox[s])
-- Now bring it all together (with the tasklist in the middle)
local layout = wibox.layout.align.horizontal()
layout:set_left(left_layout)
layout:set_middle(mytasklist[s])
layout:set_right(right_layout)
mywibox[s]:set_widget(layout)
end
-- {{{ Mouse bindings
root.buttons(awful.util.table.join(
awful.button({ }, 3, function () mymainmenu:toggle() end),
awful.button({ }, 4, awful.tag.viewnext),
awful.button({ }, 5, awful.tag.viewprev)
-- {{{ Key bindings
globalkeys = awful.util.table.join(
awful.key({ modkey, }, "Left", awful.tag.viewprev ),
awful.key({ modkey, }, "Right", awful.tag.viewnext ),
awful.key({ modkey, }, "Escape", awful.tag.history.restore),
awful.key({ modkey, }, "j",
function ()
awful.client.focus.byidx( 1)
if client.focus then client.focus:raise() end
end),
awful.key({ modkey, }, "k",
function ()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end),
awful.key({ modkey, }, "w", function () mymainmenu:show() end),
-- Layout manipulation
awful.key({ modkey, "Shift" }, "j", function () awful.client.swap.byidx( 1) end),
awful.key({ modkey, "Shift" }, "k", function () awful.client.swap.byidx( -1) end),
awful.key({ modkey, "Control" }, "j", function () awful.screen.focus_relative( 1) end),
awful.key({ modkey, "Control" }, "k", function () awful.screen.focus_relative(-1) end),
awful.key({ modkey, }, "u", awful.client.urgent.jumpto),
awful.key({ modkey, }, "Tab",
function ()
awful.client.focus.history.previous()
if client.focus then
client.focus:raise()
end
end),
-- Standard program
awful.key({ modkey, }, "Return", function () awful.util.spawn(terminal) end),
awful.key({ modkey, "Control" }, "r", awesome.restart),
awful.key({ modkey, "Shift" }, "q", awesome.quit),
awful.key({ modkey, }, "l", function () awful.tag.incmwfact( 0.05) end),
awful.key({ modkey, }, "h", function () awful.tag.incmwfact(-0.05) end),
awful.key({ modkey, "Shift" }, "h", function () awful.tag.incnmaster( 1) end),
awful.key({ modkey, "Shift" }, "l", function () awful.tag.incnmaster(-1) end),
awful.key({ modkey, "Control" }, "h", function () awful.tag.incncol( 1) end),
awful.key({ modkey, "Control" }, "l", function () awful.tag.incncol(-1) end),
awful.key({ modkey, }, "space", function () awful.layout.inc(layouts, 1) end),
awful.key({ modkey, "Shift" }, "space", function () awful.layout.inc(layouts, -1) end),
awful.key({ modkey, "Control" }, "n", awful.client.restore),
-- Prompt
awful.key({ modkey }, "r", function () mypromptbox[mouse.screen]:run() end),
awful.key({ modkey }, "x",
function ()
awful.prompt.run({ prompt = "Run Lua code: " },
mypromptbox[mouse.screen].widget,
awful.util.eval, nil,
awful.util.getdir("cache") .. "/history_eval")
end),
-- Menubar
awful.key({ modkey }, "p", function() menubar.show() end)
clientkeys = awful.util.table.join(
awful.key({ modkey, }, "f", function (c) c.fullscreen = not c.fullscreen end),
awful.key({ modkey, "Shift" }, "c", function (c) c:kill() end),
awful.key({ modkey, "Control" }, "space", awful.client.floating.toggle ),
awful.key({ modkey, "Control" }, "Return", function (c) c:swap(awful.client.getmaster()) end),
awful.key({ modkey, }, "o", awful.client.movetoscreen ),
awful.key({ modkey, }, "t", function (c) c.ontop = not c.ontop end),
awful.key({ modkey, }, "n",
function (c)
-- The client currently has the input focus, so it cannot be
-- minimized, since minimized clients can't have the focus.
c.minimized = true
end),
awful.key({ modkey, }, "m",
function (c)
c.maximized_horizontal = not c.maximized_horizontal
c.maximized_vertical = not c.maximized_vertical
end)
-- Bind all key numbers to tags.
-- Be careful: we use keycodes to make it works on any keyboard layout.
-- This should map on the top row of your keyboard, usually 1 to 9.
for i = 1, 9 do
globalkeys = awful.util.table.join(globalkeys,
awful.key({ modkey }, "#" .. i + 9,
function ()
local screen = mouse.screen
local tag = awful.tag.gettags(screen)[i]
if tag then
awful.tag.viewonly(tag)
end
end),
awful.key({ modkey, "Control" }, "#" .. i + 9,
function ()
local screen = mouse.screen
local tag = awful.tag.gettags(screen)[i]
if tag then
awful.tag.viewtoggle(tag)
end
end),
awful.key({ modkey, "Shift" }, "#" .. i + 9,
function ()
if client.focus then
local tag = awful.tag.gettags(client.focus.screen)[i]
if tag then
awful.client.movetotag(tag)
end
end
end),
awful.key({ modkey, "Control", "Shift" }, "#" .. i + 9,
function ()
if client.focus then
local tag = awful.tag.gettags(client.focus.screen)[i]
if tag then
awful.client.toggletag(tag)
end
end
end))
end
clientbuttons = awful.util.table.join(
awful.button({ }, 1, function (c) client.focus = c; c:raise() end),
awful.button({ modkey }, 1, awful.mouse.client.move),
awful.button({ modkey }, 3, awful.mouse.client.resize))
-- Set keys
root.keys(globalkeys)
-- {{{ Rules
awful.rules.rules = {
-- All clients will match this rule.
{ rule = { },
properties = { border_width = beautiful.border_width,
border_color = beautiful.border_normal,
focus = awful.client.focus.filter,
keys = clientkeys,
buttons = clientbuttons } },
{ rule = { class = "MPlayer" },
properties = { floating = true } },
{ rule = { class = "pinentry" },
properties = { floating = true } },
{ rule = { class = "gimp" },
properties = { floating = true } },
-- Set Firefox to always map on tags number 2 of screen 1.
{ rule = { class = "Firefox" },
properties = { tag = tags[2] } },
-- {{{ Signals
-- Signal function to execute when a new client appears.
client.connect_signal("manage", function (c, startup)
-- Enable sloppy focus
c:connect_signal("mouse::enter", function(c)
if awful.layout.get(c.screen) ~= awful.layout.suit.magnifier
and awful.client.focus.filter(c) then
client.focus = c
end
end)
if not startup then
-- Set the windows at the slave,
-- i.e. put it at the end of others instead of setting it master.
-- awful.client.setslave(c)
-- Put windows in a smart way, only if they does not set an initial position.
if not c.size_hints.user_position and not c.size_hints.program_position then
awful.placement.no_overlap(c)
awful.placement.no_offscreen(c)
end
end
local titlebars_enabled = false
if titlebars_enabled and (c.type == "normal" or c.type == "dialog") then
-- buttons for the titlebar
local buttons = awful.util.table.join(
awful.button({ }, 1, function()
client.focus = c
c:raise()
awful.mouse.client.move(c)
end),
awful.button({ }, 3, function()
client.focus = c
c:raise()
awful.mouse.client.resize(c)
end)
-- Widgets that are aligned to the left
local left_layout = wibox.layout.fixed.horizontal()
left_layout:add(awful.titlebar.widget.iconwidget(c))
left_layout:buttons(buttons)
-- Widgets that are aligned to the right
local right_layout = wibox.layout.fixed.horizontal()
right_layout:add(awful.titlebar.widget.floatingbutton(c))
right_layout:add(awful.titlebar.widget.maximizedbutton(c))
right_layout:add(awful.titlebar.widget.stickybutton(c))
right_layout:add(awful.titlebar.widget.ontopbutton(c))
right_layout:add(awful.titlebar.widget.closebutton(c))
-- The title goes in the middle
local middle_layout = wibox.layout.flex.horizontal()
local title = awful.titlebar.widget.titlewidget(c)
title:set_align("center")
middle_layout:add(title)
middle_layout:buttons(buttons)
-- Now bring it all together
local layout = wibox.layout.align.horizontal()
layout:set_left(left_layout)
layout:set_right(right_layout)
layout:set_middle(middle_layout)
awful.titlebar(c):set_widget(layout)
end
end)
client.connect_signal("focus", function(c) c.border_color = beautiful.border_focus end)
client.connect_signal("unfocus", function(c) c.border_color = beautiful.border_normal end)
function run_once(prg,arg_string,pname,screen)
if not prg then
do return nil end
end
if not pname then
pname = prg
end
if not arg_string then
awful.util.spawn_with_shell("pgrep -f -u $USER -x '" .. pname .. "' || (" .. prg .. ")",screen)
else
awful.util.spawn_with_shell("pgrep -f -u $USER -x '" .. pname .. " ".. arg_string .."' || (" .. prg .. " " .. arg_string .. ")",screen)
end
end
awful.util.spawn_with_shell("setxkbmap -layout se")
run_once("tilda",nil,nil,"term")
run_once("firefox &",nil,nil,"www")
run_once("clementine ",nil,nil,"mp3")
run_once("skype ",nil,nil,"skype")
run_once("dropboxd &",nil,nil,nil)
run_once("keepassx ",nil,nil,"www")
run_once("volumeicon &",nil,nil,nil)
awesome.font = "DejaVuSansCondensed 12"
Here's my mpd.lua:
-- Licensed under the GNU General Public License v2
-- * (c) 2010, Adrian C. <[email protected]>
-- {{{ Grab environment
local tonumber = tonumber
local io = { popen = io.popen }
local setmetatable = setmetatable
local string = { gmatch = string.gmatch }
local helpers = require("vicious.helpers")
-- Mpd: provides Music Player Daemon information
-- vicious.widgets.mpd
local mpd = {}
-- {{{ MPD widget type
local function worker(format, warg)
local mpd_state = {
["{volume}"] = 0,
["{state}"] = "N/A",
["{Artist}"] = "N/A",
["{Title}"] = "N/A",
["{Album}"] = "N/A",
["{Genre}"] = "N/A",
--["{Name}"] = "N/A",
--["{file}"] = "N/A",
-- Fallback to MPD defaults
local pass = warg and (warg.password or warg[1]) or "\"\""
local host = warg and (warg.host or warg[2]) or "127.0.0.1"
local port = warg and (warg.port or warg[3]) or "6600"
-- Construct MPD client options
local mpdh = "telnet://"..host..":"..port
local echo = "echo 'password "..pass.."\nstatus\ncurrentsong\nclose'"
-- Get data from MPD server
local f = io.popen(echo.." | curl --connect-timeout 1 -fsm 3 "..mpdh)
for line in f:lines() do
for k, v in string.gmatch(line, "([%w]+):[%s](.*)$") do
if k == "volume" then mpd_state["{"..k.."}"] = v and tonumber(v)
elseif k == "state" then mpd_state["{"..k.."}"] = helpers.capitalize(v)
elseif k == "Artist" then mpd_state["{"..k.."}"] = helpers.escape(v)
elseif k == "Title" then mpd_state["{"..k.."}"] = helpers.escape(v)
elseif k == "Album" then mpd_state["{"..k.."}"] = helpers.escape(v)
elseif k == "Genre" then mpd_state["{"..k.."}"] = helpers.escape(v)
--elseif k == "Name" then mpd_state["{"..k.."}"] = helpers.escape(v)
--elseif k == "file" then mpd_state["{"..k.."}"] = helpers.escape(v)
end
end
end
f:close()
return mpd_state
end
return setmetatable(mpd, { __call = function(_, ...) return worker(...) end })
I'm using Clementine to play the music if that makes a difference.
Last edited by DisposableHero (2013-11-25 01:12:01)

Hi,
If the songs were purchased from itunes, I suggest that you delete the tracks from your itunes library and move to trash (providing you live in a country that permits redownloading). See http://support.apple.com/kb/PH12283.
Jim

Where did the Partitions and SubPartitions go?

I created a table with partition Range (Transaction_Date, Retention_Period) and hash (Record_Id) subpartition template (for 32 subpartitions)
Then I add more partitions and while the loop is going on I can get counts of partitions and subpartitions. The job finished and my log table shows about 1800 partitions added and there should be 32 subpartitions for each of the partitions. However, user_tab_partitions shows zero records for the table, and user_tab_subpartitions also show zero record. After a few minutes the partitions show up but no subpartitions. The indexes on the table have also disappeared (one local and one global)
Any explanation for this behaviour?
Working on Exadata 11.2.0.3
Querying
USER_TABLES
USER_TAB_PARTITIONS
USER_TAB_SUBPARTITIONS
USER_INDEXES

>
Step 1. Create Table xyz (c1 date, c2 integer c3 integer, etc)
partition by range (c1,c2)
subpartition template (s01, s02... s32)
create index i1 on xyz (c1,c2,c3) local;
Then, since I want to create about 1800 partitions I have a procedure that has a "loop around" ALTER TABLE add Partition .. until all the partitions are created. This is the "Job" which while running I query USER_TAB_PARTITIONS and USER_TAB_SUBPARTITIONS to see how things are progressing. And Yes ALTER Table has no progressing to verify.
So al the partitions get created. No errors from the procedure to go through creating all the partitions. So I would expect that at the end I should get to see all the new partitions for the Table. Instead I get "no records" from USER_TAB_PARTITIONS and USER_TAB_SUBPARTITIONS.
I am also aware that "ALTER TABLE ADD PARTITION .." cannot make indexes go away. However, if the query on USER_INDEXES returns nothing, what happend to the Index created before the partitions were added?
I am not using DBMS_REDEFINITION. The only procedure is to add partitions one at a time for each date for 3 years. If you have a better way than a procedure please advise accordingly.
>
In order to help you the first step is to understand what problem you are dealing with. Then comes trying to determine what options are available for addressing the problem. There are too many times , and yours may, or may not, be another one, where people seem to have settled on a solution before they have really identified the problem.
Anytime someone mentions the use of dynamic SQL it raises a red flag. And when that use is for DDL, rather than DMl, it raises a REALLY BIG red flag.
Schema objects need to be managed properly and the DDL that creates them needs to be properly written and kept in some sort of version control.
Scripts and procedures that use dynamic SQL are more properly used to create DDL, not to execute it. That is, rather than use a procedure to dynamically create or alter a table you would use the procedure to dynamically create a DDL script that would create or alter the table.
Let's assume that you know for certain that your table really needs to have 1800 partitions, be subpartitioned the way you say and have partition and subpartitions names that you assign. Well, that would be a pain to hand-write 1800 partition definitions.
So you would create a procedure that would produce a CREATE TABLE script that had the proper clauses and syntax to specify those 1800 partitions. Your 'loop' would not EXECUTE an ALTER TABLE for each partition but would create the partition specification and modify the partition boundaries for each iteration through the loop. Sort of like
for i from 1 to 365 loop
add partition spec for startDate + i
end loop;The number of iterations would be a parameter and you would start with 2 or 3. Always test with the smallest code that will produce the correct results. If the code works for 3 days it will work for any larger reasonable number.
Then you would save that script in your version control system and run it to create the table. There would be nothing to monitor since there is just one script and when it is done it is done.
That would be a proper use of dynamic sql: to produce DDL, not to execute it.
Back to your issue. If I were your manager then based on what you posted I would expect you to already have
1. a requirements document that stated the problem (e.g. performance, data management) that was being addressed
2. test results that showed that your proposed solution (a table partitioned the way you posted) solves the problem
The requirements doc would have detail about what the performance/management issues are and what impact they are having
You also need to document what the possible solutions are, the relative merits of each solution and the factors you considered when ranking the solutions. That is, why is your particular partitioning scheme the best solution for the problem.
You should have test results that show the execution plans and performance you achieved by using a test version of your proposed table and indexes.
Until you have 'proven' that your solution will work as you expect I wouldn't recommend implementing the full-blown version of it.
1. Create a table MANUALLY that has 2 or three days worth of partitions.
2. Load those partitions with a representative amount of data
3. Execute test queries to query data from one of those partitions
4. Execute the same test queries against your current table
5. Capture the execution plans (the actual ones) for those queries. Verify that you are getting the performance improvements that you expected.
Once ALL of that prep work is done and you have concluded that your table/index design is correct then go back to work on writing a script/procedure that will produce (not execute) DDL to produce the main table and partitioning you designed.
Just an aside on what you posted. The indexes should be created AFTER the table and its partitions are created. If you are creating your local index first, as you post suggests, you are forcing Oracle to revamp it 1800 times when each partition is added. Just create the index after the table.
p.s. the number of posts anyone has is irrevelant. The only thing that matters is whether the advice or suggestions they provide is helpful. And the helpfullness of those is limited to, and based on, ONLY the information a poster provides. For exampe, your proposed partitioning scheme might be perfectly appropriate for your use case or it could be totally inappropriate. We have no way of knowing without knowing WHY you chose that scheme.
But I haven't seen one like that so it makes me suspicious that you really need to get that complicated.

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. help

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. Please I Need Help

See this Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/nano5gen/
Reset
How to reset iPod

I had 200 song the i have bought and now i only have 4 purchased songs where did they go and why dd this happen i didnt spend all this money for them to disappear.

i had 200 song the i have bought and now i only have 4 purchased songs where did they go and why dd this happen i didnt spend all this money for them to disappear.

sorry to hear that. You can try redownloading them from iTunes in the Cloud or from your purchased page:
Downloading past purchases from the iTunes Store, App Store, and ...
support.apple.com/kb/ht2519
This article may also help you locate them:
iTunes: Finding lost media downloads
http://support.apple.com/kb/TS1408

Album artwork isn't showing up in album view (where all the albums are) but IS showing up when you drill into the specific album.

The album artwork isn't showing up in the album view where all the different albums are shown but when you drill into the specific album then it is shown. This seems to be a recent problem as it wasn't happening in the past.

Nope, that doesn't work. First, I manually manage the music, but even deleting and using auto-fill, doesn't put all the album art in place even though it is all on the songs in iTunes. Even copying and pasting from iTunes to the iPhone does not get the artwork to show up, despite the fact it shows up in "Info" on the iPhone in iTunes. Plus there seems no rhymn nor reason as to the missing artwork, some ripped songs have it, some purchased songs do not. Bizarre! But I've run across this problem every since time I've restored an iPhone and had to redo the music separately, however, previously I could manually drop and drag the song over after the auto-fill to replace (after deleting on the iPhone) and the artwork would show up. Not this time however. This is one of those details I find extremely annoying!

How do i copy album artwork to all the songs in an album

How do i copy album artwork to all the songs in an album as some of the songs do not have the artwork, as with the previous version of itunes you had to load artwork individually.
I have tried the copy and paste option and that does not work
Look forward to hearing from you

"How do i copy album artwork to all the songs in an album as some of the songs do not have the artwork, as with the previous version of itunes you had to load artwork individually."
That suggests some underlying issue, as iTunes has always (AFAIR) allowed artwork to be assigned with multiple tracks in a single action. For an album, right-click on the album, select Get Info, select the Artwork tab. You then have three options:
If the artwork image exists as a file, click the Get Artwork button, browse to and select the file, then click Open.
Drag and drop the image file from Windows Explorer to the Artwork tab (previous releases also allowed drag and drop from a web browser, this functionality is missing - either by design or as the result of a bug - in iTunes 12).
If you've copied the artwork image to the clipboard, press Ctrl-V on the keyboard to paste in the image (prior to the 1st release of iTunes 12 this could also be done using right-click > Paste - hopefully this will be restored as a bug-fix in the next update)
"I have tried the copy and paste option and that does not work."
There are three possible causes for this:
The format of your media files doesn't support embedded artwork - specifically, uncompressed audio in WAV format. You'll need to convert to Apple Lossless (without loss of quality) or either MP3 or AAC (if you're OK with lossy media) before artwork images can be associated with your media.
Windows' permissions are preventing your media files from being updated when iTunes attempts to embed the images (in a perfect world iTunes should report this as an error, but it actually does nothing). To check this, find the folder that contains media of interest in Windows Explorer (by default this will be C:\Users\user_name\Music\iTunes\iTunes Media\Music\artist_name\album_name), right-click and select Properties, Security tab - check that your Windows user account has full control over the folder.
The media files that you're trying to add artwork to may be set to read-only in Windows. Select the folder as before in Windows Explorer, right-click > Properties and make sure that the Read-only flag is cleared.

My iphone says I have 331 songs but only 139 can be played...where did the others go? How to get them back?

The songs disappeared from two computers and are grayed in on my iphone...I cannot play 192 songs...how to get them back or how to delete them from my phone so I can start over? I do not want icloud...I synced my phone to the computer and everything was fine for awhile...where did the songs go?

Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.

Disable 24-bit crystalizer... and where did the snap/crackle/pop

For the longest time, I thought the crackling and popping was because of the CMSS3D Headphone option being enabled, but just for kicks, I tried disabling the 24-bit crystalizer, and poof! Where did the snap/crackle/pop go? It seems to be gone! I can li've without the crystalizer, after all there is really no way to make something sound better than the source. This gives me hope that it is a driver issue after all. I have a Rev A fatalty.

It is still there... you cant just hear it as good anymore.. i never have crystalizer on, i still got my rice crispies. So good if you dont hear it anymore.. but i know this wont fix it for many of us. I can agree that if i have cmss3d enabled but have MacroFX and Elevation Filter off, the pops& crackles are lower in volume.

I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H.

Got a new Macbook Pro itunes music was all there. Suddenly it is not and my library is probably about 1/4 of what it was.....where did the music go and how do I get it back?

Got a new Macbook Pro itunes music was all there. Suddenly it is not and my library is probably about 1/4 of what it was.....where did the music go and how do I get it back?

Hi there,
You may find the article below helpful.
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
-Griff W.

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and slide the scrub through songs. This has always worked for me until now. I have not changed any settings

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and scrub through songs. This has always worked for me until now. As far as i know, i have not changed any settings. This is whle my phone is locked both on the slide up toolbar/menu interface and on the normal screen before i slide to unlock.

I skimmed through this very long post but from what I read, this sounds much more like a coverage issue with your network than a device issue. I have not seen or heard of this issue before and I do not have this issue personnally and & I use the music app quite frequently while working in the yard.
The DND feature should not be a factor at all if you're sure it's turned off. I always recommend restarting your phone by holding down the home button + the lock button for 10-12 seconds until the Apple logo appears. Once the phone reboots, do a test to see if this has helped to resolve the issue.
If not, go to Settings > General > Reset > Reset Network Settings. Then, test it out again. Post back if neither of these solutions solve your issue.

My iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my prob

Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please

Hey Kirby17,
Thanks for using Apple Support Communities.
If you are not getting any sound from the speaker, follow this article.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Have a nice day,
Mario

HT2493 I downloaded Maverick and when done noticed that the "BURN" icon for my cd/dvd burner is missing. Where did it go and how do I get it back?

I downloaded Maverick and when done noticed that the "BURN" icon for my cd/dvd burner is missing. Where did it go and how do I get it back?

In a Finder window, right click on the window's tool bar, select Customize, and drag the Burn button to the tool bar.

I have CS6 it use to have the Acrobat XPro now it is gone. Where did it go and how do I get it back?

I have CS6 it use to have the Acrobat XPro now it is gone. Where did it go and how do I get it back?

We can't know. You are not offering any system info or details on what product/ suite you are actualyl referring to by "CS6" nor do we know what update or install procedures on your system you may have done recently. There was an Acro update last week, perhaps it bombed and destroyed your Acro install...
Mylenium

Album Artwork - Where did the volume and song title go?

Similar Messages

Maybe you are looking for