Align to pixel grid for new object does not work

I have set my document to align new objects (shapes) to pixel grid under the advanced settings
I have gone into the options on the transform panel and set the check box to say all new objects should also align to pixel grid
But when I create a shape it doesn't work, I end up with shapes with 3 digit decimal sub pixel sizes. eg. 34.536px
If I want an object to align to pixel grid I'm having to set it individually for each object.
Is this a bug that will get fixed or is there some work around, it's frustrating to have to set the feature for every single object I create

Align new Objects to pixel grid setting works perfectly for all tools in Adobe Illustrator CC (17). In Illustrator 2014 CC (18) the rectangle and rounded rectangle tool do not automatically align to pixel.
This thread says it's because of the new Live Rectangle tool objects are exempt from the Align to Pixel grid until you release them by expanding them.
Bug? Illustrator CC 2014 and Pixel Grid settings not working.
I'll be using the old version until Adobe 'fixes' this.

Similar Messages

My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm.

What if sync with new computer does not work. logical connection to old with WindowsXP, 32 bit version of iTunes. New is Windows7 with 64bit version

What if sync with new computer does not work?
logical connection to old with WindowsXP, 32 bit version of iTunes.
New is Windows7 with 64bit version

Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows

I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

Logfile monitoring for MSSQL ERRORLOG does not work with sapccmsr

Hi
We are running MSSQL2005 and wants to monitor the ERRORLOG for certain patterns, using the logfile monitoring feature of SAPCCMSR.
We are using logfile monitoring with sapccmsr for a lot of other logfiles without problems, but for ERRORLOG is does not work!
To be more precise: The agent does not report alerts for the text patterns specified. The agent runs fine and in RZ20 we can see that the logfile are checked every minute (but without finding the patterns).
The strange thing is that:
- It works for all other logfiles
- If we do a "type ERRORLOG >> <new file>" and runs the same monitoring on this "copy" of the ERRORLOG then it works
Any ideas?
Best regards
Tom Bo

Hi,
Please look at SAP note 1013331 https://service.sap.com/sap/support/notes/1013331.
In special the changes after patch collection 2007/5.
Practical you have to use a unicode CCMS Agent to monitor the ERRORLOG file of SQL2005, and add the "ENCODING=UTF-16" parameter in the template file....
hope this helps..
Regards
Rolf

Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?p

can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?

The problem is I cannot turn on wireless setting. The "sign in to icloud -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again. If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work. Vicious circle.

Why does right clinking on link and selecting open in new tab does not work?

Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

New tab does not work

"Open a new tab" does not work, nor does File/New Tab

This issue can be caused by the Ask.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbWCL2/3.12.2.16749
See:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution.

[svn:fx-trunk] 7473: Fix for 'ant asdoc' does not work.

Revision: 7473
Author:   [email protected]
Date:     2009-06-01 12:09:26 -0700 (Mon, 01 Jun 2009)
Log Message:
Fix for 'ant asdoc' does not work.
It should now work from both svn and package zip.
Bugs: SDK-15306
QE Notes: None.
Doc Notes: None.
tests: checkintests
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15306
Modified Paths:
    flex/sdk/trunk/asdoc/build.xml
    flex/sdk/trunk/build.xml

HT3702 how do I cancel an application that I am being billed for monthly that does not work

How do I cancel an application that I am being billed for monthly that does not work anymore?

How to report an issue with Your iTunes Store purchase
iTunes Store: Purchasing and managing auto-renewing subscriptions

BUG - Align to pixel grid fails when object is on artboard edge.

When I am positioning an object (a rectangle, for instance) and am attempting to position it along the right edge of the artboard, with Snap to Pixel turned on, as I drag the rectangle down the artboard edge, the object no longer snaps to pixel.
Related bug, you can't turn off snap to artboard edge. Not sure why.
Illustrator CS5 on a Mac.

Align new Objects to pixel grid setting works perfectly for all tools in Adobe Illustrator CC (17). In Illustrator 2014 CC (18) the rectangle and rounded rectangle tool do not automatically align to pixel.
This thread says it's because of the new Live Rectangle tool objects are exempt from the Align to Pixel grid until you release them by expanding them.
Bug? Illustrator CC 2014 and Pixel Grid settings not working.
I'll be using the old version until Adobe 'fixes' this.

New Release QuickVPN client 1.4.0.5 for windows 7 does not work????

New release of QuickVPN client version 1.4.0.5 for windows 7 is not working properly.
We can not connect; instead we receive this message:
"Remote Gateway is not responding, do you want to wait?"
Dear Cisco,,,,
Your release is not complete; please correct issue and advise after it has been tested.
Rgds, EM

Hi, first disable this POLSTORE.DLL again in your QuickVPN-Folder. Then start in this folder IPSEC.MSC and than IPSEC.EXE. You should get from IPSEC.EXE the error above. If not, than any other problem you have. Follow all the hints here in this thread.
If you get the same error above, than enable this POLSTORE.DLL again and start the IPSEC.EXE. You get the full info what has been gone. And within the IPSEC-Window for Local Computer you may find this FREESWAN-setting.
B.t.w. before I went this way I did export and import the IPSEC-settings from the XP-machine, as it was hinted some posts earlyer. But the way I have gone, works also with manualy deleting the FREESWAN config. With the IPSEC.EXE it will new generated in any case.
When you start via QuickVPN you may monitor also what happens within this IPSEC for Local Computer. Press F5 to keep it aktual.
From time to time the connection gets only succeeded after the second and more times. I have a very slow UMTS Internet-Access.
Juergen
Adding: These effects, getting not connected, first and during the VPN-Tunnel exists, has not changed since the top-first Version of Quick-VPN.
Dear customer, be patient, don't care about these stupid messages, click again or when the connection allready has succeeded through the VPN-tunnel do what you did like to do.
...... and again, with which configuration-scenario do the guys at Cisco test and develop .....
Fortunately, I never was a Cisco partner, only a poor user ;)

Align to pixel grid for new object does not work

Similar Messages

Maybe you are looking for