Alerts not working when "reply" is used

When I get a reply to a sms text, there is no alert, only the led flashes. I do not have alerts turned off. They work fine, when the message originates from the sender.

Can u give us the details like which component you are using for alerts.

Similar Messages

Form in Dynamic page not working when checkbox is used.

I have created a form using dynamic page. The form most have display fields and a checkbox field. When I check a box, it assigns 'Y' value and when unclick, it assign 'N' to the database field.
When I submit the form, the procedure which is supposed to save the form data never gets executed. Well, at least it says, page not found HTTP 404 error.
Interestingly if I make this field a text box and manually enter 'Y' or 'N', and then submit the form, the procedure is executed. Data gets saved.
Is the checkbox not supposed to be used for a database field because checkbox value can be assigned only using javascript and the procedure never get that value ?
Can you please tell me how to use a checkbox for a database field using dynamic page ?
thanks,
Mainak

Sharmila,
When I said, the form does not get submitted, I meant that the procedure does not work. The form gets submitted but the procedure does not work. It gives HTTP 404 error. That is what perplexes me. I am unable to understand why the procedure does not work when I click a checkbox.
May be you can make this work. I am hopeless about this.
Here is the code for the procedure sumbit_form:
NOTE: I ADDED TWO FIELDS CALLED PROMOT VARCHAR2(1), PROMOTID NUMBER(4) TO THE EMP TABLE AND CREATED A NEW TABLE CALLED PROMOTEMP. THIS IS A TEST CASE.
create or replace procedure sumbit_form
(p_empno IN portal30.wwv_utl_api_types.vc_arr, p_promot IN portal30.wwv_utl_api_types.vc_arr, p_action IN VARCHAR2)
is
begin
if p_action = 'save' then
for i in 1..p_empno.count LOOP
update scott.promotemp
set promot = p_promot(i)
where empno = p_empno(i);
END LOOP;
end if;
commit;
htp.p('<b>Saved Successfully</b>');
htp.p('<table border=1 bordercolor="red">');
for c1 in (select * from promotemp where promot='Y')
LOOP
htp.p('<tr><td>');
htp.p(c1.ename);
htp.p('</td><td>');
htp.p(c1.job);
htp.p('</td><td>');
htp.p(c1.mgr);
htp.p('</td><td>');
htp.p(c1.sal);
htp.p('</td><td>');
htp.p(c1.deptno);
htp.p('</td></tr>');
end loop;
htp.p('</table>');
EXCEPTION
when others then
raise;
end;
Here is the code for the dynamic page.
<HTML>
<HEAD>
<TITLE>Promot Emp</TITLE>
<script language="JavaScript1.1">
function include(form) {
var thisform = form;
for (var i=0; i<thisform.length; i++) {
     if (thisform.elements.type == 'checkbox') {
          if (thisform.elements[i].checked) {
               thisform.elements[i].value = 'Y'; }
          else { thisform.elements[i].value = 'N'; }
form.submit();
function show(form) {
var thisform = form;
for (var i=0; i<thisform.length; i++) {
     if (thisform.elements[i].type == 'checkbox') {
          if (thisform.elements[i].value = 'Y') {
               thisform.elements[i].checked = true; }
          else { thisform.elements[i].checked = false; }
</script>
</HEAD>
<BODY>
<FORM action="scott.sumbit_form" method="post">
<table border=1 bordercolor="red">
<tr>
<td> </td>
<td>Name</td>
<td>Job</td>
<td>Manager</td>
<td>Hire Date</td>
<td>Commission</td>
<td>Department#</td>
<td>Include</td>
</tr>
<ORACLE>declare
i number;
begin
i := 0;
for c1 in (select * from scott.promotemp where promotid = :promotid)
loop
htp.p('<tr><td>');
htp.p('<input type="hidden" name="p_empno" value='||c1.empno||'>');
htp.p('</td><td>');
htp.p(c1.ename);
htp.p('</td><td>');
htp.p(c1.job);
htp.p('</td><td>');
htp.p(c1.mgr);
htp.p('</td><td>');
htp.p(c1.hiredate);
htp.p('</td><td>');
htp.p(c1.comm);
htp.p('</td><td>');
htp.p(c1.deptno);
htp.p('</td><td>');
if (c1.promot = 'Y') then
htp.p('<SELECT NAME="p_promot" SIZE="1">
<OPTION SELECTED VALUE="'||c1.promot||'">Yes
<OPTION VALUE="N">No
</SELECT>');
else
htp.p('<SELECT NAME="p_promot" SIZE="1">
<OPTION SELECTED VALUE="'||c1.promot||'">No
<OPTION VALUE="Y">Yes
</SELECT>');
end if;
htp.p('</td></tr>');
end loop;
htp.p('</table>');
htp.p('<input type="submit" value="save" name="p_action">');
end;
</ORACLE>
</form>
</BODY>
</HTML>
thanks,
Mainak

Youtube does not work when i am using wifi on iphone 4

the youtube does not work when i use wifi. it works perfectly when i use 3 g network ..

At home when i use my Wi-Fi it work normal, but as soon as i go out, for example on the bus or at work it keeps saying "Cannot connect to Youtube".

Alerts not working when formula is in the cell

I am having a problem where my alerts are not working in the preview mode. They work fine when I hard code the alert range. But I need the alert to change under differnt conditions and I am using an IF statement
the formula is simple
=IF('TXF Inputs'!D27=3, C34/2, C34)
output is either 0.375 or 0.375/2 = 0.1875
if i hardcode the cell with either of these values the alert works, but it does not work with the formula. The confusing part is that I have other alerts that have IF statements in them and they all work.
They also work fine in the main screen, ie it shows yellow if my default values =0.1875, but then when I preview or publish they don't work
bw

Can u give us the details like which component you are using for alerts.

Drag and drop not working when uploading file using safari

why i cannot drag and drop any file when using safari , and what happens the file auotmatically open while i need to upload it only , extra for that , i cannot write any remark or fill a space while using website related to my work.
my work is to upload drawing files using dwf file to a website so the other parties can review and give me review , and then i reply to the remark at the same place and make meeting through the same site.
please any body can give any way to correct my mac.
latelly i installed win7 only to use it for that website , and iam now changing from mac to win whenever i want to work , this not acceptable to me because it is waste of time beside i like the mac and it working with other application but not for safari.

why ?
I'm sorry, but every OS is different. You cannot expect all features of one to be in another. Or alternatively, for similar features, be done it the exact same way.
It looks to me after a quick google search that winexplorer is basically the moral equivalent of the mac's finder to present the file system in different ways. The OSX Finder also has alternative views of the file system, i.e., icons, list, columns. Experiment with the list and column views and see if one of them are more to your liking.
As for winexplorer on the mac. I don't know if this simulates it or not but there is a program called Macintosh Explorer so check that out as well.
And finally, in the end, as I said in my earlier post, no matter what, nothing on the mac is going to change what I believe you think you can do and drop a file on a browser window and expect it to upload.

Lookup expression is not working when I am using with in the rectangle box in SSRS

I have two datasets with common member is ProgramID.
I have followed the below steps,
1. Added one table (2x2) and mapped this table to dataset1. After that I have removed top row.
That means I am maintaing only data row.
2. Added group to the table (ProgramID). Now the programid is sitting at cell#(1,1) and cell#(1,2) is blank
3. I have verified the report with preview and able to see the data for my all programs. I have 5 programs
4. my plan is adding chart and matrix reports to cell# (1,2). If I am adding chart/matrix to the cell#(1,2) then we can't contol the cell alignments in terms of height x width.
To resolve that problem, I have added one rectangle control to the cell#(1,2) then I have added my chart and matrix report
5. After completing the report, I have verified with preview and able to see the reports (chart/matrix) for all my 5 programs by page wise (note: I have provided page break before for my rectangle)
6. Till this point, I have no issues
7. Now, I have added one more row under the group. so, we have our main table (2x2). Becuase of programId group we can only see 3 cells in total table (cell# (1,1) =ProgramId cell#(1,2)=chart and matix reports under rectangle box; cell#(2,1)=already
merged with ProgramID group; cell#(2,2)= planned to add one more rectanlge and add two reports (chart and matrix)
8. Now, i have added rectangle to cell#(2,2) then added chart and matrix reports within the rectangle.
9. cell#(2,2) reports are needs to extract the data from dataset-2. Here we have common member is ProgramID (ds-1,ds-2)
10. First I have tested for matrix report by adding lookup expression
      Matrix report (2x2)
     row-1: Cell(1,1)= Gender report heading ; cell(1,2)=Month (column group)
     Note: month is also common member in both the datasets.
     row-2: cell(2,1)-- =Lookup(Programid.value, Programid.value,Gender.value,"Dataset2") (Gender data is Male and Female)
                Cell(2,2) -- empty for now
11. I have tried to preview the report and able to see the report without any issues and below are observations
        main Table (2 x2)
         Cell# (1,1) = ProgramID --Returning all 5 programs properly
         Cell# (1,2) = Dataset1 related report (chart and matrix reports under rectangle) -- able to see without any issues
         Cell#(2,1) = We already know this is merged cell. i.e menas ProgramID dispalying
          Cell#(2,2)= Only Male record is dispalying in the matrix report which is under rectanlge (here we have applied Lookup expression.
Note: male is the first record from the database and Female is the second record
Also, observed that Cell#(2,2) matrix report is unable to display the gender count information when I have provided count value expression in the cell(2,2) within the matrix and the expression I have uses is
= sum(Lookup(ProgramId.value,ProgramId.value,GenderCOunt.value,"Dataset2"))
Please ask me if I am unable to explain or lengthy explain.
Point : Why the lookup expression is giving the first record only (in case of gender #(male, female) and why it is unable to give the gendercount. Gendercount cell is totally blank.
Please help me.
Kishore.

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Syncronize Camera RAW not working when Auto is used

I have a problem with settings not being updated in Camera RAW when using the 'Auto' function.
I have to equalize exposure on a large number of RAW files (often 500+). The Auto function would be great, if it would only apply to the Exposure and not the other settings like contrast.
To reproduce:
Open 20 RAW files
Select all images
Click 'auto' under the 'tint slider'
Observe that settings change on all images
Now change any of the following settings (but NOT the Exposure slider!):
- Contrast
- Highlights
- Shadows
- Whites
- Blacks
Problem: only the settings on the first image are updated, the other images are not edited.
When you change the Exposure slider, the other settings are updated (probably because the 'auto' mode is disabled).
I have uploaded a small screen recording of this problem here https://www.youtube.com/watch?v=jGx6wV5v774&feature=youtu.be
Using 'Synchronize' it is also not possible to copy over the settings to all images.
I contacted Adobe over the phone, but they can only give the usual nonsense (reset your preferences, reinstall Photoshop, etc).
I see other people with the same problem, did anybody find a solution or a workaround?

You now slide it up to open the camera instead of tapping.

SPARQL query through Jena adaptor not work when string literals used

Hi,
When I executed the following SPARQL query through Oracle Jena adaptor:
SELECT ?personHasFirstName WHERE
{?personHasFirstName foaf:firstName ?name . }
I got the expected results.
However it won't return anything when I narrowed the query to match a particular name like below:
SELECT ?personHasFirstName WHERE
{?personHasFirstName foaf:firstName \"Julie\" . }
I also tried the Filter approach:
SELECT ?personHasFirstName WHERE {?personHasFirstName foaf:firstName ?name . FILTER (?name =\"Julie\") }
It still doesn't return any results.
I saw from the release notes about the bug dealing with "\". My guess is that the above behavior is caused by that bug. What is the suggested way to walk-around this? Thanks,
Weihua

Could you please try this? It works as expected on my machine.
GraphOracleSem graph = new GraphOracleSem( oracle, modelName);
ModelOracleSem model = new ModelOracleSem(graph);
Node sub = Node.createURI("http://test.com/employee123");
Node pre = Node.createURI("http://xmlns.com/foaf/0.1/firstName");
Node obj = Node.createLiteral("Julie");
graph.add(Triple.create(sub, pre, obj));
String queryString =
" PREFIX foaf: <http://xmlns.com/foaf/0.1/> " +
"SELECT ?person WHERE { ?person foaf:firstName \"Julie\" . } ";
QueryExecution qexec = QueryExecutionFactory.create(
QueryFactory.create(queryString), model);
try {
ResultSet results = qexec.execSelect();
while (results.hasNext()) {
QuerySolution soln = results.nextSolution();
psOut.println("runQuery: soln " + soln);
finally {
if (qexec != null)
qexec.close();
output snippet:
runQuery: soln ( ?person = <http://test.com/employee123> )

Dynamic record group not working when apostrophes are used

Hi Everyone,
I have developed a Form for the most part everything is working as expected. However, there is a search functionality that is giving me problems. The issue is that when the user enters search criteria for last_name that has an apostrophe (O'brian) the search lov doesn't get populated because the dynamic record group is not getting created when the string has an apostrophe (ie O'brian). I have a dynamic record group that takes the user's search criteria and populates an LOV on the screen with the records that matched their criteria.
Here is the code that is behind my search button where the dynamic RG gets created. It works fine for all searches that don't contain an apostrophe. Btw, the Oracle Forms version is 10g.
DECLARE
p_where_debtor varchar2(2000);
p_where_liab varchar2(2000);
rg_id RecordGroup;
v_query varchar2(2000) := null;
rg_name varchar2(2000):= 'RG_LIAB_LST';
errcode NUMBER;
BEGIN
IF :SEARCH.cd_nb is null and
:SEARCH.cd_seq is null and
:SEARCH.f_name is null and
:SEARCH.l_name is null and
:SEARCH.mi_name is null
then
display_message ('Search criteria must be entered');
raise form_trigger_failure;
END IF;
v_query := 'SELECT last_name, first_name, middle_name, c_no, c_seq
FROM TABLE_VW2 WHERE 1=1';
/*Search criteria entered by user*/
IF :SEARCH.l_name_srch IS NOT NULL THEN
v_query := v_query||' AND UPPER(last_name) LIKE '''||UPPER(:SEARCH.l_name)||'%''';
END IF;
IF :SEARCH.f_name_srch IS NOT NULL THEN
v_query := v_query||' AND UPPER(first_name) LIKE '''||UPPER(:SEARCH.f_name)||'%''';
END IF;
IF :SEARCH.mi_srch IS NOT NULL THEN
v_query := v_query||' AND UPPER(middle_name) LIKE '''||UPPER(:SEARCH.mi_name)||'%''';
END IF;
IF :SEARCH.cdcs_nbr_srch IS NOT NULL THEN
v_query := v_query||' AND UPPER(c_no) LIKE '''||UPPER(:SEARCH.cd_nb)||'%''';
END IF;
IF :SEARCH.cdcs_seq_srch IS NOT NULL THEN
v_query := v_query||' AND UPPER(c_seq) LIKE '''||UPPER(:SEARCH.cd_seq)||'%''';
END IF;
/*Make sure record group doesn't exisit*/
rg_id := Find_Group(rg_name);
/*If it doesn't exist then create record group*/
IF id_null(rg_id) THEN
rg_id:= create_group_from_query(rg_name,v_query);
END IF;
IF NOT id_null (rg_id) THEN
delete_group (rg_id);
rg_id:= create_group_from_query(rg_name, v_query);
END IF;
errcode := Populate_Group(rg_id);
Any help would be greatly appreciated.
Thanks,
Adrian

For every item where an apostroph can occur, do a
REPLACE(:BLOCK.ITEM, '''', '''''');

RCOUNT not working when SORT is used.

Hi Everyone,
I have a table report, and at the bottom of the page i want to have the total distinct of row counts.
Department Name Emp ID Emp Name Phone
Sales 11111 abc xxx-xxx-9999
Sales 23335 xyz xxx-xxx-9939
ITD 01235 ddd xxx-388-3999
Accounting 10000 hgg xxx-388-9299
Accounting 02020 qqq xxx-123-3355
Total of Departments : 03 (I'm using RCOUNT for this and put it in the narrative)
It works as default but if i click on Emp Name to sort then the Total of Departments will show the count of emp name which is 5 in this case.
Has anyone had any solution for this?
Thanks.

Why can't you use COUNT DISTINCT in column properties? (instead of default)...
Bring a new column (any column)...edit its formula and add COUNT with brackets wrapping column name - something like COUNT(Table.EmployeeName) - it should be better than RCOUNT

Pagecontext.forwardimmediatly not working when hashmap is used.

Hello,
I am trying to use as below:
HashMap hm = new HashMap(1);
hm.put("conc_called","YES");
pageContext.forwardImmediately("OA.jsp?page=/XXX/xxPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
hm,
true,
"N");
But i get an error message stating that the method doesn't exist. Any suggestions would be appreciated.
Thank You
PK

Ranjit,
That was awesome. You were able to figure out the issue even thought i haven't posted the import statement i have used for the hashmap. It worked now.
Thanks a lot!!

Keyboard backlighting not working when using Windows in Boot Camp

Hi, I'm posting this for a friend with a new Macbook Air. He says that his keyboard backlighting does not work when he is using it for Windows (don't know which, but probably Vista). Any ideas why? Thanks. Gary

Install all the drivers needed when running boot camp - try for example inserting a DVD - then press the eject key - See if it comes out - If it doesn't install all the drivers - try Control Panel - If not try re-installing your version of Windows.

Reply to all using ItemReply does not work when specifying messageid

Hello everyone,
I am trying to use the ItemReply token to perform a "Reply to All"
action on a mail item with a known message identifier and include the
original message text in the response. According to the documentation,
the call should be:
ItemReply(7;1;"message-id")
Still, when I execute this token, apparently only a normal reply action
is performed because only the original sender is listed as recipient.
(The message text is properly included)
However, when I manually select the message in the GroupWise client
first and then execute the same call without specifying the message id,
all recipients of the original mail are listed in "To:" as expected:
ItemReply(7;1)
Could it be that the "ReplyTo" parameter is ignored or does not work
when a message id is specified as parameter? (Setting "IncludeText" to 0
does not change anything)
Thanks in advance and best regards,
Peter Hofer

Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

>SystemPreferences>Network>DNS

Alerts not working when "reply" is used

Similar Messages

Maybe you are looking for