Album, Version 0.2 error

From HTMLDB Studio, I have downloaded recent Album app, that should demonstrate woking with oracle Intermedia.
In step 13 (last step), "13_create_pbk_picture.sql", there are creation of PBK package. I get the error:
IF ordplsgwyutil.cache_is_valid( local_image.getUpdateTime() )
PLS-00201: identifier 'ORDPLSGWYUTIL.CACHE_IS_VALID' must be declaredThe problem is that I cannot find "ordplsgwyutil" package in ORDSYS or ORDPLUGINS schema...
 
I have valid Intermedia installation (checked through imchk.sql script from $ORACLE_HOME dir)
 
My configuration is:
 10gR2 10.2.0.1 EE
 Appex 2.0000
 
In readme there is written that is tested on 10gr2 ... but in our case it is not working.
 Could anyone help me correct this...
 THX!

for those who has the same problem here is the solution:
http://www.oracle.com/technology/software/htdocs/devlic.html?/technology/software/products/intermedia/htdocs/xplatformsoft.htm#imedia_code_wizard
and download "Code Wizard for the PL/SQL Gateway (40KB)" part!
The best part was that Oracle has introduced "kit" or Wizard...and this confused me....
THX for support from here!

Similar Messages

Version 31.3, error in upadting RSS feeds. Error Message - not a valid feed.

After upgrading to version 31.3, error in updating RSS feeds.
Error message - not a valid feed.
Unable to Attach screen shot of feed validator results

The answer is in the guide, please read it carefully:
https://support.mozilla.org/en-US/kb/how-subscribe-news-feeds-and-blogs
You can turn on extreme debugging as well. The problem is always with the publisher failing to follow specs; inform them to do so.

File is not compatible with this version of Photoshop error

Computer crashed yesterday and now I am getting "File is not compatible with this version of Photoshop" error and unable to opening in PS CS5 or Fireworks CS5. Any ideas? Also tried the PS repair download and would rather not pay $30 to find out it can't do it. Seems like a common error but in all of the forums I haven't found a solid answer. Appreciate some real advise.
Thanks in advance

This is the free app that all the PSD repair hacks are based on: Telegraphics - Free plugins for Photoshop & Illustrator...and other software
There are 3 possible reasons for that error: file corruption on disk, more than 8000 layers in the file, or a layer somehow went over 30,000 pixels in a PSD file (which would be legal in PSB, but not in PSD).

When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?

When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?

Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Cannot open Microsoft Office Mac 2011 after migrating to new computer. OS 10.9.1: Microsoft Error Reporting log version: 2.0 Error Signature: Exception: EXC_CRASH (SIGTRAP) Date/Time: 2014-01-19 23:31:24 0000 Application Name: Microsoft Word Application

Got a new MacBook Pro and migrated my settings and applications from old computer. Reinstalled Microsooft Office from a disk, after I opened a document and it said I was missing some software components. Now when I open any office application, I get:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_CRASH (SIGTRAP)
Date/Time: 2014-01-19 23:31:24 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.3.9.131030
Crashed Module Name: merp
Crashed Module Version: 2.2.4.131030
Crashed Module Offset: 0x00004422
Blame Module Name: MicrosoftSetupUI
Blame Module Version: 14.3.9.131030
Blame Module Offset: 0x0000e516
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0

Hi,
Do you get the error message like "Office <Update version number> can't be installed on this disk. A version of the software required to install this update was not found on this volume. To learn how to fix it this issue, see "I can't install Office
for Mac updates" at http://www.microsoft.com/mac/help.mspx."
If it was, please follow the kb to fix the issue:
http://support.microsoft.com/kb/969065/en-us
Then, here is a forum for Office based on the Windows operation system, we are lack of the source about the Office for mac, you'd better post your question to Answers forum:
http://answers.microsoft.com/en-us/mac/forum/macoffice2008?tab=Threads
Regards,
George Zhao
TechNet Community Support

Im trying to buy a song from a album but i get error that it is no longer available. The other songs is working and its a new album. I typer in the wrong password on this song. Could that be the issue?

Im trying to buy a song from a album but i get error that it is no longer available. The other songs is working and its a new album. I typer in the wrong password on this song. Could that be the issue?

Never rely upon the iTunes Store to always have your purchases. Always keep a copy of everything safe on a backup drive at home.
"After you download your purchases, back up your iTunes library. Previous purchases may be unavailable if they've been refunded or aren't on the iTunes Store." - http://support.apple.com/kb/ht2519

Nome evento problema:     APPCRASH   Nome applicazione:     iTunes.exe   Versione applicazione:     11.1.4.62   Timestamp applicazione:     52ddbf7a   Nome modulo con errori:     StackHash_1025   Versione modulo con errori:     6.0.6002.18881   Timestamp

Nome evento problema:    APPCRASH
Nome applicazione:    iTunes.exe
Versione applicazione:    11.1.4.62
Timestamp applicazione:    52ddbf7a
Nome modulo con errori:    StackHash_1025
Versione modulo con errori:    6.0.6002.18881
Timestamp modulo con errori:    51da3e27
Codice eccezione:    c0000374
Offset eccezione:    000b06fc
Versione SO:    6.0.6002.2.2.0.256.6
ID impostazioni locali:    1040
Informazioni aggiuntive 1:    1025
Ulteriori informazioni 2:    491df5c84464b99ef8f61e542b4c9ce4
Ulteriori informazioni 3:    9ade
Ulteriori informazioni 4:    7f7b00bf8397fb6909813f504d7de648

Nome evento problema:
APPCRASH
Nome applicazione:
Adobe Premiere Pro.exe
Versione applicazione:
5.0.3.0
Timestamp applicazione:
4ce382d1
Nome modulo con errori:
StackHash_8659
Versione modulo con errori:
6.1.7601.18247
Timestamp modulo con errori:
521eaf24
Codice eccezione:
c0000374
Offset eccezione:
00000000000c4102
Versione SO:
6.1.7601.2.1.0.256.48
ID impostazioni locali:
1040
Informazioni aggiuntive 1:
8659
Ulteriori informazioni 2:
865914f2b0aba0a7f763eb3f160d9c9b
Ulteriori informazioni 3:
5def
Ulteriori informazioni 4:
5defc8630ba14d9bda1ae72188ae0e03@
E' da quando ho istallato il plug-in Heroglift della Pro-Dad
Fino ad ora con istallati: Magic Bullet, New Blue, ProDad Vitascene e Boris non mi aveva dato eccessivi problemi.
Qualcuno ha avuto la stessa triste esperienza? Grazie e spero qualcuno possa aiutarmi

ERROR: invalid backup file version. Exception: Error while unzipping invalid wcs 7.x export file

Hi,
I'm having a serious issue with your brend new Cisco Prime Network Control System (NCS) and i would appreciate if someone could give me good answers.
After a background backup task failure, the database was entirelly corrupted and the oracle server no longuer wanted to start. And because of that the NCS web server is unusable, since no one can log in.
We tryed to restore to last known backup obtained after a former suucessful backup. But we get this error:
"ERROR: invalid backup file version. Exception: Error while unzipping invalid wcs 7.x export file"
All the lost data was previously migrated from the former WCS 7.x server. Before this issue everything was working fine.
So we think that the appliance is seeing the backup file from NCS as a WCS backup.
We need to find rapidly a solution. Here is our configuration:
We formerly had WCS 7.0.172.0 hosted on Microsoft Windows Server 2003 SP2 with the above caracteristics:
Intel(R)Xeon(R) CPU 5120 @ 1.86Ghz 1.87Ghz 16GB of RAM.
We now have NCS Version 1.1.1.24 running under Cisco Application Deployment Engine
OS Release: 2.0
ADE-OS Build Version: 2.0.1.038
ADE-OS System Architecture: x86_64

I was getting this error too. TL;DR: When you transfer the wcs.zip file to your FTP server, make sure you are using BINARY mode... which is often NOT the default FTP mode.
Long Version:
TO GET THIS ERROR, what I had done was use the Windows CLI FTP command to transfer my "wcs.zip" to the NCS FTP server.
-----BEGIN WRONG STEPS-----
C:\ftp
ftp> open x.x.x.x
Connected to x.x.x.x.
220 Service ready for new user
User (x.x.x.x:(none)): ftp-user
331 User name okay, need password for ftp-user
Password:
230 User logged in, proceed
ftp> put wcs.zip
200 Command PORT okay
150 File status okay; about to open data connection
226 Closing data connection
ftp: 526768949 bytes sent blah blah etc
-----END WRONG STEPS-----
I would then run "ncs stop" and "ncs migrate" and get the "ERROR: invalid backup file version. Exception: Error while unzipping invalid wcs 7.x export file".
I remembered something from my misspent youth: Windows, for no good reason, likes to transfer files in ASCII mode. UNIX (which LINUX comes from) prefers BINARY, and the two do not like to negotiate.
TO FIX THIS, I had to just FTP in Binary mode.
-----BEGIN RIGHT STEPS-----
C:\ftp
ftp> open x.x.x.x
Connected to x.x.x.x.
220 Service ready for new user
User (x.x.x.x:(none)): ftp-user
331 User name okay, need password for ftp-user
Password:
230 User logged in, proceed
ftp> binary
200 Command TYPE okay
ftp> put wcs.zip
200 Command PORT okay
150 File status okay; about to open data connection
226 Closing data connection
ftp: 526768949 bytes sent blah blah etc
-----END RIGHT STEPS-----
NOW when I enter "ncs stop" (actually... had to restart them... then stop them... x.x) and then the proper "ncs migrate" commands, I get a happy output and don't have to go home late troubleshooting this.
" Stage 1 of 5: Decompressing backup ...
-- complete.
Stage 2 of 5: Restoring Support Files ...
              : Restoring the Domain Maps ...
              : -- complete.
              : Restoring the License files ...
              : -- complete.
-- complete.
Stage 3 of 5: Restoring Data ...
I hope this helps anyone banging their head against the WCS->PI1.3 install wall.
(Note, WCS needs to be migrated to NCS 1.1.1.24 (NOT NCS 1.1.3!!!!!) before you can migrate to Prime Infrastructure 1.2 or 1.3, because for no readily apparent reason the "ncs migrate" command was removed from PI 1.2 and up. Also note, there is no "Prime Infrastructure 1.1;" they just renamed NCS to Prime Infrastructure after NCS 1.1 because. Yes, the sentence ends there. Great products, all 3, just... agonizing to migrate.)

HT201272 I want to download a previously purchased album that had an "error" and isn't complete. I have an older Mac and don't have iCloud. Surely there is some way to get the music I paid for!

I want to download a previously purchased album that had an "error" and isn't complete. I have an older Mac and don't have iCloud. Surely there is some way to get the music I paid for!

Hi,
See this http://support.apple.com/kb/ht2519
Jim

While installing latest version of iTunes error "This iTunes installer is intended for 32-bit versions of Windows. Please download and install the 64-bit iTunes installer instead" how to deal with it ?

While installing latest version of iTunes error "This iTunes installer is intended for 32-bit versions of Windows. Please download and install the 64-bit iTunes installer instead" how to deal with it ?

Doublechecking. What's the filename of the installer you've been downloading? (The 32-bit installer is called iTunesSetup.exe, and the 64-bit installer is called iTunes64Setup.exe.)

How do you get album artwork? I have like two thousand songs and about 95% don't have cover album artwork and when i try to get album artwork it says "Itunes can not find album artwork" "an unknown error occurred-609" what do i do?

How do you get album artwork? I have like two thousand songs and about 95% don't have cover album artwork and when i try to get album artwork it says "Itunes can not find album artwork" "an unknown error occurred-609" what do i do?

Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

When I try to export a photo to my desktop I get the followiing error message "Export Versions Complete with Errors" any ideas why?

when I try to export a photo to my desktop I get the followiing error message "Export Versions Complete with Errors" any ideas why?

Have you tried to export different images as a test to see if it is related to the one you are getting the error on? Also try to export to a different folder other then the Desktop, again to see if the problem is connected to that folder.
Another thing to do is run the Aperture Library First Aid on the library. Hold the option and command keys down while you start Aperture. First run the Permission Repair and see if that helps. If not quit Aperture and restart and run the Library Repair and try.
Post back if you still have problems
regards

Hi when I open each application for mac office, the app closes and it pops up the following error: Microsoft Error Reporting log version: 2.0 Error Signature: Exception: EXC_BAD_ACCESS Date/Time: 2014-03-27 14:14:52 +0000 Application Name: Microsoft Exce

Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2014-03-27 14:14:52 +0000
Application Name: Microsoft Excel
Application Bundle ID: com.microsoft.Excel
Application Signature: XCEL
Application Version: 14.1.4.111121
Crashed Module Name: libTIFF.dylib
Crashed Module Version: unknown
Crashed Module Offset: 0x000078ae
Blame Module Name: MicrosoftComponentPlugin
Blame Module Version: 14.1.4.111121
Blame Module Offset: 0x0000d9fc
Application LCID: 1040
Extra app info: Reg=en Loc=0x0410
Crashed thread: 0

Hi mattiaprodomo,
If you are having issues with an app that unexpectedly closes on launch, you may find the following article helpful:
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
Regards,
- Brenden

My Microsoft Office won't work! Here is the error report. Microsoft Error Reporting log version: 2.0 Error Signature: Exception: EXC_BAD_ACCESS Date/Time: 2015-03-04 12:04:03 0000 Application Name: Microsoft Word Application Bundle ID: com.microsoft

My Microsoft Office won't work after upgrading to the newest OS from Apple! HELP!!!!!!
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2015-03-04 12:04:03 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.4.8.150116
Crashed Module Name: unknown
Crashed Module Version: unknown
Crashed Module Offset: unknown
Blame Module Name: MSXML
Blame Module Version: 14.4.8.150116
Blame Module Offset: 0x00003125
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0

If your startup disk says it is full, you need to remove some of your stuff.
Either move some documents/movies/pictures to an external drive (if you want to keep them), or delete them from your startup drive. Then, empty the Trash.
If you move them to an external, you will still have to delete them from the internal drive.
That won't fix Office (I don't think), but it will make everything run better. You need a minimum of 10GB free (more would be better).
You might need to reinstall Office. It should work without problem (well, at least as little problem as Office can muster).

My MAC no longer runs MS office 2008 Microsoft Error Reporting log version: 2.0 Error Signature: Exception: EXC_BAD_ACCESS Date/Time: 2015-02-01 23:38:19 0000 Application Name: Microsoft Excel Application Bundle ID: com.microsoft.Excel Application

My MAC no longer runs MS Office 2008
I get the following error message
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2015-02-01 23:38:19 +0000
Application Name: Microsoft Excel
Application Bundle ID: com.microsoft.Excel
Application Signature: XCEL
Application Version: 12.0.0.071130
Crashed Module Name: unknown
Crashed Module Version: unknown
Crashed Module Offset: unknown
Blame Module Name: unknown
Blame Module Version: unknown
Blame Module Offset: unknown
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0

If your startup disk says it is full, you need to remove some of your stuff.
Either move some documents/movies/pictures to an external drive (if you want to keep them), or delete them from your startup drive. Then, empty the Trash.
If you move them to an external, you will still have to delete them from the internal drive.
That won't fix Office (I don't think), but it will make everything run better. You need a minimum of 10GB free (more would be better).
You might need to reinstall Office. It should work without problem (well, at least as little problem as Office can muster).

Album, Version 0.2 error

Similar Messages

Maybe you are looking for