Alert mail configuration for backup / Oracle database

Hello All,
I am trying to configure alert mail for successful backup in the system and i have did with most of the configurations. The steps are as follows:
Configured mail in 000 client and also assigned mail id for a user
Configured the method CCMS_OnAlert_Email_V2 (set the parameters and its auto reaction method)
Configured the nodes CCMS Monitor templates -> Database -> Oracle -> Backup / restore -> backup status -> last brbackup run and last successful complete backup with the method CCMS_OnAlert_Email_V2 as mentioned in the SAP note 176492
And after these configurations we receive the mail successfuly. However there are few issues which i would like to get corrected / clarified. Whenever a backup is started i am receiving a mail stating that brbackup has been started and whenever a backup fails i am receving mail stating brbackup is failed with some return code. But i am not receiving any mail after successful completion of backup. Am i missing any configuraions here? Is this the standard one and other configurations required for mail on successful backup? Please suggest
Regards,
Anandh

When should a message trigger an alert?
1.Always (at every message): The Alert Monitor triggers a alert with the corresponding message value for every message.
2.Message value (color) has changed: The Alert Monitor only triggers an alert if the alert color of a reported message changes. For example, an alert is triggered if a red message follows a yellow message.
3.The message sent has changed: The Alert Monitor only triggers an alert if the color or severity of a message changes or if a new message is sent.
4.Never: The Alert Monitor does not trigger any alerts.
As your requirement, I would suggest it to be set to "Always"
Please let us know how it works.
Regards
Puneeth

Similar Messages

  • Can Jdeveloper Be Used For Non-Oracle Databases

    I have been trying to evaluate Jdeveloper 9i and Jbuilder 7 Enterprise for Swing database development. I am particularly interested in the productivity enhancements such as BC4J and Jclient. The underlying database might be Oracle, SapDb (excellent, easy to use, and free), SQLServer, etc.
    I evaluated Jbuilder Enterprise tools and it worked flawlessly with SapDb. This emphasized using their DataExpress and DbSwing components which provide many useful capabilities similar to BC4j and Jclient. It also involved using their DBPilot tool which allows browsing similar to that provided via a Jdeveloper connection.
    I tried to use Jdeveloper for the same SapDB and it is essentially non-functional. I followed the instructions for using a non-default driver and tried to define a connection. It behaved inconsistently: often saying no suitable driver can be found and yet when you edit the connection and test without making any changes, it works. If you try to establish a BC4J definition, it is very inconsistent and fails to recognize important details as foreign keys. Even if you define a ViewLink manually, it still does not work properly if you attempt to define a Master-Detail Jclient form. As I have stated, all these types of capabilities worked flawlessly in their Jbuilder equivalent. Furthermore, I really like the fact that Jbuilder gives many of BC4Js benefits without needing a BC4J J2EE container.
    Has anyone had real success using Jdeveloper's advanced features to develop for non-Oracle databases and if so, how did you get around these types of problems?

    Hi,
    generally, SCAN can be used for 10g databases and you discovered the first half: for 10g databases you will have to modify the REMOTE_LISTENER entry for each 10g database instance to point to the SCAN listeners (as opposed to pointing to the remote local listeners, which is the default in 10g). You could even have the databases registers themselves with SCAN and the remote listeners, if you wanted to... It's more or less a matter of configuration. But for simplification reasons, I will stick to the case where you have your 10g databases register with the SCAN listeners only.
    Now the other half is the client and the client configuration. An 11g Rel. 2 client configured for RAC would have a TNSNAMES entry that has only one address line for the RAC databases. The host entry in this one address line should point to the SCAN (the SCAN name is ideally resolved in DNS). A 10g client configured for RAC would have as many address lines in the TNSNAMES as you have nodes in the cluster.
    The 10g client SCAN configuration would then be in the middle so to speak: You would have 3 address lines in your TNSNAMES, in which each host entry would resolve to one SCAN address (I assume you will use the recommended default of 3 SCAN IPs). If you choose, you can have a name resolution for each of your SCAN IPs, but this would not be required. Now, why would you do it this way? Because this configuration will always work and does not make you dependent on certain functionality that your DNS server may or may not offer.
    For the remaining questions: SCAN is a DNS entry resolving one name to more than one (typically 3) IP addresses. OID is short for Oracle Internet Directory, which is a complete LDAP server. And you are right that there is no document how to configure 10g clients for SCAN from Oracle yet. However, there is a quite good document on SCAN on otn.oracle.com/rac, but I am sure you are aware of it already.
    Hope that helps. Thanks,
    Markus

  • Pagination support for non-Oracle databases?

    Hi,
    I just read this thread (Pagination Support on pagination support. Is there any way to get pagination with non-Oracle databases? We are using an IBM iSeries / AS/400 DB2 database right now, and we're planning to use some local lightweight database in the near future as well (probably Cloudscape/Derby or "IBM Everyplace database".)
    We currently use code like this:
    String sql = "SELECT art FROM Artikel art" +
                /* dynamically generated where statement is added here */
                + "ORDER BY art.artikelNummer";
    Query q = em.createQuery(sql);
    q.setFirstResult(firstResult);
    q.setMaxResults(maxResults);If I look in the TopLink logs, I see queries like this:
    SELECT ARTNR, ARALT, ARAFJ, ARXII, ARAVJ, ARXIV, ARANJ, AHGCD, ARNVJ, ARCRJ, ARARK, ARFKJ, ARTNK, ARGP1, ASGCD, ARGP2, ARPR1, ARGP3, ARPR2, AREX1, ARPR3, AREX2, ARPR4, AREX3, ARASA, ARINA, ASSCD, ARIA1, ARBAN, ARIN1, ARBAV, ARIA2, ARBAK, ARIN2, ARCES, ARIA3, ARCDT, ARIN3, ARCRE, ARIA4, ARCWK, ARIN4, ARHBH, ARIA5, ARDFA, ARIN5, ARDFG, ARIA6, ARDOS, ARIN6, AREPW, ARINN, ARFOD, ARIAS, ARFOE, ARINS, ARFOF, ARNAB, ARFOI, ARNIB, ARFON, ARNIA, ARFOS, ARNN1, ARFTA, ARNA2, ARVIV, ARNO2, ARGAP, ARNN3, ARGPT, ARNA4, ARGPD, ARNO4, ARGPA, ARNN5, ARGPO, ARNA6, ARHIS, ARNN6, ARISP, ARNIO, ARKHM, ARNNS, MAGCD, AROVJ, MTGCD, ARPL1, ARMXM, ARPL2, MRKCD, ARPL3, ARMVR, ARVKJ, ARMIM, ARV12, ARMDT, ARVVJ, ARMTE, AR#VR, ARMTU, ARZLS, ARMTM, ARIAT, ARMWK, ARAVS, MPCCD, ARNVS, ARBTW, ARFJS, ARXI2, ARG2S, ARXI3, ARE1S, ARXI4, ARE3S, ARXI6, ARIB1, ARXI1, ARIB2, ARXI5, ARIB3, AROPI, ARIB4, ARPRV, ARIB5, SZGCD, ARIB6, ARSPC, ARINO, ARSMF, ARIOS, VEAAN, ARNIS, ARSYN, ARNO1, ARVR1, ARNA3, ARV1S, ARNN4, ARVR2, ARNO5, ARV2S, ARNIN, ARVR3, ARNOS, ARV3S, ARP1S, ARTFA, ARP3S, ARTFG, ARS12, ARUVC, ARZLD, ARUCW, ARAJS, ARBKV, ARCJS, ARVVI, ARG3S, ARVVP, ARINB, VPOCD, ARIO2, VPECD, ARIO4, ARVIH, ARIO6, ARVHG, ARNBS, ARVRW, ARNN2, ARVPR, ARNA5, ARVVR, ARNAS, ARVVS, ARP2S, ARVV1, ARSVV, ARZK1, ARNJS, ARNA1, ARNO3, ARIO1, ARNO6, ARIO5, AROJS, ARE2S, ARVJS, ARIBS, ARIAD, ARIO3, ARG1S FROM ART WHERE ((((ARUVC = 'N') AND (ARHIS = 'N')) AND (ASGCD = 7)) AND (AHGCD = 15)) ORDER BY ARTNR ASC
    (Yeah, I know we have too much columns in the table...)
    So, no pagination in the query. As you can see, we have a mechanism in place to dynamically generate a where clause. This is because the user can set filters. The problem is, if our user sets a filter that causes the result set to be significantly smaller, the performance is way better than when he sets no filter at all. We suppose this is because the whole result set is sent to TopLink, regardless of the values of firstResult and maxResults.
    We are using TopLink Essentials 2.1-10, by the way.
    Message was edited by:
    Bart Kummel

    Hi all,
    I'm trying to subclass <tt>DatabasePlatform</tt> to add pagination support for the AS/400 DB2 database of my customer. To be fair, it is not going very well so far.
    The first problem is, the query Chris found by googling (Re: Pagination support for non-Oracle databases?), does not work for AS/400s version of DB2. In fact, although it is called "DB2", the database on the AS/400 system is a whole other database than the "normal" DB2 database that runs on Windows and *nix. The AS/400 DB2 simply does not have a "ROW_NEXT" function.
    Another option would be to use the <b>row_number() over()</b> mehtod. But, as can be read here, this function is only available from version V5R4 of OS/400. And guess what? We're stuck on V5R3 at this client. (We cannot upgrade, because there's an application in use that's written in Delphi and IBM dropped the Delphi binding from V5R4...)
    So I pretty much ran out of options. On the mailing list I linked to above, someone mentions the option to make a sort of stored procedure that generates a row count number. An example of how to do this can be found here. I implemented it, and ended up with this code:
    package com.myclientsname.persistence;
    import java.sql.Connection;
    import java.sql.PreparedStatement;
    import java.sql.ResultSet;
    import java.sql.SQLException;
    import org.eclipse.persistence.expressions.ExpressionBuilder;
    import org.eclipse.persistence.internal.databaseaccess.DatabaseCall;
    import org.eclipse.persistence.internal.expressions.ExpressionSQLPrinter;
    import org.eclipse.persistence.internal.expressions.SQLSelectStatement;
    import org.eclipse.persistence.internal.sessions.AbstractSession;
    import org.eclipse.persistence.logging.SessionLog;
    import org.eclipse.persistence.platform.database.DatabasePlatform;
    import org.eclipse.persistence.sessions.SessionProfiler;
    public class AS400Platform extends DatabasePlatform {
        private static final long serialVersionUID = 0L;
        public AS400Platform(){
             super();
             super.setShouldBindAllParameters(false);
        public void printSQLSelectStatement(DatabaseCall call, ExpressionSQLPrinter printer, SQLSelectStatement statement) {
            int max = 0;
            int firstRow = 0;
            if (statement.getQuery()!=null){
                max = statement.getQuery().getMaxRows();
                firstRow = statement.getQuery().getFirstResult();
            if ( !(max>0) && !(firstRow>0) ){
                super.printSQLSelectStatement(call, printer,statement);
                return;
            } else {
                statement.setUseUniqueFieldAliases(true);
                ExpressionBuilder builder = new ExpressionBuilder();
                statement.addField(builder.getField("COUNTER() AS CNTR"));
                printer.printString("SELECT * FROM (");
                call.setFields(statement.printSQL(printer));
                printer.printString(") AS R WHERE R.CNTR >= ");
                printer.printParameter(DatabaseCall.FIRSTRESULT_FIELD);
                if ( max > 0 ){
                    // Use of binding parameters is not allowed here, so use
                    // String concatenation instead...
                    printer.printString(" FETCH FIRST " + max + " ROWS ONLY");
            call.setIgnoreFirstRowMaxResultsSettings(true);
        public boolean wasFailureCommunicationBased(SQLException exception, Connection connection, AbstractSession sessionForProfile){
            if (connection == null || this.pingSQL == null){
                //Without a connection we are  unable to determine what caused the error so return false.
                //The only case where connection will be null should be External Connection Pooling so
                //returning false is ok as there is no connection management requirement
                    //If there is no ping sql then we can not perform the ping.
                return false;
            PreparedStatement statement = null;
            try{
                sessionForProfile.startOperationProfile(SessionProfiler.ConnectionPing);
                if (sessionForProfile.shouldLog(SessionLog.FINE, SessionLog.SQL)) {// Avoid printing if no logging required.
                     sessionForProfile.log(SessionLog.FINE, SessionLog.SQL, getPingSQL(), (Object[])null, null, false);
                statement = connection.prepareStatement(getPingSQL());
                ResultSet result = statement.executeQuery();
                result.close();
                statement.close();
            }catch (SQLException ex){
                try{
                    // Had to add this check because of NullPointerExceptions
                    // (maybe a bug?)
                    if(statement != null){
                        //try to close statement again in case the query or result.close() caused an exception.
                        statement.close();
                } catch (SQLException exception2) {
                    //ignore;
                return true;
            }finally{
                sessionForProfile.endOperationProfile(SessionProfiler.ConnectionPing);
            return false;
    }(As you can see, I had to override the <tt>wasFailureCommunicationBased()</tt> method as well, due to some unexpected NPE's. (A bug, perhaps?))
    This code does work. However, the performance is not very well. The first page comes relatively fast, but as you browse further in the table, each page comes slower. I assume this is because the counter() method has to be evaluated for each row in the table.
    I have to get the performance better and constant. Does anyone have an idea how to optimize this further?
    Best regards,
    Bart Kummel

  • Enterprise system for big oracle database and datawarehouse

    Hi
    i wana to implemnet System for Big Oracle Database that increase rapidly(monthly by 20 GB).
    what is the best and specification of the required servers.
    what is the best way to implemnet backup for my big database.
    what is required server to implement Datawarehouse.
    what others servers i need to implement applications that will interact with the big oracle database and Data Warehouse.
    Best Regards,
    Alaa

    Hi
    i wana to implemnet System for Big Oracle Database that increase rapidly(monthly by 20 GB).
    what is the best and specification of the required servers.
    what is the best way to implemnet backup for my big database.
    what is required server to implement Datawarehouse.
    what others servers i need to implement applications that will interact with the big oracle database and Data Warehouse.
    Best Regards,
    Alaa

  • Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

    Hi to all.
    Currently, i am trying to install patches for portal server.
    The server OS is Sun Solaris 8.
    We are using Oracle9iAS.
    Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
    We managed to install the patch, but have problem with the Post Install Action.
    We managed to run
    -ALTER SYSTEM ENABLE RESTRICTED SESSION;
    -@rdbms/admin/catpatch.sql
    -ALTER SYSTEM DISABLE RESTRICTED SESSION;
    -CONNECT / AS SYSDBA
    -update obj$ set status=5 where type#=29 and owner#!=0;
    -commit;
    But, when we come to the next command, which is to shutdown, it gives us like
    this..
    SQL> update obj$ set status=5 where type#=29 and owner#!=0;
    1402 rows updated.
    SQL> commit;
    Commit complete.
    SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01219: database not open: queries allowed on fixed tables/views only
    We tried to startup the database..it gives us this error..
    SQL> startup
    ORA-01081: cannot start already-running ORACLE - shut it down first
    So, we tried to shutdown again..
    SQL> shutdown immediate
    ORA-01089: immediate shutdown in progress - no operations are permitted
    I been informed that this is maybe a Database problem related. Any ideas?
    Best Wishes,
    Rushdan Md Saad.

    Patchsets could be obtained (only) from http://metalink.oracle.com
    You need to have valid CSI for access.
    P.S: Sorry Werner, I didn't see you post.
    Message was edited by:
    Ivan Kartik

  • 12c agent install fails with error - The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed

    Hi,
    I am trying to install 12c agent on windows 7 64 bit server by following m.note   .
    It is failing with Agent Configuration failed, please see below error message.
    INFO: length of temp is2
    INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
    INFO: ** Agent Port Check completed successfully.**
    INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
    INFO:
    INFO: perform - mode finished for action: configure
    INFO:
    INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
    INFO:
    INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
    INFO: Plugin homes:
    INFO: Plugin homes:
    INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
    SEVERE: ERROR: Agent Configuration Failed
    Thanks,

    Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
    -If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
    or if the system is part of some n/w group and has ip address assigned ?
    -Jdk 1.4 version is installed in your system
    -Enough free Disk space available in the system
    -How much RAM your system has which windows version you are using  ?
    -Is the DB is coming up properly ? its error related to this. check the logs.
    -If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
    Pls. update with your findings on above same , for the step next ...
    Thanks ,
    Uppal

  • What are the basic element of Base configuration of an oracle Database ?

    What are the basic element of Base configuration of an oracle Database ?

    889543 wrote:
    What are the basic element of Base configuration of an oracle Database ?check this link
    http://www.dbnest.com/entry/194/
    and if you want to configure oracle installation click below link .
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/install002.htm
    --neeraj                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Jdeveloper Team RE Jdeveloper 9.0.3 For Non-Oracle Databases

    I see that support for non-Oracle databases and Third-Party JDBC drivers is very improved. However, I have tried to use the SAPDb JDBC driver and the BC4J tester and generated Swing clients all display greyed so that no updates are possible. This appears to be a bug since Jbuilder works fine with this driver. However, I think Jbuilder's Express dataset and commit philosophy is really bad. Any commitments as to when this will be fixed?

    Yes, I examined the attribute settings and manually adjusted them in the entities and views. They are now updateable. Using Jdeveloper with SAPDB would be very tedious. Jdeveloper did not recognize foreign key constrains, primary keys, nor that attributes were updateable.
    Is there a way to include SAPDB in the testing? It is trivial to install and run and would make Jdeveloper a more robust tool. I do not like Jbuilder's approach to master-detail client screens and would recommend using Jdeveloper for this type of work if it could handle more databases like SapDb.

  • Have any GUI tools to backup oracle database(s) ?

    Hi,
    I want to know is any oracle's tool or third party tools to backuping oracle database?
    Thank you!
    Francis SZE

    Devotee wrote:
    Hi,
    I want to know is any oracle's tool or third party tools to backuping oracle database?
    Thank you!
    Francis SZE
    Use RMAN through enterprise manager
    Cheers

  • For preparing the filenames and paths for the oracle database files..

    Hi,
    I am preparing the filenames and paths for the oracle database files.....but I am not able to complete this one...Will you Please help for filling this one.
    Controlfile ---- > select name from v$controlfile;
    Redologfile -- > select member from v$logfile;
    Datafile --------- > select tablespace_name,file_name from dba_data_files order by 1;
    Tempfile --------> select tablespace_name,file_name from dba_temp_files;
    Spfile -----------> show parameter spfile
    Pfile --------------->
    Passwordfile ---->
    tnsnames.ora -->
    listener.ora------>
    sqlnet.ora ------>
    oratab ------------->
    Thanks
    Shiju

    orashiju wrote:
    Hi,
    I am preparing the filenames and paths for the oracle database files.....but I am not able to complete this one...Will you Please help for filling this one.
    Controlfile ---- > select name from v$controlfile;
    Redologfile -- > select member from v$logfile;
    Datafile --------- > select tablespace_name,file_name from dba_data_files order by 1;
    Tempfile --------> select tablespace_name,file_name from dba_temp_files;
    Spfile -----------> show parameter spfile
    Pfile --------------->spfile and pfile are located under $ORACLE_HOME/dbs/
    Passwordfile ----> passwordfile is located under $ORACLE_HOME/dbs
    tnsnames.ora -->
    listener.ora------>
    sqlnet.ora ------>all above files are under $ORACLE_HOME/network/admin
    oratab ------------->depends on operating system. Usualy under /etc/oratab

  • Step-by-step approach for "manual" Oracle Database Migration

    Hi All,
    I'm looking for a step-by-step approach for "manual" Oracle Database Migration. Basically, the minutes followed in a real-time production DB implementation.
    I assume the steps may vary for different setups. However any scenario-based docs will be of great help!

    The
    Oracle Upgrade Guide
    that comes with your download as far as I know is very detailed.

  • Hyperlink target connects from Outlook e-mail to file in Oracle database

    Greetings.
    Due to lack of permissions, I cannot create text file on the UNIX server.
    This will not be changed.
    I have stored the file in the Oracle 11g database.
    I want to send e-mail from PL/SQL with attached file.
    No UNIX scripts at all.
    It is a big file.
    Thought crossed my mind.
    Can I send e-mail from PL/SQL containing a hyperlink which connects to the file stored in the Oracle database ?
    The link target is a file stored in the Oracle database.
    Has anyone done this before?
    Let me know your ideas.
    Thank you.

    Oracle Freq wrote:
    I want to send e-mail from PL/SQL with attached file.
    No UNIX scripts at all.Can be done using UTL_SMTP or the newer UTL_MAIL.
    Attachments to e-mails are just that - the contents of the file is attached to the body of the mail. The mail arrives at its destination, the mail reader recognises the attachment and enables it to be saved to disk (or opened/viewed).
    This is standard stuff.. see MIME for details on how to construct a message body that includes attachments.
    Can I send e-mail from PL/SQL containing a hyperlink which connects to the file stored in the Oracle database ?
    The link target is a file stored in the Oracle database.Yes. You need a web server that has been configured with Oracle "+access+" - the default is using Oracle's Apache server that includes a module called mod_plsql. This module enables the web browser to use a URL that refers to a web enabled PL/SQL procedure in a specific database schema - and pass parameters (as part of the URL's query string) to the procedure.
    You can also use Oracle EPG (Extended Procedural Gateway I think is what the acronym means). This provides a web server directly inside the Oracle instance via the XDB (integrated XML database) option in Oracle. It too has a mod_plsql type module that provides an interface (via http) to web enabled PL/SQL procedures.
    This procedure can be a "+document download+" procedure. Oracle provides a system procedure called WPG_DOCLOAD.download_file()+ that you can use inside that web enabled PL/SQL procedure. This will return the contents of blob/clob as a "file" to the web browser.
    For example, a download web-enabled procedure will simplistically look something as follows:
    create or replace procedure downloadFile( fileName varchar2 ) is
            b       blob;
            mimeType varchar2(50);
    begin
            select
                file_content, mime_type  into b, mimeType
            from my_documents where file_name = fileName;
            OWA_UTIL.mime_header( mimeType, false );
            HTP.p('Content-Length: ' || DBMS_LOB.getlength(b));
            OWA_UTIL.http_header_close;
            WPG_DOCLOAD.download_file( b );
    end;The URL will look something like:
    http://my-webserver.my-domain.com:7777/pls/ora/scott.downloadfile?filename=somefile.docwhere:
    scott.downloadfile = name of PL/SQL procedure
    filename=somefile.doc = parameter name values to pass to procedure

  • How to backup Oracle Database Single Instance using RMAN

    Folks,
    Hello. I am using Oracle Database Server 11gR1 with Operating System Oracle Linux 5.10.
    I understand how to backup database instance in SQL Server with Windows. But don't really understand how to backup database instance in Oracle with Linux.
    I have done Cold backup and Hot backup for the database instance HRCS90 but both get the same error message.
    Cold backup is below:
    SQL> startup
    ORACLE instance started.
    Total System Global Area  538677248 bytes
    Fixed Size                  2146024 bytes
    Variable Size             528482584 bytes
    Database Buffers            4194304 bytes
    Redo Buffers                3854336 bytes
    Database mounted.
    Database opened.
    SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    RMAN> backup database;
    Starting backup at 25-NOV-13
    using target database control file instead of recovery catalog
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 11/25/2013 14:26:52
    RMAN-06171: not connected to target database
    RMAN> backup HRCS90
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: "archivelog, auxiliary, as, backup, backupset, blocks, channel, check, copy, copies, controlfilecopy, cumulative, current, database, datafile, datafilecopy, device, diskratio, db_recovery_file_dest, db_file_name_convert, duration, filesperset, for, format, from, full, force, file, incremental, keep, (, maxsetsize, nochecksum, noexclude, nokeep, not, proxy, pool, reuse, recovery, section, skip, spfile, skip readonly, setsize, tablespace, tag, to, validate"
    RMAN-01008: the bad identifier was: HRCS90
    RMAN-01007: at line 1 column 8 file: standard input
    RMAN> backup database HRCS90
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "identifier": expecting one of: "archivelog, auxiliary, backup, backupset, channel, copy, controlfilecopy, current, database, datafile, datafilecopy, delete, diskratio, db_recovery_file_dest, filesperset, format, from, force, file, include, keep, (, maxsetsize, noexclude, nokeep, not, pool, plus, reuse, recovery, section, ;, skip, spfile, skip readonly, setsize, tablespace, tag, to"
    RMAN-01008: the bad identifier was: HRCS90
    RMAN-01007: at line 1 column 17 file: standard input
    While the database instance HRCS90 is startup, I do hot backup using the same commands and get the same error message with above cold backup.
    My question is:
    Can any folk tell me the specific steps (command by command) to backup a single database instance in Oracle using RMAN ?
    Thanks.

    Folks,
    Hello. Thanks a lot for replying. My database instance named HRCS90 is going to be backed up. My backup directory is /backup_Database_Instance_HRCS90.
    If database in open state, we must back up in archive log. If database in mount state but not open, we can back up in noarchive log.
    I have tried to back up HRCS90 in archive and noarchive log when database in mount state but not open as below:
    SQL>startup mount;
    SQL>exit
    [user@linux bin]$./rman
    RMAN>connect target;
    RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backup_Database_Instance_HRCS90/full_%u_%s_%p';
    new RMAN configuration parameters:
    CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '/backup_Database_Instance_HRCS90/full_%u_%s_%p';
    new RMAN configuration parameters are successfully stored
    released channel: ORA_DISK_1
    RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 360 DAYS;
    new RMAN configuration parameters:
    CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 360 DAYS;
    new RMAN configuration parameters are successfully stored
    RMAN> backup as backupset database plus archivelog;
    Starting backup at 01-DEC-13
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=44 device type=DISK
    specification does not match any archived log in the recovery catalog
    backup cancelled because all files were skipped
    Finished backup at 01-DEC-13
    Starting backup at 01-DEC-13
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting full datafile backup set
    channel ORA_DISK_1: specifying datafile(s) in backup set
    input datafile file number=00001 name=/u01/oradata/HRCS90/system01.dbf
    input datafile file number=00090 name=/u01/oradata/HRCS90/psimage.dbf
    input datafile file number=00060 name=/u01/oradata/HRCS90/gpapp.dbf
    input datafile file number=00119 name=/u01/oradata/HRCS90/tlwork.dbf
    input datafile file number=00102 name=/u01/oradata/HRCS90/pttlrg.dbf
    input datafile file number=00054 name=/u01/oradata/HRCS90/faapp.dbf
    input datafile file number=00110 name=/u01/oradata/HRCS90/saapp.dbf
    input datafile file number=00101 name=/u01/oradata/HRCS90/pttbl.dbf
    input datafile file number=00002 name=/u01/oradata/HRCS90/sysaux01.dbf
    input datafile file number=00106 name=/u01/oradata/HRCS90/py0lrg.dbf
    input datafile file number=00004 name=/u01/oradata/HRCS90/psdefault.dbf
    input datafile file number=00117 name=/u01/oradata/HRCS90/tlapp.dbf
    input datafile file number=00007 name=/u01/oradata/HRCS90/adapp.dbf
    input datafile file number=00082 name=/u01/oradata/HRCS90/paapp.dbf
    input datafile file number=00074 name=/u01/oradata/HRCS90/hrsapp.dbf
    input datafile file number=00092 name=/u01/oradata/HRCS90/ptamsg.dbf
    input datafile file number=00056 name=/u01/oradata/HRCS90/fgapp.dbf
    input datafile file number=00114 name=/u01/oradata/HRCS90/stapp.dbf
    input datafile file number=00005 name=/u01/oradata/HRCS90/aaapp.dbf
    input datafile file number=00118 name=/u01/oradata/HRCS90/tllarge.dbf
    input datafile file number=00009 name=/u01/oradata/HRCS90/avapp.dbf
    input datafile file number=00065 name=/u01/oradata/HRCS90/hrapp2.dbf
    input datafile file number=00078 name=/u01/oradata/HRCS90/hrwork.dbf
    input datafile file number=00116 name=/u01/oradata/HRCS90/stwork.dbf
    input datafile file number=00077 name=/u01/oradata/HRCS90/hrswork.dbf
    input datafile file number=00115 name=/u01/oradata/HRCS90/stlarge.dbf
    input datafile file number=00049 name=/u01/oradata/HRCS90/epapp.dbf
    input datafile file number=00098 name=/u01/oradata/HRCS90/ptprc.dbf
    input datafile file number=00037 name=/u01/oradata/HRCS90/eoewapp.dbf
    input datafile file number=00032 name=/u01/oradata/HRCS90/eoecapp.dbf
    input datafile file number=00086 name=/u01/oradata/HRCS90/piapp.dbf
    input datafile file number=00099 name=/u01/oradata/HRCS90/ptprjwk.dbf
    input datafile file number=00019 name=/u01/oradata/HRCS90/cularge.dbf
    input datafile file number=00035 name=/u01/oradata/HRCS90/eoeiapp.dbf
    input datafile file number=00045 name=/u01/oradata/HRCS90/eoppapp.dbf
    input datafile file number=00076 name=/u01/oradata/HRCS90/hrslarge.dbf
    input datafile file number=00044 name=/u01/oradata/HRCS90/eoltapp.dbf
    input datafile file number=00094 name=/u01/oradata/HRCS90/ptappe.dbf
    input datafile file number=00050 name=/u01/oradata/HRCS90/eplarge.dbf
    input datafile file number=00084 name=/u01/oradata/HRCS90/pcapp.dbf
    input datafile file number=00111 name=/u01/oradata/HRCS90/sacapp.dbf
    input datafile file number=00100 name=/u01/oradata/HRCS90/ptrpts.dbf
    input datafile file number=00023 name=/u01/oradata/HRCS90/eobfapp.dbf
    input datafile file number=00096 name=/u01/oradata/HRCS90/ptcmstar.dbf
    input datafile file number=00108 name=/u01/oradata/HRCS90/pylarge.dbf
    input datafile file number=00016 name=/u01/oradata/HRCS90/cularg1.dbf
    input datafile file number=00018 name=/u01/oradata/HRCS90/cularg3.dbf
    input datafile file number=00025 name=/u01/oradata/HRCS90/eocmapp.dbf
    input datafile file number=00027 name=/u01/oradata/HRCS90/eocmwrk.dbf
    input datafile file number=00029 name=/u01/oradata/HRCS90/eoculrg.dbf
    input datafile file number=00033 name=/u01/oradata/HRCS90/eoeclrg.dbf
    input datafile file number=00036 name=/u01/oradata/HRCS90/eoeilrg.dbf
    input datafile file number=00039 name=/u01/oradata/HRCS90/eoewwrk.dbf
    input datafile file number=00041 name=/u01/oradata/HRCS90/eoiulrg.dbf
    input datafile file number=00046 name=/u01/oradata/HRCS90/eopplrg.dbf
    input datafile file number=00048 name=/u01/oradata/HRCS90/eotplrg.dbf
    input datafile file number=00053 name=/u01/oradata/HRCS90/erwork.dbf
    input datafile file number=00061 name=/u01/oradata/HRCS90/gpdeapp.dbf
    input datafile file number=00072 name=/u01/oradata/HRCS90/hrlarg1.dbf
    input datafile file number=00079 name=/u01/oradata/HRCS90/htapp.dbf
    input datafile file number=00087 name=/u01/oradata/HRCS90/pilarge.dbf
    input datafile file number=00120 name=/u01/oradata/HRCS90/waapp.dbf
    channel ORA_DISK_1: starting piece 1 at 01-DEC-13
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup plus archivelog command at 12/01/2013 17:52:45
    ORA-19504: failed to create file "/backup_Database_Instance_HRCS90/full_0boqei2c_11_1"
    ORA-27040: file create error, unable to create file
    Linux-x86_64 Error: 13: Permission denied
    RMAN>
    RMAN>
    RMAN>
    RMAN>
    RMAN> backup as backupset database;
    Starting backup at 01-DEC-13
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting full datafile backup set
    channel ORA_DISK_1: specifying datafile(s) in backup set
    input datafile file number=00001 name=/u01/oradata/HRCS90/system01.dbf
    input datafile file number=00090 name=/u01/oradata/HRCS90/psimage.dbf
    input datafile file number=00060 name=/u01/oradata/HRCS90/gpapp.dbf
    input datafile file number=00119 name=/u01/oradata/HRCS90/tlwork.dbf
    input datafile file number=00102 name=/u01/oradata/HRCS90/pttlrg.dbf
    input datafile file number=00054 name=/u01/oradata/HRCS90/faapp.dbf
    input datafile file number=00110 name=/u01/oradata/HRCS90/saapp.dbf
    input datafile file number=00101 name=/u01/oradata/HRCS90/pttbl.dbf
    input datafile file number=00002 name=/u01/oradata/HRCS90/sysaux01.dbf
    input datafile file number=00106 name=/u01/oradata/HRCS90/py0lrg.dbf
    input datafile file number=00004 name=/u01/oradata/HRCS90/psdefault.dbf
    input datafile file number=00117 name=/u01/oradata/HRCS90/tlapp.dbf
    input datafile file number=00007 name=/u01/oradata/HRCS90/adapp.dbf
    input datafile file number=00082 name=/u01/oradata/HRCS90/paapp.dbf
    input datafile file number=00074 name=/u01/oradata/HRCS90/hrsapp.dbf
    input datafile file number=00092 name=/u01/oradata/HRCS90/ptamsg.dbf
    input datafile file number=00056 name=/u01/oradata/HRCS90/fgapp.dbf
    input datafile file number=00114 name=/u01/oradata/HRCS90/stapp.dbf
    input datafile file number=00005 name=/u01/oradata/HRCS90/aaapp.dbf
    input datafile file number=00118 name=/u01/oradata/HRCS90/tllarge.dbf
    input datafile file number=00009 name=/u01/oradata/HRCS90/avapp.dbf
    input datafile file number=00065 name=/u01/oradata/HRCS90/hrapp2.dbf
    input datafile file number=00078 name=/u01/oradata/HRCS90/hrwork.dbf
    input datafile file number=00116 name=/u01/oradata/HRCS90/stwork.dbf
    input datafile file number=00077 name=/u01/oradata/HRCS90/hrswork.dbf
    input datafile file number=00115 name=/u01/oradata/HRCS90/stlarge.dbf
    input datafile file number=00049 name=/u01/oradata/HRCS90/epapp.dbf
    input datafile file number=00098 name=/u01/oradata/HRCS90/ptprc.dbf
    input datafile file number=00037 name=/u01/oradata/HRCS90/eoewapp.dbf
    input datafile file number=00032 name=/u01/oradata/HRCS90/eoecapp.dbf
    input datafile file number=00086 name=/u01/oradata/HRCS90/piapp.dbf
    input datafile file number=00099 name=/u01/oradata/HRCS90/ptprjwk.dbf
    input datafile file number=00019 name=/u01/oradata/HRCS90/cularge.dbf
    input datafile file number=00035 name=/u01/oradata/HRCS90/eoeiapp.dbf
    input datafile file number=00045 name=/u01/oradata/HRCS90/eoppapp.dbf
    input datafile file number=00076 name=/u01/oradata/HRCS90/hrslarge.dbf
    input datafile file number=00044 name=/u01/oradata/HRCS90/eoltapp.dbf
    input datafile file number=00094 name=/u01/oradata/HRCS90/ptappe.dbf
    input datafile file number=00050 name=/u01/oradata/HRCS90/eplarge.dbf
    input datafile file number=00084 name=/u01/oradata/HRCS90/pcapp.dbf
    input datafile file number=00111 name=/u01/oradata/HRCS90/sacapp.dbf
    input datafile file number=00100 name=/u01/oradata/HRCS90/ptrpts.dbf
    input datafile file number=00023 name=/u01/oradata/HRCS90/eobfapp.dbf
    input datafile file number=00096 name=/u01/oradata/HRCS90/ptcmstar.dbf
    input datafile file number=00108 name=/u01/oradata/HRCS90/pylarge.dbf
    input datafile file number=00016 name=/u01/oradata/HRCS90/cularg1.dbf
    input datafile file number=00018 name=/u01/oradata/HRCS90/cularg3.dbf
    input datafile file number=00025 name=/u01/oradata/HRCS90/eocmapp.dbf
    input datafile file number=00027 name=/u01/oradata/HRCS90/eocmwrk.dbf
    input datafile file number=00029 name=/u01/oradata/HRCS90/eoculrg.dbf
    input datafile file number=00033 name=/u01/oradata/HRCS90/eoeclrg.dbf
    input datafile file number=00036 name=/u01/oradata/HRCS90/eoeilrg.dbf
    input datafile file number=00039 name=/u01/oradata/HRCS90/eoewwrk.dbf
    input datafile file number=00041 name=/u01/oradata/HRCS90/eoiulrg.dbf
    input datafile file number=00046 name=/u01/oradata/HRCS90/eopplrg.dbf
    input datafile file number=00048 name=/u01/oradata/HRCS90/eotplrg.dbf
    input datafile file number=00053 name=/u01/oradata/HRCS90/erwork.dbf
    input datafile file number=00061 name=/u01/oradata/HRCS90/gpdeapp.dbf
    input datafile file number=00072 name=/u01/oradata/HRCS90/hrlarg1.dbf
    input datafile file number=00079 name=/u01/oradata/HRCS90/htapp.dbf
    input datafile file number=00087 name=/u01/oradata/HRCS90/pilarge.dbf
    input datafile file number=00120 name=/u01/oradata/HRCS90/waapp.dbf
    channel ORA_DISK_1: starting piece 1 at 01-DEC-13
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 12/01/2013 17:56:51
    ORA-19504: failed to create file "/backup_Database_Instance_HRCS90/full_0coqeia5_12_1"
    ORA-27040: file create error, unable to create file
    Linux-x86_64 Error: 13: Permission denied
    As we see the above last 2 commands, either archive or noarchive, I get the same error:
    Archive: ORA-19504: "failed to create file /backup_Database_Instance_HRCS90/full_0boqei2c_11_1"
    Noarchive: ORA-19504: "failed to create file /backup_Database_Instance_HRCS90/full_0coqeia5_12_1" 
    My question is:
    What is the file "full_0boqei2c_11_1" or "full_0coqeia5_12_1" ?  How to solve the above error ?
    Thanks.

  • Do i need the POST-INSTALLATION configuration for linux+oracle?

    hello
    i install the oracle10g on redhat9 box,JUST finish the installation,i open the Terminal windows,type ¨sqlplus¨ command,linux tell me ¨commnd not found¨. i guest the installer don´t set the env variable(in windows operating system,the installer automatically set the path variable during the install procedure).
    i can SUCCESSFULLY access the browser console of em and isqlplus.
    but after i restart the redhat,the browser can´t access both
    em and isqlplus(connection reset).when i telnet the 5500 and 5560 port,i found that they haven´t be open.and i suspect that the oracle database haven´t been automatically started.
    question 1:how can i MANUALLY start oracle after i restart the linux?
    question 2:how can i config the oracle after the install to make it work perminently?or post-install configuration.
    thank you very much!

    Oracle will not start automatically. You have to enter as oracle user and start the listener manually and then the database .
    Command are like : lsnrctl start
    Then , type svrmgrl ( the server manager console ) , connect internal , and then startup .
    Later on you can write scripts for automatic startup of the database and listener .
    G J Shankar Nath
    Deputy System Manager
    GNRC Limited

  • Help for corrupted oracle database

    I look for help of a corrupted  oracle database
    I have a SAP ECC60 with Oracle 11g.
    The system is running but a backup to not work because of corrupted data-files in the database.
    2 datafiles are not accessable. (data error (cyclic redundancy check)
    It is no valid backup avaible for the database.
    One problem is the license of the database. The SAP-Licensed database do not support Blockmedia-Revory ( Enterprise Edition is needed ).
    Is it possible to get a backup of the corrupted databse anyway.
    Help would be grateful
    Best regards
    Willi

    rxdr wrote:
    When I downloaded the 2.2 update, somehow it wiped the whole file that lets my sd card communicate with my phone. I have done 6 hard resets and I do not have the ability to see photos or music on my phone, Also there are none of the functions that allow me to use music player.  When I choose that app it says no music available and there are no buttons that allow me do anything (menu key gone,etc).All the preloaded pics and music are no longer on phone or on sd card. The file emmc which I think (?) might control these function is empty. Anybody got any help and if so could you walk me through it because customer support & HTC cannot seem to figure it out? I downloaed OI file manager and some of  my music shows up and I can see no pics (wiped them all) and I can see the 6 songs I put on phone from my computer but I cannot play them. Suggestions?
    Had the same problem with my wife's phone when the Froyo 2.2 came in:  fried her sd card.  We ended up just buying a new one ... cost me $9 and the headache was over!

Maybe you are looking for

  • How can I setup a Deskjet 3050a/J611 to my Chromebox?

    HP Deskjet 3050a-J611. - Setup the printer, and once on, it printed the alignment page. - Went through the menu on the printer, but it has no option to print the "information sheet." All I could get it to print is the configuration sheet, which has n

  • Is there a way to limit how much music stays on iphone?

    I use iTunes Match, and it's great. But, I use the phone for other stuff, and those apps need space. Is there a way to limit how much the Music app stores before it throws away the old songs? Rephrasing the question, when using match, is there any wa

  • Bank Balance Report

    Hi all, i created one Query for Bank Balance ,but its showing errors .so kindly suggested me how to make CR report for Bank balance. declare @FromDate datetime declare @ToDate datetime set @FromDate={?FromDate} set @Todate={?ToDate} Select a.Account,

  • Error when converting time stamp in date time time zone CST  in IC

    Hi Experts, We have recently upgraded from CRM 5.0 to CRM 2007. We are using IC WEB Employee interaction center. so when agent create service ticket in interaction center and close the ticket on same day we are getting an error saying Error when conv

  • Problem ./sapinst when install IDES MILL PRODUCTS 2009

    Hi all Server HP CPU Intel OS : RHEL 4 Update 7  32bit java version "1.4.2_12" Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03) Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode) Previously, I had installed on this serve