Alert Subscription : I do not see the Alert categories

Bonjour a vous tous et toutes,
I am getting all the alerts in my AlertInbox (MBA & CCMS).
However, when i use the Subscription button (in the AlertInbox page), i do no see my alert categories ...
I have (for each of my alert category) added a role - using the alrtcatdef transaction - in the subscription authorization panel,
Am i missing something ?
Thank in advance !
MO A+

Hi Aamir,
First Bonjour a tous et a toutes, is the english equivalent of Hello to all, but inclunding mens & womens
Second, this is a very old note (2004). We are on PI 7.0 SP12.
All my alerts are working fine, except that when i click on the Subscription button in the AlertInbox BSP pages, the (subscriptions page launch correctly - no error), but no categories are shown ...
Thank in advance !
MO A+

Similar Messages

Cisco Unified Operation Manager: can not see the Campus manager

Dear all,
I have installed the CUOM to manage my IPT system. I have successfully installed without any errors. The system now can detect all IPT system components but I have a problem. From the Tool on Service Level View, I only the option for Alert History and can not see the option for Campus manager to customize the topology (like the tool on Ciscoworks LMS).
Please give me some advices.
Thank you,
Thanh

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

As of yesterday, calendar subscribers are no longer getting event alerts. We are not exceeding the limits for number of calendars

As of yesterday, calendar subscribers are no longer getting event alerts. We are not exceeding the limits for number of calendars, and have not installed new hardware or software. What else could be causing this, and how do I fix it? This is critical!

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

How to see the alerts

Hi,
in OEM 9.2.0 , how to see the alerts ( or the errors indicated in alertlog) and the problems and errors if any on the databases ?
Many thanks.

If you want to check quickly, you find the alert log in the BACKGROUND_DUMP_DEST location specified in the initialisation parameter of the database.
e.g D:\oracle\admin\ugonicdb\bdump.

Super users able to approve but not receive the alerts.

Hello,
When our customer logs into SAP Business One they get loads of alerts regarding approvals as they are in the approval list.
The customer was asking, if they remove themselves from the list of approvals so that they do not get the alerts. As a super user could they still be able to go into approvals to approve. The user was a super user.
This was tested, the result of which showed that if they were to take off their approvals they would not get the message but also they would not be able to approve either.
The customer suggested that this would be a useful addition to SAP if super users could go in to approve but not get all the alerts related to approvals.
Regards,
Andy

Hi,
Account to your description, one your test Exchange account
with POP mode cannot receive emails. If I misunderstand your meaning, please feel free to let me know.
If yes, I’d like to confirm if the issue happens internally or externally. And I also recommend the following troubleshooting:
Check if it can receive emails when you configure the account without POP or IMAP mode.\
Restart your IIS.
Check if the issue happens on others.
Thanks,
Angela Shi
TechNet Community Support

HT4623 I do not see the option for software update in my general settings?

I have an iPad 2 and I am trying to update to iOS 6 but do not see the software update option in general setting

IPhone, iPod Touch, and iPad iOS Compatibility
     Device                                       iOS Verson
iPhone 1                                       iOS 3.1.3
iPhone 3G                                    iOS 4.2.1
iPhone 3GS                                 iOS 6.1
iPhone 4                                       iOS 6.1
iPhone 4S                                    iOS 6.1
iPhone 5                                       iOS 6.1
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1
iPod Touch 5                               iOS 6.1
iPad 1                                           iOS 5.1.1
iPad 2                                           iOS 6.1
iPad 3                                           iOS 6.1
iPad 4                                           iOS 6.1
iPad Mini                                      iOS 6.1
You cannot upgrade wirelessly until after you install iOS 5 or later.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

I bought rango and i can not see the movie in my account anymore

i had 3 movies on my account I redeem them but now I only see 2 of them how can I see the other one, I just change my laptop

If your country allows you to re download past Movies (Not all do) then go to iTunes Store, Click on the Purchased link from under the Quick Links section on the right. Navigate tto the Movie Section, find your fil and click on the cloud icon to download at no extra cost.
If you do not see the Movie Option then Re-Downloading is not allowed in your country by the Content owners so Apple can not show it

HT3625 i can not see the line in/built in input on the menu?do you know why?

i can not see the line in/built in input on the menu?does anyone know why?
i am trying to broadcast a live dj mixing but with the set up, i cant find the lin in input not even on the menue.
any clues will be appreciated.

see shots from '11 to '12 going forward.

Can not see the report in report manager/admin tab

Hi,
in 8.49 on Win 2003 some users can not see the reports in report manager/admin tab. PS user can see them.
Should we add some grants in user profile ? Which ? Any query to compare that user profile with PS ?
Thank you.

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

Final user's can not see the data due to limited authorization.

We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location 0RT_LOCATIO.
0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
Does anyone how to do this (if possible)?
Thanks in advance!

Just do two things to find the authorization check failed for that user.
1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
Do this way, if it is not successful you can go for any other alternate way.
Hope this would help you.

Can not see the menu of New Business Components Package in jdeveloper

I am just follow the developer guide.
and when I create the Business Components Package, the guide said that
========================================
In the JDeveloper Navigator, select the OA Project where you want to create your package.
From the main menu, choose File > New to open the New Object Gallery.
In the Categories tree, expand the Business Tier node, and select Business Components (BC4J).
In the Items list, select Business Components Package to open the Business Components Package Wizard. You can also right-click on the OA Project and select New Business Components Package to navigate directly to the Business Components Package Wizard.
=====================================
In fact I can not see the menu about Business Components (BC4J) in the File/new/buisness tier/Business Components (BC4J).
I can only see the File/new/buisness tier/ADF Business Components.
And can not find the "Business Components Package" under ADF Business Components either.
I am using the JDev Extension for OA (p5856648_R12_GENERIC.zip) and EBS 12.0.0.
And I create an OA Workspace and OA Project.
can anyone help?

James,
Use search facility on forum. Chk thread Re: OAF Toolbox Tutorial Help - Search
--Shiv

Alert Subscription : I do not see the Alert categories

Similar Messages

Maybe you are looking for