Alert message when battery is low?

This is only a minor problem really, but it's irritating all the same. As well as getting the usual visual message when my battery's low, when another 2 or 3% has gone I also get an audio alert too (saying "Alert!" or "Attention!"). I've turned VoiceOver off, I have Speakable Items off and the "Announce when alerts are displayed" (in System Preferences --> Speech) box is unchecked. The battery being low is also the only thing I'm alerted to in this way.
Any help would be appreciated in how to fix this.

Is your cradle plugged in to AC power or a USB port? If the charge is very low on the phone, it needs to be plugged in to an AC power source to charge.

Similar Messages

Memory full error message when battery is low

(Ive done a check and cant find anything similar)
I have an E71 and keep getting "memory full" error messages ONLY when the battery is low. I have 109 free memory out of 119, and when I connect to the USB it says it doesnt recognise it, so I cant save anything to computer, not that there is anything on there.
The problem is, because it says MEMORY FULL, it wont recharge, even when the charger is plugged in and switched on. Which means basically the phone is useless.
I think this has to be a softwear problem and not a Ive-misused-it-problem because the MEMORY FULL ! message comes up only with low battery.

Hi have you checked if your 920 memory is full via the Settings > Phone Storage to ensure that your 920 has got enough memory? Otherwise, have you checked your car stereo itself (is it a model that has built-in flash storage or hard drive storage) for its memory capacity?

Audio popping when battery run low. Help !!

Hi there,
I have a macbook pro 13" late 2011 with OSX Lion, 8 Gb Ram and 2,4 Ghz i5 cpu.
I'm a producer/composer so I use mt mac a lot for audio.
My problem is that whatever I'm doing, if I'm using ableton or maschine or logic, when battery is low and the low battery message appears on the screen,
my cpu meter goes very high (red) and it's impossible keep on working: audio starts popping and running slow so much that is impossible even understand what track is playing.
So when I start to charge it it comes back and starts working properly.
I don't understand why it happends only when the battery low message on the screen appears.
It happends even if I use vlc playing an mp3.
Any help please ???

sanjampet wrote:
Roblars,
As Csound1 said keep the battery charged, or better still, use the power supply.
I do production as well, and I think that Csound1 does as well,
Yes, I do.
I would not even think of working on any project on battery for more than :30m.
No power from battery= all kinds of artifacts and errors.
I never work on battery, performance is reduced.
Hi there

Regarding the alert Message when i try to close the window

Hi All,
I am trying to give the alert message when the user tries to close the window.
For this i have coded a jsp in which i have written
<html>
<head>Test in the Page Ajay</head>
<body onUnload="alert('Test UnLoad')">
</body>
</html>
and in the portalapp.xml i have given as jspnative.
then if i try to unload the page the alert message is not executing.
Plz help me out in this.
Thanks
Ajay

Delete the iPod photo cache, as described here:
http://support.apple.com/kb/ts1314

Need alert message when closing the file

Hi friends,
One of my friend has an forgetting habit, always forgets some important things to check before delivering the files. So thought of developing some scripts for him and did a couple. He was happy with that but still not upto the mark. The scripts I gave needs to click in the scripts panel. He still forgets to click the scripts in the rushing deadlines. This time I am thinking of something but I have no solution/answer. I'm planning to give an alert message box whenever he closes/exits the file. That is when he is done with the job and he says Ctrl+W or File-Close or Exit, he should see an alert message to check some things which are really imporatant. Writing scripts needs to click them, which he is missing in rush deadlines.
So can we create anyscript which is attached to the system close command? or Edit the default system close command so that he will not miss anything? I know this is crazy but just want to help him.
Your help is really appreciable!!

in CS3 you can use Event Listener
and example of AfterSave
http://www.adobeforums.com/webx?128@@.59b4b8e6
robin
www.adobescripts.com

HP Pavilion g6 Notebook - Sudden shutdowns without warning when battery is low

My notebook is only ten months old. Within the last week, it started shutting down unexpectedly when the battery was low (but not at a critical level). If I try to restart it, there won't be a response until I plug in the adaptor cord. Usually there will be around 20% of my battery left when my computer is booted up after such a shutdown, so I don't think it's because of my battery being low. (Besides, when I've accidentally used my laptop until it has to hibernate, the light next to the port for the adapter cord usually blinks to tell me it's the battery.)
Initially I thought it was a problem with overheating, so I cleaned my vents and bought an external laptop cooler when it first shut down unexpectedly two weeks ago. However, the shutdowns have become more frequent since then. I've run the Memory Diagnostic Tool, the HP Battery Check, and updated my BIOS. No problems have come up; in fact, everything seems to be running perfectly. I also ran AVG and Malwarebytes Anti-Malware. No problems there either.
What could be the problem? Thanks for any help!
Product name: HP Pavilion g6 Notebook PC
Product number: A1J18AV
Windows 7 Home Premium 64-bit Service Pack 1

Mines started doing exactly the same! Its just 12 months old though and hardly ever gives me a low battery warning. Then it will turn off without shutting down the proper way. When I plug in and turn back on, the battery says its at 20-25%
Is there actually a solution to this and whats causing it?..because if it's the battery then **bleep**..they don't last long.

MBP shuts off by itself when battery is low

Just recently my MBP has started to shut itself off within 10 seconds of displaying the low battery warning. It's as if someone took the battery out of the computer. I can start up the computer fine after I plug it in, and once charged the battery will power the laptop just fine until it gets low again. The problem repeats itself when the battery gets low again. I've been on 10.5.3 less than a few days, and before I made the update I never had this problem. Any ideas as to what's causing this?

Try this: Shut down your computer, take out the battery and power cord and pres the power button for about 10 seconds. After that, reseat the battery (and power cord if necessary) and turn on the computer whilst holding down Command-Option-P-R. Wait until you hear the startup chime AT LEAST once after the initial chime. What you just did is a reset of SMC and pram.
After that calibrate the battery by fully charging it, use the computer on power supply for at least 2 hours. Then unplug it and use it off battery power until it completely runs down. Let it stand for at least 5 hours and plug it back in.
Hope this helps

Suppressing alert message when records exist

I have a block B - ret_print where the user can see the records entered from block A - ret_view. I want to add a message to a button in block A when there are no records to see in block B. I tried the code below with WHEN-BUTTON-PRESSED trigger in block A but get the alert even when there is a record to view in block B. How can I write this so that the alert does not show when records exist to view? Thanks!
if (:ret_print.card_no is null) then
alert_for_val('stop_alert', 'There Are
No Records To View.');
raise form_trigger_failure;
else
go_block('ret_print');
execute_query;
end if;

In the original post ret_print is block B.
My interpretation of the problem is that the form needs to know how many records will be retrieved by a query in block B before it actually does the query. One way to do this would be to do a SQL select and then do execute_query if records exist. Or you could turn the problem on its head as I did in my earlier post - use execute_query to see if records exist and override the default message if there are none found.

Auto reboots when battery is lower than 50%

Hi, I have my 4s 16gb from this year Jan. I knew that Iphone 4S long have a problem with the battery. It is horrible but recently my unit will auto reboot when the battery is lower than 50%............ which I can only use my phone with 3G for 4 h then have to recharge........... Plz help!!!

JUst in windows or osx too?

Computer Shuts Down When Battery Gets Low

I have a few interconnected issues and one peripheral issue:
1) When battery charge gets down to between 20% and 10%, by MacBook shuts off. It doesn't go to sleep. It just shuts off.
2) Battery loses charge quickly (I get about 1.5 hours of use out of it, which is no good for a machine that's a year old, right?)
3) I think the machine runs to hot and fan gets too loud.
The above all occur when set for "better battery life" and when doing light web surfing, ichat, and playing music in itunes. I did the firmware update and no change to these problems.
Then there's this...
4) Distorted screen, specifically horizontal green lines, when trying to watch a DVD through FrontRow.
Anyone experience this? I just am curious what to expect before I take the machine in...again (it was treated for RSD).
MacBook Mac OS X (10.4.6)

I'm running on battery now.. saving all my work diligently pretty much every minute on the minute... currently 1hr 42mins remaining of battery life - so it says.
This compleatly unnanounced shut-down has happened twice to me now, and it's very disconcerting. This is the only problem I've ever had with my MacBook (bought it August last year) and is annoying as I KNOW it was this 'update' is responsible. I lost about 40 mins of work because of this yesterday and am pretty annoyed about it frankly. My battery seemed fine before hand - I actually was typing away happily on it in the back of a four hour car journey just last week, eeking out the charge by turing the screen right down etc. SURELY if this is known, and is obviously software/firmware created, Apple can offer a similar patch to correct it??
I'm in the UK and a day-trip away from any Apple Store. Do I have to phone Apple and ask for a replacement battery? Is that how it works (like I said - I've never had technical difficulties with my MacBook previously). I searched the site and found this number: 0870 876 0753, I think that's right. What should I have ready on the phone?
REALLY hope this can get sorted soon as I can't really trust the machine at the moment without it being plugged in, making taking it out anywhere (which is why I got it - and loved it) pretty redundant.

M2 Not Charging when Battery is Low

Keep us updated.

I recently took delivery of my M2 and am generally very pleased with it. However, I'm encountering a problem when the battery charge is low. It doesn't seem to take charge when I plug it in. It recognises that a charger is connected, as in tries to go into night mode and stops showing the "Connect your charger" message, but it doesn't actually CHARGE - no notification icon or light, battery keeps draining. Ultimately, the battery goes dead and the phone shuts down.Then, as "expected", it takes a few moments to show that it is charging, and eventually the light comes on and charge happens. This seems to only happen when the charge is low before I plug it in. If there is more than minimal charge, then it charges OK. It's a bit of a problem that I can't charge the phone when the charge is low..... Any ideas?

IPhone 3G won't charge from car adapter when battery is low

I regularly use my Griffin car charger to charge my iPhone 3G. It seems to work well most of the time.
When my iPhone 3G is very low on battery charge, I discovered that the the iPhone will no longer charge via the car charger. Only way I can recharge the iPhone is via the cable connected directly to my computer or via the wall adapter.
Is this a normal behavior? Very unfortunate if it is since forcing a mobile user to connect to a wall outlet or a computer makes no sense.

Copied from my previous post in this thread.
I know if the iPhone's internal temperature if over a designated temp, you can't charge the battery until the internal temp has been reduced. This is protection for the battery and internal components since charging increases the internal temp.
When this occurs, the charging indicator will switch to showing as being fully charged.
Are you using a case?
Charging increases the internal temp of the iPhone, and using GPS will also increase the internal temp of the iPhone. Combined must have increased the internal temp of your iPhone past the designated temp when charging stops. Using a case can prevent heat from being dissipated properly.

Report - Alert Message when Link with value 0 is clicked

Hi,
I have a report with many fields eg. Year , Count of High Priority Project , Count of Medium Priority Project , Count of Low Priority Project.
I have used Column Attributes to link the report data to page 22.
Now , some of the cells in the report have 0 . Is it possible that when user click on 0 the link does not take to page 22 , but show javascript alert window stating no data.
Any help will be highly appreaciated.
Regards,
Shijesh

Thanks Denes for the reply.
I'm sorry that i was not able to explain my question clearly.
Below is a bare minimum version of my report.
[http://www.geocities.com/shijeshkumar/Untitled.png]
I have a table say dummy_project with field Year , Priority ( it can have only any of these three value - High Medium and Low ) and Project_Status ( it can have only any of these three value - Red , Green and Yellow ) --- As you can see value of the field has been used as Column Lable ( eg. High , Low and Medium ) --
now when user click on first cell which has value 1 -- It pass the High Column Lable , Priority (High value is in priority field of dummy project table) , and Year to Page 22.
Since my original report contains 17 fields, it will be very difficult for me to include hyperlink in the query.
Is there any other way to make my hyperlink conditional , when it has 0 value there should be no hyperlink ...
If i use the method which is metioned in the link it will work as I want but the code will become to lenghty and hard to debug ( Condidering there are 17 column) and each column is derived using decode and case and other conditions....
Edited by: Shijesh Kumar on Jan 16, 2009 5:13 AM

When battery is low, doesn't want to charge?

So, sometimes, and it seems to happen more when the battery is already below 20 or 10%, I put it on the charger over night, and the next morning it's displaying the battery on the screen still at red - (I guess when things are going well during a recharge, the screen shuts off)
At first I thought it was a cheap retractable synch cord I was using, but this has happened twice now with the official white cradle as well - and I took extra care to make sure it was properly seated before I went to sleep.
Luckily, putting it on a Altec-Lansing pair of speakers lets it charge most of the way in a hurry... but what's going on with just putting a low battery phone on the cradle??

Is your cradle plugged in to AC power or a USB port? If the charge is very low on the phone, it needs to be plugged in to an AC power source to charge.

Random flashing screens when battery is low.

i bought my girlfriend an ipod nano (white 4GB) for Christmas last year. This Christmas the battery life started to degenerate to almost zero. As the battery life would go down the ipod would begin to flash random screens, such as the apple screen, the sad face, the low battery, the exclamation mark with file, the do not disconnect, and the charging screen. Then when connected to the computer the screens begin to slow down, and then it will return to normal as the ipod begins to get a charge until they completely stop when the ipod is fully charged. I think I just need to get the battery replaced but I don’t want to spend the money if there is something very major wrong with the ipod and I just need to buy a new one. Any advice would be great.

Is your cradle plugged in to AC power or a USB port? If the charge is very low on the phone, it needs to be plugged in to an AC power source to charge.

Alert message when battery is low?

Similar Messages

Maybe you are looking for